- Add MOVI command and routine for the LPI migration
- Allow to search for the ITS device descriptor using
not only devID but also LPI number.
- Bind SPIs in the Distributor
- Don't bind its_dev to collection. Keep track of the collection
IDs for each LPI.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5231
- Change locks' names to be more suitable
- Don't use blocking mutex. Lock only basic operations such
as lists or bitmaps modifications.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5230
This should be done by routing all interrupts to CPU0,
different assignment will be induced by either interrupts
shuffling or bus_bind_intr().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5229
pmc_hook() was called only in case of the stray interrupt but should
rather be called on each interrupt. Move in to the arm_cpu_intr()
handler, out of the critical section too.
Reviewed by: br
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5161
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5122
Separate interrupt descriptors lookup from allocation. It was possible
to perform config on non-existing interrupt simply by allocating spurious
descriptor.
Must lock the interrupt descriptors table lookup to avoid mismatches.
This ought to prevent trouble while setting up new interrupt
and dispatching existing one.
Use spin mutex rather than sleep mutex. This is mainly due to lock in
arm_dispatch_intr.
This should be eventually changed to a lock-less solution without
walking through a linked list on each interrupt.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5121
xn_ifp is allocated in create_netdev with if_alloc(IFT_ETHER).
According to the current arrangement it can't be NULL.
Coverity ID: 1349805
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5252
The variable error is assigned to 0 before entering the switch.
Assigning error to 0 before break pointless rewrites the real error
value that should be returned.
Coverity ID: 1304974
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5250
This fixes operation in QEMU and saves some booting time as well.
Pointed out by: Sagar Karandikar <skarandikar@berkeley.edu>
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
the sign bit doesn't cause an overflow. The overflow manifests itself
as a sorting index wrap around in the middle of the sorted array,
which is not a problem for the LRO code, but might be a problem for
the logic inside qsort().
Reviewed by: gnn @
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D5239
pmap_unmapdev respectively) so that resources are properly managed.
This is work originally done by kan@. Stanislav picked it up as part
of his Mediatek SoC work.
Tested:
* Carambola2, AR933x SoC
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan
Differential Revision: https://reviews.freebsd.org/D5184
This was originall done by kan@.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan
Differential Revision: https://reviews.freebsd.org/D5184
This is a prelude to intr-ng support for MIPS boards that need it -
notably the CI20 port from kan@ that's upcoming, but also work that
Stanislav is doing for the Mediatek platforms.
This is the initial platform dependent bits in include/intr.h, some
#defines for the nexus code for the intrng initialisation/runtime
bits, some changed naming (which I'll fix later to be the same, much
like what I did for ARM intr-ng) in exception.S, and the first cut
at a PIC.
Stanislav and I refactored out the common code for intrng support,
so the mips intrng definitions are quite small (sys/mips/include/intr.h.)
This is all work done by kan@, which stanislav has been cherry picking
into common code for his mediatek chipset work.
Tested:
* Carambola2 - no regressions (not intr-ng though!)
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan (original author)
Differential Revision: https://reviews.freebsd.org/D5182
As of r294068 boot1.efi can load loader.efi from ZFS.
As of r295320 boot1.efi prefers to load loader.efi from the same device
it was loaded from.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This is ongoing work from Damjan Jovanovic to improve ext4 read support
with sparse files:
Keep track of the first and last block in each extent as it descends down
the extent tree, thus being able to work out that some blocks are sparse
earlier. This solves an issue on r293680.
In ext4_bmapext() start supporting the runb parameter, which appears to be
the number of adjacent blocks prior to the block being converted in the
same way that runp is the number of blocks after, speding up random access
to mmaped files.
PR: 206652
Tools removed from the list are now provided by the ELF Tool Chain
project and are not controlled by the WITHOUT_BINUTILS_BOOTSTRAP knob.
Sponsored by: The FreeBSD Foundation
Replace the hw.ntb.enable_writecombine tunable with
hw.ntb.default_mw_pat. It can be set with several specific numerical
values to select a caching type. Any bogus value is treated as
Uncacheable (UC).
The ntb_mw_set_wc() KPI has removed the restriction that the selected
mode must be one of UC, WC, or WB.
Sponsored by: EMC / Isilon Storage Division
before calling dd to defeat a race when writing out to the geom_gate(4)
device
MFC after: 1 month
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division
When a user defines "jail_list" in rc.conf the jails are started in the
order defined. Currently the jails are not are stopped in reverse order
which may break dependencies between jails/services and prevent a clean
shutdown. The new parameter "jail_reverse_stop" will shutdown jails in
"jail_list" in reverse order when set to "YES".
Please note that this does not affect manual invocation of the jail rc
script. If a user runs the command
# service jail stop jail1 jail2 jail3
the jails will be stopped in exactly the order specified regardless of
jail_reverse_stop being defined in rc.conf.
PR: 196152
Approved by: jamie
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5233
The IOCTL is used by 'ifconfig -v' to show SFP+/QSFP+ information
including inventory information and dianostics (temperature, light
levels, voltage etc).
Reviewed by: gnn,melifaro
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D5240
The services db is created as a temporary file that is moved over the
existing file after completion. Thus there is no need to immediately
flush all created db records to the temporary file.
This speeds up creation of the services db by a factor of 500 on my
ZFS based /var/db filesytem (from 110 seconds to 0.235 seconds).
MFC after: 1 week
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
