(2) Check for ENOENT when checking for /var/db/mountdtab
(3) Remove a signal handler that called broken functions.
(4) Remove the broken functions.
Submitted by: Martin Blapp <mb@imp.ch>
Reviewed by: bde (1), billf ([234])
option and add explicit option to bind to the wildcard address. The
default is to bind to the wildcard address when no -h option has been
specified and thus backwards compatibility is maintained.
PR: kern/13049
Reviewed by: David Malone <dwmalone@maths.tcd.ie>
Submitted by: Matt Dillon <dillon@freebsd.org>, David Malone <dwmalone@maths.tcd.ie>
camcontrol was setup to use the old scheme of going through the xpt(4)
device, which never worked properly (and has been disabled for a while).
camcontrol now sends BDRs through the pass(4) device, and XPT_RESET_DEV
CCBs are put on the device queue in the transport layer, as they should be.
Submitted by: luoqi
Reviewed by: ken
1. Get rid of the evilly bogus strdup(fstab) and free if (fstab == "")
as in umount.
2. Don't use /etc/fstab info if the mount instance does not exactly match
the fstab entry.
3. Reversed the mountpoint checking order in getmntpt().
4. Clarify the "not mounted" error message in mount -u. The previous
"unknown special file or file system" wasn't quite right.
5. Get rid of a 1-byte memory leak; this was reported by jhb.
Submitted by: Martin Blapp <mb@imp.ch>
Delete references to cam(9) and xpt(9) which do not exist.
Delete statement in BUGS that cam(9) and xpt(9) will be added soon.
PR: 14567
Submitted by: Ronald F. Guilmette <rfg@monkeys.com>
Approved by: ken
- Completly changed the internals of umount(8). We do three
checks now to see if 'argv' is in the mounttable. It they
all fail, we return to main and print a warning.
- fixed the umount mount-order. The checks are rather complex
to do this. Cause umount(8) should also be able to unmount
several devices at once ('umount -a', 'umount -A',
'umount /mnt /mnt2'), the mount-order get's important.
I added checks to mark and unmark already unmounted devices.
- Various fixes with nfs-unmounts (no rpc-calls were done,
or they were done although there was an existing mount).
Since we allow overlay-mounts, we should also handle them
properly.
- Translate the deprecated nfs-syntax with '@' to ':' like
mount_nfs does. The ':' syntax has now precedence, but '@'
still works.
- 'umount -v' is now fixed for all cases and doesn't print
garbage like two times the mountpoint etc.
- removed non documented and useless umount '-F'.
- hanged nfsmounts can now unmounted 'without' any problems.
I've removed stat() and realpath() checks on the mountpoint.
Instead we just do a realpath() on the basedir of the
mountpath and add the dirname again.
Implemented this as an idea from phk. But there are still
vfs-restrictions if the nfs_mount is busy. If there are
unwritten metadata on a hanged nfs-mount, and we modify
nfs_vfsops.c to not return EBUSY, we get a deadlock :(
The problem has now moved from userland to kernel.
- removed the BUGS part from the umount(8) manpage.
- Converted it to ANSI C (more than 60% of the code have
changed).
Martin_Blapp
Fixed PR's
----------
o [1999/02/03] bin/9893 NFS umount of regular file impossible
s [1995/11/27] bin/841 stale nfs mounts cannot be umounted
o [1999/08/01] bin/12911 alfred NFS umounts are not properly done
if just the mountpoint gets umounted
Only partially solved:
----------------------
The problem is now in kernel:
o [1999/04/07] bin/11005 `umount -f' does not work if the
NFS-server is down.
PR: bin/9893 bin/841 bin/12911 bin/11005
Submitted by: Martin Blapp <mb@imp.ch>
interface limits it to this anyway.
Change the name of the v flag variable from 'verbose' to 'vflag',
indicating the multiple use (verbose or verify).
Add -S flag to specify the size of some operations.
indicating the multiple use (verbose or verify).
vinum_ldi:
Show active requests for the drive if -v is specified.
White space cleanup.
vinum_lsi:
Show the progress of an init command if -v is specified.
vinum_info:
Print the number of active requests.
Print out loginfo_sdio and loginfo_sdiodone log entries.
indicating the multiple use (verbose or verify).
initsd: rewrite:
Initialization is now done in the kernel.
Verify (again!) if -v is specified.
Allow specification of a blocksize, the length to be transferred in
one transfer.
vinum_revive:
Allow specification of a blocksize, the length to be transferred in
one transfer.
Made mount more userfriendly (bad slashes are now filtered out)
and we remove in mount_nfs trailing slashes if there are any.
Fixed mount_xxx binarys to resolve with realpath(3)
the mountpoint.
Translate the deprecated nfs-syntax with '@' to ':' .
The ':' syntax has now precedence, but '@' still works.
Notify the user that the '@' syntax should not be used.
PR: 7846
PR: 13692
Submitted by: Martin Blapp <mb@imp.ch>
Reviewed by: phk
Original patch from Adrian. Martin added a check for free().
- Included the filesystem type in output of mount
PR: bin/13143
Submitted-By: Martin Blapp <mblapp@kassiopeja.lan.attic.ch>
request.
Fix some uninitialized warnings and a style bug while we are here.
Problem still exists where a failed umount can be misreported as
success.
Submitted by: Martin Blapp <mb@imp.ch>
- Move intrhook stuff into kernel.h
- Remove all occurrences of #device <device.h>
- Add kernel.h were necessary (nowhere)
- delete device.h
This file contained the structures for cfdata (old style config) and is no
longer used. It was included by most drivers.
It confuses the remote debugger as the definition of 'struct device' in
device.h is found before the one in bus_private.h.
vinum_lpi: Add information about progress of rebuildparity and
checkparity commands.
listconfig: Print object counts in a different format, don't refer to
the internal number of slots allocated:
Caused-confusion-to: Norbert Meissner <norbert.meissner@daimlerchrysler.com>
vinum_info: Change format of device numbers so that they fit in the
column (ignore high-order minor number bits, which aren't really of
much interest).
vinum_start: bzero the statinfo.dinfo struct. The lack of this was
causing sporadic failures of the start command.
Add body of vinum_checkparity command.
CAM_PASS_ERR_RECOVER flag to be set unconditionally on READ DEFECTS
commands, and also caused the CAM_DIR_IN flag to not be set. This was
the cause of all of the "camcontrol defects doesn't work with my NCR
controller" bugs.
The second prevented camcontrol negotiate from negotiating any bus width
other than 8 bits.
Submitted by: groudier@club-internet.fr (Gerard Roudier)
