Commit Graph

742 Commits

Author SHA1 Message Date
Marcus Alves Grando
fa1d87f552 Allow to use Time DPA20B 1GB MP3 Player [1]
Allow to use Qware BeatZkey! Pro [2]

PR:             usb/81846 [1], usb/79164 [2]
Submitted by:   Ruben de Groot <rdg@bzerk.org> [1], Radek Kozlowski <radek@raadradd.com> [2]
Approved by:    njl
MFC:            1 week
2006-01-13 11:33:40 +00:00
Ian Dowse
d3ef345454 When deregistering a bus, attempt to flush out all outstanding
operations before returning. Point the bus at a dummy cam_sim
structure so that any CCBs will complete immediately with a
CAM_DEV_NOT_THERE status, and ensure that any xpt_schedule() calls
on the bus's devices will immediately call the peripheral's
periph_start() routine. Also repeat the async messages because
devices that were part of the way through being probed may appear
after the original AC_LOST_DEVICE was sent, and would otherwise
never go away.

These changes make it possible to deregister a bus and free the SIM
at most stages during bus probing without the usual crashes in
camisr(). In particular, plugging in a umass device and then
unplugging it as soon as the first probe messages appeared would
almost always result in a crash. Now the device just goes away with
a few CAM errors and all references to the CAM bus, target and
device are dropped correctly.
2006-01-11 02:06:08 +00:00
Ian Dowse
9a014e6f69 There should be no need to retry when the CCB status code is
CAM_LUN_INVALID or CAM_TID_INVALID. Retries were being triggered
here when a umass device was unplugged, and while the retries
themselves are probably harmless, they complicated finding the real
SIM removal problems.
2006-01-08 20:04:55 +00:00
Pawel Jakub Dawidek
1236085a67 Style nit. 2005-12-19 03:43:48 +00:00
Pawel Jakub Dawidek
ef5d77f464 Allow to use TransFlash drive, which can be found in Motorola E398 Mobile Phone.
PR:		usb/89889
Submitted by:	Wojciech A. Koszek <dunstan@freebsd.czest.pl>
MFC after:	1 week
2005-12-19 03:27:28 +00:00
John Polstra
a7e69e8b7d Fix a bug that caused some /dev entries to continue to exist after
the underlying drive had been hot-unplugged from the system.  Here
is a specific example.  Filesystem code had opened /dev/da1s1e.
Subsequently, the drive was hot-unplugged.  This (correctly) caused
all of the associated /dev/da1* entries to be deleted.  When the
filesystem later realized that the drive was gone it closed the
device, reducing the write-access counts to 0 on the geom providers
for da1s1e, da1s1, and da1.  This caused geom to re-taste the
providers, resulting in the devices being created again.  When the
drive was hot-plugged back in, it resulted in duplicate /dev entries
for da1s1e, da1s1, and da1.

This fix adds a new disk_gone() function which is called by CAM when a
drive goes away.  It orphans all of the providers associated with the
drive, setting an error condition of ENXIO in each one.  In addition,
we prevent a re-taste on last close for writing if an error condition
has been set in the provider.

Sponsored by:   Isilon Systems
Reviewed by:    phk
MFC after:      1 week
2005-11-18 02:43:49 +00:00
Matt Jacob
3b87a552e4 Make the exploring of all luns supported by an HBA more of a
tunable (until we get REPORT LUNS in place).

If we're probing luns, and each probe succeeds, we keep going past
lun 7 if we're a SCSI3 or better device (until we fail to probe).

If we're probing luns, and a probe fails, we only keep going if
we're quirked *for* it (CAM_QUIRK_HILUNS), and if we're not quirked
*against* it (CAM_QUIRK_NOHILUNS), or we're a SCSI3 or better device
and the tunable (kern.cam.cam_srch_hi) is set non-zero.

Reviewed by:	nate@rootlabs.org, gibbs@scsiguy.com, ken@kdm.com, scottl@samsco.org
MFC after:	1 week
2005-09-16 01:26:17 +00:00
Robert Watson
6a113b3de7 Merge the dev_clone and dev_clone_cred event handlers into a single
event handler, dev_clone, which accepts a credential argument.
Implementors of the event can ignore it if they're not interested,
and most do.  This avoids having multiple event handler types and
fall-back/precedence logic in devfs.

This changes the kernel API for /dev cloning, and may affect third
party packages containg cloning kernel modules.

Requested by:	phk
MFC after:	3 days
2005-08-08 19:55:32 +00:00
Suleiman Souhlal
571dcd15e2 Fix the recent panics/LORs/hangs created by my kqueue commit by:
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.

- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.

Reviewed by:	jmg
Approved by:	re (scottl), scottl (mentor override)
Pointyhat to:	ssouhlal
Will be happy:	everyone
2005-07-01 16:28:32 +00:00
Tai-hwa Liang
362abc449c - Providing fine-grained malloc statistic by replacing M_DEVBUF with
module-specific malloc types.  These should help us to pinpoint the
  possible memory leakage in the future.
- Implementing xpt_alloc_ccb_nowait() and replacing all malloc/free based
  CCB memory management with xpt_alloc_ccb[_nowait]/xpt_free_ccb.  Hopefully
  this would be helpful if someday we move the CCB allocator to use UMA
  instead of malloc().

Encouraged by:	jeffr, rwatson
Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
2005-07-01 15:21:30 +00:00
Tai-hwa Liang
7c20d5d795 Fixing a memory leak in xpt_release_device(), which can be quickly
(depends on how many memory you have) observed through "tar -tvf /dev/sa0."

   Without this patch, RELENG_5 and HEAD panics with something like:

     kmem_malloc(4096): kmem_map too small: 42258432 total allocated

   RELENG_4 doesn't panic but spews following errors:

     camq_init: - cannot malloc array!

Reviewed by:	gibbs, scottl
Approved by:	re (scottl)
MFC after:	3 days
2005-06-24 08:09:05 +00:00
Pawel Jakub Dawidek
965d0c7edc Add a quirk for my pen-drive. 2005-06-09 17:35:04 +00:00
Alexander Kabaev
693937214b Do not initialize path variable with useless value just before
xpt_create_path overwrites it anyway.

Noticed by:     Coverity Prevent analysis tool
2005-05-11 17:39:33 +00:00
Doug White
2891ace6c8 Add quirk for TEAC USB floppy drives. 2005-05-05 18:48:41 +00:00
Matt Jacob
e3e16e9998 Make sure we look at the correct sub op codes when
deciding whether it's an operation we can perform
via the control device.

PR:		kern/72010
MFC after:	1 week
2005-04-14 04:51:18 +00:00
Matt Jacob
cd6640869b Take constructive advice from njl && reformat
previously added quirks slightly.
2005-04-14 04:46:46 +00:00
Nate Lawson
bc82a81ab5 Quirk for ZICPlay USB MP3 Player.
PR:		kern/75057
Submitted by:	Aurelien Nephtali <aurelien.nephtali wanadoo.fr>
2005-04-14 04:31:48 +00:00
Matt Jacob
4a296eb866 Apply quirk.
PR:		57469
Submitted by:	walter@pelissero.de
MFC after:	1 week
2005-04-14 04:12:45 +00:00
Matt Jacob
dbd93079d3 Applied conservative version of suggested quirk.
PR:		57468
Submitted by:	walter@pelissero.de
MFC after:	1 week
2005-04-14 04:05:00 +00:00
Matt Jacob
b1ce2b3e22 Apply quirk suggested by submitter.
PR:		75486
Submitted by:	no_bs@web.de
MFC after:	1 week
2005-04-14 03:59:48 +00:00
Matt Jacob
8b11740052 The divide by zero panic must have been due to a bogus
period value. I suppose the BT adapter driver should be
fixed, but more importantly we should protect against
dividing by zero.

PR:		kern/75603
MFC after:	1 week
2005-04-14 03:52:50 +00:00
Sam Leffler
aadbcea379 avoid use after free
Submitted by:	gibbs
Reviewed by:	mdodd
Approved by:	Coverity Prevent analysis tool
2005-03-31 21:43:19 +00:00
Sam Leffler
ec04feb21b avoid use after free
Submitted by:	gibbs
Reviewed by:	mdodd
Noticed by:	Coverity Prevent analysis tool
2005-03-31 21:42:49 +00:00
Poul-Henning Kamp
f4f6abcb4e Explicitly hold a reference to the cdev we have just cloned. This
closes the race where the cdev was reclaimed before it ever made it
back to devfs lookup.
2005-03-31 12:19:44 +00:00
Kenneth D. Merry
53372d3a6d Fix a problem with the cd(4) driver -- the CAMGETPASSTHRU ioctl wouldn't
succeed if there was no media in the drive.

This was broken in rev 1.72 when the media check was added to cdioctl().

For now, check the ioctl group to decide whether to check for media or not.
(We only need to check for media on CD-specific ioctls.)

Reported by:	bland
MFC after:	3 days
2005-03-26 06:05:06 +00:00
Kenneth D. Merry
b3b73720f2 Fix a place where we were referencing a pointer after it had been freed.
Submitted by:	"Henry Miller" <hank@blackhole.com>
MFC after:	3 days
2005-03-26 04:21:11 +00:00
Justin T. Gibbs
df8f908079 Restore queue depth settings across tag disable events. The system often
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices.  Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.

During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices.  The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.

MFC: 3 days
2005-03-23 16:43:29 +00:00
Scott Long
e3f3b2ed9f Don't free the SIM object twice.
Submitted by: Coverity Prevent analysis tool
2005-03-19 06:32:57 +00:00
Scott Long
38cedb4414 Reference a pointer correctly when copying to it's location.
Submitted by: Coverity Prevent analysis tool
2005-02-21 00:28:36 +00:00
Scott Long
01910bab7d Check the correct periph pointer after search for it.
Submitted by: Coverity Prevent analysis tool
2005-02-20 23:51:20 +00:00
Scott Long
661658a6fa Protect against trying to free a non-existant peripheral.
Submitted by: Coverity Prevent analysis tool
MFC After: 3 days
2005-02-20 23:45:49 +00:00
Scott Long
ac8be89de5 Remove a shadow declaration of 'error' that caused certain tests to be
pointless.

Submitted by: Coverity Prevent analysis tool
2005-02-12 04:51:19 +00:00
Scott Long
ef3cf714a4 Provide locking for the ccb_bioq. This allows xpt_done() to be called without
Giant held.  In camisr(), move the ccb_bioq elements to a temporary local list
and then process the elements off of that list.  This enables the list to be
processed by only taking the ccb_bioq_lock once and only for a very short
time.

ccb_bioq_lock is a leaf mutex, so it's fine to call xpt_done() with other
locks held.  This is just a very minor step in the work to lock CAM, but
it allows us to avoid some messy locking/unlock dances in certain drivers.
2005-02-09 11:44:15 +00:00
Maxim Sobolev
4379219537 Boot away another stackgap (one of the lest ones in linuxlator/i386) by
providing special version of CDIOCREADSUBCHANNEL ioctl(), which assumes that
result has to be placed into kernel space not user space. In the long run
more generic solution has to be designed WRT emulating various ioctl()s
that operate on userspace buffers, but right now there is only one such
ioctl() is emulated, so that it makes little sense.

MFC after:	2 weeks
2005-01-30 08:12:37 +00:00
Michael Reifenberger
8924340f2f Add quirk for easyRAID ER5 alias areca ARC-6010.
It reports itself as SCSI-3 but doesnt like getting probed on  high luns
because it hangs hard after finding itself again on lun 32...

Suggested by: Kenneth Merry
2005-01-25 08:59:06 +00:00
Matt Jacob
f4322bc884 This is a somewhat imperfect means to try and bring FreeBSD forward in
its ability to automatically scan and attach luns for modern storage
which has luns in the 0..1000 range, not 0..7.

The correct thing would be to do REPORT LUNS for devices whose LUN0
version shows a version >= SCSI3, but lacking that we should be able
to search higher than LUN 7 if we're >= SCSI3 with no ill effects.

This change keeps all of the QUIRK_HILUNS quirks, obeys the QUIRK_NOLUNS,
and introduces a QUIRK_NOHILUNS which will keep searches above LUN 7
happening for devices that report >= SCSI3 compliance. I doubt the latter
will be needed, but you never know.

This allowed me to randomly scan and attach  > 500 disks at a time in
a situation where quirking for QUIRK_HILUNS wasn't practical (the
vendor id and product id changes of the virtualization changes
constantly).

Reviewed by:	ken@freebsd.org, scottl@freebsd.org, gibbs@freebsd.org
MFC after:	2 weeks
2005-01-22 22:46:45 +00:00
Matt Jacob
c81d2c74ac Don't pass unadulterated unit numbers to make_dev and its ilk- if you
have more than 256 units, you die. Horribly. Convert them using
unit2minor.

MFC after:	1 week
2005-01-22 07:21:25 +00:00
Warner Losh
898b0535b7 Start each of the license/copyright comments with /*- 2005-01-05 22:34:37 +00:00
Justin T. Gibbs
9a4f1a4dd4 Correct another location where inquiry length as calculated from the
inquiry additional length field is off by one.

MFC: 3 days
2004-11-18 07:24:29 +00:00
Justin T. Gibbs
709a936f1f Correct an off-by-one in the calculation of the inquiry buffer length
to request from devices during the "long inquiry" portion of our probe.
This same bug was fixed in the 4.x stream a few years ago, but the fix
was never propogated to -current.

This fix is slightly different than in -stable:

 o Use offsetof() instead of a hard coded constant so as the make
   the code more self-explainatory.

 o Round odd long inquiry lengths up so as to avoid tickling ignore
   wide residue bugs in broken parallel SCSI devices running with a
   wide transfer negotiation.

MFC: 3 days
2004-11-18 04:14:32 +00:00
Bruce M Simpson
23e0012d02 Remove references to the second byte of a CCB containing the LUN, as this
is valid only for SCSI-2 and older devices.
Rename the second byte of the VERIFY CCB from 'lun' to 'byte2'.

Submitted by:	ken
MFC after:	2 weeks
2004-10-13 09:31:04 +00:00
Bruce M Simpson
c68a9309c3 Add necessary data structures and definitions for the 12-byte SCSI
commands READ_FORMAT_CAPACITIES, WRITE_AND_VERIFY, and VERIFY.

Reviewed by:	ken, scottl
Source:		USB Mass Storage UFI Specification v1.0
MFC after:	2 weeks
2004-10-12 08:55:02 +00:00
Scott Long
2e8f0ae68c Remove the camnet swi and CAM_PERIPH_NET. It has never been used, and given
that netowrk-over-scsi never really took off, there is little chance that
it will ever be needed.
2004-10-05 04:22:20 +00:00
Poul-Henning Kamp
5ae652c0ed For removable devices without media we set a zero mediasize but a non-zero
sectorsize in order to avoid a lot of checks around various divisions etc.

Enforce the sectorsize being > 0 with a KASSERT on successful open.

Fix scsi_cd.c to return 2k sectors when no media inserted.
2004-09-05 21:15:58 +00:00
Justin T. Gibbs
74c91ec564 Correct a typo in a comment: alloation->allocation
Reported by: Jens Schweikhardt <schweikh@schweikhardt.net>
2004-08-30 20:14:21 +00:00
Dag-Erling Smørgrav
0eac4495db Remove the HW_WDOG option; it serves no purpose.
MFC after:	3 days
2004-08-29 11:10:09 +00:00
John-Mark Gurney
ad3b9257c2 Add locking to the kqueue subsystem. This also makes the kqueue subsystem
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers.  Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.

Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks.  Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).

Reviewed by:	green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
Matt Jacob
6e6a585e3f When printing out an unknown sense code we should print it in hex, not
decimal.

Reviewed by: gibbs, nate, kdm
2004-08-13 18:45:04 +00:00
MIHIRA Sanpei Yoshiro
58e8a8006a add support Frontier Labs NEX IA+ Digital Audio Player with USB CF card reader/writer
PR:		kern/70158
Submitted by:	Bernd Strau. <no_bs@web.de>
MFC after:	1 week
2004-08-12 23:17:09 +00:00
MIHIRA Sanpei Yoshiro
92c7375fb6 Add support iRiver iFP MP3 player
PR:		kern/54881, i386/63941, kern/66124
Submitted by:	Magnus <bsdhead.at.spray.dot.se@FreeBSD.org>,
		Dmitry Dyomin <old@old.com.ua>,
		Dmitry Sivachenko <mitya@demos.su>
MFC after:	1 week
2004-08-08 09:08:37 +00:00
MIHIRA Sanpei Yoshiro
ab625e4edf Quirk for SEGRAND NP-900 USB MP3Player
PR:		kern/64563
Submitted by:	Kunitada Kokubun <unix_grandy@yahoo.co.jp>
MFC after:	1 week
2004-07-18 05:39:14 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Marcel Moolenaar
124ea6b5ac Update for the KDB framework:
o  Call kdb_enter() instead of Debugger().
2004-07-10 20:56:43 +00:00
Paul Saab
2fc0389afc Revert rev 1.140, it was a bit pre-mature. 2004-06-21 19:01:55 +00:00
Paul Saab
11593f4318 Add a quirk for ciss to stop trying to read the serial number off
of logical volumes.
2004-06-21 18:34:30 +00:00
Poul-Henning Kamp
f3732fd15b Second half of the dev_t cleanup.
The big lines are:
	NODEV -> NULL
	NOUDEV -> NODEV
	udev_t -> dev_t
	udev2dev() -> findcdev()

Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
2004-06-17 17:16:53 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Scott Long
af693a70b1 Reformat the comments for cam_hdr so that they can be read. 2004-06-07 19:12:44 +00:00
Nate Lawson
d5ed156998 Quirk for Neuros USB audio device.
PR:		kern/63645
Submitted by:	Aron Stansvik <elvstone@osdever.net>
2004-05-02 19:24:23 +00:00
Maxime Henrion
9b64d23770 The opt_da.h file doesn't exist anymore since the DA_OLD_QUIRKS option
has been removed.  Unbreak the build by not including it anymore.
2004-04-19 13:38:10 +00:00
Nate Lawson
f663ded69d Add miscellaneous USB device quirks.
PR:		kern/53067
PR:		kern/54737
PR:		kern/54786
PR:		kern/57046

MFC after:	1 day
2004-04-19 04:14:09 +00:00
Nate Lawson
60305ca7c4 Remove all quirks hidden under DA_OLD_QUIRKS. 2004-04-19 03:34:28 +00:00
Colin Percival
59e758846f Compare the *number* of patterns to zero, not the *pointer* to the
patterns.  (These lines are correct the other two times they appear.)

Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor), ken (scsi)
2004-02-28 12:59:56 +00:00
Colin Percival
fa81466148 Check that periph is non-NULL before dereferencing it.
Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor), ken (scsi@)
2004-02-22 01:14:54 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Poul-Henning Kamp
0b7ed341e1 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
Johan Karlsson
8004412590 Fix type in comment, 's/writtent/written/'
PR:		56954
Submitted by:	Dan Langille <dan@langille.org>
2004-01-18 00:17:14 +00:00
Paul Saab
da0cc5d3ff Move the ciss quirk to the right section, also update the comment
stating that the controllers do not support SYNC CACHE since ciss
only supports a small subset of the scsi spec.
2003-12-08 06:29:38 +00:00
Paul Saab
284af83b2a ciss doesn't like scsi SYNC CACHE. turn it off 2003-12-08 05:14:13 +00:00
David E. O'Brien
0f5075bec4 SS_FATAL|ENXIO rather than SS_RDEF for illegal track mode.
This reduces the 90+ lines boot output of spewage GEOM does for my
Plextor SCSI burner.

Submitted by:	scottl
Approved by:	scottl
2003-12-01 10:13:00 +00:00
Seigo Tanimura
512824f8f7 - Implement selwakeuppri() which allows raising the priority of a
thread being waken up.  The thread waken up can run at a priority as
  high as after tsleep().

- Replace selwakeup()s with selwakeuppri()s and pass appropriate
  priorities.

- Add cv_broadcastpri() which raises the priority of the broadcast
  threads.  Used by selwakeuppri() if collision occurs.

Not objected in:	-arch, -current
2003-11-09 09:17:26 +00:00
Scott Long
68153f43b6 Sprinkle GIANT_REQUIRED asserts around the xpt layer to aid with locking the
SCSI drivers.
2003-11-09 02:22:33 +00:00
Scott Long
8226fdbdce Don't be so chatty when performing manual sense. This should make ATAPICAM
devices a lot more quiet.
2003-11-08 10:56:57 +00:00
Kenneth D. Merry
65afe1f454 In camperiphdone(), make sure we check for fatal errors and bail out
instead of retrying them blindly.

This should fix some of the problems people have been having with cdrom
drives taking a long time to probe.  This should also eliminate the need
for the initial TUR in cdsize().

cam_periph.c:	Don't keep retrying if the error we get back is a fatal
		error.  This should help us detect the transition from
		"Logical unit not ready, cause not reportable" to "Medium
		not present" in the "TUR many" handler.  (The TUR many
		handler gets triggered for Logical unit not ready, cause
		not reportable errors.)

scsi_cd.c:	Remove the initial test unit ready in cdsize().  Hopefully
		it isn't necessary after the above change.

Submitted by:	gibbs (mostly)
Tested by:	peter
MFC After:	2 weeks
2003-10-27 06:15:55 +00:00
Poul-Henning Kamp
24730dd78a Use bio_offset instead of bio_blkno 2003-10-18 17:26:13 +00:00
Poul-Henning Kamp
f485bd3a10 There is no need to muck about with the B_PHYS flag here. We never even
get close to DEV_STRATEGY() which is the only place it is relevant.
2003-10-18 11:01:11 +00:00
Thomas Quinot
28cd624700 (dacleanup, dasysctlinit): Defend against calling sysctl_ctx_free on
an uninitialized sysctl_ctx, using flag DA_FLAG_SCTX_INIT. This
 prevents a panic encoutered with some umass units that probe correctly
 but fail to attach. Same problem, and same fix, as scsi_cd.c rev. 1.86.

Reviewed by:	njl, ken
2003-10-08 07:12:30 +00:00
Thomas Quinot
09ece45849 (cdcleanup): Defend against calling sysctl_ctx_free before the sysctl_ctx
has been initialized.
(cdsysctlinit): Set flag CD_FLAG_SCTX_INIT after sysctl_ctx has been
 initialized.

This resolves a panic encountered when a cd drive is sucessfully probed
but fails to attach.

Reviewed by:	ken
2003-10-07 14:46:59 +00:00
Poul-Henning Kamp
ca803d52fd Add disk_destroy() call to detach processing.
Add short tempered TUR to cdsize() as a workaround.
2003-10-06 10:39:13 +00:00
Hidetoshi Shimokawa
9eb73373e7 Be kind to 64bit architectures. 2003-10-02 08:56:14 +00:00
Hidetoshi Shimokawa
60ddd2e45c - Pick up a correct path_id for the bus on AC_PATH_REGISTERED.
- Call cam_periph_invalidate() only if the periph is found.
2003-09-30 08:03:52 +00:00
Poul-Henning Kamp
2cac580671 GEOMify. 2003-09-30 07:52:15 +00:00
Hidetoshi Shimokawa
388f522d79 Detach black hole device on AC_PATH_DEREGISTERED. 2003-09-25 05:02:19 +00:00
Thomas Quinot
a035059fc1 (scsi_request_sense): Set allocation length in REQUEST_SENSE CCB.
Reviewed by:	ken
2003-09-21 08:45:36 +00:00
Thomas Quinot
86addc5271 (camperiphdone): When the cam_periph layer performs sense recovery,
completion of recovery is indicated by positioning the CAM_AUTOSNS_VALID
 bit in the status field of the CCB, not in the flags field.
This fixes an endless loop of sense recovery actions.

Reviewed by:	ken
2003-09-21 08:42:32 +00:00
Matt Jacob
53d0345138 I forgot whom I got this from- only set single initiator buffered mode
if we've recorded in our softc that we should set it.
2003-09-13 02:01:56 +00:00
Poul-Henning Kamp
0c7721e8f9 Disable the use of cloning use in floppy and CD drivers.
This commit puts the relevant code snippets under #ifdef GONE_IN_5
(rather than #ifndef BURN_BRIDGES) thereby disabling the code now.

The code wil be entirely removed before 5.2 unless we find reasons
why this would be a bad idea.

Approach suggested by:	imp
2003-09-11 19:27:24 +00:00
Alan Cox
8373f36dbb In case vmapbuf() fails, release all of the held resources.
Submitted by:	tegge
2003-09-10 18:23:43 +00:00
Poul-Henning Kamp
7837155fa2 Put the device cloning functions for disk-drivers under #ifndef BURN_BRIDGES.
For the floppy driver, use fdcontrol to manipulate density selection.

For the CD drivers, the 'a' and 'c' suffix is without actual effect and
any applications insisting on it can be satisfied with a symlink:
	ln -s /dev/cd0 /dev/cd0a

Ongoing discussion may result in these pieces of code being removed before
the 5-stable branch as opposed to after.
2003-09-05 10:40:16 +00:00
Nate Lawson
faf9513401 Calling KNOTE with locks held may result in recursion when it calls back
into targreadfilt().  Unlock around calls to notify_user().  If an application
is sending CCBs while the endpoint is shutting down, this may result in
incomplete disable.  A more complete solution will come with a "dying" flag.

Submitted by:	simokawa
2003-09-04 16:30:03 +00:00
Nate Lawson
5512662bdf Upon receiving a CCB for a LUN that is not enabled, be sure to unlock the
softc on exit.

Submitted by:	simokawa
2003-09-04 16:05:41 +00:00
Nate Lawson
f3e99b763a Remove the quirk for the FujiFilm camera. Submitter indicates it is now
working without the quirk.

PR:
Submitted by:	guido
Reviewed by:
Approved by:
Obtained from:
MFC after:	30 days
2003-09-04 01:01:20 +00:00
Kenneth D. Merry
700a0cbaca Unbreak buildworld. sys/taskqueue.h is a kernel-only include.
Pointy Hat to:	ken
2003-09-03 12:31:03 +00:00
Kenneth D. Merry
cb32189e23 Move dynamic sysctl(8) variable creation for the cd(4) and da(4) drivers
out of cdregister() and daregister(), which are run from interrupt context.

The sysctl code does blocking mallocs (M_WAITOK), which causes problems
if malloc(9) actually needs to sleep.

The eventual fix for this issue will involve moving the CAM probe process
inside a kernel thread.  For now, though, I have fixed the issue by moving
dynamic sysctl variable creation for these two drivers to a task queue
running in a kernel thread.

The existing task queues (taskqueue_swi and taskqueue_swi_giant) run in
software interrupt handlers, which wouldn't fix the problem at hand.  So I
have created a new task queue, taskqueue_thread, that runs inside a kernel
thread.  (It also runs outside of Giant -- clients must explicitly acquire
and release Giant in their taskqueue functions.)

scsi_cd.c:	Remove sysctl variable creation code from cdregister(), and
		move it to a new function, cdsysctlinit().  Queue
		cdsysctlinit() to the taskqueue_thread taskqueue once we
		have fully registered the cd(4) driver instance.

scsi_da.c:	Remove sysctl variable creation code from daregister(), and
		move it to move it to a new function, dasysctlinit().
		Queue dasysctlinit() to the taskqueue_thread taskqueue once
		we have fully registered the da(4) instance.

taskqueue.h:	Declare the new taskqueue_thread taskqueue, update some
		comments.

subr_taskqueue.c:
		Create the new kernel thread taskqueue.  This taskqueue
		runs outside of Giant, so any functions queued to it would
		need to explicitly acquire/release Giant if they need it.

cd.4:		Update the cd(4) man page to talk about the minimum command
		size sysctl/loader tunable.  Also note that the changer
		variables are available as loader tunables as well.

da.4:		Update the da(4) man page to cover the retry_count,
		default_timeout and minimum_cmd_size sysctl variables/loader
		tunables.  Remove references to /dev/r???, they aren't used
		any longer.

cd.9:		Update the cd(9) man page to describe the CD_Q_10_BYTE_ONLY
		quirk.

taskqueue.9:	Update the taskqueue(9) man page to describe the new thread
		task queue, and the taskqueue_swi_giant queue.

MFC after:	3 days
2003-09-03 04:46:28 +00:00
Nate Lawson
486d7256a3 Remove quirk for Apacer Handydrive. Kevin Oberman <oberman@es.net> reports
that it works without the quirk.  This and any other quirk changes will be
MFCd after the release unless they fix a known problem.

MFC after:	1 month
2003-08-25 18:48:45 +00:00
Nate Lawson
b4ea9fb547 Sort quirks into sections. 2003-08-25 18:14:43 +00:00
Nate Lawson
72c5c840ff Add the DA_Q_NO_PREVENT quirk which keeps da(4) from sending PREVENT/ALLOW
commands.  Add a quirk for the Creative Nomad MuVo USB device that uses
it as well as NO_SYNCHRONIZE_CACHE.

PR:		kern/53094
Submitted by:	Richard Nyberg <rnyberg@it.su.se>
MFC after:	3 days
2003-08-22 16:35:53 +00:00
Nate Lawson
6c3bdd6dee Quirk for Jungsoft NEXDISK USB flash key. Fails to mount without
NO_SYNCHRONIZE_CACHE.

PR:		kern/54737
Submitted by:	David Thiel <lx@redundancy.redundancy.org>
MFC after:	3 days
2003-08-22 05:58:23 +00:00
Nate Lawson
e1dca0e939 Add quirks for the EXATELECOM i-Bead mp3 player.
PR:		kern/51675
Submitted by:	Nicolas Jombart <ecu@ipv42.net>
MFC after:	3 days
2003-08-22 05:43:30 +00:00
Nate Lawson
370f5d5b0f Remove all USB quirks that only specify DA_Q_NO_6_BYTE. They are no longer
needed.  Other USB quirks remain in hopes that user testing will reveal
which ones are also no longer needed.

Courtesy of:	USENIX lunch break
2003-08-06 17:30:03 +00:00
Nate Lawson
a70515e217 Remove unused cmd6workaround() calls.
MFC after:	1 day
2003-08-06 14:24:16 +00:00
Nate Lawson
dda5f182ae Fix the new DA_OLD_QUIRKS option for normal and module compiles.
Pointed out by: 	bde
2003-07-29 18:08:16 +00:00
Nate Lawson
af991a6d16 Deprecate USB and Firewire quirks. We should now never send 6 byte commands
to such devices.  If a device fails due to this commit, add:
   options DA_OLD_QUIRKS
to the kernel config and recompile.  Then send the output of "camcontrol
inquiry da0" to scsi@freebsd.org so the quirk can be re-enabled.
2003-07-29 04:32:33 +00:00
Nate Lawson
1deac58179 Add a PATH_INQ flag, PIM_NO_6_BYTE, which indicates the SIM never wishes to
receive 6 byte commands.  Add a check for this flag to da(4) and cd(4) so
that they honor it.  This is a quick workaround for many devices (especially
USB) that require da(4) quirks to operate.  The more complete approach is
to finish the new transport code which will be aware of the SCSI version a
transport implements.

MFC after:	1 day
2003-07-28 06:15:59 +00:00
Thomas Quinot
95f4c5d29d Reference PR for IntelligentStick quirk entry.
PR:		kern/53005
2003-07-18 16:26:36 +00:00
Thomas Quinot
c679659e75 Add quirk entry for IntelligentStick disc-on-key USB devices.
Reported by Samuel Tardieu <sam@rfc1149.net>.

Reviewed by:	roberto
MFC after:	1 week
2003-07-17 15:33:08 +00:00
Nate Lawson
2813692cc2 Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

Looked over by:	scottl
2003-06-14 22:17:41 +00:00
Nate Lawson
141bdcc15a Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

PR:
Submitted by:
Looked over by:	scottl
Approved by:
Obtained from:
MFC after:
2003-06-14 22:17:38 +00:00
David E. O'Brien
ee709e7024 Use __FBSDID(). 2003-06-10 18:14:05 +00:00
David E. O'Brien
9c963d873e Use __FBSDID(). 2003-06-10 17:50:20 +00:00
Matt Jacob
e404e36b27 Check in some months long pending minor debug output changes.
Clarify that the implicit fallthrough was *not* intentional (thanks, Poul!)
and reorganize the code so a correct fallthrough (with /* FALLTHROUGH */)
occurs.
2003-06-02 00:37:42 +00:00
Poul-Henning Kamp
878d4f3dda Remove unused variables.
Remove break after return.
Add XXX comment where intent is unclear.

Found by:       FlexeLint
2003-06-01 09:12:24 +00:00
Poul-Henning Kamp
058675037b Add /* FALLTHROUGH */
Found by:	FlexeLint
2003-06-01 09:01:02 +00:00
Poul-Henning Kamp
07c6eac9d7 Add /* FALLTHROUGH */
Move /* FALLTHROUGH */ to correct location.
Remove unused variable(s).

Found by:       FlexeLint
2003-05-31 20:46:21 +00:00
Poul-Henning Kamp
82dcf708f8 Add /* FALLTHROUGH */
Remove unused variable(s).
Order switch in canonical order.

Found by:       FlexeLint
2003-05-31 20:44:32 +00:00
Poul-Henning Kamp
7379c88f4f Add /* FALLTHROUGH */
Found by:       FlexeLint
2003-05-31 18:20:26 +00:00
Poul-Henning Kamp
56824e138d Use symbolic constants instead of "4".
Use arrays instead of relying on struct packing.

Identical md5(scsi_ch.o).
2003-05-31 16:54:37 +00:00
Poul-Henning Kamp
7021f3f539 Don't use return(foo(...)); in a function returning void.
Found by:       FlexeLint
2003-05-31 16:36:42 +00:00
Nate Lawson
f410510b09 Add a quirk for OTi USB flash key.
PR:		kern/51825
Approved by:	re (rwatson)
2003-05-15 17:35:35 +00:00
Kenneth D. Merry
3674802f42 Fix three problems in large (>2TB) device handling:
- Make sure we don't release the READ CAPACITY CCB twice
 - If we have a device that needs a 16 byte READ CAPACITY command, make
   sure we call xpt_schedule() so we can get a CCB.
 - Don't unlock the peripheral until we're fully probed.

Many thanks to Julian Elischer for providing hardware and testing this.

Tested by:	julian
2003-05-03 00:21:40 +00:00
Kenneth D. Merry
512563b060 Fix compile errors on ia64 in dagetcapacity. Set block_len and maxsector
to 0 initially.  It seems that the ia64 backend isn't as "smart" as the
i386 backend, which realized that those variables were only set or used
when error == 0, and thus were not used uninitialized.
2003-05-01 05:16:13 +00:00
Poul-Henning Kamp
2c50682195 Use %j instead of %q in printf to unbreak sparc64. 2003-04-30 13:36:51 +00:00
Kenneth D. Merry
260cc4834d Add support to CAM for devices with more than 2^32 blocks. (2TB if you're
using 512 byte blocks).

cam_ccb.h:	Bump up volume_size and cylinders in ccb_calc_geometry to
		64 bits and 32 bits respectively, so we can hold larger
		device sizes.  cylinders would overflow at about 500GB.
		Bump CAM_VERSION for this change.  Note that this will
		require a recompile of all applications that talk to the
		pass(4) driver.

scsi_all.c:	Add descriptions for READ/WRITE(16), update READ/WRITE(12)
		descriptions, add descriptions for SERVICE ACTION IN/OUT.
		Add a new function, scsi_read_capacity_16(), that issues
		the read capacity service action.  (Necessary for arrays
		larger than 2^32 sectors.)  Update scsi_read_write() to use
		a 64 bit LBA and issue READ(16) or WRITE(16) if necessary.
		NOTE the API change.  This should be largely transparnet
		to most userland applications at compile time, but will
		break binary compatibility.  The CAM_VERSION bump, above,
		also serves the purpose of forcing a recompile for any
		applications that talk to CAM.

scsi_all.h:	Add 16 byte READ/WRITE structures, structures for 16 byte
		READ CAPACITY/SERVICE ACTION IN.  Add scsi_u64to8b() and
		scsi_8btou64.

scsi_da.c:	The da(4) driver probe now has two stages for devices
		larger than 2TB.  If a standard READ CAPACITY(10) returns
		0xffffffff, we issue the 16 byte version of read capacity
		to determine the true array capacity.  We also do the same
		thing in daopen() -- use the 16 byte read capacity if the
		device is large enough.

		The sysctl/loader code has also been updated to accept
		16 bytes as a minimum command size.
2003-04-30 00:35:22 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Nate Lawson
edae7ea680 SCSI Quirks for:
Casio QV-R3 USB camera, which appears to use a Pentax chipset
    M-Systems DiskOnKey USB flash key
    Feiya "slider" dual-slot flash reader
    SmartDisk (Mitsumi) USB floppy drive

PR:		kern/46545, kern/47793, kern/50020, kern/50226
2003-04-27 20:47:06 +00:00
Poul-Henning Kamp
2b69c2d76a Remove the unused ioctl routine. 2003-04-12 08:44:54 +00:00
Alan Cox
270086ec64 Sufficient access checks are performed by vmapbuf() that calling useracc()
is pointless.  Remove the calls to useracc().
2003-04-06 22:21:03 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Kenneth D. Merry
461dddba27 Clean up dynamically allocated sysctl variables when we run dacleanup() and
cdcleanup().  This fixes sysctl problems ("can't re-use a leaf") when
someone adds another peripheral at the same unit number.  (e.g. rescan da0,
it goes away, then rescan again and da0 comes back, but since we haven't
cleaned up the sysctl variables from the last da0 instance, we can't
register the variables for the new instance under the same name.)

Reported by:	njl
Tested by:	njl
2003-03-26 04:38:39 +00:00
Poul-Henning Kamp
7194d335cf Run a revision of the devstat interface:
Kernel:

Change statistics to use the *uptime() timescale (ie: relative to
boottime) rather than the UTC aligned timescale.  This makes the
device statistics code oblivious to clock steps.

Change timestamps to bintime format, they are cheaper.

Remove the "busy_count", and replace it with two counter fields:
"start_count" and "end_count", which are updated in the down and
up paths respectively.  This removes the locking constraint on
devstat.

Add a timestamp argument to devstat_start_transaction(), this will
normally be a timestamp set by the *_bio() function in bp->bio_t0.
Use this field to calculate duration of I/O operations.

Add two timestamp arguments to devstat_end_transaction(), one is
the current time, a NULL pointer means "take timestamp yourself",
the other is the timestamp of when this transaction started (see
above).

Change calculation of busy_time to operate on "the salami principle":
Only when we are idle, which we can determine by the start+end
counts being identical, do we update the "busy_from" field in the
down path.  In the up path we accumulate the timeslice in busy_time
and update busy_from.

Change the byte_* and num_* fields into two arrays: bytes[] and
operations[].

Userland:

Change the misleading "busy_time" name to be called "snap_time" and
make the time long double since that is what most users need anyway,
fill it using clock_gettime(CLOCK_MONOTONIC) to put it on the same
timescale as the kernel fields.

Change devstat_compute_etime() to operate on struct bintime.

Remove the version 2 legacy interface: the change to bintime makes
compatibility far too expensive.

Fix a bug in systat's "vm" page where boot relative busy times would
be bogus.

Bump __FreeBSD_version to 500107

Review & Collaboration by:	ken
2003-03-15 21:59:06 +00:00
Poul-Henning Kamp
0be3115328 Don't use the devstat->busy_count for state decisions in the device
drivers.  Doing so imposes atomicity and locking constraints on the
devstat API.

By:	ken
2003-03-15 11:00:56 +00:00
Poul-Henning Kamp
1ecc485c1b Call devstat_start_transaction_bio() instead of devstat_start_transaction() 2003-03-15 10:50:44 +00:00
Nate Lawson
bdc321a648 Quirk for SanDisk ImageMate II compact flash reader
PR:		kern/47877
Submitted by:	Mike Durian <durian@boogie.com>
MFC after:	3 days
2003-03-11 02:07:17 +00:00
Nate Lawson
2a7e0bee37 Quirk for Pentax Optio 230 USB camera. Note that other products probably
use the underlying AsahiOptical USB chip and thus this quirk may need to
be generalized in the future.

PR:		kern/46369
Submitted by:	Tim Vanderhoek <vanderh@ecf.utoronto.ca>
MFC After:	3 days
2003-03-11 01:55:11 +00:00
Poul-Henning Kamp
a9d2245ea8 Allocate the devstat structure with devstat_new_entry(). 2003-03-08 21:44:46 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
e4d0d8c84a msg 2003-02-26 20:53:28 +00:00
Poul-Henning Kamp
f64bbf8b61 NO_GEOM cleanup:
Move to "struct disk *" centric api.
2003-02-25 22:06:21 +00:00
Poul-Henning Kamp
2c6b49f6af NO_GEOM cleanup:
Retire the "d_dump_t" and use the "dumper_t" type instead.

Dumper_t takes a void * as first arg which is more general than the
dev_t taken by d_dump_t.  (Remember: we could have net-dumpers if
somebody wrote us one!)

Define the convention for GEOM controlled disk devices to be that the
first argument to the dumper function is the struct disk pointer.

Change device drivers accordingly.
2003-02-21 19:00:48 +00:00
Poul-Henning Kamp
b82ff75854 NO_GEOM cleanup:
Change the argument to disk_destroy() to be the same struct disk * as
disk_create() takes.

This enables drivers to ignore the (now) bogus dev_t which disk_create()
returns.
2003-02-21 15:13:26 +00:00
Kenneth D. Merry
56eac725a3 Fix ATAPI/USB/Firewire CDROM drive handling in cd(4) and hopefully fix
a number of related problems along the way.

 - Automatically detect CDROM drives that can't handle 6 byte mode
   sense and mode select, and adjust our command size accordingly.
   We have to handle this in the cd(4) driver (where the buffers are
   allocated), since the parameter list length is different for the
   6 and 10 byte mode sense commands.

 - Remove MODE_SENSE and MODE_SELECT translation removed in ATAPICAM
   and in the umass(4) driver, since there's no way for that to work
   properly.

 - Add a quirk entry for CDROM drives that just hang when they get a 6
   byte mode sense or mode select.  The reason for the quirk must be
   documented in a PR, and all quirks must be approved by
   ken@FreeBSD.org.  This is to make sure that we fully understand why
   each quirk is needed.  Once the CAM_NEW_TRAN_CODE is finished, we
   should be able to remove any such quirks, since we'll know what
   protocol the drive speaks (SCSI, ATAPI, etc.) and therefore whether
   we should use 6 or 10 byte mode sense/select commands.

 - Change the way the da(4) handles the no_6_byte sysctl.  There is
   now a per-drive sysctl to set the minimum command size for that
   particular disk.  (Since you could have multiple disks with
   multiple requirements in one system.)

 - Loader tunable support for all the sysctls in the da(4) and cd(4)
   drivers.

 - Add a CDIOCCLOSE ioctl for cd(4) (bde pointed this out a long
   time ago).

 - Add a media validation routine (cdcheckmedia()) to the cd(4)
   driver, to fix some problems bde pointed out a long time ago.  We
   now allow open() to succeed no matter what, but if we don't detect
   valid media, the user can only issue CDIOCCLOSE or CDIOCEJECT
   ioctls.

 - The media validation routine also reads the table of contents off
   the drive.  We use the table of contents to implement the
   CDIOCPLAYTRACKS ioctl using the PLAY AUDIO MSF command.  The
   PLAY AUDIO TRACK INDEX command that we previously used was
   deprecated after SCSI-2.  It works in every SCSI CDROM I've tried,
   but doesn't seem to work on ATAPI CDROM drives.  We still use the
   play audio track index command if we don't have a valid TOC, but
   I suppose it'll fail anyway in that case.

 - Add _len() versions of scsi_mode_sense() and scsi_mode_select() so
   that we can specify the minimum command length.

 - Fix a couple of formatting problems in the sense printing code.

MFC after: 	4 weeks
2003-02-21 06:19:38 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Poul-Henning Kamp
2c71b5639f Announce our ability to do DFLTPHYS sized transfers. 2003-02-11 21:30:28 +00:00
Nate Lawson
4d8d31a7b4 Quirk for Lexar Media Jumpdrive
PR:		kern/47006
Tested by:	George Hartzell <hartzell@kestrel.alerce.com>
MFC after:	1 week
2003-02-09 21:49:45 +00:00
Poul-Henning Kamp
936cc4614b Rename bio_linkage to the more obvious bio_parent.
Add bio_t0 timestamp, and include <sys/time.h> where needed
2003-02-07 21:09:51 +00:00
Alfred Perlstein
8deebb0160 Consolidate MIN/MAX macros into one place (param.h).
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-02-02 13:17:30 +00:00
Poul-Henning Kamp
1686ac18f9 NO_GEOM cleanup: retire disk_invalidate() 2003-01-30 19:43:50 +00:00