Commit Graph

282 Commits

Author SHA1 Message Date
Kevin Lo
f1928b0cc9 Remove the volatile qualifier to apply to fxp_miibus_readreg(). 2007-05-30 03:46:04 +00:00
Remko Lodder
847f53100a Add support for the 82562GX chip within if_fxp.
PR:		110251
Submitted by:	Vyacheslav Vovk
Approved by:	imp (mentor)
MFC After:	3 days
2007-03-28 18:10:50 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
c2175ff5ca Change the remainder of the drivers for DMA'ing devices enabled in the
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).
2007-01-21 19:32:51 +00:00
Ruslan Ermilov
16f1e614d9 Grammar nit. 2006-12-01 13:07:52 +00:00
Gleb Smirnoff
df79d5278f - Instead of if_watchdog/if_timer interface use our own timer
that piggybacks on fxp_tick() callout.
2006-11-30 14:58:01 +00:00
Rink Springer
597d4fe47d Added yet another extra fxp(4) PCI ID.
PR:		kern/104896
Submitted by:	Yoshihiko Sarumaru <mistral@imasy.or.jp>
Reviewed by:	imp (mentor), jfv
Approved by:	imp (mentor)
MFC after:	3 days
2006-11-14 18:54:31 +00:00
Rink Springer
42a4336a90 Added PCI ID's for:
- 0x1065: Intel 82562ET/EZ/GT/GZ PRO/100 VE Ethernet [1], as found on
  Tyan GS14 barebones.
- 0x1094: Intel Pro/100 946GZ (ICH7) Network Connection [2], as found on
  Intel 946GZis motherboards.

[1] Submitted by:	myself
[2] Submitted by:	Mike Tancsa <mike@sentex.net>
Reviewed by:		imp (mentor), jfv
Approved by:		imp (mentor)
MFC after:		3 days
2006-11-06 12:19:43 +00:00
John-Mark Gurney
5aa0cdf46d fix fxp so that it will reset the link when you change the speed... This
will fix a problem where you boot w/ the default of autoselect, but then
set the speed to 100/full, the switch will keep the autoselect/100/full
negotiation...  This will continue to work till someone resets the switch
or unplugs the cable resulting in the switch failing to autoneg and falling
back to 100/half, causing a hard to track down duplex mismatch..

Submitted by:	nCircle Network Security, Inc.
MFC after:	1 week
2006-10-06 20:53:01 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Matteo Riondato
1fe5a490ab Whitespace fix
Pointed out by: Nate Lawson
2006-04-14 17:26:04 +00:00
Matteo Riondato
c943ffcc29 Add device ID for Intel Pro/100 VE Network Connection card
PR:		kern/95729
Submitted by:	Nicky Bulthuis
MFC after:	1 day
2006-04-14 07:49:52 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Warner Losh
2b6fb51f02 Check for 10BaseT media correctly. Before we were confusing
ifm_status and ifm_active.  IFM_10_T gets set in the ifm_active field,
not in the ifm_status field, as far as I can tell.

Note: this was to enable a workaround that's rarely enabled.  I don't know
how to corrupt my eeprom to test it, and would rather not know...
2006-01-04 23:00:01 +00:00
Maxime Henrion
52dfd9cdad Add the device ID of fxp(4) NICs found in Sony Vaio VGN-TX1XP laptops.
PR:		kern/90024
Submitted by:	Thomas Hurst <tom@hur.st>
MFC after:	3 days
2005-12-12 14:30:13 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Ruslan Ermilov
f5071cacb1 Catch up with IFP2ENADDR() type change (array -> pointer). 2005-11-11 12:17:31 +00:00
Gleb Smirnoff
f0796cd26c - Don't pollute opt_global.h with DEVICE_POLLING and introduce
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
  can be compiled as loadable modules.

Reviewed by:	bde
2005-10-05 10:09:17 +00:00
Gleb Smirnoff
4092996774 Big polling(4) cleanup.
o Axe poll in trap.

o Axe IFF_POLLING flag from if_flags.

o Rework revision 1.21 (Giant removal), in such a way that
  poll_mtx is not dropped during call to polling handler.
  This fixes problem with idle polling.

o Make registration and deregistration from polling in a
  functional way, insted of next tick/interrupt.

o Obsolete kern.polling.enable. Polling is turned on/off
  with ifconfig.

Detailed kern_poll.c changes:
  - Remove polling handler flags, introduced in 1.21. The are not
    needed now.
  - Forget and do not check if_flags, if_capenable and if_drv_flags.
  - Call all registered polling handlers unconditionally.
  - Do not drop poll_mtx, when entering polling handlers.
  - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
  - In netisr_poll() axe the block, where polling code asks drivers
    to unregister.
  - In netisr_poll() and ether_poll() do polling always, if any
    handlers are present.
  - In ether_poll_[de]register() remove a lot of error hiding code. Assert
    that arguments are correct, instead.
  - In ether_poll_[de]register() use standard return values in case of
    error or success.
  - Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
    poll_switch() goes through interface list and enabled/disables polling.
    A message that kern.polling.enable is deprecated is printed.

Detailed driver changes:
  - On attach driver announces IFCAP_POLLING in if_capabilities, but
    not in if_capenable.
  - On detach driver calls ether_poll_deregister() if polling is enabled.
  - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
    flag. If there is no, then unlocks and returns.
  - In ioctl handler driver checks for IFCAP_POLLING flag requested to
    be set or cleared. Driver first calls ether_poll_[de]register(), then
    obtains driver lock and [dis/en]ables interrupts.
  - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
    If present, then returns.This is important to protect from spurious
    interrupts.

Reviewed by:	ru, sam, jhb
2005-10-01 18:56:19 +00:00
Maxime Henrion
05bd8c224e Convert fxp(4) to use the new bus_alloc_resources() API, it simplifies
the resource allocation code significantly.
2005-09-27 09:01:11 +00:00
Marcel Moolenaar
3cf09dd123 Fix an unaligned I/O memory access in the event that a SCB times out.
The FXP_SCR_FLOWCONTROL registers is at offset 0x19, but 2 bytes wide.
It cannot be read as a word without causing a panic on architectures
that enforce strict alignment.

MFC after: 3 days
2005-09-21 04:36:40 +00:00
John Baldwin
9eda9d7ac5 Add callout_drain()'s to foo_detach() after calling foo_stop() to make sure
that if softclock is running on another CPU and is blocked on our driver
lock, we will wait until it has acquired the lock, seen that it was
cancelled, dropped the lock, and awakened us so that we can safely destroy
the mutex.

MFC after:	3 days
2005-08-17 17:44:32 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
John Baldwin
3212724cc0 - Use callout_init_mtx() to close a small race between callout_stop() and
the timeout routine.
- Fix locking in detach.
- Add locking in shutdown.
- Don't mess with the PCI command register in resume, the PCI bus driver
  already does this for us.
- Add locking to the non-serial ifmedia routines.
- Fix locking in ioctl.
- Remove spls and support for 4.x.

MFC after:	1 week
2005-08-08 21:03:54 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Maxime Henrion
86c8aacb07 Add a new PCI id for fxp(4) cards found on ICH7-based systems.
This commit is a RELENG_6 candidate.

Submitted by:	Martin Nilsson <martin@gneto.com>
2005-07-29 22:40:06 +00:00
Brooks Davis
7ba33d8222 Move if_alloc() up in fxp_attach() so there's an ifp before
mii_phy_probe() is called.

Committed via:	fxp0
2005-06-11 00:47:34 +00:00
Wes Peters
1026fbd360 Avoid deadlock in fxp driver when system runs out of mbufs.
MFC after:	1 week
Provided by:	Ernie Smallis <esmallis@stbernard.com>
2005-06-10 23:54:52 +00:00
Brooks Davis
1b5a39d368 Revert the unnecessicary addition of some braces in fxp_attach(). Don't
explicitly free the ifp in fxp_detach(), the call to fxp_release() takes
care of it.
2005-06-10 20:42:02 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
67ba65663f Correct comment 2005-06-06 03:22:51 +00:00
Brooks Davis
e904a5aa62 Remove some variables the last commit stopped using so the code compiles. 2005-06-06 02:12:12 +00:00
Warner Losh
95af165d7f The PCI bus code saves/restores these config registers now. 2005-06-05 22:50:55 +00:00
Maxime Henrion
507feeafad Be more conservative when enabling extended features. There are fxp(4)
NICs out there that have an utterly bogus revision ID.

Reported by:	Denis Shaposhnikov <dsh@vlink.ru>
2005-04-22 13:05:53 +00:00
Maxime Henrion
de57160389 Add a microcode to implement receive bundling for 82551 chipsets with
a revision ID of 0x0f (D102 E-step).

MFC after:	2 weeks
Tested by:	pav
2005-04-21 19:34:57 +00:00
Maxime Henrion
647ec60cc7 Enable extended RFDs and TCBs, and thus checksum offloading, for
latest 82550 and 82551 chipsets (revision IDs 0x0e, 0x0f and 0x10).
We were only enabling it for revisions 0x0c and 0x0d, now it's
enabled for any 8255x NIC with a revision ID bigger than 0x0c.  It
should be safe, and this is what Intel does in their open source
driver.

MFC after:	2 weeks
Tested by:	Pavel Lobach lobach_pavel at mail dot ru
2005-04-21 13:27:38 +00:00
Maxime Henrion
c4bf1e9092 Unload and destroy the TX DMA maps before destroying the DMA tag
they're attached to, not after.

Spotted by:	Coverity via sam
2005-03-16 16:39:04 +00:00
Maxime Henrion
40c20505a8 - Encapsulate the code responsible for initializing a new TX descriptor
from an mbuf into the fxp_encap() function, as done in other drivers.
- Don't waste time calling bus_dmamap_load_mbuf() if we know the mbuf
  chain is too long to fit in a TX descriptor, call m_defrag() first.
- Convert fxp(4) to use bus_dmamap_load_mbuf_sg().
2005-03-07 13:20:49 +00:00
Maxime Henrion
74d1ed239b Cleanup: u_intXX_t -> uintX_t conversion. 2005-03-06 05:07:26 +00:00
Warner Losh
538565c4a5 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:30:12 +00:00
Maxime Henrion
29a8929dfa Add support for fxp(4) cards found in Sony FS570 laptops.
Submitted by:	Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
2005-03-05 13:52:28 +00:00
Maxime Henrion
6720ebcc9f Fix the panic recently reported on -current@ occuring when configuring
a vlan interface attached to a fxp(4) card when it has not been
initialized yet.  We now set the links from our internel TX descriptor
structure to the TX command blocks at attach time rather than at init
time.  While I'm here, slightly improve the style in fxp_attach().

PR:		kern/78112
Reported by:	Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> and others
Tested by:	flz, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
MFC after:	1 week
2005-03-03 00:22:59 +00:00
Maxime Henrion
93b6e2e6ff Fix a stupid bogon from myself, sc->revision wasn't initialized when
testing it to know whether we should enable the 82503 serial mode...
Move code to the right location and disallow the use of the 82503
serial mode if the sc->revision field is 0 again.  This makes fxp(4)
work correctly with ATMEL 350 93C46 cards (3 port 82559 based with a
82555 PHY), as well as with the older ATMEL 220 93C46 (same flavour)
and with the even older 10Mbps-only 82557 cards with the 82503 serial
interface.

Tested by:	Andre Albsmeier <andrer@albsmeier.net>, krion
MFC after:	2 weeks
2005-02-27 15:12:50 +00:00
Ruslan Ermilov
7b6fe3a4c2 Remove an outdated comment about ifnet not being locked.
OK'ed by:	njl, rwatson, sam
2005-02-15 17:47:57 +00:00
Robert Watson
03edfff39a Disable ethernet flow control in if_fxp by default, in order to prevent
unexpected surprises when a system panics or is left in the debugger.

Requested by:	kris
MFC after:	3 days
2005-01-29 23:13:20 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Maxime Henrion
778ee7be10 Allow fxp(4) cards with a revision id of 0 to use the 82503 serial
interface as well.  This is not an expected revision id per the
datasheet, but unfortunately there are such cards out there with
a 82557 chipset, and they want to use the 82503.

PR:		kern/75739
Reported by:	Andre Albsmeier <andre.albsmeier@siemens.com>
2005-01-04 19:30:14 +00:00
Maxime Henrion
4ed53076ed Only try to use the 82503 serial interface for the 82557 chipsets. The
datasheet says it is only valid for such chipsets and shouldn't be used
with others.  This fixes some 82559 based cards which otherwise only
work at 10Mbit.

MFC after:	5 days
Tested by:	krion
2004-12-20 10:18:21 +00:00
Pyun YongHyeon
94a4f968c1 Make interrupt coalescing work on big endian systems.
Also change struct ucode.length to be in number of elements (u_int32_t)
to help endian handling.

MFC after:	2 weeks
2004-11-17 04:25:10 +00:00
Maxime Henrion
048ca166ff Add support for the fxp(4) based card in ICH6 (i915) chipsets.
This is a RELENG_5 candidate.

Submitted by:	Mike Tancsa <mike@sentex.net>
2004-09-18 19:13:13 +00:00