Commit Graph

229 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
d68fae5849 Add "camcontrol reprobe" subcommand, and implement it for da(4).
This makes it possible to manually force updating capacity data
after the disk got resized. Without it it might be neccessary to
reboot before FreeBSD notices updated disk size under eg VMWare.

Discussed with:	imp@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6108
2016-05-10 15:46:33 +00:00
Pedro F. Giffuni
b68ac8007d sbin: minor spelling fixes.
No functional change.
2016-04-30 19:04:59 +00:00
Enji Cooper
dc8a83a5b6 Remove logically impossible test in scsidoinquiry(..)
It was already done 4 lines prior and the value of error didn't change

MFC after: 3 days
Reported by: Coverity
CID: 1011236
Sponsored by: EMC / Isilon Storage Division
2016-04-28 21:17:23 +00:00
Marcelo Araujo
286d197142 Use nitems() from sys/param.h.
MFC after:	2 weeks.
2016-04-19 11:12:57 +00:00
Glen Barber
406d87b1c3 Explicitly add more files to the 'runtime' package.
Sponsored by:	The FreeBSD Foundation
2016-02-09 20:19:31 +00:00
Enji Cooper
ea36ade1d1 Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

MFC after: 1 week
X-MFC with: r289915
PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
2015-10-25 04:37:00 +00:00
Kenneth D. Merry
0e358df062 Revamp camcontrol(8) fwdownload support and add the opcodes subcommand.
The significant changes and bugs fixed here are:

1. Fixed a bug in the progress display code:

   When the user's filename is too big, or his terminal width is too
   small, the progress code could wind up using a negative number for
   the length of the "stars" that it uses to indicate progress.

   This negative value was assigned to an unsigned variable, resulting
   in a very large positive value.

   The result is that we wound up writing garbage from memory to the
   user's terminal.

   With an 80 column terminal, a file name length of more than 35
   characters would generate this problem.

   To address this, we now set a minimum progress bar length, and
   truncate the user's file name as needed.

   This has been tested with large filenames and small terminals, and
   at least produces reasonable results.  If the terminal is too
   narrow, the progress display takes up an additional line with each
   update, but this is more user friendly than writing garbage to the
   tty.

2. SATA drives connected via a SATA controller didn't have SCSI Inquiry
   data populated in struct cam_device.  This meant that the code in
   fw_get_vendor() in fwdownload.c would try to match a zero-length
   vendor ID, and so return the first entry in the vendor table.  (Which
   used to be HITACHI.)  Fixed by grabbing identify data, passing the
   identify buffer into fw_get_vendor(), and matching against the model
   name.

3. SATA drives connected via a SAS controller do have Inquiry data
   populated.  The table included a couple of entries -- "ATA ST" and
   "ATA HDS", intended to handle Seagate and Hitachi SATA drives attached
   via a SAS controller.  SCSI to ATA translation layers use a vendor
   ID of "ATA" (which is standard), and then the model name from the ATA
   identify data as the SCSI product name when they are returning data on
   SATA disks.  The cam_strmatch code will match the first part of the
   string (because the length it is given is the length of the vendor,
   "ATA"), and return 0 (i.e. a match).  So all SATA drives attached to
   a SAS controller would be programmed using the Seagate method
   (WRITE BUFFER mode 7) of SCSI firmware downloading.

4. Issue #2 above covered up a bug in fw_download_img() -- if the
   maximum packet size in the vendor table was 0, it tried to default
   to a packet size of 32K.  But then it didn't actually succeed in
   doing that, because it set the packet size to the value that was
   in the vendor table (0).  Now that we actually have ATA attached
   drives fall use the VENDOR_ATA case, we need a reasonable default
   packet size.  So this is fixed to properly set the default packet size.

5. Add support for downloading firmware to IBM LTO drives, and add a
   firmware file validation method to make sure that the firmware
   file matches the drive type.  IBM tape drives include a Load ID and
   RU name in their vendor-specific VPD page 0x3.  Those should match
   the IDs in the header of the firmware file to insure that the
   proper firmware file is loaded.

6. This also adds a new -q option to the camcontrol fwdownload
   subcommand to suppress informational output.  When -q is used in
   combination with -y, the firmware upgrade will happen without
   prompting and without output except if an error condition occurs.

7. Re-add support for printing out SCSI inquiry information when
   asking the user to confirm that they want to download firmware, and
   add printing of ATA Identify data if it is a SATA disk.  This was
   removed in r237281 when support for flashing ATA disks was added.

8. Add a new camcontrol(8) "opcodes" subcommand, and use the
   underlying code to get recommended timeout values for drive
   firmware downloads.

   Many SCSI devices support the REPORT SUPPORTED OPERATION CODES
   command, and some support the optional timeout descriptor that
   specifies nominal and recommended timeouts for the commands
   supported by the device.

   The new camcontrol opcodes subcommand allows displaying all
   opcodes supported by a drive, information about which fields
   in a SCSI CDB are actually used by a given SCSI device, and the
   nominal and recommended timeout values for each command.

   Since firmware downloads can take a long time in some devices, and
   the time varies greatly between different types of devices, take
   advantage of the infrastructure used by the camcontrol opcodes
   subcommand to determine the best timeout to use for the WRITE
   BUFFER command in SCSI device firmware downloads.

   If the device recommends a timeout, it is likely to be more
   accurate than the default 50 second timeout used by the firmware
   download code.  If the user specifies a timeout, it will override
   the default or device recommended timeout.  If the device doesn't
   support timeout descriptors, we fall back to the default.

9. Instead of downloading firmware to SATA drives behind a SAS controller
   using WRITE BUFFER, use the SCSI ATA PASS-THROUGH command to compose
   an ATA DOWNLOAD MICROCODE command and it to the drive.  The previous
   version of this code attempted to send a SCSI WRITE BUFFER command to
   SATA drives behind a SAS controller.  Although that is part of the
   SAT-3 spec, it doesn't work with the parameters used with LSI
   controllers at least.

10.Add a new mechanism for making common ATA passthrough and
   ATA-behind-SCSI passthrough commands.

   The existing camcontrol(8) ATA command mechanism checks the device
   type on every command executed.  That works fine for individual
   commands, but is cumbersome for things like a firmware download
   that send a number of commands.

   The fwdownload code detects the device type up front, and then
   sends the appropriate commands.

11.In simulation mode (-s), if the user specifies the -v flag, print out
   the SCSI CDB or ATA registers that would be sent to the drive.  This will
   aid in debugging any firmware download issues.

sbin/camcontrol/fwdownload.c:
	Add a device type to the fw_vendor structure, so that we can
	specify different download methods for different devices from the
	same vendor.  In this case, IBM hard drives (from when they
	still made hard drives) and tape drives.

	Add a tur_status field to the fw_vendor structure so that we can
	specify whether the drive to be upgraded should be ready, not
	ready, or whether it doesn't matter.  Add the corresponding
	capability in fw_download_img().

	Add comments describing each of the vendor table fields.

	Add HGST and SmrtStor to the supported SCSI vendors list.

	In fw_get_vendor(), look at ATA identify data if we have a SATA
	device to try to identify what the drive vendor is.

	Add IBM firmware file validation.  This gets VPD page 0x3, and
	compares the Load ID and RU name in the page to the values
	included in the header.  The validation code will refuse to load
	a firmware file if the values don't match.  This does allow the
	user to attempt a downgrade; whether or not it succeeds will
	likely depend on the drive settings.

	Add a -q option, and disable all informative output
	(progress bars, etc.) when this is enabled.

	Re-add the inquiry in the confirmation dialog so the user has
	a better idea of which device he is talking to.  Add support for
	displaying ATA identify data.

	Don't automatically disable confirmation in simulation (-s) mode.
	This allows the user to see the inquiry or identify data in the
	dialog, and see exactly what they would see when the command
	actually runs.  Also, in simulation mode, if the user specifies
	the -v flag, print out the SCSI CDB or ATA registers that would
	be sent to the drive.  This will aid in debugging any firmware
	download issues.

	Add a timeout field and timeout type to the firmware download
	vendor table.  This allows specifying a default timeout and allows
	specifying whether we should attempt to probe for a recommended
	timeout from the drive.

	Add a new fuction, fw_get_timeout(), that will determine
	which timeout to use for the WRITE BUFFER command.  If the
	user specifies a timeout, we always use that.  Otherwise,
	we will use the drive recommended timeout, if available,
	and fall back to the default when a drive recommended
	timeout isn't available.

	When we prompt the user, tell him what timeout we're going
	to use, and the source of the timeout.

	Revamp the way SATA devices are handled.

	In fwdownload(), use the new get_device_type() function to
	determine what kind of device we're talking to.

	Allow firmware downloads to any SATA device, but restrict
	SCSI downloads to known devices.  (The latter is not a
	change in behavior.)

	Break out the "ready" check from fw_download_img() into a
	new subfunction, fw_check_device_ready().  This sends the
	appropriate command to the device in question -- a TEST
	UNIT READY or an IDENTIFY.  The IDENTIFY for SATA devices
 	a SAT layer is done using the SCSI ATA PASS-THROUGH
	command.

	Use the new build_ata_cmd() function to build either a SCSI or
	ATA I/O CCB to issue the DOWNLOAD MICROCODE command to SATA
	devices.  build_ata_cmd() figures looks at the devtype argument
	and fills in the correct CCB type and CDB or ATA registers.

	Revamp the vendor table to remove the previous
	vendor-specific ATA entries and use a generic ATA vendor
	placeholder.  We currently use the same method for all ATA
	drives, although we may have to add vendor-specific
	behavior once we test this with more drives.

sbin/camcontrol/progress.c:
	In progress_draw(), make barlength a signed value so that
	we can easily detect a negative value.

	If barlength (the length of the progress bar) would wind up
	negative due to a small TTY width or a large filename,
	set the bar length to the new minimum (10 stars) and
	truncate the user's filename.  We will truncate it down to
	0 characters if necessary.

	Calculate a new prefix_len variable (user's filename length)
	and use it as the precision when printing the filename.

sbin/camcontrol/camcontrol.c:
	Implement a new camcontrol(8) subcommand, "opcodes".  The
	opcodes subcommand allows displaying the entire list of
	SCSI commands supported by a device, or details on an
	individual command.  In either case, it can display
	nominal and recommended timeout values.

	Add the scsiopcodes() function, which calls the new
	scsigetopcodes() function to fetch opcode data from a
	drive.

	Add two new functions, scsiprintoneopcode() and
	scsiprintopcodes(), which print information about one
	opcode or all opcodes, respectively.

	Remove the get_disk_type() function.  It is no longer used.

	Add a new function, dev_has_vpd_page(), that fetches the
	supported INQUIRY VPD list from a device and tells the
	caller whether the requested VPD page is available.

	Add a new function, get_device_type(), that returns a more
	precise device type than the old get_disk_type() function.
	The get_disk_type() function only distinguished between
	SCSI and ATA devices, and SATA devices behind a SCSI to ATA
	translation layer were considered to be "SCSI".

	get_device_type() offers a third type, CC_DT_ATA_BEHIND_SCSI.
	We need to know this to know whether to attempt to send ATA
	passthrough commands.  If the device has the ATA
	Information VPD page (0x89), then it is an ATA device
	behind a SCSI to ATA translation layer.

	Remove the type argument from the fwdownload() subcommand.

	Add a new function, build_ata_cmd(), that will take one set
	of common arguments and build either a SCSI or ATA I/O CCB,
	depending on the device type passed in.

sbin/camcontrol/camcontrol.h:
	Add a prototype for scsigetopcodes().

	Add a new enumeration, camcontrol_devtype.

	Add prototypes for dev_has_vpd_page(), get_device_type()
	and build_ata_cmd().

	Remove the type argument from the fwdownload() subcommand.

sbin/camcontrol/camcontrol.8
	Explain that the fwdownload subcommand will use the drive
	recommended timeout if available, and that the user can
	override the timeout.

	Document the new opcodes subcommand.

	Explain that we will attempt to download firmware to any
	SATA device.

	Document supported SCSI vendors, and models tested if known.

	Explain the commands used to download firmware for the
	three different drive and controller combinations.

	Document that the -v flag in simulation mode for the fwdownload
	subcommand will print out the SCSI CDBs or ATA registers that would
	be used.

sys/cam/scsi/scsi_all.h:
	Add new bit definitions for the one opcode descriptor for
	the REPORT SUPPORTED OPCODES command.

	Add a function prototype for scsi_report_supported_opcodes().

sys/cam/scsi/scsi_all.c:
	Add a new CDB building function, scsi_report_supported_opcodes().

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-08-20 16:07:51 +00:00
Christian Brueffer
99d43aee11 Fix a few mandoc warnings.
MFC after:	1 week
2015-08-12 10:34:05 +00:00
Christian Brueffer
fa6e0e5334 Add -b to the devlist usage info, forgotten in r260059.
PR:		195094
Submitted by:	robin.hahling@gw-computing.net
MFC after:	1 week
2015-07-02 13:57:26 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Kenneth D. Merry
5672fac935 Add support for reading MAM attributes to camcontrol(8) and libcam(3).
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.

This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.

libsbuf/Makefile:
	Add subr_prf.c for the new sbuf_hexdump() function.  This
	function is essentially the same function.

libsbuf/Symbol.map:
	Add a new shared library minor version, and include the
	sbuf_hexdump() function.

libsbuf/Version.def:
	Add version 1.4 of the libsbuf library.

libutil/hexdump.3:
	Document sbuf_hexdump() alongside hexdump(3), since it is
	essentially the same function.

camcontrol/Makefile:
	Add attrib.c.

camcontrol/attrib.c:
	Implementation of READ ATTRIBUTE support for camcontrol(8).

camcontrol/camcontrol.8:
	Document the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.c:
	Add the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.h:
	Add a function prototype for scsiattrib().

share/man/man9/sbuf.9:
	Document the existence of sbuf_hexdump() and point users to
	the hexdump(3) man page for more details.

sys/cam/scsi/scsi_all.c:
	Add a table of known attributes, text descriptions and
	handler functions.

	Add a new scsi_attrib_sbuf() function along with a number
	of other related functions that help decode attributes.

	scsi_attrib_ascii_sbuf() decodes ASCII format attributes.

	scsi_attrib_int_sbuf() decodes binary format attributes, and
	will pass them off to scsi_attrib_hexdump_sbuf() if they're
	bigger than 8 bytes.

	scsi_attrib_vendser_sbuf() decodes the vendor and drive
	serial number attribute.

	scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
	Information attribute that LTFS writes out.

sys/cam/scsi/scsi_all.h:
	Add a number of attribute-related structure definitions and
	other defines.

	Add function prototypes for all of the functions added in
	scsi_all.c.

sys/kern/subr_prf.c:
	Add a new function, sbuf_hexdump().  This is the same as
	the existing hexdump(9) function, except that it puts the
	result in an sbuf.

	This also changes subr_prf.c so that it can be compiled in
	userland for includsion in libsbuf.

	We should work to change this so that the kernel hexdump
	implementation is a wrapper around sbuf_hexdump() with a
	statically allocated sbuf with a drain.  That will require
	a drain function that goes to the kernel printf() buffer
	that can take a non-NUL terminated string as input.
	That is because an sbuf isn't NUL-terminated until it is
	finished, and we don't want to finish it while we're still
	using it.

	We should also work to consolidate the userland hexdump and
	kernel hexdump implemenatations, which are currently
	separate.  This would also mean making applications that
	currently link in libutil link in libsbuf.

sys/sys/sbuf.h:
	Add the prototype for sbuf_hexdump(), and add another copy
	of the hexdump flag values if they aren't already defined.

	Ideally the flags should be defined in one place but the
	implemenation makes it difficult to do properly.  (See
	above.)

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2015-06-09 21:39:38 +00:00
Simon J. Gerraty
44d314f704 dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
Marcelo Araujo
1bfa92ba85 Remove unused variables reported by clang.
Differential Revision:	D2688
Reviewed by:		rodrigc, mav
2015-06-02 09:05:45 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Baptiste Daroussin
59d67bba3e Remove End Of Line whitespaces 2015-04-26 10:20:11 +00:00
Joel Dahl
952364486a Fix minor mdoc issues. 2015-04-24 14:36:06 +00:00
Alexander Motin
e7affda584 Add camcontrol subcommands to control APM and AAM levels.
MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2015-03-19 12:22:57 +00:00
Alexander Motin
c0a3ee8450 Make ATA power management commands to work on SCSI HBAs via PASS THROUGH.
MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2015-03-17 09:21:31 +00:00
Kenneth D. Merry
e8577fb489 Make sure that the flags for the XPT_DEV_ADVINFO CCB are initialized
properly.

If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.

sys/cam/cam_ccb.h:
	Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
	that callers can use to set the flags field when no store
	is desired.

sys/cam/scsi/scsi_enc_ses.c:
	In ses_setphyspath_callback(), explicitly set the
	XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
	physical path information.  Instead of ORing in the
	CDAI_FLAG_STORE flag when storing the physical path, set
	the flags field to CDAI_FLAG_STORE.

sys/cam/scsi/scsi_sa.c:
	Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
	fetching extended inquiry information.

sys/cam/scsi/scsi_da.c:
	When storing extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
	ORing it into a field that isn't initialized.

sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
	When fetching extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
	setting it to 0.

sbin/camcontrol/camcontrol.c:
	When fetching a device ID, set the XPT_DEV_ADVINFO flags
	field to CDAI_FLAG_NONE instead of 0.

sys/sys/param.h:
	Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
	CCB flag, CDAI_FLAG_NONE.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-02-18 18:30:19 +00:00
Kenneth D. Merry
a1736be349 Improve camcontrol(8) handling of drive defect data.
This includes a new summary mode (-s) for camcontrol defects that
quickly tells the user the most important thing: how many defects
are in the requested list.  The actual location of the defects is
less important.

Modern drives frequently have more than the 8191 defects that can
be reported by the READ DEFECT DATA (10) command.  If they don't
have that many grown defects, they certainly have more than 8191
defects in the primary (i.e. factory) defect list.

The READ DEFECT DATA (12) command allows for longer parameter
lists, as well as indexing into the list of defects, and so allows
reporting many more defects.

This has been tested with HGST drives and Seagate drives, but
does not fully work with Seagate drives.  Once I have a Seagate
spec I may be able to determine whether it is possible to make it
work with Seagate drives.

scsi_da.h:	Add a definition for the new long block defect
		format.

		Add bit and mask definitions for the new extended
		physical sector and bytes from index defect
		formats.

		Add a prototype for the new scsi_read_defects() CDB
		building function.

scsi_da.c:	Add a new scsi_read_defects() CDB building function.
		camcontrol(8) was previously composing CDBs manually.
		This is long overdue.

camcontrol.c:	Revamp the camcontrol defects subcommand.  We now
		go through multiple stages in trying to get defect
		data off the drive while avoiding various drive
		firmware quirks.

		We start off by requesting the defect header with
		the 10 byte command.  If we're in summary mode (-s)
		and the drive reports fewer defects than can be
		represented in the 10 byte header, we're done.
		Otherwise, we know that we need to issue the
		12 byte command if the drive reports the maximum
		number of defects.

		If we're in summary mode, we're done if we get a
		good response back when asking for the 12 byte header.

		If the user has asked for the full list, then we
		use the address descriptor index field in the 12
		byte CDB to step through the list in 64K chunks.
		64K is small enough to work with most any ancient
		or modern SCSI controller.

		Add support for printing the new long block defect
		format, as well as the extended physical sector and
		bytes from index formats.  I don't have any drives
		that support the new formats.

		Add a hexadecimal output format that can be turned
		on with -X.

		Add a quiet mode (-q) that can be turned on with
		the summary mode (-s) to just print out a number.

		Revamp the error detection and recovery code for
		the defects command to work with HGST drives.

		Call the new scsi_read_defects() CDB building
		function instead of rolling the CDB ourselves.

		Pay attention to the residual from the defect list
		request when printing it out, so we don't run off
		the end of the list.

		Use the new scsi_nv library routines to convert
		from strings to numbers and back.

camcontrol.8:	Document the new defect formats (longblock, extbfi,
		extphys) and command line options (-q, -s, -S and
		-X) for the defects subcommand.

		Explain a little more about what drives generally
		do and don't support.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-01-08 16:58:40 +00:00
Joel Dahl
f636caf195 mdoc: paragraph improvements. 2015-01-04 12:49:24 +00:00
Joel Dahl
f7e00d4bbd mdoc: remove EOL whitespace. 2014-12-29 13:50:59 +00:00
Baptiste Daroussin
13eb765f2d Convert sbin/ to LIBADD
Reduce overlinking
2014-11-25 11:23:12 +00:00
Simon J. Gerraty
9268022b74 Merge from head@274682 2014-11-19 01:07:58 +00:00
Bryan Venteicher
eccc99cb3e Attempt to report a better error if sanitize is not supported
MFC after:	1 month
2014-11-09 18:13:08 +00:00
Alexander Motin
959ec2581b Update CAM CCB accounting for the new status quo.
devq_openings counter lost its meaning after allocation queues has gone.
held counter is still meaningful, but problematic to update due to separate
locking of CCB allocation and queuing.

To fix that replace devq_openings counter with allocated counter.  held is
now calculated on request as difference between number of allocated, queued
and active CCBs.

MFC after:	1 month
2014-09-14 11:59:49 +00:00
Gavin Atkinson
91804910e2 Fix character case in examples for "camcontrol security" - should be
"-U user" not "-u user".

PR:		193179
Submitted by:	milios ccsys com
MFC after:	3 days
2014-08-31 10:28:31 +00:00
Simon J. Gerraty
ee7b0571c2 Merge head from 7/28 2014-08-19 06:50:54 +00:00
Kenneth D. Merry
08df2e3eaf Add persistent reservation support to camcontrol(8).
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.

sbin/camcontrol/Makefile:
	Add persist.c.

sbin/camcontrol/persist.c:
	New persistent reservation support for camcontrol(8).

	We have support for all known operation modes for PERSISTENT RESERVE
	IN and PERSISTENT RESERVE OUT.
	exceptions noted above.

sbin/camcontrol/camcontrol.8:
	Document the new 'persist' subcommand.

	In the section on the Transport ID (-I) option, explain what
	Transport IDs for each protocol should look like.  At some point
	some of this information could probably get moved off in a
	separate man page, either on Transport IDs alone or a man page
	documenting the Transport ID parsing code.

	Add a number of examples of persistent reservation commands.
	Persistent Reservations are complex enough that the average user
	probably won't be able to get the commands exactly right by just
	reading the man page.  These examples show a few basic and
	advanced examples of how to use persistent reservations.

sbin/camcontrol/camcontrol.h:
	Move the definition for camcontrol_optret here, so we can use it
	for the persistent reservation code.

	Add a definition for the new scsipersist() function.

sbin/camcontrol/camcontrol.c:
	Add 'persist' to the list of subcommands.

	Document 'persist' in the help text.

sys/cam/scsi/scsi_all.c:
	Add the scsi_persistent_reserve_in() and
	scsi_persistent_reserve_out() CCB building functions.

	Add a new function, scsi_transportid_sbuf().  This takes a
	SCSI Transport ID (documented in SPC-4), and prints it to
	an sbuf(9).  There are some transports (like ATA, USB, and
	SSA) for which there is no transport defined.  We need to
	come up with a reasonable thing to do if we're presented
	with a Transport ID that claims to be for one of those
	protocols.

	Add new routines scsi_get_nv() and scsi_nv_to_str().

	These functions do a table lookup to go between a string and an
	integer.  There are lots of table lookups needed in the
	persistent reservation code in camcontrol(8).

	Add a new function, scsi_parse_transportid(), along with leaf node
	functions to parse:
	FC, 1394 and SAS (scsi_parse_transportid_64bit())
	iSCSI (scsi_parse_transportid_iscsi())
	SPI (scsi_parse_transportid_spi())
	RDMA (scsi_parse_transportid_rdma())
	PCIe (scsi_parse_transportid_sop())

	Transport IDs.  Given a string with the general form proto,id these
	functions create a SCSI Transport ID structure.

sys/cam/scsi/scsi_all.h:
	Update the various persistent reservation data structures to
	SPC4r36l, but also rename some fields that were previously
	obsolete with the proper names from older SCSI specs.  This
	allows using older, obsolete persistent reservation types when
	desired.

	Add function prototypes for the new persistent reservation CCB
	building functions.

	Add a data strucure for the READ FULL STATUS service action
	of the PERSISTENT RESERVE IN command.

	Add Transport ID structures for all protocols described in SPC-4.

	Add a new series of SCSI_PROTO_XXX definitions, and
	redefine other defines in terms of these new definitions.

	Add a prototype for scsi_transportid_sbuf().

	Change a couple of "obsolete" persistent reservation data
	structure fields into something more meaningful, based on
	what the field was called when it was defined in the spec.
	(e.g. SPC, SPC-2, etc.)

	Create a new define, SPRI_MAX_LEN, for the maximum allocation
	length allowed for the PERSISTENT RESERVE IN command.

	Add data structures and enumerations for the new name/value
	translation functions.

	Add data structures for SCSI over PCIe Routing IDs.

	Bring the PERSISTENT RESERVE OUT Register and Move parameter list
	structure (struct scsi_per_res_out_parms) up to date with SPC-4.

	Add a data structure for the transport IDs that can optionally be
	appended to the basic PERSISTENT RESERVE OUT parameter list.

	Move SCSI protocol macro definitions out of the VPD page 0x83
	definition and combine them with the more up to date protocol
	definitions higher in the file.

	Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
	scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
	scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
	scsi_parse_transportid_sop(), and scsi_parse_transportid().

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2014-07-03 23:09:44 +00:00
Baptiste Daroussin
bd0891ceb3 use .Mt to mark up email addresses consistently (part1)
PR:		191174
Submitted by:	Franco Fichtner  <franco@lastsummer.de>
2014-06-20 09:40:43 +00:00
Simon J. Gerraty
fae50821ae Updated dependencies 2014-05-16 14:09:51 +00:00
Simon J. Gerraty
76b28ad6ab Updated dependencies 2014-05-10 05:16:28 +00:00
Simon J. Gerraty
3b8f084595 Merge head 2014-04-28 07:50:45 +00:00
Steven Hartland
9acc9dc691 Add information about supported NCQ functionality to camcontrol identify.
MFC after:	2 weeks
2014-04-24 02:16:23 +00:00
Alexander Motin
431d3a5bfc Replace several instances of -1 with appropriate CAM_*_WILDCARD and types.
It was equal before r259397, but for good or bad, not any more for LUNs.

This change fixes at least CAM debugging.
2014-01-10 12:18:05 +00:00
Scott Long
9ccde11826 getopt returns an int, not a char, so use the correct data type for
the return value. Fixes powerpc tinderbox.

MFC after:	2 days
2013-12-30 16:49:31 +00:00
Scott Long
56dc4e726b Add the '-b' flag to 'camcontrol devlist'. This prints only the existing
buses and their parent sims, useful for creating a sim->bus->device map.

Obtained from:	Netflix
MFC after:	3 days
2013-12-29 20:48:47 +00:00
Nathan Whitehorn
abe8350519 printf() specifier updates to CAM to handle either 32-bit or 64-bit lun_id_t.
MFC after:	2 weeks
2013-10-30 14:13:15 +00:00
Simon J. Gerraty
3caf0790a8 Merge head@256284 2013-10-13 02:35:19 +00:00
Alexander Motin
c1215c324a Fix mode page length calculation to remove last garbage line from the
`camcontrol mode daX -l` output.

PR
Approved by:	re (gjb)
MFC after:	2 weeks
2013-10-11 17:00:09 +00:00
Mark Johnston
e590690fad Fix an inverted check for the master user in "camcontrol security -U".
PR:		bin/182703
Submitted by:	Scott Burns <scott@bqinternet.com>
Approved by:	re (gjb)
MFC after:	3 days
2013-10-08 04:16:22 +00:00
Ed Maste
9d85dfae1e Fix resource leaks
Found by:	Coverity Scan, CID 1016673, 1007118
Approved by:	re
2013-10-07 16:45:16 +00:00
Simon J. Gerraty
d466a5b069 Merge head 2013-09-11 18:16:18 +00:00
Joel Dahl
5bb17266af - Begin sentence on a new line.
- Minor language fixes.
2013-09-07 05:44:53 +00:00
Bryan Venteicher
79c37de672 Bump .Dd after r255307 and r255310
Requested by:	joel
2013-09-06 21:26:36 +00:00
Bryan Venteicher
2872a0d81c Add firmware downloading support for Samsung drives
Tested on Samsung SM1625 SSDs.
2013-09-06 16:34:09 +00:00
Bryan Venteicher
ffead710d5 Add camcontrol support for the SCSI sanitize command
Reviewed by:	ken, mjacob (eariler version)
Sponsored by:	Netapp
2013-09-06 15:19:57 +00:00
Simon J. Gerraty
d1d0158641 Merge from head 2013-09-05 20:18:59 +00:00
Alexander Motin
27dfa8eb60 Add missing newlines to Fibre Channel attributes output. 2013-08-27 06:50:46 +00:00
Alexander Motin
126690fec1 Improve firmware download status check. Previous check was insufficient for
ATA since it ignored transport errors like command timeouts, while for SCSI
it was just wrong.
2013-06-14 08:26:58 +00:00