(that does not compile with !gcc). Moreover we get the benefit for all archs
that have a hand optimized in_cksum_skip().
Submitted by: yongari
Tested by: me (i386, extensivly), pf4freebsd ML (various)
calls further down the stack. If we find the cksum to be okay we pretend
that the hardware did all the work and hence keep the upper layers from
checking again.
Submitted by: Pyun YongHyeon
This fixes checksum for some drivers with partial H/W ckcsum offloads.
Reported by: Simon 'corecode' Schubert, Devon H. O'Dell, hmp
Reviewed by: Pyun YongHyeon
MFC:
Fix by dhartmei@
change pf_route() loop detection: introduce a counter (number of times
a packet is routed already) in the mbuf tag, allow at most four times.
Fixes some legitimate cases broken by the previous change.
Reviewed by: dhartmei
icmp_error() packets. While here retire PACKET_TAG_PF_GENERATED (which
served the same purpose) and use M_SKIP_FIREWALL in pf as well. This should
speed up things a bit as we get rid of the tag allocations.
Discussed with: juli
- Split the code out into if_clone.[ch].
- Locked struct if_clone. [1]
- Add a per-cloner match function rather then simply matching names of
the form <name><unit> and <name>.
- Use the match function to allow creation of <interface>.<tag>
vlan interfaces. The old way is preserved unchanged!
- Also the match function to allow creation of stf(4) interfaces named
stf0, stf, or 6to4. This is the only major user visible change in
that "ifconfig stf" creates the interface stf rather then stf0 and
does not print "stf0" to stdout.
- Allow destroy functions to fail so they can refuse to delete
interfaces. Currently, we forbid the deletion of interfaces which
were created in the init function, particularly lo0, pflog0, and
pfsync0. In the case of lo0 this was a panic implementation so it
does not count as a user visiable change. :-)
- Since most interfaces do not need the new functionality, an family of
wrapper functions, ifc_simple_*(), were created to wrap old style
cloner functions.
- The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
instead.
Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by: andre, mlaier
Discussed on: net
* block packets that fail to create state table entries
* only allow non-fragmented packets to influence whether or not a logged
packet is the same as the one logged before.
* correct the ICMP packet checksum fixing up when processing ICMP errors for NAT
* implement a maximum for the number of entries in the NAT table (NAT_TABLE_MAX
and ipf_nattable_max)
* frsynclist() wasn't paying attention to all the places where interface
names are, like it should.
* fix comparing ICMP packets with established TCP state where only 8 bytes
of header are returned in the ICMP error.
MFC after: 1 week
- prevent an endless loop with route-to lo0, fixes PR 3736 (dhartmei@)
- The rule_number parameter for pf_get_pool() needs to be 32 bits, not 8 -
this fixes corruption of the address pools with large rulesets.
(mcbride@, pb@)
Reviewed-by: dhartmei
Version 3.5 brings:
- Atomic commits of ruleset changes (reduce the chance of ending up in an
inconsistent state).
- A 30% reduction in the size of state table entries.
- Source-tracking (limit number of clients and states per client).
- Sticky-address (the flexibility of round-robin with the benefits of
source-hash).
- Significant improvements to interface handling.
- and many more ...
ALTQ enabled versions of IFQ_* macros by default, as requested by serveral
others. This is a follow-up to the quick fix I committed yesterday which
turned off the ALTQ checks for non-ALTQ kernels.
rig a PREPEND macro for ALTQ as the POLL/DEQUEUE semantic is very bad in
terms of locking. We make this a full functional queue to allow "bulk
dequeue" which will further reduce the locking overhead (for non-altq
enabled devices). Drivers will access this via the following macros, which
will show up in <net/if_var.h> once we expose ALTQ to the build:
IFQ_DRV_DEQUEUE(ifq, m) - takes a mbuf off the queue (driver queue first)
IFQ_DRV_PREPEND(ifq, m) - pushes a mbuf back to the driver queue
IFQ_DRV_PURGE(ifq) - drops all packets in both queues
IFQ_DRV_IS_EMPTY(ifq) - checks for pending mbufs in either queue
One has to make sure that the first three are protected by a driver mutex.
At the moment most network drivers still require Giant, so this is not an
issue. Even those that have thier own mutex usually hold it in if_start and
the like, so this requirement is almost always satisfied.
This evolved from a discussion with Andrew Gallatin.
- add locking
- disable ALTQ3_COMPAT by default (do not remove the code to keep the diff
towards KAME small)
- put some more code under ALTQ3 conditional compilation as it should be
- account for if_xname
- some more minor compile fixes
As people started wondering:
The strange path layout "altq/altq" is there to avoid "-Isys/contrib" and
make it "-Isys/contrib/altq" instead, as we will need at least <altq/altq.h>
and <altq/if_altq.h> for kernel compilation.
The "freebsd4_..." in the privious commit is just the best tag name in the
KAME tree I could find to classify this in order to track its history. It
does *not* mean that this will go to 4-STABLE or anything of that kind.
HEAD at this point). This will not exactly live in a vendor branch, but have
the vendor backing to make it easier to exchange diffs.
This will be followed by a diff which takes most of the .c files off the
vendor branch in order to:
- add locking
- disable ALTQ3_COMPAT code (which is outdated and "un-lockable")
There is work in progress to refine the configuration API. Import this "as
is" now to have more exposure time before 5-STABLE.
This is only the import, it will be some more days until you will actually
be able to compile ALTQ support into your kernel so don't hold your breath.
HEADUPs will be posted on current@ and net@ before this is actually enabled.
No-objection: re(scottl), core(rwatson)
- change pf_get_pool() argument rule_number type from u_int32_t
to u_int8_t, fixes corruption of address pools with large
rulesets (mcbride@)
- prevent endless loops with route-to (dhartmei@)
- limit option length to 2 octets max (frantzen@)
Obtained from: OpenBSD
Approved by: mlaier(mentor), bms(mentor)
* In the resume path, give up after waiting for a while
for WAK_STS to be set. Some BIOSs never set it.
* Allow access to the field if it is within the region size rounded
up to a multiple of the access byte width. This overcomes "off-by-one"
programming errors in the AML often found in Toshiba laptops.
Fix by dhartmei@ and mcbride@
1.433
Properly m_copyback() modified TCP sequence number after demodulation
1.432
Fix icmp checksum when sequence number modlation is being used.
Also fix a daddr vs saddr cut-n-paste error in ICMP error handling.
Fixes PR 3724
Obtained from: OpenBSD
Reviewed by: dhartmei
Approved by: rwatson
Fix by dhartmei@ and mcbride@
1.433
Properly m_copyback() modified TCP sequence number after demodulation
1.432
Fix icmp checksum when sequence number modlation is being used.
Also fix a daddr vs saddr cut-n-paste error in ICMP error handling.
Fixes PR 3724
#ifdefs in order to loop it back to OpenBSD after the next import. There are
a some implicit asserts involved which might be better spelled out
explicitly (af == AF_INET ...)
Approved by: bms(mentor)
- Fix binat for incoming connections when a netblock (not just a single
address) is used for source in the binat rule. closes PR 3535, reported by
Karl O.Pinc. ok henning@, cedric@
- Fix a problem related to empty anchor rulesets, which could cause a kernel
panic.
Approved by: bms(mentor)
- Fix binat for incoming connections when a netblock (not just a single
address) is used for source in the binat rule. closes PR 3535, reported by
Karl O.Pinc. ok henning@, cedric@
- Fix a problem related to empty anchor rulesets, which could cause a kernel
panic.
Approved by: bms(mentor)
Also set HOOK_HACK to true (remove the related #ifdef's) as we have the
hooks in the kernel this was missed during the merge from the port.
Noticed by: Amir S. (for the HOOK_HACK part)
Approved by: bms(mentor)
always expects to be running on some MS OS. A survey of ASL shows that
this is the 2nd most common expected OS value. (1st is Win98 and we don't
emulate its buggy ACPI support.) Our ACPI support is similar to Win2k,
also. Put this behavior under ACPICA_PEDANTIC so we can get back to our
previous behavior for OSV testing.
pf/pflog/pfsync as modules. Do not list them in NOTES or modules/Makefile
(i.e. do not connect it to any (automatic) builds - yet).
Approved by: bms(mentor)
for a long time and is run in production use. This is the code present in
portversion 2.03 with some additional tweaks.
The rather extensive diff accounts for:
- locking (to enable pf to work with a giant-free netstack)
- byte order difference between OpenBSD and FreeBSD for ip_len/ip_off
- conversion from pool(9) to zone(9)
- api differences etc.
Approved by: bms(mentor) (in general)
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.
Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.
Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.
Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:
The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT
A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.
Manual page update to follow shortly.
be sure to increment the refcount of the argument so it is not
prematurely deleted. This is a workaround and may appear in a different
form in ACPI-CA. This fixes battery evaluation on Thinkpads that was
broken by fixing the Dell battery state.
Submitted by: Luming Yu <luming.yu@intel.com>
laptops that resulted in problems reading battery status. Don't
copy Buffers, Packages, or Regions in DsStoreObjectToLocal().
Tested by: scottl, sam
Submitted by: Luming Yu (Intel)
o support for 5112 and 2112 radios on 5212-based products
o revised interface for ah_procRxDesc needed to handle a race
condition created with the use of self-linked rx descriptors
o support for setting the MAC address
o remove some unused methods from the public API
o revised diagnostic API (replace dump* methods with getDiagState)
o const'ify set key cache method parameters
o support for optional 32khz sleep clock
o implement ah_setSlotTime for 5211 parts
o ANI improvements for 5212 parts
Approved by: re (scottl)
delete of objects. Also revert our temporary workaround in dsmthdat.c
that always copied objects. This is the correct fix for errors
evaluating _BST (and GBST) on IBM Thinkpads where an argument (Arg3)
was returned to the caller and the object was freed while still in use.
This will be in a future ACPI-CA dist.
Thanks to: kochi@netbsd.org, shaohua.li@intel.com
fixes an interrupt storm for certain users. This is done on the vendor
branch since the code is already in the 20031029 ACPI-CA dist and will
be imported after 5.2R.
Tested by: sebastian ssmoller <sebastian.ssmoller@gmx.net>
PR: i386/57909
Approved by: re (jhb)
on ia64. The bug is present in i386 as well but didn't show up due to
more relaxed page protections. This fix has been submitted to the vendor.
Submitted by: marcel
o change os glue API to be compatible with Linux so hal.o's can
be used on any system
o add ABI version to catch driver-HAL mismatches
o move hal version information from ah_osdep.c to binary component
o remove ath_hal_wait os glue component
o assign constant values to all enums to avoid potential compiler
incompatibilities
o add support for 3Com badged cards (PCI vendor ID)
o add support for IBM mini-pci cards (PCI device ID)
o expose MAC, PHY, and radio hardware revisions
o support for big-endian platforms
o new method to set slot time in us
o bug fix for 5211: beacon timers not setup correctly
o bug fix for 5212: don't crash when handed a 5112 radio
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
to a multiple of the access byte width. This overcomes errors in the
AML often found in Toshiba laptops. These errors were allowed by
the Microsoft ASL compiler and interpreter. This will NOT be imported
by ACPI-CA so make the change on our local branch. File was already off
the vendor branch.
Submitted by: blaz
Original idea: Rick Richardson for Linux
all the fixes locally applied and submitted to the author. Not
included in BETA 5, but part of this import are:
o FreeBSD specific ifdefs to make this compile within a kernel.
These are limited to include directives and defines.
o Removal of unused variables, proper casts and initializations
to allow building with -Werror. This happens in code so has a
higher chance of causing future import conflicts but not enough
to worry about it.
I'm especially thankful that the author accepted the change to
replace DISABLE_TRACE with UWX_TRACE_ENABLE so that we can use it
in kernel config files without nasty mappings or indirections as
that would make the integration less perfect. Thanks Cary!
extended irq lists. If the resource has a trailing byte but not the full
resource string, do not attempt to parse the resource string. This fixes
panics on transition to battery and shutdown for Larry. Patch has been
submitted to vendor and they will incorporate in next release.
Tested by: Larry Rosenman <ler@lerctr.org>
PR: kern/56254
i/o ports by calling the implementation-detail level below inb() and
outb() instead of inb() and outb(). Unpessimizing the types is too
hard since they are mainly used in microcode.
o correct BSSID setup in ah_writeAssocid for 5211 and 5212 (fixes
reception of broadcast frames after association)
o correct transmit retry counts returned by 5211 in ah_procTxDesc
o add missing regulatory domain support that caused use of 11b channels to be
disallowed with some cards (e.g. mini-pci cards in certain IBM laptops)
o miscellaneous fixes to regulatory domain support
o increase size of 5212 ANI table to avoid overflow
o add monitor mode
o remove OS_QSORT support
o fix handling of HAL_RXDESC_INTREQ in ah_setupRxDesc
o rewrite 5212 descriptor handling for portability
o FreeBSD: track alq_open API change
default. There were 2 cases where the trace code was in the else-
part of an if-statement without any compound construct to protect
against nullification. The result was that 2 unconditional statements
turned into conditional statements and wrecked havoc.
This fix has been returned to the vendor and in anticipation of a
future import committed onto the vendor branch.
compilation accordingly. The net effect is that tracing is not by
default present and that it can easily be compiled-in.
The tracer uses getenv() and printf(), which cannot be used in all
cases (ie from the debugger) and with this change we improved the
applicability of the unwinder.
This change is made on the vendor branch and given back to the
vendor for possible inclusion in future versions.
ID allocation is not there yet. This fixes a few warnings about \_OS_ not
being found and an S3 freeze for one user.
Re-staticize AcpiNsRemoveReference() since it is not needed elsewhere.
Approved by: re (scottl)
