That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.
Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.
-Guido
Note: this should be tested first (Rich?). Tested by rgrimes
in your config file from:
device cd0
device cd1
...
device cdn
to either
device cd0
or
psuedo-device cd0
The driver now dynamically allocates all per unit dependent structs, so it
will never run out of units (okay, so now we need 32 bit device major/minor
numbers!). It will allocate unit numbers as it needs them.
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards
Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
going to panic shortly after this anyway. Destroys less state, and
keeps the machine from waiting for someone to smash the return key
a few times before it panics!
Subject: Install.notes for FreeBSD-1.0-G
Here is the hacked install notes file for FreeBSD-1.0-GAMMA.
Please get someone to check the few points marked <<please check>>.
From: rgrimes
Checked the <<please check>>, and cleaned up some details.
data. cd_data is now malloced on a per unit basis.
Protected all if ({scsi,cd}_debug).... with #ifdef CDDEBUG to reduce the
the size of the kernel when not debugging.
Subject: Re: Some small errors in GAMMA
4. Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
and miscellaneous programs which get installed into /usr/distbin.
Install now recognizes existing DOS partitions and attempts to install
after them. Theoretically, it also remaps badblocks.
N.B.: The fourth install floppy must have a clean DOS FAT.
Building the new distribution floppies is untested
TODO: Build a disktab entry for existing DOS partitions (except extended
partitions). This would allow loading and/or extracting the distribution
files directly from the DOS hard disk partition.
-q turns on "quiet" mode, where informational headers and such are not
dumped, just the information.
-L Shows full pathnames of files comprising a package. With -q,
this can be useful for doing fileset operations, such as
"du -s `pkg_info -q -L foo_bin`" to see how much space package
"foo_bin" is taking up.
The following additional changes are needed for the new install disks:
1) Remove from filesystem disk's /filelist: bin/cat, dev/MAKEDEV.local.
2) Remove from the filesystem disk: /bin/cat, /COPYRIGHT and /dev/MAKEDEV.local.
3) Add to the filesystem disk: /sbin/fdisk, /dev/fd1a and /dev/rfd1a.
4) Build a fourth DOS disk containing at least: os-bs, rz/sz
Outstanding problems:
1) If there are >1024 cylinders, then FreeBSD cannot boot unless installed
at cylinder 0 (and since neither can DOS evidently, the two can't share
a disk in this case).
2) If FreeBSD is installed at cylinder 0, subsequent installs tend to fail.
3) If a DOS partition exists, disklabel doesn't seem to update the disk
geometry in the FreeBSD disklabel correctly (so reinstalling FreeBSD with
a new geometry requires installing it at cylinder 0). Rod suggested
invoking disklabel on the raw c-partition. This makes sense, but it
doesn't seem to work (newfs, for instance, can't find the new label).
Added support of DONET({IMP,NS,ISO}) so you can now compile with options
NS and ISO, still missing some IMP code, but since the imp is old and
gone I doubt this will ever be used.
Subject: More information on "netstat -r
Date: Mon, 7 Jun 1993 11:57:33 +0100
Gentlemen,
I have been trying for some time now to get "netstat -r"
working from the 0.2.2 patchkit. I have the following solution to the
bug.
The symbol _radix_node_head needs to be added to the symbols.raw file
to enable the new routing table access. If this symbol is not present
then the old system us used which results in no routes being given. I
don't think that this justifies a patch in its own right but perhaps
could be added to a related patch sometime..
other tools really want.
Targets sio*) and com*) now create entry named ttyxx, default setup with
a sh MAKEDEV all is to use the sio major numbers, com is all but depreicated
now.
ld won't generate output if there are two .o files with the same
name. It thinks they are multiply defined external references. This
patch explictly allows multiple /file names/ with the same value.
This can happen if you do a two stage link or if you link in file
names that are identical to files in libc.
Otherwise ld.c exits with a status=1 and non error message. Rich
From: bde@kralizec.zeta.org.au (Bruce Evans)
This fixes several problems.
It has almost everything that is in the FreeBSD version of Aug 22.
It is missing the bug for 2 drives and still prints <> around the
drive type. It handles BADEND144 less verbosely. It does wdgetctlr()
somewhat differently from NetBSD/FreeBSD.
Date: Sun Sep 5 06:45:12 PDT 1993
From: rgrimes@cdrom.com
Fixed printf's to be correct, since Bruce used the old ones. This driver
still prints phantom wd1's on some Maxtor and other IDE drives, I have
a patch I am sending to Bruce for checking.
