4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message
illumos/illumos-gate@31d7e8fa33
FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use. vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.
MFC after: 2 weeks
SHT_RELA sections properly instead of assuming that the relocation section
is of type SHT_REL.
Submitted by: Prashanth Kumar <pra_udupi@yahoo.co.in> (original version)
MFC after: 1 month
4171 clean up spa_feature_*() interfaces
4172 implement extensible_dataset feature for use by other zpool
features
illumos/illumos-gate@2acef22db7
MFC after: 2 weeks
4168 ztest assertion failure in dbuf_undirty
4169 verbatim import causes zdb to segfa
4170 zhack leaves pool in ACTIVE state
illumos/illumos-gate@7fdd916c47
MFC after: 2 weeks
(64MB). Even if we would find one somehow, ZFS kernel code rejects such
devices. It is funny to look on attempts to read 4 256K vdev labels from
1.44MB floppy, though it is not very practical and quite slow.
expect the installed ksh binary to be named "ksh", which is not the case
when it's installed on FreeBSD via the shells/ksh93 port. Allow for it to be
"ksh93" as well so that the tests can actually pass.
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4104 ::spa_space no longer works
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab
illumos/illumos-gate@0713e232b7
Note that some tunables have been removed and some new tunables have
been added. Of particular note, FreeBSD-only knob
vfs.zfs.space_map_last_hope is removed as it was a nop for some time now
(after one of the previous merges from upstream).
MFC after: 11 days
Sponsored by: HybridCluster [merge]
illumos/illumos-gate@69962b5647
Please note the following changes:
- zio_ioctl has lost its priority parameter and now TRIM is executed
with 'now' priority
- some knobs are gone and some new knobs are added; not all of them are
exposed as tunables / sysctls yet
MFC after: 10 days
Sponsored by: HybridCluster [merge]
943 zio_interrupt ends up calling taskq_dispatch with TQ_SLEEP
illumos/illumos-gate@5aeb94743e
Essentially FreeBSD taskqueues already operate in a mode that
was added to Illumos with taskq_dispatch_ent change.
We even exposed the superior FreeBSD interface as taskq_dispatch_safe.
Now we just rename taskq_dispatch_safe to taskq_dispatch_ent and
struct struct ostask to taskq_ent_t, so that code differences will be
minimal.
After this change sys/cddl/compat/opensolaris/sys/taskq.h header is no
longer needed.
Note that this commit is not an MFV because the upstream change was not
individually committed to the vendor area.
MFC after: 8 days
On some architectures (powerpc), char is unsigned by default, which means
comparisons against -1 always fail, so the programs get stuck in an
infinite loop.
MFC after: 1 week
to ILP32. Otherwise dtrace -G will attempt to use it on amd64 if it can't
determine which data model to use, which happens when -64 is omitted and
no object files are provided, e.g. with
# dtrace -G -n BEGIN
This would result in a linker error, but now works properly.
Also remove an unnecessary #ifdef.
MFC after: 2 weeks
The compiler will see the non-string literal arguments to the fprintf calls and
omit warnings for them. Quiese these warnings in contrib code:
cddl/contrib/opensolaris/lib/libnvpair/libnvpair.c:743:12: warning: format
string is not a string literal (potentially insecure) [-Wformat-security]
ARENDER(pctl, nvlist_array, nvl, name, val, nelem);
installed. Additionally, remove Solaris-specific sections and references,
and replace example outputs with output from lockstat on FreeBSD, since
lockstat's output contains stack traces.
This change also removes some examples that don't seem to work properly on
FreeBSD. The examples should be re-added when lockstat is fixed.
Reported by: avg
MFC after: 1 week
available under Oracle Solaris 11.
This includes an update to the ZFS(8) man page to reflect all the
available alias (snap, umount, and recv).
Initial changes obtained from ZFS On Linux + fixes for man page and cmd
help:
10b75496bbcf81b00a73
Obtained from: https://github.com/zfsonlinux/zfs
MFC after: 2 weeks
Sponsored by: Multiplay
null-separated strings to a single string. This can be used to print the
full arguments of a process using execsnoop (from the DTrace toolkit) or
with the following one-liner:
dtrace -n 'syscall::execve:return {trace(curpsinfo->pr_psargs);}'
Note that this relies on the process arguments being cached via the struct
proc, which means that it will not work for argvs longer than
kern.ps_arg_cache_limit. However, the following rather non-portable
script can be used to extract any argv at exec time:
fbt::kern_execve:entry
{
printf("%s", memstr(args[1]->begin_argv, ' ',
args[1]->begin_envv - args[1]->begin_argv));
}
The debug.dtrace.memstr_max sysctl limits the maximum argument size to
memstr(). Thanks to Brendan Gregg for helpful comments on freebsd-dtrace.
Tested by: Fabian Keil (earlier version)
MFC after: 2 weeks
don't make sense on FreeBSD. In particular,
- remove the ATTRIBUTES section,
- remove references to the Solaris Dynamic Tracing Guide, except in the
SEE ALSO section,
- update the description of the -A option for FreeBSD's implementation,
- remove references to Solaris-specific programs and configuration files,
and replace them with FreeBSD equivalents where possible.
The content has not changed aside from this.
Approved by: re (joel)
MFC after: 1 week
input path. These probes get some of the fields in host order, whereas the
output probes get them in network order, so a single translator isn't
enough. This workaround ensures that the problem is essentially invisble
to users: none of the probe arguments or their fields have changed.
Approved by: re (hrs)
Add support of Illumos dumps on zvol over RAID-Z.
Note that this only adds the features. FreeBSD would
still need more work to support dumping on zvols.
Illumos ZFS issues:
2932 support crash dumps to raidz, etc. pools
MFC after: 1 month
Approved by: re (ZFS blanket)
Illumos ZFS issues:
3582 zfs_delay() should support a variable resolution
3584 DTrace sdt probes for ZFS txg states
Provide a compatibility shim for Solaris's cv_timedwait_hires
to help aid future porting.
Approved by: re (ZFS blanket)
These programs and everything using libzpool rely on the embedded asserts to
verify the correctness of operations. Given that, the core dumps would be
useless without debug symbols.
2942 CTF tools need to handle files which legitimately lack data
2978 ctfconvert still needs to ignore legitimately dataless files on SPARC
Illumos Revisions: 13745:6b3106b4250f
13754:7231b684c18b
Reference:
https://www.illumos.org/issues/2942https://www.illumos.org/issues/2978
MFC after: 3 weeks
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.
Tested by: gnn, hiren
MFC after: 1 month
Don't treat the parameter as a number (pool GUID) when there is
error converting it from string, instead, treat it as the pool
name.
Illumos ZFS issues:
1765 assert triggered in libzfs_import.c trying to import pool
name beginning with a number
To quote original Illumos ticket:
libctf thinks that any ELF file containing more than 65536 sections is
corrupt, because it doesn't understand the SHN_XINDEX magic.
Illumos DTrace issues:
4005 libctf can't deal with extended sections
Illumos DTrace issues:
3089 want ::typedef
3094 libctf should support removing a dynamic type
3095 libctf does not validate arrays correctly
3096 libctf does not validate function types correctly
minimum allocation size for devices. Use this information to
automatically increase ZFS's minimum allocation size for new top-level
vdevs to a value that more closely matches the optimum device
allocation size.
Use GEOM's stripesize attribute, if set, as the physical sector
size of the GEOM.
Calculate the minimum blocksize of each metaslab class. Use the
calculated value instead of SPA_MINBLOCKSIZE (512b) when determining
the likelyhood of compression yeilding a reduction in physical space
usage.
Report devices with sub-optimal block size configuration in "zpool
status". Also properly fail attempts to attach devices with a
logical block size greater than 8kB, since this will cause corruption
to ZFS's label area.
Sponsored by: Spectra Logic Corporaion
MFC after: 2 weeks
Background
==========
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.
Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:
1) Existing pools created with devices that have different logical
and physical block sizes, but were configured to use the logical
block size (e.g. because the OS version used for pool construction
reported the logical block size instead of the physical block
size) will suddenly find that the vdev allocation size has
increased. This can be easily tolerated for active members of
the array, but ZFS would prevent replacement of a vdev with
another identical device because it now appears that the smaller
allocation size required by the pool is not supported by the new
device.
2) The device's physical block size may be too large to be supported
by ZFS. The optimal allocation size for the vdev may be quite
large. For example, a RAID controller may export a vdev that
requires read-modify-write cycles unless accessed using 64k
aligned/sized requests. ZFS currently has an 8k minimum block
size limit.
Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h:
Add the SPA_ASHIFT constant. ZFS currently has a hard upper
limit of 13 (8k) for ashift and this constant is used to
both document and enforce this limit.
sys/cddl/contrib/opensolaris/uts/common/sys/fs/zfs.h:
Add the VDEV_AUX_ASHIFT_TOO_BIG error code.
Add fields for exporting the configured, logical, and
physical ashift to the vdev_stat_t structure.
Add VDEV_STAT_VALID() macro which can be used to verify the
presence of required vdev_stat_t fields in nvlist data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
Provide a SYSCTL_PROC handler for "max_auto_ashift". Since
the limit is only referenced long after boot when a create
operation occurs, there's no compelling need for it to be
a boot time configurable tunable. This also allows the
validation code for the max_auto_ashift value to be contained
within the sysctl handler.
Populate the new fields in the vdev_stat_t structure.
Fail vdev opens if the vdev reports an ashift larger than
SPA_MAXASHIFT.
Propogate vdev_logical_ashift and vdev_physical_ashift between
child and parent vdevs as is done for vdev_ashift.
In vdev_open(), restore code that fails opens for devices
where vdev_ashift grows. This can only happen now if the
device's logical ashift grows, which means it really isn't
safe to use the device.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c:
Update the vdev_open() API so that both logical (what was
just ashift before) and physical ashift are reported.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
Add two new fields, vdev_physical_ashift and vdev_logical_ashift,
to vdev_t.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
Add vdev_ashift_optimize(). Call it anytime a new top-level
vdev is allocated.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
Add text for the VDEV_AUX_ASHIFT_TOO_BIG error.
For each sub-optimally configured leaf vdev, report configured
and native block sizes.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Introduce a new zpool status: ZPOOL_STATUS_NON_NATIVE_ASHIFT.
This status is reported on healthy pools containing vdevs
configured to use a block size smaller than their reported
physical block size.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Update find_vdev_problem() and supporting functions to
provide the full vdev_stat_t structure to problem checking
routines, and to allow decent into replacing vdevs.
Add a vdev_non_native_ashift() validator which is used on
the full vdev tree to check for ZPOOL_STATUS_NON_NATIVE_ASHIFT.
cddl/contrib/opensolaris/lib/libzpool/common/kernel.c:
cddl/contrib/opensolaris/lib/libzpool/common/sys/zfs_context.h:
Enhance sysctl userland stubs now that a SYSCTL_PROC handler
is used in vdev.c.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab_impl.h:
When the group membership of a metaslab class changes (i.e.
when a vdev is added or removed from a pool), walk the group
list to determine the smallest block size currently available
and record this in the metaslab class.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
Add the metaslab_class_get_minblocksize() accessor.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio_compress.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In zio_compress_data(), take the minimum blocksize as an
input parameter instead of assuming SPA_MINBLOCKSIZE.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In l2arc_compress_buf(), pass SPA_MINBLOCKSIZE as the minimum
blocksize of the device. The l2arc code performs has it's own
code for deciding if compression is worth while, so this
effectively disables zio_compress_data() from second guessing
the original decision.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c:
In zio_write_bp_init(), use the minimum blocksize of the
normal metaslab class when compressing data.
Illumos ZFS issues:
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if
physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Fix a regression introduced by fix for Illumos bug #3834. Quote from
Matthew Ahrens on the Illumos issue:
ztest fails this assertion because ztest_dmu_read_write() does
dmu_tx_hold_free(tx, bigobj, bigoff, bigsize);
and then
dmu_object_set_checksum(os, bigobj,
(enum zio_checksum)ztest_random_dsl_prop(ZFS_PROP_CHECKSUM), tx);
If the region to free is past the end of the file, the DMU assumes that there
will be nothing to do for this object. However, ztest does set_checksum(),
which must modify the dnode. The fix is for ztest to also call
dmu_tx_hold_bonus(tx, bigobj);
so we can account for the dirty data associated with setting the checksum
Illumos ZFS issues:
3955 ztest failure: assertion refcount_count(&tx->tx_space_written)
+ delta <= tx->tx_space_towrite
