only meaningful for fragments. Also don't bother to byte-swap the
ip_id when we do generate it; it is only used at the receiver as a
nonce. I tried several different permutations of this code with no
measurable difference to each other or to the unmodified version, so
I've settled on the one for which gcc seems to generate the best code.
(If anyone cares to microoptimize this differently for an architecture
where it actually matters, feel free.)
Suggested by: Steve Bellovin's paper in IMW'02
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
(See: ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt)
This fulfills the host requirements for userland support by
way of the setsockopt() IP_EVIL_INTENT message.
There are three sysctl tunables provided to govern system behavior.
net.inet.ip.rfc3514:
Enables support for rfc3514. As this is an
Informational RFC and support is not yet widespread
this option is disabled by default.
net.inet.ip.hear_no_evil
If set the host will discard all received evil packets.
net.inet.ip.speak_no_evil
If set the host will discard all transmitted evil packets.
The IP statistics counter 'ips_evil' (available via 'netstat') provides
information on the number of 'evil' packets recieved.
For reference, the '-E' option to 'ping' has been provided to demonstrate
and test the implementation.
- Don't try to fragment the packet if it's smaller than mbuf_frag_size.
- Preserve the size of the mbuf chain which is modified by m_split().
- Check that m_split() didn't return NULL.
- Make it so we don't end up with two M_PKTHDR mbuf in the chain.
- Use m->m_pkthdr.len instead of m->m_len so that we fragment the whole
chain and not just the first mbuf.
- Fix a nearby style bug and rework the logic of the loops so that it's
more clear.
This is still not quite right, because we're clearly abusing m_split() to
do something it was not designed for, but at least it works now. We
should probably move this code into a m_fragment() function when it's
correct.
allows you to tell ip_output to fragment all outgoing packets
into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes.
This is an excellent way to test if network drivers can properly
handle long mbuf chains being passed to them.
net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation)
so that you can at least boot before your network driver dies. :)
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.
Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
ipsec4_process_packet; they happen when a packet is dropped because
an SA acquire is initiated
Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com>
so that it can be reused elsewhere (there is a number of places
where it can be useful). This also trims some 200 lines from
the body of ip_output(), which helps readability a bit.
(This change was discussed a few weeks ago on the mailing lists,
Julian agreed, silence from others. It is not a functional change,
so i expect it to be ok to commit it now but i am happy to back it
out if there are objections).
While at it, fix some function headers and replace m_copy() with
m_copypacket() where applicable.
MFC after: 1 week
No functional changes, but:
+ the mrouting module now should behave the same as the compiled-in
version (it did not before, some of the rsvp code was not loaded
properly);
+ netinet/ip_mroute.c is now truly optional;
+ removed some redundant/unused code;
+ changed many instances of '0' to NULL and INADDR_ANY as appropriate;
+ removed several static variables to make the code more SMP-friendly;
+ fixed some minor bugs in the mrouting code (mostly, incorrect return
values from functions).
This commit is also a prerequisite to the addition of support for PIM,
which i would like to put in before DP2 (it does not change any of
the existing APIs, anyways).
Note, in the process we found out that some device drivers fail to
properly handle changes in IFF_ALLMULTI, leading to interesting
behaviour when a multicast router is started. This bug is not
corrected by this commit, and will be fixed with a separate commit.
Detailed changes:
--------------------
netinet/ip_mroute.c all the above.
conf/files make ip_mroute.c optional
net/route.c fix mrt_ioctl hook
netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here
together with other rsvp code, and a couple
of indentation fixes.
netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks
netinet/ip_var.h rsvp function hooks
netinet/raw_ip.c hooks for mrouting and rsvp functions, plus
interface cleanup.
netinet/ip_mroute.h remove an unused and optional field from a struct
Most of the code is from Pavlin Radoslavov and the XORP project
Reviewed by: sam
MFC after: 1 week
Remove the never completed _IP_VHL version, it has not caught on
anywhere and it would make us incompatible with other BSD netstacks
to retain this version.
Add a CTASSERT protecting sizeof(struct ip) == 20.
Don't let the size of struct ipq depend on the IPDIVERT option.
This is a functional no-op commit.
Approved by: re
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).
As noted previously, don't use FAST_IPSEC with INET6 at the moment.
Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
inpcb parameter to ip_output and ip6_output to allow the IPsec code to
locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version
Reviewed by: julian, luigi (silent), -arch, -net, darren
Approved by: julian, silence from everyone else
Obtained from: openbsd (mostly)
MFC after: 1 month
o Move len initialization closer to place of its first usage.
o Compare len with 0 to improve readability.
o Explicitly zero out phlen in ip_insertoptions() in failure case.
Suggested by: jhb
Reviewed by: jhb
MFC after: 2 weeks
kernel access control.
When fragmenting an IP datagram, invoke an appropriate MAC entry
point so that MAC labels may be copied (...) to the individual
IP fragment mbufs by MAC policies.
When IP options are inserted into an IP datagram when leaving a
host, preserve the label if we need to reallocate the mbuf for
alignment or size reasons.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
This was always broken in HEAD (the offending statement was introduced
in rev. 1.123 for HEAD, while RELENG_4 included this fix (in rev.
1.99.2.12 for RELENG_4) and I inadvertently deleted it in 1.99.2.30.
So I am also restoring these two lines in RELENG_4 now.
We might need another few things from 1.99.2.30.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
packet forwarding state ("annotations") during ip processing.
The code is considerably cleaner now.
The variables removed by this change are:
ip_divert_cookie used by divert sockets
ip_fw_fwd_addr used for transparent ip redirection
last_pkt used by dynamic pipes in dummynet
Removal of the first two has been done by carrying the annotations
into volatile structs prepended to the mbuf chains, and adding
appropriate code to add/remove annotations in the routines which
make use of them, i.e. ip_input(), ip_output(), tcp_input(),
bdg_forward(), ether_demux(), ether_output_frame(), div_output().
On passing, remove a bug in divert handling of fragmented packet.
Now it is the fragment at offset 0 which sets the divert status of
the whole packet, whereas formerly it was the last incoming fragment
to decide.
Removal of last_pkt required a change in the interface of ip_fw_chk()
and dummynet_io(). On passing, use the same mechanism for dummynet
annotations and for divert/forward annotations.
option IPFIREWALL_FORWARD is effectively useless, the code to
implement it is very small and is now in by default to avoid the
obfuscation of conditionally compiled code.
NOTES:
* there is at least one global variable left, sro_fwd, in ip_output().
I am not sure if/how this can be removed.
* I have deliberately avoided gratuitous style changes in this commit
to avoid cluttering the diffs. Minor stule cleanup will likely be
necessary
* this commit only focused on the IP layer. I am sure there is a
number of global variables used in the TCP and maybe UDP stack.
* despite the number of files touched, there are absolutely no API's
or data structures changed by this commit (except the interfaces of
ip_fw_chk() and dummynet_io(), which are internal anyways), so
an MFC is quite safe and unintrusive (and desirable, given the
improved readability of the code).
MFC after: 10 days
were totally useless and have been removed.
ip_input.c, ip_output.c:
Properly initialize the "ip" pointer in case the firewall does an
m_pullup() on the packet.
Remove some debugging code forgotten long ago.
ip_fw.[ch], bridge.c:
Prepare the grounds for matching MAC header fields in bridged packets,
so we can have 'etherfw' functionality without a lot of kernel and
userland bloat.
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
pointer which will then result in the allocated route's reference
count never being decremented. Just flood ping the localhost and
watch refcnt of the 127.0.0.1 route with netstat(1).
Submitted by: jayanth
Back out ip_output.c,v 1.143 and ip_mroute.c,v 1.69 that allowed
ip_output() to be called with a NULL route pointer. The previous
paragraph shows why this was a bad idea in the first place.
MFC after: 0 days
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
- Clear the cached destination before getting another cached route.
Otherwise, garbage in the padding space (which might be filled in if it was
used for IPv4) could annoy rtalloc.
Obtained from: KAME
An old route will be NULL at that point if a packet were initially
routed to an interface (using the IP_ROUTETOIF flag.)
Submitted by: Igor Timkin <ivt@gamma.ru>
called and ip_output() encounters an error and bails (i.e. host
unreachable), we will leak an mbuf. This is because the code calls
m_freem(m0) after jumping to the bad: label at the end of the function,
when it should be calling m_freem(m). (m0 is the original mbuf list
_without_ the options mbuf prepended.)
Obtained from: NetBSD
