Commit Graph

55 Commits

Author SHA1 Message Date
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Pyun YongHyeon
861cf54c59 Add a new sysctl node 'dev.bfe.N.stats' that shows various MAC
counters for Rx/Tx statistics. Various counters in ifnet is also
updated with these hardware counters.

Tested by:	kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
		Ulrich Spoerlein uspoerlein at gmail dot com
2008-08-22 06:46:55 +00:00
Pyun YongHyeon
2be30c0d91 Because bfe(4) knows interrupt mask value there is no need to read
interrupt mask register again. This saves one register access per
each interrupt.
Also don't try to process frames when driver is not running.

Tested by:	kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
		Ulrich Spoerlein uspoerlein at gmail dot com
2008-08-22 04:52:21 +00:00
Pyun YongHyeon
49bbfbc525 Remove bfe_link in softc and introduce two new flags to mark
link state and detach request.
While I'm here make sure established link is IFM_10_T or
IFM_100_TX as bfe(4) just supports 10/100Mbps media.

Tested by:	kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
		Ulrich Spoerlein uspoerlein at gmail dot com
2008-08-22 01:06:25 +00:00
Pyun YongHyeon
96ee09c546 o Sort includes and add <endian.h> to support endianness.
o Removed unneeded header files.
 o bus_dma(9) fix:
   - created parent tag with 1GB dma address limit with no
     alignment restrictions.
   - set 4096 alignment limit for Tx/Rx descriptor rings.
   - separate Rx buffer tag from Tx buffer tag such that Tx tag
     allows up-to 16 segments while Rx buffer tag only allows
     single segment.
   - it seems the controller has no alignment restrictions on Tx/Rx
     buffers. Remove ETHER_ALIGN alignment restriction in Tx/Rx
     buffers.
   - created a spare Rx dma map which would be used to cope with
     failure of loading a dma map.
   - make sure to load full Tx/Rx descriptor size for Tx/Rx
     descriptor dma maps, previously bfe(4) used to load single
     descriptor size for each descriptor rings. I have no idea how
     it could be run without problems.
   - don't blindly cast bus_addr_t type to 32bits in bfe_dma_map().
   - created bfe_dma_free() to free allocated dma memory/tags.
   - make sure to invoke bus_dmamap_sync(9) before/after processing
     descriptor rings/buffers. Because the hardware has severe dma
     address space limitation, bounce-buffers would be always used
     on systems with more than 1GB memory during
     descriptors/buffers access.
   - added Tx descriptor ring initialization function,
     bfe_list_tx_init().
   - moved producer/consumer index initialization to
     bfe_list_tx_init() and bfe_list_rx_init() from
     bfe_chip_reset().
   - added bfe_discard_buf() which will update loaded descriptors
     without unloading/reloading the dma map to speed up error
     recovery.
   - implemented Tx side bus_dmamap_load_mbuf_sg(9). The number of
     segments allowed was chosen to be 16 which should be enough for
     non-TSO capable hardwares. Setting SOF bit of Tx descriptor is
     done in the last to avoid potential race.
   - don't give up sending frames in bfe_start() until the hardware
     lacks free descriptors.
   - added XXX comment to second kick command and possible workaround.
   - implemented Rx side bus_dmamap_load_mbuf_sg(9).
   - removed bfe_dma_map_desc() as it's not needed anymore after
     the conversion to bus_dmamap_load_mbuf_sg(9).
   - added endianness support. With this change bfe(4) should work
     on any architectures that can create bounce buffers within 1GB
     address range.
   - add missing bus_dmamap_sync() in bfe_tx_eof()/bfe_rx_eof().
 o Use PCI_BAR instead of hardcoded value to set BARs.
   Simplified register access with bus_write_4(9)/bus_read_4(9) and
   removed bfe_btag, bfe_bhandle, bfe_vhandle in softc as it's not
   used anymore.
 o Reorder device detach logic such that bfe_detach() is also used
   for handling driver attach failure case.
 o Remove unnecessary KASSERT in bfe_detach().
 o Remove bfe_rx_cnt, bfe_up, bfe_vpd_prodname, bfe_vpd_readonly in
   softc.  It's not used at all.
 o Remove BFE_RX_RING_SIZE/BFE_RX_RING_SIZE/BFE_LINK_DOWN.

Tested by:	kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
		Ulrich Spoerlein uspoerlein at gmail dot com
2008-08-21 04:21:53 +00:00
Pyun YongHyeon
a823cbc6f7 Use device_set_desc() instead of device_set_desc_copy() as we don't
manipulate the verbose description of a device.
2008-08-11 01:49:46 +00:00
Pyun YongHyeon
a73a40561c Partial back out r180952.
pci_get_vendor() and pci_get_device() don't do configuration space
 accessses so cahcing them makes no sense.
Pointed out by: jhb, imp, des
2008-08-11 01:45:05 +00:00
Pyun YongHyeon
cde2511802 style(9) - space after keywords, don't indent case. 2008-07-29 09:02:00 +00:00
Pyun YongHyeon
2229ae4a5e Cache PCI vendor/device ids to avoid unnecessary PCI configuration
space access in device probe.
Also nuke referencing softc in device probe.
2008-07-29 08:49:36 +00:00
Pyun YongHyeon
be280562a1 s/printf/device_printf/g
Don't hard code function name in device_printf() and use __func__.
While I'm here nuke bfe_unit in softc as it's not needed anymore.
2008-07-29 08:32:29 +00:00
Pyun YongHyeon
49b2d728a8 Don't panic even if bus_dmamap_load(9) was failed. Just return
ENOBUFS so callers can reuse previous mbuf.

Submitted by:	Oleg  (agile.quad AT gmail DOT com)
MFC after:	1 week
2008-04-30 02:49:24 +00:00
Pyun YongHyeon
6ceb40baa9 Fix link state handling in bfe(4).
o conversion to callout(9) API.
 o add a missing driver lock in bfe_ifmedia_sts().
 o use our callout to drive watchdog timer.
 o restart Tx routine if pending queued packets are present in
   watchdog handler.
 o unarm watchdog timer only if there are no queued packets.
 o don't blindly reset phy and let phy driver handle link change
   request in bfe_init_locked().
 o return the status of mii_mediachg() to caller in
   bfe_ifmedia_upd(). Previously it always returned 0 to caller.
 o add check for IFF_DRV_RUNNING flag as well as IFF_DRV_OACTIVE
   in bfe_start_locked().
 o implement miibus_statchg method that keeps track of current
   link state changes as well as negotiated speed/duplex/
   flow-control configuration.
   Reprogram MAC to appropriate duplex state. Flow-control
   configuration was also implemented but commented out at the
   moment. The flow-control configuration will be enabled again
   after we have general flow-control framework in mii layer.

Reported by:	Yousif Hassan < yousif () alumni ! jmu ! edu >
Tesdted by:	Yousif Hassan < yousif () alumni ! jmu ! edu >
2008-01-29 02:15:11 +00:00
Pyun YongHyeon
6a087a8722 Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
6daee769f4 Add suspend/resume support. Unlike many other NIC drivers,
bfe_init_locked() wasn't sufficient to bring the chip back to life, it also
required a call to bfe_chip_reset() during resume.

Tested by:	Stepan Zastupov +redchrom at gmail+
MFC after:	1 week
2006-11-20 23:30:07 +00:00
Mike Silbersack
3981b687c0 Back out the BUS_DMA_ALLOCNOW change from rev 1.39. Scottl informed me that
it's unnecessary, as the TX/RX lists are static allocations.
2006-05-28 20:35:39 +00:00
Mike Silbersack
678d2a9a8c 1. Make sure that the TX and RX descriptor rings are 4096 byte aligned.
Also use BUS_DMA_ALLOCNOW to be on the safe side.

2.  Look for the Descriptor Error, and Descriptor Protocol Error flags from
    the card, and down the interface if we detect either.

#1 (along with fixes to busdma) makes sure that this card works in all
memory situations.  Prior to this change, it was just luck that 512 count
RX/TX lists were properly aligned.  Now we can use any size of RX/TX lists
and still have them properly aligned.

#2 ensures that we don't get into an endless interrupt storm if busdma fails
us.  Descriptor Protocol Error would occur if we misaligned the TX/RX rings,
and Descriptor Error would occur if we tried to give the card descriptors
or rings with addresses > 1G.  Trying to reinitialize the card isn't going
to fix these errors, hence we don't try.
2006-05-28 18:41:47 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Mike Silbersack
5511c4d6dc Fix three more bugs in bfe:
- Fix bfe_encap so that it will pass the address of the mbuf back up to its
  caller if/when it modifies it, as it does when doing a m_defrag on a mbuf chain.
- Make sure to unload the dmamap for ALL fragments of a packet, not just the first
- Use BUS_DMA_NOWAIT for all bus_dmamap_load calls so that the allocation of the
  map is not delayed - this driver is not set up to handle such delays.
- Reduce the number of RX and TX buffers bfe uses so that it does not use more
  bounce buffers than busdma is willing to allow it to use

With these changes, the driver now works properly for a user with a 2GB system,
and it also works on my system when the acceptable address range is lowered to 128MB.
Previously, both of these setups would act up after a few minutes of activity.
2006-05-04 07:41:01 +00:00
Mike Silbersack
981b2dea6b Tweak the DMA limit from rev 1.33, it was off by one byte.
Submitted by:	scottl
2006-04-28 05:38:12 +00:00
Mike Silbersack
cff1362221 Switch all bus_dmamap_sync calls that used PREREAD to PREWRITE and all
POSTWRITE to POSTREAD.

No guarantee that all busdma is usage is perfect, but this change (in
addition to scott's last two commits) makes if_bfe work with > 1GB of
memory in my laptop.
2006-04-28 05:27:27 +00:00
Scott Long
a6456c02ba The alignment parameter to busdma must be a power of two, while the if_bfe
driver was trying to use an arbitrary rx/tx ring size of the value.  Change
to using unrestricted values for alignment and boundary instead.
2006-04-27 23:03:00 +00:00
Scott Long
9171a12bcd Fix problem with having more than 1GM of RAM. Also fix a nearby busdma
problem.

Submitted by: silby
2006-04-27 14:02:58 +00:00
Pawel Jakub Dawidek
3d5e60cb6e Don't call bfe_release_resources() twice.
Found by:	Coverity Prevent analysis tool
CID:		600
MFC after:	1 week
2006-04-04 22:30:12 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Ruslan Ermilov
ad61f89618 Fix "struct ifnet" leaks when attach() fails in the middle. 2005-09-16 11:25:19 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
4d3c2a319c Powerstate stuff now done in PCI bus driver 2005-06-05 22:48:15 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Tai-hwa Liang
60c38bde75 Releasing TX/RX descriptor dmamaps during device detachment instead of
doing that in bfe_stop().

This should fix a panic recently reported on -current occuring when taking
device down then up.  In the original implementation, an "ifconfig bfe0 down"
triggers bfe_stop(), which also destroys all TX/RX descriptor dmamaps. Hence
the subsequent "ifconfig bfe0 up" would force the device to use those
already-released dmamap and thus panic the kernel.

PR:		kern/77804
Submitted by:	Frank Mayhar <frank at exit dot com>
Reviewed by:	dmlb, sam (mentor)
Tested by:	Phil <pcasidy at casidy dot com>, myself
MFC after:	1 week
2005-03-17 13:59:30 +00:00
Warner Losh
53ee71735f Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 19:06:12 +00:00
Sam Leffler
b03eb9a092 correct direction for bus_dma sync of rx buffer
Submitted by:	Tai-hwa Liang
2005-01-09 19:57:55 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Mike Makonnen
f16b4811d2 Locking cleanups to remove the need for a recursive mutex
o Instead of locking and unlocking all over the place, use
	  lock assertions to make certain that the bfe lock is held
	  where necessary.
	o Create locked and unlocked versions of bfe_init and bfe_start. These
	  functions can be called from outside the module and by functions
	  within the bfe module. The calls from outside the module don't
	  hold the bfe lock so the unlocked versions called by these functions
	  simple obtain the bfe lock and call the locked version.

- Fix a typo (scp) in the locking macros that only worked because in all the
  instances in which it was called the softc pointer happened to be named 'sc'.

- Mark the interrupt MPSAFE

Tested by: matusita, Dario Freni <saturnero@gufi.org>
Silence from: -net, wpaul
2004-10-23 08:33:10 +00:00
Max Laier
22d0ab2ef8 Fix sis, bfe and ndis in the same way dc was fixed:
Do not tell the hardware to send when there were no packets enqueued.

Found and reviewed by:	green
MFC after:		1 days
2004-10-08 16:14:42 +00:00
Dag-Erling Smørgrav
037fc73d96 Add PCI ID for the BCM4401-B0.
Submitted by:	krion
MFC after:	3 days
2004-09-01 06:10:11 +00:00
Dag-Erling Smørgrav
27de24a734 The whitespace crusader strikes! 2004-08-07 20:55:53 +00:00
Max Laier
7929aa036c Bring in the first chunk of altq driver modifications. This covers the
following drivers: bfe(4), em(4), fxp(4), lnc(4), tun(4), de(4) rl(4),
sis(4) and xl(4)

More patches are pending on: http://peoples.freebsd.org/~mlaier/ Please take
a look and tell me if "your" driver is missing, so I can fix this.

Tested-by:	many
No-objection:	-current, -net
2004-07-02 12:16:02 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Dag-Erling Smørgrav
df7593b5a4 Set the IFCAP_VLAN_MTU bit in capenable as well.
Reminded by:	ru
2004-05-25 11:33:19 +00:00
Dag-Erling Smørgrav
912bf9d37c Set baudrate to 100 Mbps, and advertise our ability to handle extended
frames (802.1q).

Submitted by:	Steinar Haug <sthaug@nethelp.no>
2004-05-25 11:04:01 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Duncan Barclay
62a9464c76 Apply fix for long timeouts on driver initialisation.
PR:		64656
Submitted by:	Jianqin Qu <jqu@its.brooklyn.cuny.edu>
Reviewed by:	dmlb
2004-05-23 08:35:07 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Julian Elischer
8fc8ef2efe When we get a packet error, move on, don't go into an infinite loop
looking at it.

fixes at least one cause of "hanging" due to this driver.
2004-03-02 05:43:42 +00:00