Otherwise, we could match on a filename that had the wrong last character
(such as /boot/loaded instead of /boot/loader).
PR: kern/95625
Submitted by: Oliver Fromme <olli@secnetix.de>
MFC after: 1 month
+ Add boatloads of KASSERTs and *really* check out more locking
issues (to catch recursions when we actually go to real locking
in CAM soon). The KASSERTs also caught lots of other issues like
using commands that were put back on free lists, etc.
+ Target mode: role setting is derived directly from port capabilities.
There is no need to set a role any more. Some target mode resources
are allocated early on (ELS), but target command buffer allocation
is deferred until the first lun enable.
+ Fix some breakages I introduced with target mode in that some commands
are *repeating* commands. That is, the reply shows up but the command
isn't really done (we don't free it). We still need to take it off the
pending list because when we resubmit it, bad things then happen.
+ Fix more of the way that timed out commands and bus reset is done. The
actual TMF response code was being ignored.
+ For SPI, honor BIOS settings. This doesn't quite fix the problems we've
seen where we can't seem to (re)negotiate U320 on all drives but avoids
it instead by letting us honor the BIOS settings. I'm sure this is not
quite right and will have to change again soon.
controller to get ready (65K x ISA access time, visually around 1 second).
If we have wait more than that amount it's likely that the hardware is a
legacy-free one and simply doesn't have keyboard controller and doesn't
require enabling A20 at all.
This makes cdboot working for MacBook Pro with Boot Camp.
MFC after: 1 day
doesn't appear to be protecting anything. Most of consumers funsetownlst(9)
do not appear to be picking up Giant anywhere. This was originally a part
of my Giant exit(2) clean up revision 1.272 but I thought it was a good idea
to leave it out until we were able to analyze it better.
Tested by: kris
MFC after: 3 weeks
which means that devices will be destroyed on last close.
This fixes destruction order problems when, eg. RAID3 array is build on
top of RAID1 arrays.
Requested, reviewed and tested by: ru
MFC after: 2 weeks
o Implement the remove verb to remove a partition entry.
o Improve error reporting by first checking that the verb is valid.
o Add an entry parameter to the add verb. this parameter can be
both read-only as welll as read-write and specifies the entry
number of the newly added partition.
o Make sure that the provider is alive when passed to us. It may
be withering away.
o When adding a new partition entry, test for overlaps with existing
partitions.
particular provider. Use this function where g_orphan_provider()
is being called so that the flags are updated correctly and
g_orphan_provider() is called only when allowed.
Radeon memmap code, which with a new DDX driver and DRI drivers should fix
long-term stability issues with Radeons. Also adds support for r200's
ATI_fragment_shader, r300 texrect support and texture caching fixes, i915
vblank support and bugfixes, and new PCI IDs.
net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with
the same sequence number. This allows to verify if the other side
has proper replay attacks detection.
net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with
corrupted HMAC. This allows to verify if the other side properly
detects modified packets.
I used the first one to discover that we don't have proper replay attacks
detection in ESP (in fast_ipsec(4)).
natm_usr_detach(), which actually does the right thing. This code has
never worked properly, but also was never invoked since we only abort
connections associated with listen sockets, and netnam doesn't support
listen sockets.
MFC after: 3 months
reference. For now, we allow the possibility that the in_ppcb
pointer in the inpcb may be NULL if a timewait socket has had its
tcptw structure recycled. This allows tcp_timewait() to
consistently unlock the inpcb.
Reported by: Kazuaki Oda <kaakun at highway dot ne dot jp>
MFC after: 3 months
as being undocumented in Stevens, and was broken in 1997 during network
stack infrastructure work. It is the one remaining (and incorrect)
direct protocol reference to raw_usrreq.pru_attach; this is incorrect
because the raw socket code assumes that raw_uattach is called only after
the protocol has allocated a PCB.
MFC after: 3 months
protocols invoke after allocating a PCB, so so_pcb should be non-NULL.
It is only used by the two IPSEC implementations, so I didn't hit it in
my testing.
Reported by: pjd
MFC after: 3 months
The real problem was that ioctl handlers needed to call amr_wait_command()
with the list lock held. This not only solves the completion race, it also
prevents bounce buffer corruption that could arise from amr_start() being
called without the proper locks held.
Discussed with: ps
MFC After: 3 days
the completion of the command can occur before tsleep is called and
the command ends up blocking forever since the wakeup has already
been called.
Submitted by: ups
error on the request. Add a wrapper, gctl_set_param_err(), that
sets the error on the request from the error returned by
gctl_set_param() and update current callers of gctl_set_param()
to call gctl_set_param_err() instead.
This makes gctl_set_param() much more usable in situations where
the caller knows better what to do with certain (apparent) error
conditions and setting an error on the request is not one of the
things that need to be done.
credential: mac_associate_nfsd_label()
This entry point can be utilized by various Mandatory Access Control policies
so they can properly initialize the label of files which get created
as a result of an NFS operation. This work will be useful for fixing kernel
panics associated with accessing un-initialized or invalid vnode labels.
The implementation of these entry points will come shortly.
Obtained from: TrustedBSD
Requested by: mdodd
MFC after: 3 weeks
(tcp_sack_output_debug checks cached hints aginst computed values by walking the
scoreboard and reports discrepancies). The sack hinting code has been stable for
many months now so it is time for the debug code to go. Leaving tcp_sack_output_debug
ifdef'ed out in case we need to resurrect it at a later point.
earlier in cpu_setregs().
- If we know this CPU has a FPU via cpuid, then just assume the INT16
interface and make the npx device quiet to not clutter the dmesg. This
is true for all Pentium and later CPUs and even some of the later 486dx
CPUs.
Reviewed by: bde
Tested by: ps
MFC after: 1 week
