- Use ustringp for the location of the argv and environment strings
and allow destp to travel further down the stack for the stackgap
and auxv regions.
- Update the Linux copyout_strings variants to move destp down the
stack as was done for the native ABIs in r263349.
- Stop allocating a space for a stack gap in the Linux ABIs. This
used to hold translated system call arguments, but hasn't been used
since r159992.
Reviewed by: kib
Tested on: md64 (amd64, i386, linux64), i386 (i386, linux)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22501
the vnode, logical block number, and size of data block that is
being requested. They then use the VOP_BMAP function to calculate
the mapping from logical block number to physical block number from
which to access the data. This change expands the interface to also
pass the physical block number in cases where the VOP_MAP function
may no longer work, for example when a file is being truncated.
No functional change.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
Generally, it's preferred that an application fork/setsid if it doesn't want
to keep its controlling TTY, but it could be that a debugger is trying to
steal it instead -- so it would hook in, drop the controlling TTY, then do
some magic to set things up again. In this case, TIOCNOTTY is quite handy
and still respected by at least OpenBSD, NetBSD, and Linux as far as I can
tell.
I've dropped the note about obsoletion, as I intend to support TIOCNOTTY as
long as it doesn't impose a major burden.
Reviewed by: bcr (manpages), kib
Differential Revision: https://reviews.freebsd.org/D22572
The previously used quiesce_all_cpus walks all CPUs and waits until curthread
can run on them. Even on contemporary machines this becomes a significant
problem under load when it can literally take minutes for the operation to
complete. With the patch the stall is normally less than 1 second.
Reviewed by: kib, jeff (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21740
A variant of this facility was already used by rmlocks where IPIs would
enforce ordering.
This allows to elide fences where they are rarely needed and the cost of
IPI (should it be necessary) is cheaper.
Reviewed by: kib, jeff (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21740
This allows bumping threadcount without taking the global devmtx lock.
In particular this eliminates contention on said lock while using bhyve
with multiple vms.
Reviewed by: kib
Tested by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22548
We already assert the lock is held later during tty_rel_free(), but it is
arguably good form to clarify locking expectations here as well at the
top-level that other drivers use.
vn_open_cred() assumes that it is called from the top-level of a VFS
syscall. Writers must call bwillwrite() before locking any VFS
resource to wait for cleanup of dirty buffers.
ZFS getextattr() and setextattr() VOPs do call vn_open_cred(), which
results in wait for unrelated buffers while owning ZFS vnode lock (and
ZFS does not use buffer cache). VN_OPEN_INVFS allows caller to skip
bwillwrite.
Note that ZFS is still incorrect there, because it starts write on an
mp and locks a vnode while holding another vnode lock.
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The use of the uma trash procedures is automatic, there's no need to
pass them explicitly here.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22582
tty_pts.c relies on sys/tty.h for sys/mutex.h. Include it directly instead
of relying on this pollution to ease the diff for anyone that wants to try
converting the tty lock to anything other than a mutex.
union members in vm_page.h to store the zone and slab. Remove some nearby
dead code.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D22564
There are two classes of rm lock, one "sleepable" and one not. But even
a "sleepable" rm lock is only sleepable in write mode, and is
non-sleepable when taken in read mode.
Warn about sleepable rm locks in read mode as non-sleepable locks. Do
this by defining a new lock operation flag, LOP_NOSLEEP, to indicate
that a lock is non-sleepable despite what the LO_SLEEPABLE flag would
indicate, and defining a new witness lock instance flag, LI_SLEEPABLE,
to track the product of LO_SLEEPABLE and LOP_NOSLEEP on the lock
instance.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22527
. entries are never created and .. can reuse existing entries,
meaning the early count bump is both spurious and leading to
overcounting in certain cases.
The debugger like truss(1) depends on the wait(2) syscall. This syscall
waits for ALL children. When it is waiting for ALL child's the children
created by process descriptors are not returned. This behavior was
introduced because we want to implement libraries which may pdfork(1).
The behavior of process descriptor brakes truss(1) because it will
not be able to collect the status of processes with process descriptors.
To address this problem the status is returned to parent when the
child is traced. While the process is traced the debugger is the new parent.
In case the original parent and debugger are the same process it means the
debugger explicitly used pdfork() to create the child. In that case the debugger
should be using kqueue()/pdwait() instead of wait().
Add test case to verify that. The test case was implemented by markj@.
Reviewed by: kib, markj
Discussed with: jhb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20362
Several sysctl sysctls output to a user buffer while holding a
non-sleepable lock that protects the sysctl topology. They need to wire
the output buffer, or else they may try to sleep on a page fault.
Reviewed by: cem, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22528
Record as much bits from curthread into busy_lock as fits. Low bits
for struct thread * representation are zero due to struct and zone
alignment, and they leave space for busy flags (perhaps except
statically allocated thread0). Upper bits are not very interesting
for assert, and in most practical situations recorded value should
allow to manually identify the owner with certainity.
Assert that unbusy is performed by the owner, except few places where
unbusy is done in io completion handler. For this case, add
_unchecked variants of asserts and unbusy primitives.
Reviewed by: markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22298
Add a warning when a device registers with devfs and requests
D_NEEDGIANT. The warning says the device will go away before
13.0. This is needed to flush out the devices in the tree that are
still Giant locked. This warning, or some variant of it, should have
gone into the tree a long time ago...
The intention is to require all devices be converted to not use
automatic giant in this way, or remove any such devices that remain
that we don't have the hardware to test a conversion of.
kbd so far is the only device that can't leave the tree, yet needs
something sensible done to avoid the auto giant lock (even if it is
just doing the wrapping itself). There may be others added to this
list... Any discussions of this topic will take place on arch@.
Add explicit SI_SUB_EPOCH, after SI_SUB_TASKQ and before SI_SUB_SMP
(EARLY_AP_STARTUP). Rename existing "SI_SUB_TASKQ + 1" to SI_SUB_EPOCH.
epoch(9) consumers cannot epoch_alloc() before SI_SUB_EPOCH:SI_ORDER_SECOND,
but likely should allocate before SI_SUB_SMP. Prior to this change,
consumers (well, epoch itself, and net/if.c) just open-coded the
SI_SUB_TASKQ + 1 order to match epoch.c, but this was fragile.
Reviewed by: mmacy
Differential Revision: https://reviews.freebsd.org/D22503
Arm64 doesn't define the bus_space_set_multi_stream and
bus_space_set_region_stream functions. Don't try to define them there.
Sponsored by: DARPA, AFRL
Update the NetBSD Kernel Concurrency Sanitizer (KCSAN) runtime to work in
the FreeBSD kernel. It is a useful tool for finding data races between
threads executing on different CPUs.
This can be enabled by enabling KCSAN in the kernel config, or by using the
GENERIC-KCSAN amd64 kernel. It works on amd64 and arm64, however the later
needs a compiler change to allow -fsanitize=thread that KCSAN uses.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22315
KCSAN is a tool to find concurrent memory access that may race each other.
After a determined number of memory accesses a cell is created, this
describes the current access. It will then delay for a short period
to allow other CPUs a chance to race. If another CPU performs a memory
access to an overlapping region during this delay the race is reported.
This is a straight import of the NetBSD code, it will be adapted to
FreeBSD in a future commit.
Sponsored by: DARPA, AFRL
Currently si_usecount is effectively a sum of usecounts from all associated
vnodes. This is maintained by special-casing for VCHR every time usecount is
modified. Apart from complicating the code a little bit, it has a scalability
impact since it forces a read from a cacheline shared with said count.
There are no consumers of the feature in the ports tree. In head there are only
2: revoke and devfs_close. Both can get away with a weaker requirement than the
exact usecount, namely just the count of active vnodes. Changing the meaning to
the latter means we only need to modify it on 0<->1 transitions, avoiding the
check plenty of times (and entirely in something like vrefact).
Reviewed by: kib, jeff
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22202
reudundant complicated checks and additional locking required only for
anonymous memory. Introduce vm_object_allocate_anon() to create these
objects. DEFAULT and SWAP objects now have the correct settings for
non-anonymous consumers and so individual consumers need not modify the
default flags to create super-pages and avoid ONEMAPPING/NOSPLIT.
Reviewed by: alc, dougm, kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22119
The lua-based makesyscalls produces slightly different output than its
makesyscalls.sh predecessor, all whitespace differences more closely
matching the source syscalls.master.
flua is bootstrapped as part of the build for those on older
versions/revisions that don't yet have flua installed. Once upgraded past
r354833, "make sysent" will again naturally work as expected.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21894
Co-mingling two things here:
* Addressing some feedback from Konstantin and Kyle re: jail,
capability mode, and a few other things
* Adding audit support as promised.
The audit support change includes a partial refresh of OpenBSM from
upstream, where the change to add shm_rename has already been
accepted. Matthew doesn't plan to work on refreshing anything else to
support audit for those new event types.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: kib
Relnotes: Yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22083
Zeroing of them is needed so that an image activator can update the
values as appropriate (or not set at all).
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22379
knobs and indicators for code that mitigates functional and security issues
in the architecture/platform. Controls for regular operational policy should
still go into places security, hw, kern, etc.
The machdep root node is inherently architecture dependent, but mitigations
tend to be architecture dependent as well. Some cases like Spectre do cross
architectural boundaries, but the mitigation code for them tends to be
architecture dependent anyways, and multiple architectures won't be active
in the same image of the kernel.
Many mitigation knobs already exist in the system, and they will be moved
with compat naming in the future. Going forward, mitigations should collect
in machdep.mitigations.
Reviewed by: imp, brooks, rwatson, emaste, jhb
Sponsored by: Intel
Change the FreeBSD ELF ABIs to use this new hook to copyout ELF auxv
instead of doing it in the sv_fixup hook. In particular, this new
hook allows the stack space to be allocated at the same time the auxv
values are copied out to userland. This allows us to avoid wasting
space for unused auxv entries as well as not having to recalculate
where the auxv vector is by walking back up over the argv and
environment vectors.
Reviewed by: brooks, emaste
Tested on: amd64 (amd64 and i386 binaries), i386, mips, mips64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22355
Pointer arguments should be of the form "<type> *..." and not "<type>* ...".
No functional change.
Reviewed by: kevans
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22373
Suppose a writing thread has pinned its pages and gone to sleep with
pipe_map.cnt > 0. Suppose that the thread is woken up by a signal (so
error != 0) and the other end of the pipe has simultaneously been
closed. In this case, to satisfy the assertion about pipe_map.cnt in
pipe_destroy_write_buffer(), we must mark the buffer as empty.
Reported by: syzbot+5cce271bf2cb1b1e1876@syzkaller.appspotmail.com
Reviewed by: kib
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22261
