probes declared in a kernel module when that module is unloaded. In
particular,
* Unloading a module with active SDT probes will cause a panic. [1]
* A module's (FBT/SDT) probes aren't destroyed when the module is unloaded;
trying to use them after the fact will generally cause a panic.
This change fixes both problems by porting the DTrace module load/unload
handlers from illumos and registering them with the corresponding
EVENTHANDLER(9) handlers. This allows the DTrace framework to destroy all
probes defined in a module when that module is unloaded, and to prevent a
module unload from proceeding if some of its probes are active. The latter
problem has already been fixed for FBT probes by checking lf->nenabled in
kern_kldunload(), but moving the check into the DTrace framework generalizes
it to all kernel providers and also fixes a race in the current
implementation (since a probe may be activated between the check and the
call to linker_file_unload()).
Additionally, the SDT implementation has been reworked to define SDT
providers/probes/argtypes in linker sets rather than using SYSINIT/SYSUNINIT
to create and destroy SDT probes when a module is loaded or unloaded. This
simplifies things quite a bit since it means that pretty much all of the SDT
code can live in sdt.ko, and since it becomes easier to integrate SDT with
the DTrace framework. Furthermore, this allows FreeBSD to be quite flexible
in that SDT providers spanning multiple modules can be created on the fly
when a module is loaded; at the moment it looks like illumos' SDT
implementation requires all SDT probes to be statically defined in a single
kernel table.
PR: 166927, 166926, 166928
Reported by: davide [1]
Reviewed by: avg, trociny (earlier version)
MFC after: 1 month
In the future, we'll need to come up with new proc_*() functions that accept
locked processes. For now, this prevents postgresql + DTrace from crashing the
system.
MFC after: 1 month
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
Illumos ZFS issues:
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if
physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Fix a regression introduced by fix for Illumos bug #3834. Quote from
Matthew Ahrens on the Illumos issue:
ztest fails this assertion because ztest_dmu_read_write() does
dmu_tx_hold_free(tx, bigobj, bigoff, bigsize);
and then
dmu_object_set_checksum(os, bigobj,
(enum zio_checksum)ztest_random_dsl_prop(ZFS_PROP_CHECKSUM), tx);
If the region to free is past the end of the file, the DMU assumes that there
will be nothing to do for this object. However, ztest does set_checksum(),
which must modify the dnode. The fix is for ztest to also call
dmu_tx_hold_bonus(tx, bigobj);
so we can account for the dirty data associated with setting the checksum
Illumos ZFS issues:
3955 ztest failure: assertion refcount_count(&tx->tx_space_written)
+ delta <= tx->tx_space_towrite
Merge vendor bugfix for ZFS test suite that triggers false positives.
Illumos ZFS issues:
3949 ztest fault injection should avoid resilvering devices
3950 ztest: deadman fires when we're doing a scan
3951 ztest hang when running dedup test
3952 ztest: ztest_reguid test and ztest_fault_inject don't place nice together
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
Do this by forcing inclusion of
sys/cddl/compat/opensolaris/sys/debug_compat.h
via -include option into all source files from OpenSolaris.
Note that this -include option must always be after -include opt_global.h.
Additionally, remove forced definition of DEBUG for some modules and fix
their build without DEBUG.
Also, meaning of DEBUG was overloaded to enable WITNESS support for some
OpenSolaris (primarily ZFS) locks. Now this overloading is removed and
that use of DEBUG is replaced with a new option OPENSOLARIS_WITNESS.
MFC after: 17 days
Before executing any subcommand, zpool tool fetches pools configuration from
the kernel. Before features support was added, kernel was regenerating that
configuration based on data always present in memory. Unfortunately, pool
features list and activity counters are not such. They are stored in ZAP,
that normally resides in ARC, but under heavy memory pressure may be swapped
out. If pool is suspended at this point, there is no way to recover it back
since any zpool command will stuck.
This change has one predictable flaw: `zpool upgrade` always wish to upgrade
suspended pools, but fortunately it can't do it due to the suspension.
disable TRIM otherwise.
r252840 (illumos bug 3836) is based on assumption that zio_free_sync() has
no lock dependencies and should complete immediately. Unfortunately, with our
TRIM implementation that is not true due to ZIO_STAGE_VDEV_IO_START added
to the ZIO_FREE_PIPELINE, which, while not really accessing devices, still
acquires SCL_ZIO lock for read to be sure devices won't disappear.
When TRIM is disabled, this patch enables direct free execution from r252840
and removes ZIO_STAGE_VDEV_IO_START and ZIO_STAGE_VDEV_IO_ASSESS stages from
the pipeline to avoid lock acquisition. Otherwise it queues free request as
it was before r252840.
Existing async thread is running only on successfull spa_sync() completion,
that is impossible in case of pool loosing required (last) disk(s). That
indefinite delay of SPA_ASYNC_REMOVE processing made ZFS to not close the
lost disks, preventing GEOM/CAM from destroying devices and reusing names
on later disk reattach.
In earlier version of the patch I've tried to just run existing thread
immediately, unrelated to spa_sync() completion, but that exposed number
of situations where it could stuck due to locks held by stuck spa_sync(),
that are required for other kinds of async events.
Experiments with OpenIndiana snapshot confirmed that they also have this
issue with lost disks reattach.
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.
Before this patch is reinserted we need to break this ordering.
Sponsored by: EMC / Isilon storage division
Reported by: kib
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages
Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).
After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).
Fixing such primitive can bring to complete removal of the page hold
mechanism.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho
Skip eviction step of processing free records when doing ZFS
receive to avoid the expensive search operation of non-existent
dbufs in dn_dbufs.
Illumos ZFS issues:
3834 incremental replication of 'holey' file systems is slow
MFC after: 2 weeks
To quote Illumos issue #3888:
When 'zfs recv -F' is used with an incremental recv it rolls
back any changes made since the last snapshot in case new
changes were made to the file system while the recv is in
progress (without -F the recv would fail when it does it's
final check to commit the recv-ed data as the recv-ed data
conflicts with the newly written data).
However, if there is a snapshot taken after the recv began
rolling back to the 'latest' snapshot will not help and the
recv will still fail. 'zfs recv -F' should be extended to
destroy any snapshots created since the source snapshot when
finishing the recv (effectively rolling back through all
snapshots, instead of just to the latest snapshot).
Illumos ZFS issues:
3888 zfs recv -F should destroy any snapshots created since the
incremental source
MFC after: 2 weeks
To quote Illumos #3875:
The problem here is that if we ever end up in the error
path, we drop the locks protecting access to the zfsvfs_t
prior to forcibly unmounting the filesystem. Because z_os
is NULL, any thread that had already picked up the zfsvfs_t
and was sitting in ZFS_ENTER() when we dropped our locks
in zfs_resume_fs() will now acquire the lock, attempt to
use z_os, and panic.
Illumos ZFS issues:
3875 panic in zfs_root() after failed rollback
MFC after: 2 weeks
existed before IOCTL code refactoring merged change 4445fffb from illumos
at r248571.
This change allows `zpool clear` to be used again to recover suspended pool.
It seems the only was supposed by the code to restore pool operation after
reconnecting lost disks that were required for data completeness. There
are still cases where `zpool clear` command can just safely stuck due to
deadlocks inside ZFS kernel part, but probably that is better then having
no chances to recover at all.
OpenSolaris version is:
13108:33bb8a0301ab
6762020 Disassembly support for Intel Advanced Vector Extensions (AVX)
This corresponds to Illumos-gate (github) version
ab47273fedff893c8ae22ec39ffc666d4fa6fc8b
MFC after: 3 weeks
- move init and fini code into separate functions (like it is done upstream)
- invoke fini code via shutdown_post_sync event hook
This should make zfs close its underlying devices during shutdown,
which may be important for their drivers.
MFC after: 20 days
All other places where a znode is allocated do not need z_vnode at all.
These are:
- zfs_create_share_dir
- zfs_create_fs
This chnage ensures two things:
- VN_LOCK_ASHARE is not erroneously called for VFIFO vnodes
- vn_lock is called on a fully constructed vnode with correct v_ops
The change also allows to make zfs_znode_cache_constructor a normal
kmem_cache constructor again (as it is in upstream).
This allows to avoid a problem where zfs_znode_cache_destructor
may be called on un-constructed znodes.
MFC after: 17 days
Unconditionally freeing a page is not good, especially if it is the page
that was wired by the caller. The checks are picked up from
kern_sendfile.
MFC after: 3 weeks
Quoting illumos issue #3836:
Currently zio_free() always puts the zio on a list for subsequent
processing by zio_free_sync(). This is only necessary for frees that
might need to issue reads (gang and dedup blocks).
By processing the majority of the frees as we encounter them, we reduce
the amount of time that the spa_sync() thread spends burning CPU and
not doing any i/o, thus increasing the overall write throughput of the
system.
Illumos ZFS issues:
3836 zio_free() can be processed immediately in the common case
MFC after: 1 week
I missed to register zfs_ioc_jail and zfs_ioc_unjail as legacy ioctl's
with the new zfs_ioctl_register_legacy() function.
These operations do not modify pools or datasets so there is no need to
log them to pool history.
Reported by: Alexander Leidinger <ale@FreeBSD.org> and others on current@
MFC after: 3 days
This could happen if a thread doing a page-in loses a ZFS range lock
race to a thread writing to the same range
This fixes "panic: vm_page_alloc: pindex already allocated" in
http://docs.FreeBSD.org/cgi/mid.cgi?1372165971.96049.42.camel
Submitted by: avg
MFC after: 1 week
function name of its corresponding DTrace probes. These descriptions may
contain whitespace, but probe names cannot, so just replace any whitespace
with underscores when creating probes.
MFC after: 1 week
Restore a previous behavior before r251646, where when destructing
ZFS snapshot, the ioctl would return ENOENT when it hit any of
them in the errlist (the new behavior was only return ENOENT when
all returns error).
Illumos ZFS issues:
3829 fix for 3740 changed behavior of zfs destroy/hold/release ioctl
MFC after: 1 week
ZFS event processing should work on R/O root filesystems
Illumos ZFS issues:
3749 zfs event processing should work on R/O root filesystems
MFC after: 2 weeks
