VF devices use a different register layout than PF devices. Storing
the offset in a value in the softc allows code to be shared between the
PF and VF drivers.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7389
related to "shared" CPLs.
a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single
function. Allow callers to direct the response to any iq. Tidy up
set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of
magic constants.
b) Remove all CPL handler tables from struct adapter. This reduces its
size by around 2KB. All handlers are now registered at MOD_LOAD instead
of attach or some kind of initialization/activation. The registration
functions do not need an adapter parameter any more.
c) Add per-iq handlers to deal with CPLs whose destination cannot be
determined solely from the opcode. There are 2 such CPLs in use right
now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send
filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq.
t4_tom (including the DDP code) now uses the port's ctrlq to send
L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq.
fwq and ofld_rxq have different handlers that know what kind of tid to
expect in the reply. Update t4_write_l2e and callers to to support any
wrq/iq combination.
Approved by: re@ (kib@)
Sponsored by: Chelsio Communications
Release the hold on ep->com immediately after sending the RST. This
fixes a bug that sometimes leaves userspace iWARP tools hung when the
user presses ^C.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Approved by: re (gjb@)
Sponsored by: Chelsio Communications
comp_handler_lock but c4iw_destroy_cq has already freed the CQ memory
(which is where the lock resides).
Submitted by: Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
If the parent is DEAD or connect_request_upcall() fails, the parent
mutex is left locked. This leads to a hang when process_mpa_request()
is called again for another child of the listening endpoint.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Obtained from: upstream iw_cxgb4
Sponsored by: Chelsio Communications
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Other structures needed by prototypes in t4_tom.h are explicitly
declared in this file, so adding the prototype here seems most
consistent with existing code.
Move the code that reads all the parameters to t4_init_sge_params in the
shared code. Use these per-adapter values instead of globals.
Sponsored by: Chelsio Communications
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
a) Look for the CPL in the payload buffer instead of the descriptor.
b) Retrieve the socket associated with the tid with the inpcb lock held.
Submitted by: Krishnamraju Eraparaju @ Chelsio
The fd is closed later in this case. This fixes a "SS_NOFDREF on enter"
panic.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
Each virtual interface has its own MAC address, queues, and statistics.
The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented
as additional VIs on each port. This change allows additional non-netmap
interfaces to be configured on each port. Additional virtual interfaces
use the naming scheme vcxgbeX or vcxlX.
Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a
value greater than 1 before loading the cxgbe(4) or cxl(4) driver.
NB: The first VI on each port is the "main" interface (cxgbeX or cxlX).
T4/T5 NICs provide a limited number of MAC addresses for each physical port.
As a result, a maximum of six VIs can be configured on each port (including
the "main" interface and the netmap interface when netmap is enabled).
One user-visible result is that when netmap is enabled, packets received
or transmitted via the netmap interface are no longer counted in the stats
for the "main" interface, but are not accounted to the netmap interface.
The netmap interfaces now also have a new-bus device and export various
information sysctl nodes via dev.n(cxgbe|cxl).X.
The cxgbetool 'clearstats' command clears the stats for all VIs on the
specified port along with the port's stats. There is currently no way to
clear the stats of an individual VI.
Reviewed by: np
MFC after: 1 month
Sponsored by: Chelsio
- Define the kref structure identical to the one found in Linux.
- Update clients referring inside the kref structure.
- Implement kref_sub() for FreeBSD.
Reviewed by: np @
Sponsored by: Mellanox Technologies
This is roughly the iw_cxgbe equivalent of
be13b2dff8
-----------------
RDMA/cxgb4: Connect_request_upcall fixes
When processing an MPA Start Request, if the listening endpoint is
DEAD, then abort the connection.
If the IWCM returns an error, then we must abort the connection and
release resources. Also abort_connection() should not post a CLOSE
event, so clean that up too.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
-----------------
Submitted by: Krishnamraju Eraparaju at chelsio dot com.
Highlights:
- Multiple verbs API updates
- Support for RoCE, RDMA over ethernet
All hardware drivers depending on the common infiniband stack has been
updated aswell.
Discussed with: np @
Sponsored by: Mellanox Technologies
MFC after: 1 month
Drivers (ULDs) and the base if_cxgbe driver.
Track the per-adapter activation of ULDs in a new "active_ulds" field.
This was done pretty arbitrarily before this change -- via TOM_INIT_DONE
in adapter->flags for TOM, and the (1 << MAX_NPORTS) bit in
adapter->offload_map for iWARP.
iWARP and hw-accelerated iSCSI rely on the TOE (supported by the TOM
ULD). The rules are:
a) If the iWARP and/or iSCSI ULDs are available when TOE is enabled then
iWARP and/or iSCSI are enabled too.
b) When the iWARP and iSCSI modules are loaded they go looking for
adapters with TOE enabled and enable themselves on that adapter.
c) You cannot deactivate or unload the TOM module from underneath iWARP
or iSCSI. Any such attempt will fail with EBUSY.
MFC after: 2 weeks
"MODULE_VERSION" macro definition. Remove the redefinition of the
"MODULE_VERSION" macro from the Linux kernel compatibility API.
MFC after: 1 month
Reported by: np@
Sponsored by: Mellanox Technologies
sb_cc member of struct sockbuf to a couple of inline functions:
sbavail() and sbused()
Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Free rt in c4iw_connect only if it is allocated.
- Call soclose instead of so_shutdown if there is an abort from the peer.
- Close socket and return failure if TOE is not enabled.
Submitted by: Hariprasad at Chelsio dot com
Sponsored by: Chelsio Communications
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
MFC after: 1 week
Sponsored by: Mellanox Technologies
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
