* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
this isn't freebsd specific anymore.
* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
MAX_CHAINS around so it can be used in the right spot.
* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.
* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.
Tested:
* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode
TODO:
* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
at that point.
Note:
* This breaks the driver and ifconfig ABI; please recompile the kernel,
ifconfig and wpa_supplicant/hostapd.
Right now the noexec mount option disallows image activators to try
execve the files on the mount point. Also, after r127187, noexec
also limits max_prot map entries permissions for mappings of files
from such mounts, but not the actual mapping permissions.
As result, the API behaviour is inconsistent. The files from noexec
mount can be mapped with PROT_EXEC, but if mprotect(2) drops execution
permission, it cannot be re-enabled later. Make this consistent
logically and aligned with behaviour of other systems, by disallowing
PROT_EXEC for mmap(2).
Note that this change only ensures aligned results from mmap(2) and
mprotect(2), it does not prevent actual code execution from files
coming from noexec mount. Such files can always be read into
anonymous executable memory and executed from there.
Reported by: shamaz.mazum@gmail.com
PR: 217062
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The PBKDF2 in sys/geom/eli/pkcs5v2.c is around half the speed it could be
GELI's PBKDF2 uses a simple benchmark to determine a number of iterations
that will takes approximately 2 seconds. The security provided is actually
half what is expected, because an attacker could use the optimized
algorithm to brute force the key in half the expected time.
With this change, all newly generated GELI keys will be approximately 2x
as strong. Previously generated keys will talk half as long to calculate,
resulting in faster mounting of encrypted volumes. Users may choose to
rekey, to generate a new key with the larger default number of iterations
using the geli(8) setkey command.
Security of existing data is not compromised, as ~1 second per brute force
attempt is still a very high threshold.
PR: 202365
Original Research: https://jbp.io/2015/08/11/pbkdf2-performance-matters/
Submitted by: Joe Pixton <jpixton@gmail.com> (Original Version), jmg (Later Version)
Reviewed by: ed, pjd, delphij
Approved by: secteam, pjd (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8236
for USB OTG-capable hardware to implement device side of USB
Mass Storage, ie pretend it's a flash drive. It's configured
in the same way as other CTL frontends, using ctladm(8)
or ctld(8). Differently from usfs(4), all the configuration
can be done without rebuilding the kernel.
Testing and review is welcome. Right now I'm still moving,
and I don't have access to my test environment, so I'm somewhat
reluctant to making larger changes to this code; on the other
hand I don't want to let it sit on Phab until my testing setup
is back, because I want to get it into 11.1-RELEASE.
Reviewed by: emaste (cursory), wblock (man page)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8787
parameter to mmap(2), even if MAP_FIXED is not explicitly specified.
Android ART is one example. Implement bug compatibility for this case
in linuxulator.
Reviewed by: dchagin@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9373
Since fcmpset can fail without lock contention e.g. on arm, it was possible
to get spurious failures when the caller was expecting the primitive to succeed.
Reported by: mmel
called for all threads belonging to a procedure. Currently the first
thread in a procedure is kept around as an optimisation step and is
never freed. Because the first thread in a procedure is never freed
nor allocated, its destructor and constructor callbacks are never
called which means per thread structures allocated by dtrace and the
Linux emulation layers for example, might be present for threads which
don't need these structures.
This patch adds a thread construction and destruction call for the
first thread in a procedure.
Tested: dtrace, linux emulation
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
All resources lack of which may put CTIO into the queue are either
per-channel or potentially per-queue, but none of them are per-LUN.
This is a first step to fix live LUN disabling. Before this change
any CTIOs held in a queue in time of disabling were just leaked.
MFC after: 2 weeks
Do no write to PBA register on igb(4) devices unless we need
to make adjustments for the 82575 and jumbo frames.
Remove redundant LPE/~LPE assignments.
Move e1000_lv_jumbo_workaround_ich8lan() invokcation into a block
so that its not executed in the igb case.
Move em(4) class assignments of RCTL values to its own code block.
Adjust a few direct accesses of ifp->mtu to use accessor functions.
PR: 216734
Submitted by: Kaho Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>
Use large enough type for calculation of mtrr physmask. Typical
cpu_maxphyaddr is 36 or larger.
Reported and tested by: sbruno
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
For the loop that dirties vm_pages in case superpage was written to,
check the complete condition before the loop.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Implement get_pcpu() for amd64/sparc64/mips/powerpc, and use it to
replace pcpu_find(curcpu) in MI code.
Reviewed by: andreast, kan, lidl
Tested by: lidl(mips, sparc64), andreast(powerpc)
Differential Revision: https://reviews.freebsd.org/D9587
In case when decrypted and decapsulated packet is an UDP datagram,
check that its checksum is not zero before doing incremental checksum
adjustment.
Reported by: Eugene Grosbein
Tested by: Eugene Grosbein
Convert linux_recv(), linux_send() and linux_accept() system call arguments
to the register_t type too.
PR: 217161
MFC after: 3 days
xMFC with: r313284,r313285,r313684
Before this change XCOPY code could allocate memory in chunks up to 16-32MB
(VMware does XCOPY in 4MB chunks by default), that could be difficult for
VM subsystem to do due to KVA fragmentation, that sometimes created huge
allocation delays, blocking any I/O for respective LU for that time.
This change limits allocations down to TPC_MAX_IO_SIZE, which is 1MB now.
1MB is also not a cookie, but ZFS also can do that for large blocks, so
it should be less dramatic. As drawback this increases CPU overhead, but
it still look acceptable comparing to time consumed by ZFS read/write.
MFC after: 1 week
and there is no reason to check cpu family or vendor.
Noted by: royger
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9657
code. Also fix cast and remove unneeded XXX in comment.
Noted and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9657
The namespace in this file really needs cleaning up. In the meantime
let inline primitives be defined as long as LOCK_DEBUG is not enabled.
Reported by: kib
sys/cam/ctl/ctl.c:
In ctl_datamove(), inside CTL_IO_DELAY, add a lun variable and fill
it in before trying to dereference it.
MFC after: 3 days
Sponsored by: Spectra Logic
This patch will add support for MacBookPro 11.2.
For the macros, the MBP11_* macros (for the existing MacBookPro11.3) did not
match so they have been renamed to MBP113_* and a new MBP112_* has been
added (modified copy of MBP11_*).
Some trailing whitespaces may have been removed automatically.
PR: kern/214836
Obtained from: Johannes Lundberg <johannes@brilliantservice.co.jp
7504 kmem_reap hangs spa_sync and administrative tasks
illumos/illumos-gate@405a5a0f5chttps://github.com/illumos/illumos-gate/commit/405a5a0f5c3ab36cb76559467d1a62ba648bd80https://www.illumos.org/issues/7504
We see long spa_sync(). We are waiting to hold dp_config_rwlock for writer. Some
other thread holds dp_config_rwlock for reader, then calls arc_get_data_buf(),
which finds that arc_is_overflowing()==B_TRUE. So it waits (while holding
dp_config_rwlock for reader) for arc_reclaim_thread to signal arc_reclaim_waiters_cv.
Before signaling, arc_reclaim_thread does arc_kmem_reap_now(), which takes ~seconds.
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
