the work area was totally unsynchronized which means this driver only
had a chance of working on x86 when no bounce buffers were involved,
which isn't that likely given that support for 64-bit DMA is currently
broken throughout ata(4).
- Add necessary little-endian conversion of accesses to the work area,
making this driver work on big-endian hosts. While at it, use the
alignment-agnostic byte order encoders in order to be on the safe side.
- Clear the reserved member of the SG list entries in order to be on the
safe side. [1]
Submitted by: yongari [1]
Reviewed by: yongari
Approved by: re (kib)
The elements in the component arrays may be direct Package objects rather
than references to objects. In that case, simply use the Package directly.
Approved by: re (kib)
- Split the logic to parse an SMAP entry out into a separate function on
amd64 similar to i386. This fixes a bug on amd64 where overlapping
entries would not cause the SMAP parsing to stop.
- Change the SMAP parsing code to do a sorted insertion into physmap[]
instead of an append to support systems with out-of-order SMAP entries.
Approved by: re (kib)
Don't reread the command register to see if enabling I/O or memory
decoding "took". Other OS's that I checked do not do this and it breaks
some amdpm(4) devices. Prior to 7.2 we did not honor the error returned
when this failed anyway, so this in effect restores previous behavior.
Approved by: re (kib)
cr_groups is no longer embedded in struct ucred and is instead stored
in a seperate array. As such we need to use kvm_read rather than bcopy
to populate the ki_groups field.
This fixes a crash when running ps -ax on a coredump.
Reported by: brucec
Tested by: brucec
MFC after: 3 days
Approved by: re@ (kib)
Allocate space for the group array in a static credential used in
the quota code. One case was correctly handled in r194498, but
this one was missed.
PR: kern/138657
Tested by: PR submitter
MFC after: 3 days
Approved by: re@ (kib)
The buffer returned by fgetln is not a "C" string and might not be NUL
terminated. Make sure that it is before using it.
Reviewed by: marck@
Approved by: re (kib)
Revision: 197322
Log:
Correct BIOS header sanitizing on pc98.
Revision: 197374
Log:
Disable a check on a disk size because it's too strict. This change is
to avoid using incorrect geometry.
It seems that this is the same problem in g_part_bsd_read()@g_part_bsd.c.
Reviewed by: rink
Approved by: re (kib)
Let fall down in the hard path (thus handling shared waiters wakeup
correctly) for the shared waiters also in the rwlock held in shared mode
as well, fixing possible deadlocks.
Please note that this is a special condition as we want this fix in
before RC2 as we assume it is critical and so it has been handled
as an instant-merge. For the STABLE_7 branch, 1 week before the MFC
is assumed.
Approved by: re (kib)
Re-remove the IBM0057 ID used for PS/2 mouse controllers. The asl for the
61p includes the hotkey device as IBM0068 and the mouse as IBM0057 similar
to other systems.
Approved by: re (kensmith)
- Update the list of known-working machines based on feedback for 7.2.
- Update the V440 entry regarding added support for the on-board NICs
in 8.0.
Approved by: re (kib), blackend
Make the sudden motion sensor work on older models and add a bit of
debugging.
Submitted by: Christoph Langguth <christoph at rosenkeller.org>
Approved by: re (kib)
A wrong variable is used when setting up the interface
address route, which broke source address selection in
some code paths.
Submitted by: noted by bz
Reviewed by: hrs
Approved by: re (kib)
Different sub-kinds of PCI buses may have different rules and
thus it is up for the bus backends to do proper input checks.
For example, PCIe allows configuration register numbers < 0x1000,
while for PCI proper the limit is 0x100.
And, in fact, the buses already do the checks.
Reviewed by: jhb
Approved by: re (kib)
Add a few SCSI controllers to GENERIC that can be found in Powermacs.
This allows installation onto SCSI disks as shipped, for example,
as an option with the Powermac G3.
PR: powerpc/138543
Reviewed by: grehan
Approved by: re (kib)
Obtained from: sparc64
Remove some debugging (KTR_VERBOSE) that crept into ppc GENERIC long ago
and is present on no other architectures by default.
Reviewed by: grehan
Approved by: re (kib)
Fix some instances where CAM rescans get hung up or take a long time to
complete.
Also, allow xpt_rescan() to rescan a LUN instead of a full bus.
Sponsored by: Copan Systems, Inc.
Approved by: re (kib)
Fixes to mcast userland API.
--
Fix an API issue in leave processing for IPv4 multicast groups.
* Do not assume that the group lookup performed by imo_match_group()
is valid when ifp is NULL in this case.
* Instead, return EADDRNOTAVAIL if the ifp cannot be resolved for the
membership we are being asked to leave.
Caveat user:
* The way IPv4 multicast memberships are implemented in the inpcb layer
at the moment, has the side-effect that struct ip_moptions will
still hold the membership, under the old ifp, until ip_freemoptions()
is called for the parent inpcb.
* The underlying issue is: the inpcb layer does not get notification
of ifp being detached going away in a thread-safe manner.
This is non-trivial to fix.
--
Fix an obvious logic error in the IPv4 multicast leave processing,
where the filter mode vector was not updated correctly after the leave.
--
Tighten input checking in inp_join_group():
* Don't try to use the source address, when its family is unspecified.
* If we get a join without a source, on an existing inclusive
mode group, this is an error, as it would change the filter mode.
Fix a problem with the handling of in_mfilter for new memberships:
* Do not rely on imf being NULL; it is explicitly initialized to a
non-NULL pointer when constructing a membership.
* Explicitly initialize *imf to EX mode when the source address
is unspecified.
This fixes a problem with in_mfilter slot recycling in the join path.
--
Don't allow joins w/o source on an existing group.
This is almost always pilot error.
We don't need to check for group filter UNDEFINED state at t1,
because we only ever allocate filters with their groups, so we
unconditionally reject such calls with EINVAL.
Trying to change the active filter mode w/o going through IP_MSFILTER
is also disallowed.
Deals with the case described in PR 137164 upfront, cumulative
with the fix in svn rev 197132 which only calls imo_match_source()
if the source address family was not unspecified.
--
Revision 197136 has a text conflict, however it is a comment only change.
PR: 137164, 138689, 138690, 138691
Submitted by: Stef Walter (with fixups)
Approved by: re (kib)
(incorrect handling of zero-length reads before the copy buffer is
allocated) is masked by the iso9660 taster. Tar and cpio both enable
that taster so were protected from the bug; unzip is susceptible.
This both fixes the bug and updates the test harness to exercise
this case.
Submitted by: Ed Schouten diagnosed the bug and drafted a patch
Approved by: re (kib)
- Prevent a panic on modern controllers by increasing CISS_MAX_PHYSTGT to 256
- Fix MSI and PERFORMANT interrupt programming. Fixes hang on boot.
- Fix locking bugs in ioctl handler
Most of this has been soaking at Yahoo for several months, if not longer. The
quick MFC is due to the impending 8.0-RC1 build.
Approved by: re
Obtained from: Yahoo!
Fix a bug reported by Daniel Mentz:
When authenticating DATA chunks some DATA chunks
might get stuck when the MTU gets decreased via
an ICMP message.
Approved by: re, rrs (mentor)
1) A lock issue, if we ever had to try again
we would double lock the INP lock.
2) We were allowing (at wrap) associd 0... which really
we cannot allow since 0 normally means in most socket
API calls that we are wishing to effect something on
the INP not TCB.
Approved by: re, rrs (mentor)
Calculate the amount of bytes to copy for select filedescriptor masks
taking into account size of fd_set for the current process ABI.
Approved by: re (kensmith)
Clean up Marvell platform code.
Introduce SheevaPlug support.
- The device is based on Marvell 88F6281 system on chip.
- More info about the platform at http://www.plugcomputer.org
- To build the FreeBSD kernel:
make buildkernel TARGET_ARCH=arm KERNCONF=SHEEVAPLUG
- Installation notes at: http://wiki.freebsd.org/FreeBSDMarvell
Submitted by: Michal Hajduk
Approved by: re (kib)
Obtained from: Semihalf
Self pointing routes are installed for configured interface addresses
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
Approved by: re
The bootp code installs an interface address and the nfs client
module tries to install the same address again. This extra code
is removed, which was discovered by the removal of a call to
in_ifscrub() in r196714. This call to in_ifscrub is put back here
because the SIOCAIFADDR command can be used to change the prefix
length of an existing alias.
r197235 reverts file nfs_vfsops.c
Reviewed by: kmacy
Approved by: re
This patch fixes the following issues:
- Routing messages are not generated when adding and removing
interface address aliases.
- Loopback route installed for an interface address alias is
not deleted from the routing table when that address alias
is removed from the associated interface.
- Function in_ifscrub() is called extraneously.
Reviewed by: gnn, kmacy, sam
Approved by: re
Previously local end of point-to-point interface is not reachable
within the system that owns the interface. Packets destined to
the local end point leak to the wire towards the default gateway
if one exists. This behavior is changed as part of the L2/L3
rewrite efforts. The local end point is now reachable within the
system. The inpcb code needs to consider this fact during the
address selection process.
Reviewed by: bz
Approved by: re
Use explicit int values for the device states in order to allow, if
necessary, in the future, adds of new states without breaking ABI
between revisions.
Please note that this is a special condition as we want this fix in
before RC1 as we assume it is critical and so it has been handled
as an instant-merge.
Approved by: re (kib)
Fix sched_switch_migrate() by assuming locks cannot be shared and a
deadlock between 3 different threads by acquiring both runqueue locks
when doing the migration.
Please note that this is a special condition as we want this fix in
before RC1 as we assume it is critical and so it has been handled
as an instant-merge. For the STABLE_7 branch, 1 week before the MFC
is assumed.
Approved by: re (kib)
The clear_remove() and clear_inodedeps() call vn_start_write(NULL, &mp,
V_NOWAIT) on the non-busied mount point. Unmount might free ufs-specific
mp data, causing ffs_vgetf() to access freed memory.
Busy mountpoint before dropping softdep lk.
Approved by: re (kensmith)
Remove 'ad:' prefix from disk serial number. We don't want serial number
to change when we reconnect the disk in a way that it is accessible through
CAM for example.
Discussed with: trasz
Simplify g_disk_ident_adjust() function and allow any printable character
in serial number.
Discussed with: trasz
Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
Make serial numbers of daX disks visible by GEOM.
No objections from: scottl
Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
Approved by: re (kib)
r196943,r196944,r196947,r196950,r196953,r196954,r196965,r196978,r196979,
r196980,r196982,r196985,r196992,r197131,r197133,r197150,r197151,r197152,
r197153,r197167,r197172,r197177,r197200,r197201:
r196456:
- Give minclsyspri and maxclsyspri real values (consulted with kmacy).
- Honour 'pri' argument for thread_create().
r196457:
Set priority of vdev_geom threads and zvol threads to PRIBIO.
r196458:
- Hide ZFS kernel threads under zfskern process.
- Use better (shorter) threads names:
'zvol:worker zvol/tank/vol00' -> 'zvol tank/vol00'
'vdev:worker da0' -> 'vdev da0'
r196662:
Add missing mountpoint vnode locking.
This fixes panic on assertion with DEBUG_VFS_LOCKS and vfs.usermount=1 when
regular user tries to mount dataset owned by him.
r196702:
Remove empty directory.
r196703:
Backport the 'dirtying dbuf' panic fix from newer ZFS version.
Reported by: Thomas Backman <serenity@exscape.org>
r196919:
bzero() on-stack argument, so mutex_init() won't misinterpret that the
lock is already initialized if we have some garbage on the stack.
PR: kern/135480
Reported by: Emil Mikulic <emikulic@gmail.com>
r196927:
Changing provider size is not really supported by GEOM, but doing so when
provider is closed should be ok.
When administrator requests to change ZVOL size do it immediately if ZVOL
is closed or do it on last ZVOL close.
PR: kern/136942
Requested by: Bernard Buri <bsd@ask-us.at>
r196928:
Teach zdb(8) how to obtain GEOM provider size.
PR: kern/133134
Reported by: Philipp Wuensche <cryx-freebsd@h3q.com>
r196943:
- Avoid holding mutex around M_WAITOK allocations.
- Add locking for mnt_opt field.
r196944:
Don't recheck ownership on update mount. This will eliminate LOR between
vfs_busy() and mount mutex. We check ownership in vfs_domount() anyway.
Noticed by: kib
Reviewed by: kib
r196947:
Defer thread start until we set priority.
Reviewed by: kib
r196950:
Fix detection of file system being shared. Now zfs unshare/destroy/rename
command will properly remove exported file systems.
r196953:
When snapshot mount point is busy (for example we are still in it)
we will fail to unmount it, but it won't be removed from the tree,
so in that case there is no need to reinsert it.
Reported by: trasz
r196954:
If we have to use avl_find(), optimize a bit and use avl_insert() instead of
avl_add() (the latter is actually a wrapper around avl_find() + avl_insert()).
Fix similar case in the code that is currently commented out.
r196965:
Fix reference count leak for a case where snapshot's mount point is updated.
r196978:
Call ZFS_EXIT() after locking the vnode.
r196979:
On FreeBSD we don't have to look for snapshot's mount point,
because fhtovp method is already called with proper mount point.
r196980:
When we automatically mount snapshot we want to return vnode of the mount point
from the lookup and not covered vnode. This is one of the fixes for using .zfs/
over NFS.
r196982:
We don't export individual snapshots, so mnt_export field in snapshot's
mount point is NULL. That's why when we try to access snapshots over NFS
use mnt_export field from the parent file system.
r196985:
Only log successful commands! Without this fix we log even unsuccessful
commands executed by unprivileged users. Action is not really taken, but it is
logged to pool history, which might be confusing.
Reported by: Denis Ahrens <denis@h3q.com>
r196992:
Implement __assert() for Solaris-specific code. Until now Solaris code was
using Solaris prototype for __assert(), but FreeBSD's implementation.
Both take different arguments, so we were either core-dumping in assert()
or printing garbage.
Reported by: avg
r197131:
Tighten up the check for race in zfs_zget() - ZTOV(zp) can not only contain
NULL, but also can point to dead vnode, take that into account.
PR: kern/132068
Reported by: Edward Fisk <7ogcg7g02@sneakemail.com>, kris
Fix based on patch from: Jaakko Heinonen <jh@saunalahti.fi>
r197133:
- Protect reclaim with z_teardown_inactive_lock.
- Be prepared for dbuf to disappear in zfs_reclaim_complete() and check if
z_dbuf field is NULL - this might happen in case of rollback or forced
unmount between zfs_freebsd_reclaim() and zfs_reclaim_complete().
- On forced unmount wait for all znodes to be destroyed - destruction can be
done asynchronously via zfs_reclaim_complete().
r197150:
There is a bug where mze_insert() can trigger an assert() of inserting
the same entry twice. This bug is not fixed yet, but leads to situation
where when try to access corrupted directory the kernel will panic.
Until the bug is properly fixed, try to recover from it and log that it
happened.
Reported by: marck
OpenSolaris bug: 6709336
r197151:
Be sure not to overflow struct fid.
r197152:
Extend scope of the z_teardown_lock lock for consistency and "just in case".
r197153:
When zfs.ko is compiled with debug, make sure that znode and vnode point at
each other.
r197167:
Work-around READDIRPLUS problem with .zfs/ and .zfs/snapshot/ directories
by just returning EOPNOTSUPP. This will allow NFS server to fall back to
regular READDIR.
Note that converting inode number to snapshot's vnode is expensive operation.
Snapshots are stored in AVL tree, but based on their names, not inode numbers,
so to convert inode to snapshot vnode we have to interate over all snalshots.
This is not a problem in OpenSolaris, because in their READDIRPLUS
implementation they use VOP_LOOKUP() on d_name, instead of VFS_VGET() on
d_fileno as we do.
PR: kern/125149
Reported by: Weldon Godfrey <wgodfrey@ena.com>
Analysis by: Jaakko Heinonen <jh@saunalahti.fi>
r197172:
Add missing \n.
Reported by: marck
r197177:
Support both case: when snapshot is already mounted and when it is not yet
mounted.
r197200:
Modify mount(8) to skip MNT_IGNORE file systems by default, just like df(1)
does. This is not POLA violation, because there is no single file system in the
base that use MNT_IGNORE currently, although ZFS snapshots will be mounted with
MNT_IGNORE after next commit.
Reviewed by: kib
r197201:
- Mount ZFS snapshots with MNT_IGNORE flag, so they are not visible in regular
df(1) and mount(8) output. This is a bit smilar to OpenSolaris and follows
ZFS route of not listing snapshots by default with 'zfs list' command.
- Add UPDATING entry to note that ZFS snapshots are no longer visible in
mount(8) and df(1) output by default.
Reviewed by: kib
Approved by: re (bz)
Don't malloc a buffer while holding the prison0 mutex. Instead, use a loop
where we figure out the hostname length under the lock, malloc the buffer
with the lock dropped, then recheck the length under the lock and loop again
if the buffer is now too small.
Approved by: re (kib)
Add LK_NOWITNESS to the vn_lock() calls done on newly created nfs
vnodes, since these nodes are not linked into the mount queue and,
as such, the vn_lock() cannot cause a deadlock so LORs are harmless.
Suggested by: kib
Approved by: re (kensmith), kib (mentor)
