up and can cause issues on boot with the prompts. Fix the read-only
root case with horrible kludge of mounting rw removing the files, then
mounting ro. But since that's no more horrible than the kludge of
using marker files in /. With this change, NanoBSD configs can safely
use /firstboot + growfs to produce minimal images that grow to the
size of the card.
contain characters not allowed in a shell variable (such as "-").
These will be replaced by an underscore in jail config variables,
e.g. for jail "foo-bar" you would set "jail_foo_bar_hostname".
This is separate from the current code that changes the jail names
if they contain "." or "/". It also doesn't apply to jails defined
in a jail.conf file.
PR: 191181
MFC after: 5 days
USB NICs.
USB network hardware may not be enumerated and available when the rc.d
networking scripts run. Eventually the USB attachment completes and devd
events cause the network initialization to happen, but by then other rc.d
scripts have already failed, because services which depend on NETWORKING
(such as mountcritremote) may end up running before the network is actually
ready.
There is an existing netwait script, but because it is dependent on
NETWORKING it runs too late to prevent failure of some other rc
scripts. This change flips the order so that NETWORKING depends on netwait,
and netwait now depends on devd and routing (the former is needed to make
interfaces appear, and the latter is needed to run the ping tests in
netwait).
The netwait script used to be oriented primarily towards "as soon as any
host is reachable the network is fully functional", so you gave it a list of
IPs to try and you could optionally name an interface and it would wait for
carrier on that interface. That functionality still works the same, but now
you can provide a list of interfaces to wait for and it waits until each one
of them is available. The ping logic still completes as soon as the first IP
on the list responds.
These changes were submitted by Brenden Molloy <brendan+freebsd@bbqsrc.net>
in PR 205186, and lightly modified by me to allow a list of interfaces
instead of just one.
PR: 205186
Differential Revision: https://reviews.freebsd.org/D4608 (timeout w/o review)
bugfix-only release, with no new features.
Please note that from 3.5.0 onwards, clang and llvm require C++11
support to build; see UPDATING for more information.
tools/regression/mac/mac_portacl into the FreeBSD test suite as
tests/sys/mac/bsdextended and tests/sys/mac/portacl, respectively
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
lib/libc/tests/nss
- Convert the testcases to ATF
- Do some style(9) cleanups:
-- Sort headers
-- Apply indentation fixes
-- Remove superfluous parentheses
- Explicitly print out debug printfs for use with `kyua {debug,report}`; for
items that were overly noisy, they've been put behind #ifdef DEBUG
conditionals
- Fix some format strings
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
Currently rc scripts implementing their own start_cmd do not enjoy the
benefits of rc.subr's own check for rc_pid.
This leads to around a third of ports with such a start_cmd not to check for
the process at all and two thirds of ports to re-implement this check
(sometimes wrongly).
This patch moves the check for rc_pid to before ${rc_arg}_cmd is executed.
Submitted by: Dirk Engling
Reviewed by: feld
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4156
This request by the submitter was valid, but unfortunately there is a good deal
of concern over breakage when DESTDIR != / or "", i.e. with release media.
Making this change correct for all cases would make it markedly more complex
than need be
Requested by: bdrewery, ian, imp
PR: 76362
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
to the rc scripts. With these changes, setting nfs_server_managegids="YES"
in /etc/rc.conf will enable this capability.
Suggested by: jpaetzel
Tested by: jpaetzel
Reviewed by: rc (pending)
MFC after: 2 weeks
tests/sys/kern/pipe
- Fix style(9) bugs
- Fix compiler warnings
- Use `nitems(x)` instead of `sizeof(x) / sizeof(*x)` pattern
The testcases will be converted over to ATF eventually, but for now will be
integrated in as plain C tests
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The :encode_tv_random_million testcase fails the epsilon tests a few thousand
times out of one million, so expect the testcase to fail
MFC after: 1 week
Submitted by: keramida
Sponsored by: EMC / Isilon Storage Division
The goal here is to make the upgrade seamless for users
Add aliases for zh_HK
Remove bad symlinks created by previous bad upgrade procedure.
Complete ObsoleteFiles.inc with more locales that have been removed
tree was /usr/src/svn, /sys would point to usr/src/svn
This fixes the assumption that the source tree will always exist at
${DESTDIR}/usr/src
MFC after: 1 week
PR: 76362
Reported by: Scot Hetzel <swhetzel@gmail.com>
Sponsored by: EMC / Isilon Storage Division
output from df, similar to what security/200.chkmounts does. This can be
useful to avoid listing automounted ZFS snapshots, for instance.
MFC after: 1 week
This fixes /var/empty not being schg in the installation.
This was a change from fmtree to nmtree, that -i is now required to
apply these flags.
PR: 194189
Submitted by: guyyur@gmail.com
MFC after: 2 weeks
Relnotes: yes
Most daily_status_security_* variables in periodic.conf were changed to
security_status_* in SVN r254974. The compatibility code for the old names
did not work.
PR: 204331
Submitted by: martin at lispworks.com
MFC after: 1 week
Before this change, the 520.pfdenied script listed all rules that
matched /^block/ in the rule. Restrict the printed output to only
those rules that result in packets being dropped.
PR: conf/187224
Approved by: rpaulo (mentor)
Differential Revision: https://reviews.freebsd.org/D4068
The command was checking local/remote system uptime, so rename the script to
match its function and to avoid confusion
The controlling variable in /etc/periodic.conf has been renamed from
daily_status_rwho_enable to daily_status_uptime_enable.
MFC after: 3 days
Reported by: Peter Jeremy <peter@rulingia.com>
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
if they are not required for mounting rootfs. However, it's possible
that some setups try to mount them in mountcritlocal (ie from fstab).
Export the list of current root mount holds using a new sysctl,
vfs.root_mount_hold, and make mountcritlocal retry if "mount -a" fails
and the list is not empty.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3709
as lib/libc/rpc
This testcase requires rpcbind be up in running; otherwise the testcases
will time out and be skipped
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Extend OptionalObsoleteFiles.inc to delete all lib32 files when MK_LIB32 is
set to no on a system that previously had lib32 libraries installed.
Also, to prevent "make delete-old-dirs" from always deleting lib32 directories
after an installworld, move the lib32 subtree to its own mtree file that only
gets applied when MK_LIB32=yes.
Test: Ran "make delete-old" and "make delete-old-libs" on a system that never
had MK_LIB32 enabled, and on a system where MK_LIB32 was enabled and later
disabled. Did this both on amd64 and powerpc64.
Test: Ran "make tinderbox" without errors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3923
bin/dd/tests
Ensure fdescfs is mounted on /dev/fd/ for the length testcase as it's used
in validating the characters read from /dev/zero
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Make the requirements more complete for the testcases
- Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1)
is available, ACL support is enabled with UFS, etc).
- Work with temporary files/directories/mountpoints that work with atf/kyua
- Limit the testcases to work on temporary filesystems to reduce tainting the
test host
MFC after: 2 weeks
Reviewed by: trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D3810
test suite as tests/sys/posixshm
Some other highlights:
- Convert the testcases over to ATF
- Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
mkstemp to generate temporary paths for non-SHM_ANON shm objects.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
leap second date correct
Updates to the file can be obtained from ftp://time.nist.gov/pub/ or
ftp://tycho.usno.navy.mil/pub/ntp/.
Suggested by: dwmalone
Reviewed by: roberto, dwmalone, delphij
Approved by: roberto
MFC after: 1 week
bug of installing 'realtek' and 'intel_iwn' as files rather then as
a 'LICENSE' file in their directories.
Also add obsolete entries for the older names and names that existed in head
for a period of time.
Suggested by: jmg
X-MFC-With: r289391
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
target. This is the feeder for mergemaster / etcupdate. This change
makes installworld/mergemaster/etcupdate behave the same regardless of
whether SENDMAIL_MC or SENDMAIL_CF is used.
If you use a custom SENDMAIL_MC/CF in make.conf and excluded it from
mergemaster.rc/etcupdate.conf to work around the conflicts, you may wish
to revert that or change it from 'ignore' to 'always install'.
If you do not use a custom SENDMAIL_MC/CF, there should be no change in
behavior.
the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)
This also makes packaging base less intrusive by getting a single point where
to add tags.
The functional_test.sh harness for each test subdir was inspired
by the version in bin/sh/tests/functional_test.sh
Some gymnastics were required to deal with implicit rules for
.c / .o -> .out as the suffix transformation rules were
incorrectly trying to create the test outputs from some of the
source files
Sponsored by: EMC / Isilon Storage Division
the console is attached to. This makes this file identical to the 32-bit
arm version of this file.
Obtained from: EuroBSDCon devsummit
Sponsored by: ABT Systems Ltd
the module is built-in to the kernel then the kldunload will fail. Rather
than do this just check if there are rules and then remove them all.
Add requirement on FILESYSTEMS to ensure /usr is present for /usr/sbin/ugidfw
and /usr/bin/xargs. This was already effectively the ordering from rcorder(8).
MFC after: 2 weeks
Relnotes: yes
* Allow the user to configure the login class to use in rc.conf
by using {daemon}_login_class, which;
* Use the daemon class by default;
* .. and then use 'limits' to set the login class so it works both
via init at startup (which runs this in 'daemon' class) and via
whichever root environment (eg command line, other daemons, etc.)
Reviewed by: dteske
Differential Revision: https://reviews.freebsd.org/D3630
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
o In pccard_ether add code to start children of a 802.11
device, that are configured in rc.conf.
o In devd.conf provide a regex matching all 802.11 devices,
and on match run pccard_ether to spawn children.
PR: 202784
Submitted by: <vidwer gmail.com>
In collaboration with: "Oleg V. Nauman" <oleg opentransfer.com>
connectivity interact with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
users who uses only FreeBSD -CURRENT, and building these indexes are
only useful to those who share ports tree across different FreeBSD
releases, and system administrator with that need can always enable
this behavior.
MFC after: 2 weeks (only the principals, not actual change)
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:
https://wiki.freebsd.org/projects/ifnet/net80211
Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.
Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
setups that worked before, flip the default to "YES". Most people don't
have /etc/rctl.conf, so they won't be affected in any way.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
I also changed ${...%*/rc.d} to ${...%/rc.d} since the shortest match always
has an empty string for the asterisk.
PR: 201641
Submitted by: Jamie Landeg-Jones (original version)
MFC after: 1 week
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
for a long time, quota(1) utility supported only PF_INET.
- Clean up confusing changes in f_mntfromname.
- Add an entry for rquotad with rpc/udp6 to inetd.conf.
PR: 194084
I've been doing this ever since there were tables
coudl make more efficient by using "in recv" and "out xmit" instead of via
but I'll leave that.
MFC after: 1 week
This should make all consoles available, whether it
is VGA, HDMI, serial, or JTAG, but more importantly
enables all consoles when ttyu0 is not predictable.
For example, the Pandaboard ES apparently has three
consoles available, but the DB9/RS232 serial port is
ttyu2, so not available by default after the system
boots.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
target. This effectively reverts r261142, which reverted both
r261031 and r261044.
Prodded by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
devd.conf execution of third-party software, that needs libraries
from /usr/local. Since devd is launched before ldconfig script, if
the hardware that has associated software is attached on boot, then
execution would fail.
Differential Revision: https://reviews.freebsd.org/D2332
Reviewed by: imp
ACPI C3 ends up doing a lot more work before entering sleep, some of which
requires grabbing a global ACPI hardware serialising mutex.
Because of this, the more CPU cores you have, the more that lock contends
under load, reaching close to the #1 lock contention (after VM, which is being
worked on.)
Tested:
* Sandy bridge Xeon, 2 socket * 8 core
* Ivy bridge Xeon v2, 2 socket * 8 core
* Westmere-EX, 4 socket * 10 core
* Ivybridge desktop
* Sandybridge mobile
* Ivybridge mobile
MFC after: 2 weeks
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
X-MFC with: r282076
MFC after: 6 days
discontinued by its initial authors. In FreeBSD the code was already
slightly edited during the pf(4) SMP project. It is about to be edited
more in the projects/ifnet. Moving out of contrib also allows to remove
several hacks to the make glue.
Reviewed by: net@
- Remove extranious echo that breaks puppet
- Handle restarts of multiple pflog devices correctly
- Add the ability to perform actions on specific pflog devices.
PR: 199150
Submitted by: jason.unovitch@gmail.com
MFC after: 3 days
In particular, this allows an administrator to specify "-h" for human
readable output if that is preferred.
The default setting passes "-d", so that can be excluded by using a custom
setting.
Differential Revision: https://reviews.freebsd.org/D2034
Submitted by: Lystopad Aleksandr <laa@laa.zp.ua>
(patch to add option for -h)
Reviewed by: bz
MFC after: 1 week
ENTRY_ATTRIBUTE (eg cn) after the VALUE_ATTRIBUTE (eg automountInformation),
instead of before.
PR: 198557
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
For each test category, we generate a script containing ATF test cases for
the tests under that category. Each test case simply runs dtest.pl (the
upstream test harness) with the corresponding test files. The exclude.sh
script is used to record info about tests which should be skipped or are
expected to fail; it is used to generate atf_skip and atf_expect_fail calls.
The genmakefiles.sh script can be used to regenerate the test makefiles when
new tests are brought it from upstream.
The test suite is currently not connected to the build as there is a small
number of lingering test issues which still need to be worked out. In the
meantime however, the test suite can be easily built and installed
manually from cddl/usr.sbin/dtrace/tests.
Reviewed by: ngie
Sponsored by: EMC / Isilon Storage Division
This avoids various failure modes (e.g., when building and installing a
single binary with debug data on a system that otherwise does not have
it enabled).
It is also consistent with the way other directory hierarchies are
handled (e.g. share/man).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1962
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
r272959 broke compatibility with mfsBSD that stores the default network
config file in /etc/rc.conf.d/network. In order to fix that load the network
config file from netif also.
This change implements a notification (via devctl) to userland when
the kernel produces coredumps after a process has crashed.
devd can then run a specific command to produce a human readable crash
report. The command is most usually a helper that runs gdb/lldb
commands on the file/coredump pair. It's possible to use this
functionality for implementing automatic generation of crash reports.
devd(8) will be notified of the full path of the binary that crashed and
the full path of the coredump file.
This was a discrepancy between ^/projects/building-blocks and ^/head that I
didn't resolve before committing the change to ^/head
Pointyhat to: me
Reported by: jhb
MFC after: 20 days
X-MFC with: r278249
Sponsored by: EMC / Isilon Storage Division
build/install without disrupting other dependent services (see r278249, et
al):
- MK_LOCATE
- MK_MAN
- MK_NLS
- MK_OPENSSL
- MK_PKGBOOTSTRAP
- MK_SENDMAIL
Additional flags need to be handled in etc/Makefile, but it requires
refactoring the relevant scripts in etc/rc.d/*
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
