Commit Graph

200 Commits

Author SHA1 Message Date
Hiten Pandya
b77c32a07e Rename BUS_DMAMEM_NOSYNC to BUS_DMA_COHERENT.
The current name is confusing, because it indicates to
the client that a bus_dmamap_sync() operation is not
necessary when the flag is specified, which is wrong.

The main purpose of this flag is to hint the underlying
architecture that DMA memory should be mapped in a coherent
way, but the architecture can ignore it.  But if the
architecture does supports coherent mapping of memory, then
it makes bus_dmamap_sync() calls cheap.

This flag is the same as the one in NetBSD's Bus DMA.

Reviewed by: gibbs, scottl, des (implicitly)
Approved by: re@ (jhb)
2003-05-30 20:40:33 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
Poul-Henning Kamp
73f936c5ac NODEVFS cleanup:
Don't call cdevsw_{add,remove}()
Remove remnants of the previous DEVFS.
2003-02-26 21:10:04 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Gary Jennejohn
b54c65a9b7 Fix another typo in a comment which I noticed while doing the MFC. 2003-02-06 14:52:47 +00:00
Gary Jennejohn
6a622ac3a3 Fix some typos in 3 comments.
Reported by: marius@alchemy.franken.de
2003-02-01 14:43:24 +00:00
Gary Jennejohn
68e12ba37e Add a fix for the case where the dialout fails. In this case the isp
interface was left in an active, but not connected, state, which resulted
in data being sent to it and the transmit queue filling up. This happened
because the driver never informed sppp that it shoulkd clean up the
connection. This fix informs sppp that it should clean things up.

The fix was actually developed and tested under -stable, so a short MFC
period seems appropriate, say 2 days.

Contributed by: Ari Suutari <ari.suutari@syncrontech.com>
2003-01-30 14:19:58 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Sam Leffler
6fc32a2495 network interface and link layer changes:
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible

Reviewed by:	many
Approved by:	re
2002-11-15 00:00:15 +00:00
Brooks Davis
a5066cff3a Don't include the depricated "bpf.h" and always compile in bpf support
as per current practice.
2002-10-21 05:05:43 +00:00
Poul-Henning Kamp
6df6552a3d Be consistent about marking functions static.
Found by:	FlexeLint.
2002-10-15 20:32:45 +00:00
Poul-Henning Kamp
85fee3197a It's bad enough people can't figure out to use the same code, or in
this case, ugly macros, but the data tables can be reused:

Put one copy of the software HDLC tables in its own file.
2002-09-11 12:44:58 +00:00
Poul-Henning Kamp
695aa14fe2 Add missing calls to mtx_init().
It seems counter-intuitive that all drivers have to do this.

Pointed in right direction by:	gj
2002-09-10 16:41:08 +00:00
Brooks Davis
5906e69ac2 Continue de-counting i4b. Devices i4bctl, i4bcapi, iavc, i4bq921,
i4bq931, i4b, isic, iwic, ifpi, ifpi2, ifpnp, ihfc, and itjc are
no longer count devices.  Also remove a few other instances of N<DEVICE>
being used to control compilation of whole files.

Reviewed by:    hm
2002-09-02 00:52:11 +00:00
Hellmuth Michaelis
52b5377d2f Bugfix to enable dialer "connected" response. 2002-08-27 14:19:28 +00:00
Philippe Charnier
93b0017f88 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:23:09 +00:00
Hellmuth Michaelis
866a3fa2bf add support properly displaying and logging incoming telephone numbers (MSNs)
by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
2002-08-12 07:53:55 +00:00
Hellmuth Michaelis
9ed6ae76c7 add experimental support for Data over Voice (DoV) outgoing calls.
based on patches received from Guy Ellis (guy@traverse.com.au),
Chris Collins (xfire@xware.cx) and Phillip Musumeci (phillip@cs.jcu.edu.au).
2002-08-11 15:47:26 +00:00
Brooks Davis
22afbb6bb0 Remote pci.h/NPCI usage from i4b code.
Approved by:	hm
2002-06-13 06:04:28 +00:00
Jens Schweikhardt
21dc7d4f57 Fix typo in the BSD copyright: s/withough/without/
Spotted and suggested by:	des
MFC after:	3 weeks
2002-06-02 20:05:59 +00:00
Alfred Perlstein
7e743e3a41 Unbreak LINT by compensating for the
ng_parse_struct_info -> ng_parse_struct_field change.
2002-06-01 19:54:21 +00:00
Bruce Evans
e788f79698 Fixed printf format errors which apparently crept in while -Wformat was
disabled for gcc-3.
2002-05-25 11:18:03 +00:00
Peter Wemm
b01d78f42f Oops, I missed this warning. Comment out extra junk after #endif 2002-05-24 06:22:48 +00:00
Peter Wemm
fe8ae4dd13 Fix some low hanging fruit warnings. There are problems in i4b_ing.c
still, but they are due due to some bogosity in netgraph.
2002-05-24 05:46:50 +00:00
Gary Jennejohn
c0a06166a0 Fix a problem which could cause some machines to hang after a warm boot.
This should be in 4.6.

Submitted by:	Ari Suutari <ari.suutari@syncrontech.com>
2002-05-10 12:04:04 +00:00
Gary Jennejohn
3573a23fa1 Change instances of avma1pp2- to ifpi2- in printf's since the name
of the driver should be emitted.

This was already changed in the code committed to RELENG_4.
2002-04-28 11:47:10 +00:00
Gary Jennejohn
bb83e7583e On slow machines interrupts could be lost, so check for pending
interrupts in a loop.

Tested by: Andrew Gordon <arg-bsd@arg1.demon.co.uk>
2002-04-23 10:25:35 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Hellmuth Michaelis
3c1d185c2a Add support for Q.931 subaddresses.
Submitted by: Steven Looman <fsteevie@wish.net>
2002-03-26 15:13:54 +00:00
Alfred Perlstein
89c9a48352 Remove __P. 2002-03-20 07:51:46 +00:00
Hellmuth Michaelis
e0d83003c4 Clean up the i4b kernel part: remove unmaintained #if(def)s for NetBSD,
OpenBSD and BSD/OS and respective code, remove pre $FreeBSD CVS id's,
remove #if(def)s and respective code for FreeBSD versions < 5 .
2002-03-17 09:33:15 +00:00
Hellmuth Michaelis
cd987b48ab remove BSD/OS specific ppp-interface file since the FreeBSD-BSD/OS merger
is IMHO likely not to happen anymore ...
2002-03-09 13:18:24 +00:00
Hellmuth Michaelis
b25b877461 After joergs merge of i4b's sppp with the main sppp, remove obsolete file. 2002-03-09 13:14:49 +00:00
Peter Wemm
183439a14a Quiet bogus gcc warning 2002-02-28 03:15:53 +00:00
Gary Jennejohn
ffa4ab673b Remove a redundant decalaration of call_desc[] since it's now a
fatal error.
2002-02-27 08:33:08 +00:00
Gary Jennejohn
4c6aff87c8 Make call_desc[] extern since it's also defined in layer4/i4b_l4mgmt.c
which was causing the link of the kernel to fail. Since layer4/i4b_l4mgmt.c
is always required by i4b and layer3/i4b_q931.c is only needed when a
passive card is present it makes sense to have the declaration in the
former file only.

No MFC required since the problem only became apparent after a change to
the compile options in -current which AFAIK wasn't made in -stable.
2002-01-13 19:16:52 +00:00
Gary Jennejohn
588974c99a Fix some places where the macro L0IFPIUNIT was used instead of the correct
form L0IFPI2UNIT. This could result in a panic if the user tried to
trace using isdntrace(8). I fixed this locally but forgot to commit it.

Reminded by:	"Wittig, Christoph" <wc@medianet-world.de>
2002-01-02 12:55:04 +00:00
Joerg Wunsch
c4552f53b1 Remove unused includes. 2001-12-31 09:31:30 +00:00
Joerg Wunsch
230ce3668b Fix two typos in previous commit. 2001-12-30 19:37:41 +00:00
Joerg Wunsch
734b6a9ee0 Remove references to i4b/driver/i4b_ispppsubr.c, now that
net/if_spppsubr.c has all its features.

Hooray, it's gone!

MFC after:	1 month
2001-12-30 18:48:24 +00:00
Gary Jennejohn
1c6126426b Protect mtx_init() invocations with mtx_intialized() checks to avoid a
reported panic.

Submitted by:	Alexander Leidinger <Alexander@Leidinger.net> (partly)
MFC after:	4 weeks
2001-12-30 09:27:28 +00:00
Gary Jennejohn
01ecab4055 Fix an error which could cause a panic if both an ifpi and ifpi2 controller
were installed.

For the ifpi2, change the string in the driver_t from "ifpi2" to
"ifpi2-" so that one sees "ifpi2-0" instead of "ifpi20" at boot time.
2001-12-29 17:19:25 +00:00
Gary Jennejohn
dc16760bf7 Add support for the AVM Fritz!Card PCI version 2 controller.
MFC after:	4 weeks
2001-12-22 09:25:55 +00:00
Gary Jennejohn
c3e8386594 Add a driver for the AVM Fritz!Card PCI version 2 ISDN controller.
MFC after:	4 weeks
2001-12-22 09:22:02 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Hellmuth Michaelis
365bf7980c fix kvprintf panic in attach routine 2001-10-24 14:12:47 +00:00
Hellmuth Michaelis
8ae67d78bf Fix bug attaching the ELSA PCC16, the cardtyp value was set incorrectly
in the probe routine.
MFC after:	3 days
2001-10-21 09:22:48 +00:00
Hellmuth Michaelis
676ccc0cd0 Add a driver for the Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP
card.

Submitted by:   Steve Looman
Reviewed by:    hm
MFC after:      1 month
2001-10-21 09:20:52 +00:00
Hellmuth Michaelis
a986a974e9 It seems that I slipped a nasty bug into the CAPI support. The message
lengths for CONNECT_REQ and CONNECT_IND are incorrect, which causes
dialouts to fail after certain error situations (an invalid -- not
wrong! -- number has been dialed). Since these messages are tagged as
too short, the device reads trailing garbage as the B protocol
parameters; this is OK as long as the garbage consists of zero bytes,
which it usually does, except after the said error.

Another change we have taken into use is to send an explicit Q.850
"normal call clearing" code when a call is ignored using PRI equipment
(specifically AVM T1); the CAPI pseudo-code for ignore, 1, translates
into something at least Ericsson exchanges interpret oddly (message
"this area is not reachable from your number"). NCCLR makes the exchange
give a busy signal, which is the behaviour at least we prefer
(conceivably, the ignore code could be made a sysctl variable).

The attached patch corrects the message length issue. It also includes a
somewhat unpretty solution for the PRI ignore code (if device's number
of channels equals 30, assume PRI and send NCCLR, otherwise send CAPI
ignore). Tested using AVM B1 PCI and T1 PCI.

Submitted by:	Juha-Matti Liukkonen <jml@cubical.fi>
Reviewed by:	hm
MFC after:	1 month
2001-10-21 08:51:54 +00:00
Hellmuth Michaelis
8f3a90354e Add experimental support for sending keypad facility messages.
MFC after: 2 months
2001-10-18 11:58:49 +00:00
Jonathan Lemon
a743950fc2 sppp rewrites the interface's ip address directly; this breaks when the
address is looked up via a hash table.  Add a hack to move the entry to
a new hash bucket when the address changes.

Submitted by: tmm
2001-10-01 18:03:56 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Kris Kennaway
bf61e26696 Fix some signed/unsigned integer confusion, and add bounds checking of
arguments to some functions.

Obtained from:	NetBSD
Reviewed by:	peter
MFC after:	2 weeks
2001-09-10 11:28:07 +00:00
Hellmuth Michaelis
f305cfab6a make driver compile under 4.3-STABLE 2001-07-22 19:55:05 +00:00
Hellmuth Michaelis
4d02f92dd2 update step. 2001-07-21 11:31:27 +00:00
Hellmuth Michaelis
6b244dc54b Submitted by: Juha-Matti Liukkonen (Cubical Solutions Ltd) (jml@cubical.fi)
Add a CAPI (hardware independent) driver i4bcapi(4) and hardware driver
iavc (4) to support active CAPI-based BRI and PRI cards (currently AVM
B1 and T1 cards) to isdn4bsd.
2001-05-25 08:43:30 +00:00
Hellmuth Michaelis
078aac9c09 Submitted by: Juha-Matti Liukkonen, Cubical Solutions Ltd (jml@cubical.fi)
Reviewed by:	hm

Bug in i4btel driver read routine corrected. The conditions in the
while() clause caused the receive queue to be referenced before checking
if a channel is connected, leading to kernel panic (do a 'dd
if=/dev/i4btel0 of=/dev/null' on an unconnected tel device, panic will
follow). Correction was to reorder the while clause conditions to check
for connectedness first.
2001-05-21 09:24:48 +00:00
Jens Schweikhardt
de79862524 pseudo-device -> device in kernel config.
Reviewed by:	joerg, dd
2001-05-01 11:26:14 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Joerg Wunsch
4161cdbce1 (MFC candidate since this is already a merge from /sys/net only.)
Merge rev's 1.65 and 1.66 from sys/net/if_spppsubr.c (implement the
`restart' option, and fix a blatant bug with PAP authentication).

The i4b implementation of this file should be merged back, but for now,
we need this here as well.

Reviewed by:	gj
2001-03-25 09:59:23 +00:00
Jeroen Ruigrok van der Werven
7c63796828 Preceed/preceeding are not english words. Use precede or preceding. 2001-02-18 10:25:42 +00:00
Jeroen Ruigrok van der Werven
1a6e52d0e9 Fix typo: seperate -> separate.
Seperate does not exist in the english language.
2001-02-06 11:21:58 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
Peter Wemm
19b61693ce Pull the rug from under the 'LKM Compatability' macro - PSEUDO_SET().
There are two 3rd party code chunks using this still - the IPv6 stuff and
i4b.  Give them a private copy as an alternative to changing them too much.

XXX sys/kernel.h still has a #include <sys/module.h> in it.  I will be
taking this out shortly - this affects a number of drivers.
2001-02-04 11:46:17 +00:00
Peter Wemm
920c17857f Stop counting sppp interfaces, we were just testing its presence to give
a warning if it was missing.
2001-01-29 12:27:46 +00:00
Hellmuth Michaelis
d04d012625 Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
Thanks a lot to Jakob Schripsema (sch@kpn.com) for pointing out similarities
of the Eicon 2.02 to the Siemens I-surf driver !
2001-01-26 13:16:11 +00:00
Hellmuth Michaelis
8567e1d3e2 Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards.
Increment i4b minor revision (=step) so a buildworld or a make install in
/usr/src/sys/include is necessary to get isdnd and i4b kernel parts in sync.
2001-01-26 13:12:56 +00:00
Hellmuth Michaelis
b5dd89c336 remove redundant definitions of card types:
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
 - remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
2001-01-24 08:41:52 +00:00
Hellmuth Michaelis
74acef9ae7 Remove useless variable vjlen.
Submitted by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-23 10:01:55 +00:00
Hellmuth Michaelis
92ced03849 Update the iwic driver: fix error handling for rx errors on the D-channel
which prevents erroneous packets from being put onto the protocol stack;
enhance error detection for B-channel HDLC errors; remove old cvs id´s.
2001-01-21 10:12:50 +00:00
Garrett Wollman
074a4a2c84 Finish deprecating <sys/select.h> in favor of <sys/selinfo.h> in kernel code. 2001-01-20 02:24:07 +00:00
Hellmuth Michaelis
54a232485c it seems that a commit to i4b/drivers/i4b_ispppsubr.c on 2000-01-12 has
broken the handling of uncompressed VJ packets. The attached diff should
hopefully fix that.
Submitted by:	Thomas Moestl <tmoestl@gmx.net>
Reviewed by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-15 14:58:46 +00:00
Hellmuth Michaelis
23f507c5d1 Reenable support for FreeBSD 4.x and possibly the other supported BSD's 2001-01-15 14:54:43 +00:00
Hellmuth Michaelis
6c5ddf6863 Fix a bug overwriting random data when Van Jacobsen header compression
was used with the isp/isppp driver.
Submitted by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-12 08:48:54 +00:00
Hellmuth Michaelis
2fbe70cb49 Add the ISDN itjc hardware driver. This driver supports the NETJet-S cards
from Traverse Technology and also the Teles PCI-TJ cards both based on the
chipset combination of the Siemens ISAC and the TJNet Tiger300/320 chips.

The itjc/i4b_hdlc.h file will hopefully soon be merged with the file
/usr/src/sys/i4b/layer1/i4b_hdlc.h.

Submitted by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-11 14:35:45 +00:00
Hellmuth Michaelis
6624680fec Add infrastructure to support the ISDN itjc hardware driver.
Submitted by:	Sergio de Souza Prallon <prallon@tmp.com.br>
2001-01-11 14:26:39 +00:00
Hellmuth Michaelis
2fd9d69993 Update the ihfc driver with a patch from the author. He writes: This patch
enables the driver to work on current (I have not tested the isa part fully,
but I suppose it should work). The patching from jlemon caused a crash at
probe time. This is probably my fault not having added a comment for
"RESET_SOFT" saying: "this resets all!".

Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2001-01-11 13:38:38 +00:00
Hellmuth Michaelis
0dac6ca13f Add PCI id's for the Planet PCI ISDN Adapter (Model IA128P-STDV)
Submitted by:	Luiz Henrique Duma <duma@bsi.com.br>
2001-01-10 13:34:23 +00:00
Jonathan Lemon
13403f7fd8 Move the mutex initialization from avma1pp_bchannel_setup into
avma1pp_attach_avma1pp, since the former may be called multiple
times and we only want to initialize the mutex once.

Submitted by: Thomas Moestl <tmoestl@gmx.net>
2001-01-09 15:01:42 +00:00
Jonathan Lemon
5f107f17b2 When queueing a packet, call the output start routine. I botched this
during the initial ifqueue conversion.

Submitted by: Thomas Moestl <tmoestl@gmx.net>
2001-01-09 14:59:43 +00:00
Julian Elischer
30400f03aa Part 2 of the netgraph rewrite.
This is mostly cosmetic changes, (though I caught a bug or two while
makeing them)
Reviewed by:	archie@freebsd.org
2001-01-08 05:34:06 +00:00
Julian Elischer
069154d55f Rewrite of netgraph to start getting ready for SMP.
This version is functional and is aproaching solid..
notice I said APROACHING. There are many node types I cannot test
I have tested: echo hole ppp socket vjc iface tee bpf async tty
The rest compile and "Look" right.  More changes to follow.
DEBUGGING is enabled in this code to help if people have problems.
2001-01-06 00:46:47 +00:00
Julian Elischer
589f6ed8ce Divorce the kernel binary ABI version number from the message
format version number. (userland programs should not need to be
recompiled when the netgraph kernel internal ABI is changed.

Also fix modules that don;t handle the fact that a caller may not supply
a return message pointer. (benign at the moment because the calling code
checks, but that will change)
2000-12-18 20:03:32 +00:00
Julian Elischer
ca976de62f Change initialiser to match new structure layout.
forgotten by: Me
Found by: GCC
2000-12-12 23:52:43 +00:00
Julian Elischer
859a4d166c Reviewed by: Archie@freebsd.org
This clears out my outstanding netgraph changes.
There is a netgraph change of design in the offing and this is to some
extent a superset of soem of the new functionality and some of the old
functionality that may be removed.

This code works as before, but allows some new features that I want to
work with and evaluate. It is the basis for a version of netgraph
with integral locking for SMP use.

This is running on my test machine with no new problems :-)
2000-12-12 18:52:14 +00:00
Hellmuth Michaelis
1fa9b0422d Bugfix: enable interrupt sharing for ELSA Microlink ISDN PCI 2000-12-03 16:20:33 +00:00
Poul-Henning Kamp
4d88c4598f Make log(-1, ...) do what addlog(...) did.
Replace all uses of addlog(...) with log(-1, ...)

Remove bogus "register" keywords in subr_prf.c

Make log() return void.
2000-11-26 19:34:06 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Hellmuth Michaelis
b51f30edab Fix i4b netgraph interface to not kernel panic at boot time
Make code compile and work for FreeBSD 4.x as well as FreeBSD 5.x
Submitted by: Michael Reifenberger <root@nihil.plaut.de>
2000-11-09 12:27:31 +00:00
Jeroen Ruigrok van der Werven
b95c229b4d Fix two typo's: teh -> the, ther -> there. 2000-11-08 12:08:53 +00:00
Hellmuth Michaelis
86bc05b331 Remove unused #include statements
Submitted by:	phk
2000-10-30 14:49:26 +00:00
Hellmuth Michaelis
f33f907ea4 Add infrastructure for Cologne Chip HFC-S PCI driver. 2000-10-26 07:00:05 +00:00
Hellmuth Michaelis
d1dad62933 Add infrastructure for Cologne Chip HFC-S PCI driver.
Increment isdn4bsd step.
2000-10-26 06:58:43 +00:00
Hellmuth Michaelis
065a09a83c Make the software HDLC decoder work again.
Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2000-10-26 06:31:18 +00:00
Hellmuth Michaelis
1c2715d95d Submitted by: Hans Petter Selasky <hselasky@c2i.net>
Remove double 0x7e flags between hdlc-frames.
2000-10-20 11:20:58 +00:00