This has a side effect of eliminating filedesc slock/sunlock during path
lookup, which in turn removes contention vs concurrent modifications to the fd
table.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D23889
The new structure is copy-on-write. With the assumption that path lookups are
significantly more frequent than chdirs and chrooting this is a win.
This provides stable root and jail root vnodes without the need to reference
them on lookup, which in turn means less work on globally shared structures.
Note this also happens to fix a bug where jail vnode was never referenced,
meaning subsequent access on lookup could run into use-after-free.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23884
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Quiet a variety of Wwrite-strings warnings in sys/kern at low-impact
sites. This patch avoids addressing certain others which would need to
plumb const through structure definitions.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23798
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
The arm kernel stack unwinder has apparently never been able to unwind when
the path of execution leads through a kernel module. There was code that
tried to handle modules by looking for the unwind data in them, but it did
so by trying to find symbols which have never existed in arm kernel
modules. That caused the unwind code to panic, and because part of panic
handling calls into the unwind code, that just created a recursion loop.
Locating the unwind data in a loaded module requires accessing the Elf
section headers to find the SHT_ARM_EXIDX section. For preloaded modules
those headers are present in a metadata blob. For dynamically loaded
modules, the headers are present only while the loading is in progress; the
memory is freed once the module is ready to use. For that reason, there is
new code in kern/link_elf.c, wrapped in #ifdef __arm__, to extract the
unwind info while the headers are loaded. The values are saved into new
fields in the linker_file structure which are also conditional on __arm__.
In arm/unwind.c there is new code to locally cache the per-module info
needed to find the unwind tables. The local cache is crafted for lockless
read access, because the unwind code often needs to run in context where
sleeping is not allowed. A large comment block describes the local cache
list, so I won't repeat it all here.
Some best-effort consumers may find trylock behavior for stack(9) symbol
resolution acceptable. Expose that behavior to such consumers.
This API is ugly. If in the future the modules and linker file list locking
is cleaned up such that the linker_files list can be iterated safely without
acquiring a sleepable lock, this API should be removed. However, most of
the time nothing will be holding the linker files lock exclusive and the
acquisition can proceed.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17620
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
A sysctl can have a custom handler that may access data that is initialized
via SYSINIT(9) or via a module event handler (also invoked via SYSINIT).
Thus, it is not safe to allow access to the module's sysctl-s until
the initialization is performed. Likewise, we should not allow access
to teh sysctl-s after the module is uninitialized.
The latter is easy to achieve by properly ordering linker_file_unregister_sysctls
and linker_file_sysuninit.
The former is not as easy for two reasons:
- the initialization may depend on tunables which get set when sysctl-s are
registered, so we need to set the tunables before running sysinit-s
- the initialization may try to dynamically add more sysctl-s under statically
defined sysctl nodes
So, this change splits the sysctl setup into two phases. In the first phase
the sysctl-s are registered as before but they are disabled and hidden from
consumers. In the second phase, done after sysinit-s, normal access to the
sysctl-s is enabled.
The change should affect only dynamic module loading and unloading after
the system boot-up. Nothing changes for sysctl-s compiled into the kernel
and sysctl-s in preloaded modules.
Discussed with: hselasky, ian, jhb
Reviewed by: julian, kib
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D12545
No functional change.
This is handy for FreeBSD derivatives that want to modify the value of
MAXPATHLEN, but not the kld_file_stat ABI.
Submitted by: Siddhant Agarwal <sagarwal AT isilon.com>
Sponsored by: Dell EMC Isilon
The runtime kernel loader, linker_load_file, unloads kernel files that
failed to load all of their modules. For consistency, treat preloaded
(loader.conf loaded) kernel files in the same way.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8200
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
certain kernel structures for use by debuggers. This mostly aids
in examining cores from a kernel without debug symbols as a debugger
can infer these values if debug symbols are available.
One set of variables describes the layout of 'struct linker_file' to
walk the list of loaded kernel modules.
A second set of variables describes the layout of 'struct proc' and
'struct thread' to walk the list of processes in the kernel and the
threads in each process.
The 'pcb_size' variable is used to index into the stoppcbs[] array.
The 'vm_maxuser_address' is used to distinguish kernel virtual addresses
from user addresses. This doesn't have to be perfect, and
'vm_maxuser_address' is a cheap and simple way to differentiate kernel
pointers from simple values like TIDs and PIDs.
While here, annotate the fields in struct pcb used by kgdb on amd64
and i386 to note that their ABI should be preserved. Annotations for
other platforms will be added in the future.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3773
Right now there is a chance that sysctl unregister will cause reader to
block on the sx lock associated with sysctl rmlock, in which case kernels
with debug enabled will panic.
crowded as we now are at about 70k. Bump the limit to 1MB instead
which is still quite a reasonable limit and allows for future growth
of this file and possible future expansion to additional data.
MFC After: 2 weeks
This involves:
1. Have the loader pass the start and size of the .ctors section to the
kernel in 2 new metadata elements.
2. Have the linker backends look for and record the start and size of
the .ctors section in dynamically loaded modules.
3. Have the linker backends call the constructors as part of the final
work of initializing preloaded or dynamically loaded modules.
Note that LLVM appends the priority of the constructors to the name of
the .ctors section. Not so when compiling with GCC. The code currently
works for GCC and not for LLVM.
Submitted by: Dmitry Mikulin <dmitrym@juniper.net>
Obtained from: Juniper Networks, Inc.
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
linker_unload_file() rather than kern_kldload() and kern_kldunload(). This
ensures that the handlers are invoked for files that are loaded/unloaded
automatically as dependencies. Previously, they were only invoked for files
loaded by a user.
As a side effect, the kld_load and kld_unload handlers are now invoked with
the kernel linker lock exclusively held.
Reported by: avg
Reviewed by: jhb
MFC after: 2 weeks
kld_unload event handler which gets invoked after a linker file has been
successfully unloaded. The kld_unload and kld_load event handlers are now
invoked with the shared linker lock held, while kld_unload_try is invoked
with the lock exclusively held.
Convert hwpmc(4) to use these event handlers instead of having
kern_kldload() and kern_kldunload() invoke hwpmc(4) hooks whenever files are
loaded or unloaded. This has no functional effect, but simplifes the linker
code somewhat.
Reviewed by: jhb
linker_init_kernel_modules() and linker_preload() in order to remove most
of the checks for !cold before asserting that the kld lock is held. These
routines are invoked by SYSINIT(9), so there's no harm in them taking the
kld lock.
