Commit Graph

64 Commits

Author SHA1 Message Date
Dag-Erling Smørgrav
87ccef7b77 Instead of recording the Unix time in a process when it starts, record the
uptime.  Where necessary, convert it back to Unix time by adding boottime
to it.  This fixes a potential problem in the accounting code, which would
compute the elapsed time incorrectly if the Unix time was stepped during
the lifetime of the process.
2003-05-01 16:59:23 +00:00
John Baldwin
7e653dbd3b Hold the proc lock across a wider range of fields that it protects. 2003-04-17 22:20:30 +00:00
John Baldwin
2d055ab20f Trim some trailing whitespace. 2003-03-13 23:07:09 +00:00
Tim J. Robbins
27e39ae4d8 Remove the PL_SHAREMOD flag from struct plimit, which could have been
used to share resource limits between rfork threads, but never was.
Removing it makes resource limit locking much simpler -- only the current
process can change the contents of the structure that p_limit points to.
2003-02-20 04:18:42 +00:00
Alfred Perlstein
f97182acf8 unwrap lines made short enough by SCARGS removal 2002-12-14 08:18:06 +00:00
Alfred Perlstein
b80521fee5 remove syscallarg().
Suggested by: peter
2002-12-14 02:07:32 +00:00
Alfred Perlstein
d1e405c5ce SCARGS removal take II. 2002-12-14 01:56:26 +00:00
Alfred Perlstein
bc9e75d7ca Backout removal SCARGS, the code freeze is only "selectively" over. 2002-12-13 22:41:47 +00:00
Alfred Perlstein
0bbe7292e1 Remove SCARGS.
Reviewed by: md5
2002-12-13 22:27:25 +00:00
Bill Fenner
8b5f8b061a Don't hold acct_mtx over limcopy(), since it's unnecessary and
limcopy() can sleep.

Approved by:	re
2002-11-26 18:04:12 +00:00
Giorgos Keramidas
5f9ae8e026 Typo in comment: commmand -> command
Reviewed by:	jhb
2002-11-05 14:54:07 +00:00
Robert Watson
e5e820fd1f Permit MAC policies to instrument the access control decisions for
system accounting configuration and for nfsd server thread attach.
Policies might use this to protect the integrity or confidentiality
of accounting data, limit the ability to turn on or off accounting,
as well as to prevent inappropriately labeled threads from becoming nfs
server threads.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-04 15:13:36 +00:00
Robert Watson
b497ca81d6 Make sure that the accounting credential is saved along with the vp
when accounting is suspended--otherwise when accounting is restored,
we may incorrectly assume the credential is valid.

Panics experienced by:	juli
2002-10-05 20:05:23 +00:00
Robert Watson
289c6dea76 Don't call VOP_LEASE() while holding the accounting mutex. 2002-09-18 01:56:13 +00:00
Andrew R. Reiter
b4dcc46af5 - Fix two obvious locking bugs; 1) returning with lock held when it needed
to be dropped, 2) attempting to lock acct_mtx while already holding it.
  Sorry to those who experienced pain.
- Added two comments referring to two areas in which acct_mtx is held over
  vnode operations that might sleep.  Patch in the works for this.
2002-09-12 05:00:32 +00:00
Andrew R. Reiter
4f39d5d511 - Lock down the accounting code globals with a subsystem mutex.
Reviewed by:	jhb, mdodd
2002-09-11 04:10:41 +00:00
Robert Watson
9ca435893b In order to better support flexible and extensible access control,
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:

- Change fo_read() and fo_write() to accept "active_cred" instead of
  "cred", and change the semantics of consumers of fo_read() and
  fo_write() to pass the active credential of the thread requesting
  an operation rather than the cached file cred.  The cached file
  cred is still available in fo_read() and fo_write() consumers
  via fp->f_cred.  These changes largely in sys_generic.c.

For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:

- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
  pipe_read/write() now authorize MAC using active_cred rather
  than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
  VOP_READ/WRITE() with fp->f_cred

Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred.  Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not.  If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.

Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.

These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.

Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
Robert Watson
2d70161756 Cache the credential provided during accton() for use in later accounting
vnode operations.  This permits the rights of the user (typically root)
used to turn on accounting to be used when writing out accounting entries,
rather than the credentials of the process generating the accounting
record.  This fixes accounting in a number of environments, including
file systems that offer revocation support, MAC environments, some
securelevel scenarios, and in some NFS environments.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2002-08-07 19:30:16 +00:00
Johan Karlsson
5b60674451 Save flags returned by vn_open and use them when calling vn_close.
Reviewed by:    bde
Approved by:    sheldonh (mentor)
2002-07-21 15:22:56 +00:00
Johan Karlsson
92da2e7671 Open accounting file for appending, not general writing.
This allows accton(1) to be used with an append-only file.

PR:		7169
Reported by:	Joao Carlos Mendes Luis <jonny@jonny.eng.br>
Reviewed by:	bde
Approved by:	sheldonh (mentor)
MFC after:	2 weeks
2002-07-10 17:31:58 +00:00
Tom Rhodes
d394511de3 More s/file system/filesystem/g 2002-05-16 21:28:32 +00:00
John Baldwin
16e7bc7b90 - Remove an early KSE diagnostic panic. The thread pointer here is always
curthread.
- We don't need Giant to do suser() checks now, so don't lock Giant until
  after the check.
2002-04-09 19:58:38 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Alfred Perlstein
4d77a549fe Remove __P. 2002-03-19 21:25:46 +00:00
John Baldwin
a854ed9893 Simple p_ucred -> td_ucred changes to start using the per-thread ucred
reference.
2002-02-27 18:32:23 +00:00
Seigo Tanimura
f591779bb5 Lock struct pgrp, session and sigio.
New locks are:

- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.

Please refer to sys/proc.h for the coverage of these locks.

Changes on the pgrp/session interface:

- pgfind() needs the pgrpsess_lock held.

- The caller of enterpgrp() is responsible to allocate a new pgrp and
  session.

- Call enterthispgrp() in order to enter an existing pgrp.

- pgsignal() requires a pgrp lock held.

Reviewed by:	jhb, alfred
Tested on:	cvsup.jp.FreeBSD.org
		(which is a quad-CPU machine running -current)
2002-02-23 11:12:57 +00:00
Robert Watson
fc5d29ef7d o Move suser() calls in kern/ to using suser_xxx() with an explicit
credential selection, rather than reference via a thread or process
  pointer.  This is part of a gradual migration to suser() accepting
  a struct ucred instead of a struct proc, simplifying the reference
  and locking semantics of suser().

Obtained from:	TrustedBSD Project
2001-11-01 20:56:57 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Matthew Dillon
116734c4d1 Pushdown Giant for acct(), kqueue(), kevent(), execve(), fork(),
vfork(), rfork(), jail().
2001-09-01 03:04:31 +00:00
Robert Watson
3c4543e046 o Reduce gratuitous whitespace difference from Darwin. 2001-08-29 17:18:04 +00:00
Robert Watson
b1fc0ec1a7 o Merge contents of struct pcred into struct ucred. Specifically, add the
real uid, saved uid, real gid, and saved gid to ucred, as well as the
  pcred->pc_uidinfo, which was associated with the real uid, only rename
  it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
  corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
  original macro that pointed.
  p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
  p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
  cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
  cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
  we figure out locking and optimizations; generally speaking, this
  means moving to a structure like this:
        newcred = crdup(oldcred);
        ...
        p->p_ucred = newcred;
        crfree(oldcred);
  It's not race-free, but better than nothing.  There are also races
  in sys_process.c, all inter-process authorization, fork, exec, and
  exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
  remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
  use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
  pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
  allocation.
o Clean up ktrcanset() to take into account changes, and move to using
  suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
  calls to better document current behavior.  In a couple of places,
  current behavior is a little questionable and we need to check
  POSIX.1 to make sure it's "right".  More commenting work still
  remains to be done.
o Update credential management calls, such as crfree(), to take into
  account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
      change_euid()
      change_egid()
      change_ruid()
      change_rgid()
      change_svuid()
      change_svgid()
  In each case, the call now acts on a credential not a process, and as
  such no longer requires more complicated process locking/etc.  They
  now assume the caller will do any necessary allocation of an
  exclusive credential reference.  Each is commented to document its
  reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
  and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
  questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
  processes and pcreds.  Note that this authorization, as well as
  CANSIGIO(), needs to be updated to use the p_cansignal() and
  p_cansched() centralized authorization routines, as they currently
  do not take into account some desirable restrictions that are handled
  by the centralized routines, as well as being inconsistent with other
  similar authorization instances.
o Update libkvm to take these changes into account.

Obtained from:	TrustedBSD Project
Reviewed by:	green, bde, jhb, freebsd-arch, freebsd-audit
2001-05-25 16:59:11 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
Greg Lehey
60fb0ce365 Revert consequences of changes to mount.h, part 2.
Requested by:	bde
2001-04-29 02:45:39 +00:00
Greg Lehey
d98dc34f52 Correct #includes to work with fixed sys/mount.h. 2001-04-23 09:05:15 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
John Baldwin
ba88dfc733 Back out proc locking to protect p_ucred for obtaining additional
references along with the actual obtaining of additional references.
2001-01-27 00:01:31 +00:00
John Baldwin
762dba203e - Proc locking.
- Protect calcru() with sched_lock.
2001-01-24 00:28:07 +00:00
Jake Burkholder
4f55983606 Use callout_reset instead of timeout(9). Most callouts are statically
allocated, 2 have been added to struct proc for setitimer and sleep.

Reviewed by:	jhb, jlemon
2000-11-27 22:52:31 +00:00
Kirk McKusick
e6796b67d9 Move the truncation code out of vn_open and into the open system call
after the acquisition of any advisory locks. This fix corrects a case
in which a process tries to open a file with a non-blocking exclusive
lock. Even if it fails to get the lock it would still truncate the
file even though its open failed. With this change, the truncation
is done only after the lock is successfully acquired.

Obtained from:	 BSD/OS
2000-07-04 03:34:11 +00:00
Neil Blakey-Milner
47fdd692c6 Add sysctl descriptions to a few sysctls. Simply "documentation".
PR:		kern/8015
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
2000-06-26 13:52:31 +00:00
Poul-Henning Kamp
2c9b67a8df Remove unneeded #include <vm/vm_zone.h>
Generated by:	src/tools/tools/kerninclude
2000-04-30 18:52:11 +00:00
Eivind Eklund
762e6b856c Introduce NDFREE (and remove VOP_ABORTOP) 1999-12-15 23:02:35 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
23d762834b Fix a dev_t/udev_t issue with accounting. lastcomm now shows the
right tty again.

Submitted by:	"D. Rock" <rock@dead-end.net>
Reviewed by:	phk
1999-07-10 06:27:36 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
David Greenman
b5afad7198 Moved limit frobbing (and the resulting limcopy()) that occurs for
accounting to the accounting function so that this isn't needlessly
done for some process exits.
Reviewed by:	bde,phk
1998-06-05 21:44:20 +00:00
Poul-Henning Kamp
cb226aaa62 Move the "retval" (3rd) parameter from all syscall functions and put
it in struct proc instead.

This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.

I have not removed the /*ARGSUSED*/, they will require some looking at.

libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
1997-11-06 19:29:57 +00:00
Justin T. Gibbs
ab36c06737 init_main.c subr_autoconf.c:
Add support for "interrupt driven configuration hooks".
	A component of the kernel can register a hook, most likely
	during auto-configuration, and receive a callback once
	interrupt services are available.  This callback will occur before
	the root and dump devices are configured, so the configuration
	task can affect the selection of those two devices or complete
	any tasks that need to be performed prior to launching init.
	System boot is posponed so long as a hook is registered.  The
	hook owner is responsible for removing the hook once their task
	is complete or the system boot can continue.

kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c:
	Change the interface and implementation for the kernel callout
	service.  The new implemntaion is based on the work of
	Adam M. Costello and George Varghese, published in a technical
	report entitled "Redesigning the BSD Callout and Timer Facilities".
	The interface used in FreeBSD is a little different than the one
	outlined in the paper.  The new function prototypes are:

	struct callout_handle timeout(void (*func)(void *),
				      void *arg, int ticks);

	void untimeout(void (*func)(void *), void *arg,
		       struct callout_handle handle);

	If a client wishes to remove a timeout, it must store the
	callout_handle returned by timeout and pass it to untimeout.

	The new implementation gives 0(1) insert and removal of callouts
	making this interface scale well even for applications that
	keep 100s of callouts outstanding.

	See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
Bruce Evans
e4ba6a82b0 Removed unused #includes. 1997-09-02 20:06:59 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00