The previous change to CGSIZE had the unintended side-effect of allowing
newfs and makefs to create file systems that would fail validation when
examined by older commands and kernels, by allowing newfs/makefs to pack
slightly more blocks into a CG than those older binaries think is valid.
Fix this by having newfs/makefs artificially restrict the number of blocks
in a CG to the slightly smaller value that those older binaries will accept.
The validation code will continue to accept the slightly larger value
that the current newfs/makefs (before this change) could create.
Fixes: 0a6e34e950
Reviewed by: mckusick
MFC after: 3 days
Sponsored by: Netflix
The cylinder group header structure ended with `u_int8_t cg_space[1]'
representing the beginning of the inode bitmap array. Some architectures
like the i386 rounded this up to a 4-byte boundry while other
architectures like the amd64 rounded it up to an 8-byte boundry.
Thus sizeof(struct cg) was four bytes bigger on an amd64 machine
than on an i386 machine. If a filesystem created on an i386 machine
was moved to an amd64 machine, the size of the cylinder group
calculated by the CGSIZE macro would appear to grow by four bytes.
Filesystems whose cylinder groups were exactly equal to the block
size on an i386 machine would appear to have a cylinder group that
was four bytes too big when moved to an amd64 machine. Note that
although the structure appears to be too big, it in fact is fine.
It is just the calaculation of its size that is in error.
The fix is to remove the cg_space element from the cylinder-group
structure so that the calculated size of the structure is the same
size on all architectures.
Reported by: Tijl Coosemans
Tested by: Tijl Coosemans and Peter Holm
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Add Makefile.depend.options to libnetbsd, mkimg and makefs
to ensure libegacy is build if needed.
targets/pseudo/stage/Makefile avoid the need for mtree
the staging process creates target dirs as needed anyway.
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39757
DOT and DOTDOT entries have special handling, and previously only Rock
Ridge PX (POSIX attributes) entries were attached. Add TF (timestamp)
entries as well.
PR: 203531
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39662
For diff reduction against NetBSD's makefs. Based on NetBSD git mirror
commit 00991aee8248.
With this change our makefs cd9660 support should be in sync up to
NetBSD commit bdae6c9dc792 ("makefs(8): Nix trailing whitespace.").
Sponsored by: The FreeBSD Foundation
This matches NetBSD and rationalizes makefs with the kernel API.
This reverts commit 370e009188.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
Obtained from: NetBSD 0a62dad69f62, 0c4125e1a19f, cb6a5a3575fd
Differential Revision: https://reviews.freebsd.org/D39070
Makefs defined "follow-symlinks" and "help" options, but they did
nothing. Remove them.
Obtained from: OpenBSD a8f1645688c2
Sponsored by: The FreeBSD Foundation
Move date setting into cd9660_populate_iso_dir_record so there is no
path that leaves it unset.
PR: 203531
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39258
It was used only in constructing the host path that contains file
content, which is not related to anything CD9660-specific. PATH_MAX is
the appropriate limit. See OpenBSD commit 299d8950f319.
Obtained from: OpenBSD
Sponsored by: The FreeBSD Foundation
NetBSD defines these in sys/bootblock.h, which we don't have. Add local
defintions in cd9660_eltorito.c (as OpenBSD did) to reduce diffs between
the three makefs implementations.
Obtained from: OpenBSD
Sponsored by: The FreeBSD Foundation
getopt(3) returns '?' when it encounters a flag not present in the in
the optstring or if a flag is missing its option argument. We can
handle this case with the "default" failure case with no loss of
legibility.
Obtained from: OpenBSD makefs.c 1.22
We previously attempted to emit Rock Ridge NM records only when the name
represented by the Rock Ridge extensions would actually differ. We would
omit the record for an all-upper-case directory name, however Linux (and
perhaps other operating systems) map names with no NM record to
lowercase.
This affected only directories, as file names have an implicit ";1"
version number appended and thus always differ. To solve, just emit NM
records for all entries other than DOT and DOTDOT .
We could continue to omit the NM record for directories that would avoid
mapping (for example, one named 1234.567) but this does not seem worth
the complexity.
PR: 203531
Reported by: Thomas Schmitt <scdbackup@gmx.net
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39258
The boot catalog pointer is a DWord, but we previously populated it via
cd9660_bothendian_dword which overwrote four unused bytes following it.
See El Torito 1.0 (1995) Figure 7 for details.
PR: 203531
Reported by: Coverity Scan
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: kevans
CID: 977470
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39231
These are not actually used by makefs (yet), but ought to match the
spec.
See RRIP 4.1.4 Description of the "NM" System Use Entry for details.
PR: 203531
Sponsored by: The FreeBSD Foundation
The bit definitions for the TF_* timestamp bits (TF_MODIFY, etc.) were
incorrect, and timestamps were written in the wrong order.
See RRIP 4.1.6 Description of the "TF" System Use Entry for details.
PR: 203531
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: jrtc27, kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39221
If bread returns an error there is no bp to brelse. One of these
changes was taken from NetBSD commit 0a62dad69f62 ("This works well
enough to populate..."), the rest were found by looking for the same
pattern.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39069
Add missing brelse(bp). Without it the cache grows and we have a n^2
lookup. I'm not entirely sure why we read the block before we write it
back out, since the only side effect of that is to allocate memory,
clear the memory, read it in from disk, throw it away with the contents
of the file being written out. We likely should just do a getblk() here
instead, but even with all that, this takes the time it takes to create
a 150MB msdos fs image down from 5 minutes to 30 seconds.
Old: 317.663u 0.685s 5:18.34 100.0% 198+360k 0+19io 1009pf+0w
New: 7.330u 23.841s 0:31.17 100.0% 198+360k 0+250522io 4pf+0w
See code review for how we got this. tl;dr: netbsd move brelse
into bwrite and we picked up msdos code after that, but not the
move. That change should be picked up later.
Sponsored by: Netflix
Reviewed by: emaste
MFC After: 1 day (13.2 is coming fast)
Differential Revision: https://reviews.freebsd.org/D39025
If a type=dir entry exists and all contents are directories, files
added with contents=, or symlinks with link= attributes then it doesn't
need to exist. Just let openat fail in that case. It's conceivable
this will make debugging some cases weird, but it's sufficent to handle
the way we add /root/.ssh in CheriBSD VM images.
This is a recommit of 794154149f with
bugfixes.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D38029
If a type=dir entry exists and all contents are directories, files
added with contents=, or symlinks with link= attributes then it doesn't
need to exist. Just let openat fail in that case. It's conceivable
this will make debugging some cases weird, but it's sufficent to handle
the way we add /root/.ssh in CheriBSD VM images.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D38029
When a link target is specified use it rather than attempting to read
a potentially non-existant file.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D38028
Commit d7eec79b70 overlooked the fact that
nvlist_find(DATA_TYPE_STRING) does not provide a nul-terminated string.
Fix the leak a different way.
Fixes: d7eec79b70 ("makefs: Plug a memory leak")
nvlist_find_string() would return a copy of the found value, but callers
assumed they would have to make their own copy. It's simpler to change
nvlist_find_string() than it is to change callers, so do that.
Reported by: Coverity
This adds missing includes, uses the standard dirent.h rather than the
BSD-specific sys/dirent.h subset (which works on macOS but not Linux)
and works around Linux's lack of st_birthtim.
This allows usr.sbin/makefs to be added to LOCAL_XTOOL_DIRS again on
macOS and Linux so that disk images can be cross-built.
Reviewed by: markj
Fixes: 240afd8c1f ("makefs: Add ZFS support")
Differential Revision: https://reviews.freebsd.org/D36135
