Commit Graph

44 Commits

Author SHA1 Message Date
Rafal Jaworowski
db5ef4fc77 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Rui Paulo
381a19cce0 Add support for Cavium Econa CNS11XX ARM boards. These boards were
previously know by StarSemi STR9104.

Tested by the submitter on an Emprex NSD-100 board.

Submitted by:	Yohanes Nugroho <yohanes at gmail.com>
Reviewed by:	freebsd-arm, stas
Obtained from:	//depot/projects/str91xx/...
2010-01-04 03:35:45 +00:00
Rafal Jaworowski
bc54686d20 Rename Marvell ARM CPU specific file according to r186933. 2009-01-09 10:55:33 +00:00
Sam Leffler
59514054b1 enable use of modules but disable them by adding MODULES_OVERRIDE=""
in each config file until we can sort out issues in the modules tree

Reviewed by:	imp
MFC after:	1 month
2008-11-30 17:53:19 +00:00
Rafal Jaworowski
373bbe25ff Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00
Olivier Houchard
ae33434c7f We need -I$S to compile the elf trampoline.
MFC after:	3 days
2008-08-04 14:38:38 +00:00
Warner Losh
8d3e1f8f7a If you build a compiler with TARGET_BIG_ENDIAN, and then try to build
a little endian kernel, things break.  Be explicit about the endian
choice by setting it in the little endian case as well.
2008-04-04 19:33:09 +00:00
Rafal Jaworowski
367bbd3833 Make kernel.tramp build properly on ARM9E.
Reviewed by:	imp
Approved by:	cognet (mentor)
2008-04-04 17:35:24 +00:00
Warner Losh
ecf899b423 Always build kernel.tramp. This should be helpful for a lot of
people, as well making sure it doesn't break.
2008-04-03 20:42:36 +00:00
Rafal Jaworowski
fcfdd827d0 Introduce a standalone shell script for embedding MFS image.
This allows to fix a problem with ARM kernel.bin not having the MFS image
embedded: it is objcopied from the kernel.noheader temporary ELF file, which
was not subject to embedding the MFS image previously.

Reviewed by:	imp
Approved by:	cognet (mentor)
2008-02-05 10:46:30 +00:00
Olivier Houchard
23f9626539 Bring in two bandaids to get the elf trampoline to work again, until I find
a proper solution.
- Add a dummy entry point which just calls the C entry points, and try to make
sure it's the first code in the binary.
- Copy a bit more than func_end to try to copy the whole load_kernel()
function. gcc4 puts code behind the func_end symbol.

Approved by:	re (blanket)
2007-07-27 14:42:25 +00:00
Wojciech A. Koszek
332fd25c96 Revert config(8) version bump. It brings major pain for people working on
different versions of FreeBSD source tree.

Old config(8) can now be used unless you want to use INCLUDE_CONFIG_FILE
option.

Approved by:	imp
Reviewed by:	imp
2007-05-16 17:23:54 +00:00
Wojciech A. Koszek
9e2f7513e1 Bump config(8) version and build requirement for config(8) to 600006. This
is caused by my latest changes to config(8). You're supposed to install new
config(8) in order to prevent yourself from seeing a warning about old
version of that tool.

You should configure the kernel with a new config(8) then.

Oked by:	rwatson, cognet (mentor)
2007-05-13 02:36:41 +00:00
Olivier Houchard
2371afbf82 Only use -mno-apcs-frame if DDB is not in the kernel, as it prevent the
backtraces from working.

MFC After:	3 days
2006-07-24 22:09:47 +00:00
Olivier Houchard
f079562c41 Add -EB to ${LD} too if we're making a big endian kernel, not anything in
kernel makefiles uses SYSTEM_LD.
2006-07-18 21:16:39 +00:00
Olivier Houchard
08459723d8 Make sure the stack is properly aligned.
Enable the MMU when relocating as well, and use write-through cache.
2006-06-18 22:46:30 +00:00
Olivier Houchard
ee8ecea34b MFp4:
- Try hard to calculate a safe sp, so that the stack doesn't get smashed
while uncompressing or relocating the kernel.
- Bring in code needed to calculate the cacheline size etc, needed for
arm9_idcache_wbinv_all.
2006-06-12 22:58:50 +00:00
Olivier Houchard
b64b87c8bd To avoid problems, invalidate the data cache and disable the MMU once
we're done uncompressing the kernel.
2006-05-30 21:13:47 +00:00
Olivier Houchard
8f2937b824 Erm don't use -mno-apcs-frame if we're going to do profiling either, it's not
exactly compatible.
2006-03-27 00:32:46 +00:00
Olivier Houchard
0e187240e1 Build a minimal pagetables, with only section mappings, mapped write through,
to speed up the decompression.
2006-01-20 00:46:44 +00:00
Olivier Houchard
b861e5bd43 Rather than appending it at the end of the kernel build process, give the
ELF trampoline build its own target, "trampoline".
It makes it possible to construct a bootable gzipped kernel without having
to build in the same process.
2005-12-20 20:57:20 +00:00
Olivier Houchard
fe516e3c17 Make the elf trampoline disable the MMU, and link it at physical address,
to avoid bad surprises.
2005-12-20 01:28:17 +00:00
Olivier Houchard
d0cd9702ef Teach the elf trampoline how to deal with gzipped kernels. 2005-12-05 12:55:46 +00:00
Warner Losh
9fe342e741 Version 600004 is better than 700000 given other changes that are in
the pipeline.  We had to bump the version for 600004 because the old
parser got confused and generated bogus output.

Approved by: ru@
2005-11-28 17:51:31 +00:00
Ruslan Ermilov
a8e06f2a52 Make config(8) understand ORed dependecies in "files*" and
improve tracking of known devices.  Bump config(8) version.
2005-11-27 21:41:58 +00:00
Olivier Houchard
19ddaa6566 Use the correct file name for the ldscript. 2005-11-25 03:30:45 +00:00
Olivier Houchard
f5a9ac9ca4 Create a non-elf pure binary version of the kernel as well. 2005-11-24 02:25:49 +00:00
Olivier Houchard
fe0085433b Make the elf wrapper work with recent kernel.debug changes. 2005-11-17 01:32:01 +00:00
Warner Losh
05b5ca733b We don't bump the config version for additions to config that aren't
used in the base system.  This has been much discussed in the past
(typically people giving me a hard time for it).  Since all that was
added to config was nocpu, and since we don't use it, we don't need to
bump the version.
2005-11-04 04:14:49 +00:00
Ruslan Ermilov
acd58322c7 Implement the "nocpu" directive.
Requested by:	rwatson
2005-11-03 14:01:22 +00:00
John Baldwin
b34b3c19c6 Bump config(8) version for the DEFAULTS change. 2005-10-27 19:27:55 +00:00
Olivier Houchard
f33ffa4a6c Strip the $a, $t and $d symbols if we're using DDB. There are useless and
confusing in a backtrace.
2005-10-17 18:31:37 +00:00
Olivier Houchard
fe7336292d Really detect if DDB is enabled.
Remove kernel.tramp if it exists on make clean.
2005-10-04 14:38:55 +00:00
Olivier Houchard
7141c0d343 Makefile magic for the ELF trampoline. 2005-10-03 14:09:58 +00:00
Olivier Houchard
63825b2f74 Use -mno-apcs-frame if DEBUG isn't defined.
Approved by:	re (blanket)
2005-06-27 14:33:32 +00:00
Warner Losh
23804f1a7d Never hardcode /sys into these Makefiles. The proper way to spell it is $S.
Also, move the -I stuff to the centralized kern.pre.mk.  However, it
might be better to add these flags to files.conf.  This is a short
term fix to fix the broken builds on my machine (I don't have a valid
/sys link).
2005-04-13 14:49:57 +00:00
Vinod Kashyap
f0c1dee27f The latest release of the FreeBSD driver (twa) for
3ware's 9xxx series controllers.  This corresponds to
the 9.2 release (for FreeBSD 5.2.1) on the 3ware website.

Highlights of this release are:

1. The driver has been re-architected to use a "Common Layer"
    (all tw_cl* files), which is a consolidation of all OS-independent
    parts of the driver.  The FreeBSD OS specific portions of the
    driver go into an "OS Layer" (all tw_osl* files).
    This re-architecture is to achieve better maintainability, consistency
    of behavior across OS's, and better portability to new OS's (drivers
    for new OS's can be written by just adding an OS Layer that's specific
    to the OS, by complying to a "Common Layer Programming Interface" API.

2. The driver takes advantage of multiple processors.

3. The driver has a new firmware image bundled, the new features of which
   include Online Capacity Expansion and multi-lun support, among others.
   More details about 3ware's 9.2 release can be found here:
   http://www.3ware.com/download/Escalade9000Series/9.2/9.2_Release_Notes_Web.pdf

Since the Common Layer is used across OS's, the FreeBSD specific include
path for header files (/sys/dev/twa) is not part of the #include pre-processor
directive in any of the source files.  For being able to integrate twa into
the kernel despite this, Makefile.<arch> has been changed to add the include
path to CFLAGS.

Reviewed by: scottl
2005-04-12 22:07:11 +00:00
Warner Losh
5abe8537a0 Update version number for latest config version bump 2005-04-01 22:56:10 +00:00
John-Mark Gurney
f80d282814 bump the Makefile config versions now that config is 600001...
Forgotten by:	des
2005-02-10 21:15:31 +00:00
Olivier Houchard
949bf67b27 Add a new make option, ARM_BIG_ENDIAN, to compile big endian kernels. 2005-01-19 16:43:43 +00:00
Ruslan Ermilov
a35d88931c For variables that are only checked with defined(), don't provide
any fake value.
2004-10-24 15:33:08 +00:00
Olivier Houchard
332d16a165 Add the possibility to specify the kernel virtual address and the kernel
physical address in the kernel config file, as it varies from CPU to CPU.
2004-09-23 22:47:57 +00:00
Peter Wemm
f37a929ca1 Kill count device support from config. I've changed the last few
remaining consumers to have the count passed as an option.  This is
i4b, pc98/wdc, and coda.

Bump configvers.h from 500013 to 600000.

Remove heuristics that tried to parse "device ed5" as 5 units of the ed
device.  This broke things like the snd_emu10k1 device, which required
quotes to make it parse right.  The no-longer-needed quotes have been
removed from NOTES, GENERIC etc.  eg, I've removed the quotes from:
   device  snd_maestro
   device  "snd_maestro3"
   device  snd_mss

I believe everything will still compile and work after this.
2004-08-30 23:03:58 +00:00
Olivier Houchard
78b36e3ca5 Add config magic for arm. 2004-05-14 11:49:40 +00:00