This is a subset of what's in the linux 802.11ac implementation.
I've verified that the bits that mention an 802.11ac draft are
still the same in 802.11ac-2013 and noted it accordingly.
This is for the most part one big no-op.
Obtained from: 802.11ac-2013.pdf
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
This allows some simplification of its callers. No functional change
intended.
Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month
pointer isn't NULL, it is safe, because we are handling IPV6_PKTINFO
socket option in this block of code. Also, use in6ifa_withaddr() instead
of ifa_withaddr().
We changed the ABI for ARM in 10, an removed support for the old ABI in 11,
as such binaries from these releases are unable to be run on a head kernel.
Reviewed by: bz, emast
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5652
Figure out if the chip is counting PAUSE frames in the "normal" stats
and take them out if it is. This fixes a bug in the tx stats because
the default hardware behavior is different for Tx and Rx but the driver
was treating both the same way. The result was that OPACKETS, OBYTES,
and OMCASTS were under-reported (if tx_pause > 0) before this change.
Note that the mac_stats sysctl still gives you the raw value of these
statistics straight from the device registers.
during argument validity verification, unbound zero'ing of the process LDT
and adjacent memory can be initiated from usermode.
Submitted by: CORE Security
Patch by: kib
Security: SA-16:15
r296861 addressed a build failure due to undefined SYS_freebsd6_lseek
by adding a COMPAT_FREEBSD6 conditional, but we do not support FreeBSD 6
compatibility on armeb anyway so remove it completely.
Reviewed by: andrew, bz
Differential Revision: https://reviews.freebsd.org/D5643
the ABI in 10.0, and have removed support for the old ABI in 11. As such
any of these options to provide compatibility prior to 10 are unneeded.
Sponsored by: ABT Systems Ltd
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.
Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add proper asserts to the SYSCTL_COUNTER_U64_ARRAY() macro that checks
the size of the first element of the array.
- Add an example to the counter(9) manual page how to use the
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add some missing symbolic links for counter(9) while at it.
When we guess the nature of the outbound packet (output vs. forwarding) we need
to take bridges into account. When bridging the input interface does not match
the output interface, but we're not forwarding. Similarly, it's possible for the
interface to actually be the bridge interface itself (and not a member interface).
PR: 202351
MFC after: 2 weeks
This is several year's worth of fail point upgrades done at EMC Isilon. They
are interdependent enough that it makes sense to put a single diff up for them.
Primarily, we added:
- Changing all mainline execution paths to be lockless, which lets us use fail
points in more sleep-sensitive areas, and allows more parallel execution
- A number of additional commands, including 'pause' that lets us do some
interesting deterministic repros of race conditions
- The ability to dump the stacks of all threads sleeping on a fail point
- A number of other API changes to allow marking up the fail point's context in
the code, and firing callbacks before and after execution
- A man page update
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: cem (earlier version), jhb, kib, pho
With feedback from: bdrewery
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5427
* Implement a new ratectl method, which defaults to returning nothing;
* Add a top level sysctl (net.wlan.X.rate_stats) to extract it;
* Add ratectl info for the 'amrr' module.
Tested:
* urtwn(4), STA mode
Differential Revision: https://reviews.freebsd.org/D5630
Prevent ixgbe outputting "Invalid advertised speed" warning on boot with
no customisations by moving test from sysctl handler to set handler.
PR: 208022
MFC after: 3 days
Sponsored by: Multiplay
Use the Toeplitz hash value as source for the flowid. This makes the
hash value more suitable for so-called hash bucket algorithms which
are used in the FreeBSD's TCP/IP stack when RSS is enabled.
Sponsored by: Mellanox Technologies
MFC after: 1 week
ipoib module.
The bpfdetach() function is trying to turn off promiscious mode on the
network interface it is attached to while holding a mutex. The fix
consists of ignoring any further calls to the ipoib_ioctl() function
when the network interface is going to be detached. The ipoib_ioctl()
function might sleep.
Sponsored by: Mellanox Technologies
MFC after: 1 week
non-multiple of 64 bytes. Thereafter, the user state save area is
misaligned, which triggers assertion in the debugging kernels, or
segmentation violation on accesses for non-debugging configs.
Force the desired alignment of the user save area as the fix
(workaround is to disable bit 9 in the hw.xsave_mask loader tunable).
This correction is required for booting on the upcoming Intel' Purley
platform.
Reported and tested by: "Pieper, Jeffrey E" <jeffrey.e.pieper@intel.com>,
jimharris
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
support frameworks (i.e. clk/regulators/tsensors/fuses...).
It provides simple unified consumers interface for manipulations with
phy (USB/SATA/PCIe) resources.
support frameworks(i.e. clk/reset/phy/tsensors/fuses...).
The framework is still far from perfect and probably doesn't have stable
interface yet, but we want to start testing it on more real boards and
different architectures.
Keymap header files have historically been generated using the build
host's /usr/sbin/kbdcontrol and using the host's keymap files.
However, that introduces an issue when building a kernel to use vt(4)
on a system using sc(4), or vice versa: kbdcontrol searches for keymap
files in the /usr/share subdirectory appropriate for the host, not the
target.
With this change the build searches both the and sc keymap directories
from the source tree.
PR: 193865
Submitted by: Harald Schmalzbauer
