Commit Graph

256 Commits

Author SHA1 Message Date
Takanori Watanabe
7850154fdd Add ALLIED TELESIS,K.K. LA-ISA V2 ISA PnP ID.
Submitted by:	nork
MFC after: 3 days
2002-07-26 17:33:58 +00:00
Warner Losh
11b0ee113b integrate from p4 repo:
o Honor NE2000DVF_{AX88190,DL10019} flags by setting the ED_FLAGS_xxxx
  flag.
o Mark linksys combo_ecard as ax88190
o Set the type_str to AX88190 for the ax88190 cards.

This fixes ax88190 based cards, for the most part, but doesn't seem to fix
the mii based dl10019 cards (aka linksys cards).
2002-07-22 21:28:46 +00:00
Warner Losh
990fa6b68a More newcard devices:
Netgear FA-410TXC
	Netgear FA-411
	Lantech Fastnet TX
	Linksys pcm100
Hide the total wildcard device for SVEC too :-(

Obtained from: NetBSD/OpenBSD
2002-04-02 05:52:52 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
2781c18f63 Add EDIMAX ethernet card for NEWCARD from NetBSD 2002-01-29 07:08:56 +00:00
Warner Losh
5c8fcbc866 Patch to allow the ed driver interrupt routine to terminate if the
card is ejected while we're in this routine.

yamamoto-san's original patch had a small race window for AX88190
chips, which I corrected by limiting the number of iterations we'd try
to reset the bits to be about 15ms rather than forever.  This seems to
work for me, but I don't have a large collections of cards based on
this chipset.

Submitted by:	YAMAMOTO Shigeru
2001-11-24 16:15:18 +00:00
Warner Losh
67bac73ca9 Comment out some bogus entries. somehow they match everything, which
is bad.  I need to correct pccarddev, but I'm not sure how just at the
moment.  So I'm firewalling the damage.
2001-11-20 06:18:36 +00:00
Warner Losh
45c2a3ca28 MF NetBSD's if_ne_pcmcia.c rev 1.82's list of devices 2001-11-15 08:15:44 +00:00
Warner Losh
9de4df498c Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
Warner Losh
269b3a8211 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
Luigi Rizzo
7b109fa404 MFS: sync the ipfw/dummynet/bridge code with the one recently merged
into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
Luigi Rizzo
5c514284de Always compile in bridge hooks, or this code will not work (efficiently) with
the loadable bridge module.
2001-11-01 17:10:52 +00:00
Jeroen Ruigrok van der Werven
2a01978a07 Fix obvious bug where return from probe was botched.
People with HP PCLAN+ NICs can now happily use the card again

PR:		21087
Submitted by:	M. B. Buchanan <buchanan@orbitworld.net>
2001-10-31 19:43:33 +00:00
Luigi Rizzo
06bd2f9c81 Make this compile again after the changes to make bridge kld'able 2001-10-07 00:18:48 +00:00
Ian Dowse
9b04180c2c Add an option ED_NO_MIIBUS, which causes the `ed' driver to be
built without support for miibus PHYs. Most ed cards don't need
miibus support, so it's useful to be able to avoid the bloat of
all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
Ian Dowse
071dbcd2cc Add a few missing spl calls in preparation for an MFC of the miibus
support.
2001-07-22 21:39:54 +00:00
Ian Dowse
2cc42e154e Remove an old hack that remembered if the card type was Linksys by
storing a flag in the global variable 'linksys' during the probe
routine and reading it during the attach routine. We now have the
ED_VENDOR_LINKSYS vendor code stored in sc->vendor, so check that
instead.
2001-07-22 21:31:44 +00:00
Ian Dowse
dc53090488 Attach the miibus for Linksys/Dlink cards from the attach routine,
not from the probe routine. This was an oversight when I originally
ported the miibus support to -current, though it was mostly harmless.

We now set the vendor code to the new value ED_VENDOR_LINKSYS in
ed_pccard_Linksys() at probe time. Then ed_pccard_attach() checks
the vendor code, and sets up the miibus if appropriate.

Reviewed by:	imp
2001-07-22 18:58:44 +00:00
Warner Losh
f2fdbb57ca Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
Luigi Rizzo
b8987738cf Whoops... forgotten a few pieces in previous patch:
* a ">" is really ">=" ;
 * do not try to fetch zero-sized blocks from the card;
 * make sure that bpf gets the packets it wants even with
   bridging active;
2001-02-08 22:54:57 +00:00
Luigi Rizzo
338cdb139b Make sure that we do not accept packets shorter than a full ethernet
header, or we would have a negative length passed to ether_input().
2001-02-08 22:21:30 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Jeroen Ruigrok van der Werven
f09deb6962 Fix typo: wierd -> weird.
There is no such thing as wierd in the english language.
2001-02-06 09:25:10 +00:00
Poul-Henning Kamp
37d4006626 Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
Warner Losh
012b895034 Add a bunch of entries from NetBSD's if_ne_pcmcia.c v1.67. We still
need to verify that all the entries in pccard.conf are present in this
table.
2001-01-21 08:20:23 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Warner Losh
cc9e9343cd Minor newbus/style(9) cleanups.
o Move the ax88190 code to its own function.
o Move all device_method_t, driver_t and DRIVER_MODULE definitions to the
  end of files.
o Wrap a few lines > 80 characters.
o Use the same devclass for all ed drivers.  This allows machines with
  multiple types of cards to have their cards numbered correctly.  Before,
  you could wind up with two ed0's.
o Protect if_edvar.h from multiple includes because I was there.
2000-12-26 06:38:04 +00:00
Toshihiko ARAI
eb13a47275 Fix my previous commit. Remove ed_get_Linksys() function prototypes. 2000-12-20 17:10:28 +00:00
Toshihiko ARAI
d556784aa3 Linksys Fast Ethernet PCCARD cards supported by the ed driver now
require the addition of flag 0x80000 to their config line in
pccard.conf(5).  This flag is not optional.  These Linksys cards will
not be recognized without it.

Reviewed by:    imp, iwasaki
2000-12-18 15:28:53 +00:00
Warner Losh
95b2cbbc17 Call ed_probe_Novel in the AX88190 case as well.
Remove stary blank line.

Submitted by:	Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp>
2000-12-17 18:15:15 +00:00
Warner Losh
727928f866 Remove unnecessary includes found by phk's script. I've been building
these locally for ages.
2000-12-13 06:28:37 +00:00
Warner Losh
3a68d6087a Fix problem with ax88190 based cards trying to probe further after
matching the ax88190.
2000-12-13 06:27:23 +00:00
Peter Wemm
5e12cd9b80 Argh, I have fixed this cut/paste error twice before. I must have
committed the wrong patch. :-(  sn_pccard_products[] should have
been static anyway.
2000-11-25 07:25:08 +00:00
Peter Wemm
b3d39a56ae Update the ed driver to probe and attach under a NEWCARD kernel (I was
using a cardbus based system with pccbb providing the pcic interface).
Something isn't quite right.. when the driver allocates and activates
its resources, the IO space that was requested reads as all zeros (versus
the original 0xff's as it normally is when there is no device responding).

Also, deactivate the resources before releasing them.  OLDCARD doesn't
seem to care but NEWCARD/CARDBUS get rather unhappy if you release
a resource that hasn't been deactivated yet.

Make pcic_p.c only compile with oldcard kernels.
2000-11-25 03:36:09 +00:00
Mike Smith
1b97a6c6a9 Network modules are all "if_foo" not "foo". Avoid the confusing spew that
ensues when ifconfig tries to load if_ed.ko when it's already in the kernel.
2000-10-15 20:23:27 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Seigo Tanimura
0593938b26 Allocate memory resource to access the attribute memory of a card.
Reviewed by:	imp
2000-09-25 06:01:42 +00:00
Paul Saab
6004db96ae Move the detection of Linksys PCMCIA cards from attach to probe.
This should solve the problems people were seeing with this driver.

Reported by:	phk & others.
2000-09-12 11:03:12 +00:00
Yoshihiro Takahashi
82583dd564 - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00
Seigo Tanimura
8f4fec9c36 Newbusify ed driver.
Partly submitted by:	alex
2000-08-14 04:31:07 +00:00
Seigo Tanimura
eecdc4415b MFPAO: Add support for AX88190, equipped in MELCO LPC3-TX. 2000-07-23 15:15:43 +00:00
Poul-Henning Kamp
f8fc6141fb Fix the IRQ9/IRQ2 confusion.
Submitted by:	Alan Clegg <abc@bsdi.com>
2000-07-18 18:50:24 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Paul Saab
898e18b849 Only try to detect Linksys PCMCIA cards when we are in a pccard
environment.  This fixes the breakage to ISA ethernet cards.

Reviewed by:	peter
2000-06-29 07:31:37 +00:00
Paul Saab
9e672f19b5 Allow newer Linksys 10/100 PCMCIA cards to work.
Reviewed by:	imp
2000-06-18 05:50:16 +00:00
Poul-Henning Kamp
855e8bb9ad ed_ioctl() can be called from ifpromisc() after the card has been removed,
don't panic on a NULL pointer in that case.
2000-06-01 21:55:49 +00:00
Archie Cobbs
2e2de7f23f Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Warner Losh
16ec9f077e sanpai-san (sanpai@sanpai.org) suggested that we put the novel probe
first.  This will fix a few cards that hang on the WD probe.  He tells
me that PAO went one step farther and removed the WD proble completely
and none of the cards in the 2.x database broke in PAO3.  Since I'm
more conservative in this code, I'm just swapping the order, which he
said also fixed his problem.

Reviewed by: mdodd, iwasaki
Submitted by: sanpai@sanpai.org
2000-04-28 05:01:35 +00:00