completion events can be moderated in the same way like RX completion
events. Expose this functionality by a sysctl variable.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4409
Set the port MTU and then query it and report if any problems instead.
MFC after: 1 week
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4408
make. Add support for generating powerpc64 qemu images. We
can generate them, but there's something wrong booting them.
This also simplifies the user config files a bit, and removes
bits no longer true.
TLV routines use 'uint8_t *', NVRAM code uses caddr_t. Just cast to
required type to fix the warning.
Required to build with -Werror=pointer-signg.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4391
The header is not present on FreeBSD, but exists on OmniOS where sfxge
common code is used as well.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4390
It is better do not mix TxQ creation and receive event flags since only
checksum flags are applicable to TxQ.
Also it will allow to add a new TxQ creation specific flags.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4389
When writing the MUM firmware the chunk size must be equal to the erase
size.
Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4388
Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4387
kyua 0.11's version of report-junit was rendering non-printable characters
Upgrade to kyua 0.12 to obtain a fixed version of the command
Output verified with python 2.7.10's xml.dom.minidom module
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
nanobsd. implement support for NanoBSD touching a file (and possibly
recording that fact) as well as replacing a directory with a symlink.
Also specify the default uname and gname for files and use that as a
/set command at the top of the generated METALOG file.
iscsi's shutdown_pre_sync prio was SHUTDOWN_PRI_FIRST which caused it to
run before other high priority handlers such as filesystems e.g. ZFS.
This meant the iscsi sessions where removed before the ZFS geom consumer
was closed, resulting in a panic from g_access calls on debug kernels
due to negative acr.
Instead use the same as the old iscsi_initiator SHUTDOWN_PRI_DEFAULT-1
which allows it to run before dashutdown etc but after filesystems.
MFC after: 2 weeks
Sponsored by: Multiplay
On vm_page_rename failure, fix a missing object unlock and a double free of
a page.
First remove the old page, then rename into other page into first_object,
then free the old page. This avoids the problem on rename failure. This is
a little ugly but seems to be the most straightforward solution.
Tested with:
$ sysctl debug.fail_point.uma_zalloc_arg="1%return"
$ kyua test -k /usr/tests/sys/Kyuafile
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: kib
Seen by: alc
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4326
Typical TLBs have 40-512 entries available. At some point, iterating
every single page in a requested invalidation range and issuing invlpg
on it is more expensive than flushing the TLB and allowing it to reload
on demand.
Broadwell CPUs have 1536 L2 TLB entries, so I've picked the arbitrary
number 4096 entries as a hueristic at which point we flush TLB rather
than invalidating every single potential page.
Reviewed by: alc
Feedback from: jhb, kib
MFC notes: Depends on r291688
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4280
* When processing a cookie, use the number of
streams announced in the INIT-ACK.
* When sending an INIT-ACK for an existing
association, use the value from the association,
not from the end-point.
MFC after: 1 week
The normal LIBADD is ssp_nonshared. This also had a DPADD on LIBSSP which
does not actually exist, it is blank.
Sponsored by: EMC / Isilon Storage Division
it and then chmod back. There's no chmod -push / chmod -pop so hard
code 444 as the right permissions here.
Also, fix more stray detritus that crept in (out?) while re-arranging
the deck chairs.
The erase size is reported by the nvram info command.
Submitted by: Paul Fox <pfox at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4386
It was allowed before, but make it very explicit it is allowed now. And
prefer 'bool' to older types that were used for the same purpose -- int and
boolean_t.
Like with the C99 fixed-width types, use common sense when changing old
code.
No igor regressions.
Suggested by: bde <20151205031713.T3286@besplex.bde.org>
Reviewed by: glebius, davide, bapt (earlier versions)
Reviewed by: imp
Feedback from: julian
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4384
- Restore R92C_TXDW4_HWSEQ_EN bit - it is used by non-8188EU chips.
- Fix DRVRATE bit usage.
Tested with:
- RTL8188EU, STA mode.
- RTL8188CUS, STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4352
While here update for armv6 to a tested value.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: stat
Differential Revision: https://reviews.freebsd.org/D4315
LLE structure is mostly unchanged during its lifecycle.
To be more specific, there are 2 things relevant for fast path
lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we re-send arp request to perform reachability verification instead of
expiring entry. The only signal that is needed from fast path is something
like binary yes/no.
The latter is solved by the following changes:
1) introduce special r_skip_req field which is read lockless by fast path,
but updated under (new) req_mutex mutex. If this field is non-zero, then
fast path will acquire lock and set it back to 0.
2) introduce simple state machine: incomplete->reachable<->verify->deleted.
Before that we implicitely had incomplete->reachable->deleted state machine,
with V_arpt_keep between "reachable" and "deleted". Verification was performed
in runtime 5 seconds before V_arpt_keep expire.
This is changed to "change state to verify 5 seconds before V_arpt_keep,
set r_skip_req to non-zero value and check it every second". If the value
is zero - then send arp verification probe.
These changes do not introduce any signifficant control plane overhead:
typically lle callout timer would fire 1 time more each V_arpt_keep (1200s)
for used lles and up to arp_maxtries (5) for dead lles.
As a result, all packets towards "reachable" lle are handled by fast path without
acquiring lle read lock.
Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler
might keep LLE lock for signifficant amount of time, which might not be feasible
for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock).
Differential Revision: https://reviews.freebsd.org/D3688
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
suppression but the version of the IOAPIC reported is 0x11 and neither
IOAPIC EOIR nor the Linux trick of temporal reprogramming of the pin
to edge-trigger mode to issue EOI work.
Disable eoi suppression if KVM is detected. The mode can still be
forced with the tunable.
Reported and tested by: Roman Mamontov <mr.xanto@gmail.com>
Sponsored by: The FreeBSD Foundation
ptes mapping the kernel on CPUs where global TLB entries are
supported, revert to flushing only non-global entries, i.e. to the
pre-r291688 state. There is no need to flush global TLB entries,
since only global entries created during the previous iterations of
the loop could exist at this moment.
Submitted by: alc
Differential revision: https://reviews.freebsd.org/D4368
