supervised program. The existing -r option has a hard-coded delay of one
second. This change adds a -R option which takes a delay in seconds. This
can be used to prevent log spam and rapid restarts, similar to init(8)'s
behavior of adding a delay between rapid restarts when it's supervising a
program.
- Move all of the code responsible for transmitting log messages into a
separate function, fprintlog_write().
- Instead of manually modifying a list of iovecs, add a structure
iovlist with some helper functions.
- Alter the F_FORW (UDP message forwarding) case to also use iovecs like
the other cases. Use sendmsg() instead of sendto().
- In the case of F_FORW, truncate the message to a size dependent on the
address family (AF_INET, AF_INET6), as proposed by RFC 5426.
- Move all traditional message formatting into fprintlog_bsd(). Get rid
of some of the string copying and snprintf()'ing. Simply emit more
iovecs to get the job done.
- Increase ttymsg()'s limit of 7 iovecs to 32. Add a definition for this
limit, so it can be reused by iovlist.
- Add fprintlog_rfc5424() to emit RFC 5424 formatted log entries.
- Add a "-O" command line option to enable RFC 5424 formatting. It would
have been nicer if we supported "-o rfc5424", just like on NetBSD.
Unfortunately, the "-o" flag is already used for a different purpose
on FreeBSD.
- Don't truncate hostnames in the RFC 5424 case, as suggested by that
specific RFC.
For people interested in using this, this feature can be enabled by
adding the following line to /etc/rc.conf:
syslogd_flags="-s -O rfc5424"
Differential Revision: https://reviews.freebsd.org/D15011
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
By popular demand, pkg now walks thought the arguments passed and
if it finds -y or --yes it does accept those as equivalent of
ASSUME_ALWAYS_YES env var.
Requested by: many
MFC after: 1 week
Directory mtime will only change if a file is added or removed, not
modified. For /var/cron/tabs, this is fine because of how crontab(1) manages
it using temp files so all crontab(1) changes will trigger a reload of the
database.
For /etc/cron.d and /usr/local/etc/cron.d, this is not necessarily the case.
Instead of checking their mtime, we should descend into them and check mtime
on all jobs also.
Reported by: des
Reviewed by: bapt
MFC after: 1 week
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Now that all of parsemsg() parses both RFC 3164 and 5424 messages and
hands them to logmsg(), alter the latter to properly forward all RFC
5424 message attributes to fprintlog(). While there, make some minor
cleanups to this code:
- Instead of extending the existing code that compares hostnames and
message bodies for deduplication, print all of the relevant message
fields into a single string that we can compare ('saved').
- No longer let the behaviour of fprintflog() depend on whether
'msg == NULL' to print repetition messages, Simply decompose this
function into fprintlog_first() and fprintlog_successive(). This
makes the interpretation of function arguments less magical and also
allows us to get consistent behaviour across RFC 3164 and 5424 when
adding support for the RFC 5424 output format.
- As RFC 5424 syslog messages have a dedicated application name field,
alter the repetition messages to be printed on behalf of syslogd on
the current system. Change these messages to use the local hostname,
so that it's obvious which syslogd instance detected the repetition.
Remove f_prevhost, as it has now become unnecessary.
- Remove a useless strdup(). Deconsting the message string is safe in
this specific case.
Syslogd currently uses the RFC 3164 format for its log messages.One
limitation of RFC 3164 is that it cannot be used to log entries with
sub-second precision timestamps. One of our users has expressed a desire
for doing this for doing some basic performance measurements.
This change attempts to make a first cut at switching to RFC 5424 based
logging. The first step is to alter syslogd's input path to properly
parse such messages. It alters the logmsg() prototype to match the
fields of RFC 5424. The parsemsg() function is extended to parse both
RFC 3164 and 5424 messages and call into logmsg() accordingly.
Additional changes include:
- Introducing proper parsing of timestamps, so that they can be printed
in any desired output format. This means we need to infer the year and
timezone for RFC 3164 timestamps.
- Removing ISKERNEL. This can now be realised by simply providing an
APP-NAME (== "kernel").
- Extending RFC 3164 parsing to trim off the TAG prefix and using that
to derive APP-NAME and PROCID.
- Increase MAXLINE. RFC 5424 mentions we should support 2k messages.
Differential Revision: https://reviews.freebsd.org/D14926
When I implemented my EFI support I failed to check if the upstream version
of makefs in NetBSD had done the same. Override my version with theirs to
make it easier to stay in sync with them in the future.
Reviewed by: imp, mav
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14913
r222319 in newfs raised the default blocksize for UFS/FFS filesystems
from 16K to 32K and the default fragment size from 2K to 4K, with a
rationale that most disks were now running with 4K sectors.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
UEFI booting requires an EFI System Partition (ESP). On most storage devices
this will be in a specific partition type. To allow booting from CD/ISO
filesystems, UEFI will look for an ESP in the form of a FAT filesystem image
embedded in the image. Historically FreeBSD has added one of these to its
amd64 ISO images but marked it as simply another i386 boot image. Luckily for
us most UEFI implementations are rather forgiving and work this out for us.
This change adds the ability to mark a boot image as being a UEFI image. It
also modifies our ISO generation to use this marking for the UEFI image we
embed.
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: emaste, imp
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14809
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Two PRs (152084 & 210187) request allowing the "@" and/or "!"
characters in the passwd file GECOS field. The man page for pw does
not mention that those characters are disallowed, Linux supports those
characters in this field, and the "@" character in particular would be
useful for storing email addresses in that field.
PR: 152084, 210187
Submitted by: jschauma@netmeister.org, Dave Cottlehuber <dch@freebsd.org>
Reported by: jschauma@netmeister.org, Dave Cottlehuber <dch@freebsd.org>
Reviewed by: delphij (secteam), vangyzen
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14519
A memory leak in syslogd for processing of forward actions was
reported. This modification adapts the patch submitted with that bug
to fix the leak. While testing the modification, another leak was also
found and fixed.
PR: 198385
Submitted by: Sreeram <sreeramabs@yahoo.com>
Reported by: Sreeram <sreeramabs@yahoo.com>
Reviewed by: hrs
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14510
Added the ability to:
* Create virtual interfaces
* Create vlan interfaces
* Get interface fib
* Get interface groups
* Get interface status
* Get nd6 info
* Get media status
* Get additional ifaddr info in a convenient struct
* Get vhids
* Get carp info
* Get lagg and laggport status
* Iterate over all interfaces and ifaddrs
And add more examples, too.
Note that this is a backwards-incompatible change. But that's ok, because it's
a private library.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14463
When attempting to mount a non-directory which exists, return ENOTDIR instead
of ENOENT. If stat() or statfs() failed, don't pass part of the invalid
(struct statfs) to ex_search(). In that same case, preserve the value of "bad"
rather than overwriting with EACCES.
Submitted by: Bruce Leverett (Panasas)
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14438
Detect ancient GCC specifically, rather than using target architecture as a
crude heuristic.
Side note: compilers should really ignore -Wno- and -Wno-error= flags they
don't recognize. Seems like modern compilers produce warnings instead of
errors. Though, with -Werror they turn into errors. Clang's error can be
disabled with -Wno-error=unknown-warning-option, but GCC doesn't seem to
have a named method to disable the specific warning.
Submitted by: rpokala@ (earlier version)
Suggested by: rpokala@
Reviewed by: tinderbox
Sponsored by: Dell EMC Isilon
Update function definitions to post-ISO style; remove deprecated "register"
keyword. Correct indentation. Sprinkle 'static' on file-local variables.
Appease warnings at WARNS=6, for both Clang and GCC.
Sponsored by: Dell EMC Isilon