Commit Graph

36 Commits

Author SHA1 Message Date
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
65309e5cda Convert IIJ copyrights to BSD copyrights.
Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>
2001-06-13 21:52:19 +00:00
Brian Somers
da70ad6081 Handle IP over IP (IPPROTO_IPV4) properly.
We now unwrap IP/IP and apply filter rules to both the outer
  layer (with ``set filter blah x.x.x.x y.y.y.y ipip'') and to
  the payload (reinterpreted by the filter rules).

  ``set log tcp/ip'' will now show both the outer wrapper and
  the (reinterpreted) payload contents.
2001-04-24 02:13:34 +00:00
Brian Somers
2231246bb3 Understand IPPROTO_ESP and IPPROTO_AH packets
Submitted by: Angelos D. Keromytis <angelos@dsl.cis.upenn.edu>
2000-09-14 18:01:54 +00:00
Brian Somers
0a4b6c5c5c Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.

I made the style more consistent in ip.c - this should really have
been done as a separate commit.
2000-07-11 22:11:36 +00:00
Brian Somers
2793563fc4 Increase bit fields to allow for new values 2000-03-14 20:11:45 +00:00
Brian Somers
d568d6c405 Add the ``resolv'' command for telling ppp how to deal with resolv.conf.
You can now ``resolv restore'' in ppp.linkdown !
Add DNS0 and DNS1 macros.
2000-03-14 01:47:27 +00:00
Brian Somers
28149effa7 Support GRE packets
Submitted by: Harry Starr <starr@gccs.com.au>
1999-09-30 07:23:13 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
62e85934b8 #ifdef IPPROTO_OSPFIGP before expecting it to be defined.
This unbreaks OpenBSD.
1999-08-02 15:29:19 +00:00
Brian Somers
2faae814fb Filter ospf and igmp separately.
Kind-of submitted by: phk
1999-08-02 11:53:16 +00:00
Brian Somers
cad7e7426a o Overhaul filtering, adding facilities to jump over rules and to
negate the sense of rules.
o Remove the redundant (and undocumented) ``host'' and ``port''
  words (README.changes updated).
o Don't permit (and ignore) garbage instead of the protocol.

Mostly submitted by:  Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
1999-07-27 23:44:00 +00:00
Brian Somers
1f9e5fe5fa Support `igmp' filters.
Mostly submitted by: Timo Geusch <freebsd@sleepycat.ukpeople.net>
1999-06-23 16:48:24 +00:00
Brian Somers
1d1fc0171e Remember if MYADDR or HISADDR is used in a filter add tweak all
filters any time either value changes.
1999-05-31 23:57:40 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
d9949a3acf Change the maximum number of filters from 20 to 40.
Increase requested by: "Clement T. Cole" <clemc@echo.ccc.com>
1999-01-19 22:16:02 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
cdbbb6b571 Cosmetic: Clean up warnings. 1998-04-18 01:01:28 +00:00
Brian Somers
63f98b41d4 o Understand `syn'' and `finrst'' in filter rules. This
is particularily useful when creating dial filters.
  Original work by: Junichi SATOH (junichi@astec.co.jp)
o Parse a filter IP of ``0.0.0.0'' as having a width of 0,
  not 32.
o Correct "set filter" usage message.
o Warn about bad filter names.
o Expand and correct a number of the man page sections.
1998-04-16 18:30:54 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
8390b57662 o Drop packets that fail the dial filter when we're in
phase DEAD.  They'll almost definitely have timed out
  by the time we dial anyway.
o Log dial filters again (LogTCPIP).
o Make DEBUG diagnostics for filter checking actually mean
  something to the common observer.
o Do our best to keep any already-configured IP numbers at
  IPCP negotiation time.  We always first request our configured
  IP, and if the peer asks for an invalid IP, we NAK with HISADDR

Cosmetic:
  o Add a linefeed to the `set timeout' arg count error message.
  o Log unacceptable address errors to LogPHASE if LogIPCP is
    switched off.
  o Fix ``destination system not found'' error message.
  o Get out immediately if we get a fatal error before entering
    the main loop.
1998-04-03 19:25:07 +00:00
Brian Somers
5ca5389af4 Move filter sets into struct bundle. 1998-03-16 22:52:54 +00:00
Brian Somers
5828db6d2d Move the IPCP into struct bundle. 1998-03-13 21:07:46 +00:00
cvs2svn
1ae349f52c This commit was manufactured by cvs2svn to create branch 'MP'. 1998-01-29 00:44:16 +00:00
Brian Somers
b6e82f33ef Fix prototypes.
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.

We can now survive a compile with
  -Wall -Wbad-function-cast -Wcast-align -Wcast-qual
  -Winline -Wmissing-declarations -Wmissing-prototypes
  -Wnested-externs -Wpointer-arith -Wredundant-decls
  -Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
1997-11-22 03:37:54 +00:00
Brian Somers
75240ed178 Cosmetic (no functional changes):
o   Add missing $Id$s
o   Move extern decls from .c -> .h files
o   Staticize
o   Remove #includes from .h files
o   style(9)ify includes
o   bcopy -> memcpy
    bzero -> memset
    bcmp -> memcmp
    index -> strchr
    rindex -> strrchr
o   Move timeout.h -> timer.h (making it consistent w/ timer.c)
o   Add -Wmissing-prototypes
1997-10-26 01:04:02 +00:00
Brian Somers
944f709824 Make the code format more in line with style(9).
Update loadalias to use the new libalias api.
Update to version 1.1.
1997-08-25 00:29:32 +00:00
Brian Somers
927145be97 Overhaul ppp:
o Use syslog
  o Remove references to stdout/stderr (incl perror())
  o Introduce VarTerm - the interactive terminal or zero
  o Allow "set timeout" to affect current session
  o Change "set debug" to "set log"
  o Allow "set log [+|-]flag"
  o Make MSEXT and PASSWDAUTH stuff the default
  o Move all #ifdef DEBUG stuff into the code - this
    shouldn't be too much overhead.  It's now controlled
    with "set log +debug"
  o Add "set log command, debug, tun, warn, error, alert"
  o Remove cdefs.h, and assume an ansi compiler.
  o Improve all diagnostic output
  o Don't trap SIGSEGV
  o SIGHUP now terminates again (log files are controlled
    by syslog)
  o Call CloseModem() when changing devices
  o Fix parsing of third arg of "delete"

I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten.  It'll follow soon.
1997-06-09 03:27:43 +00:00
Brian Somers
274e766c99 Tidy up the code - bounds checking, return
value checking etc.

Submitted by:	eivind
1997-05-10 01:22:19 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Poul-Henning Kamp
ed6a16c181 Final cleanup for now. -Wall is now silent. A couple of bogons found. 1996-01-11 17:48:59 +00:00
Atsushi Murai
84b8a6ebd1 1.Reducing cpu usage at off connection.
2.Implment Redail function as working correctly.
3.Clean up a code as I notice.
4.Now, RTT getting close to 50ms with ISDN/TA 38400bps !!

Reviewed by:	amurai@spec.co.jp
Submitted by:	amurai@spec.co.jp
1995-03-11 15:18:55 +00:00
Atsushi Murai
53c9f6c0c4 New user Process PPP based on iij-ppp0.94beta2.
o Supporting SYNC SIO device (But need a device driver)
     - add "set speed sync"
   o Fixing bug for Predictor-1 function.
   o Add new parameter that re-sent interval for set timeout commands.
   o Improving RTT (Round Trip Time) and reducing processor time.
     - Previous Timer service was using polling, and now using
       SIGALRM ;-)
     - A 0.94beta2 will not work correctly....

   -- Follows are additinal feature not including 0.94beta2
   o Support Proxy ARP
     - add "enable/disable proxy" commands
   o Marging common routine in CHAP/PAP.
   o Enhancing LCP/IPCP log information.
   o Support local Authfication connection on port 300x and tty.
     - You can set up pair of your "hostname -s" and
       password in ppp.secret. if either ppp.secret file nor
       your hostname line don't exist, It will notify a message
       and working as same as previous version.(Backword compatibility)
     - If you did set up them, It's allow connection but nothing to do
       except help and passwd command.
     - add "passwd yourpasswd" commands
   o Support afilter - keep Alive filter that a packet can send/receiving
     according to ifilter/ofilter but doesn't count it as preventing idle
     timer expires.
     - Same syntax of other filters.
   o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
1995-02-26 12:18:08 +00:00
Atsushi Murai
af57ed9fdc 1995-01-31 06:29:58 +00:00