This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
work when called by members of the 'operator' group. They are already
allowed to eg power off the system (via suid shutdown(8)), so they
might as well be permitted to suspend it.
Tested by: xmj@
Reviewed by: delphij@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16062
I want to do this change because this call (actually,
AcpiHwLegacyWakePrep) does a memory allocation and ACPI namespace
evaluation. Although it is not very likely to run into any trouble, it
is still not safe to make those calls with interrupts disabled.
witness(4) and malloc(9) do not currently check for a context with
interrupts disabled via intr_disable and we lack a facility for doing
that. So, those unsafe operations fly under the radar. But if
intr_disable in acpi_EnterSleepState was replaced with spinlock_enter
(which it probably should be), then witness and malloc would immediately
complain.
Also, AcpiLeaveSleepStatePrep is documented as called when interrupts
are enabled. It used to require disabled interrupts, but that
requirement was changed a long time ago when support for _BFS and _GTS
was removed from ACPICA.
The ACPI wakeup sequence is very sensitive to changes. I consider this
change to be correct, but there can be fallouts from it.
What AcpiHwLegacyWakePrep essentially does is writing a value
corresponding to S0 into SLP_TYPx bits of PM1 Control Register(s).
According to ACPI specifications that write should be a NOP as SLP_EN
bit is not set. But I see in some chipset specifications that they
allow to ignore SLP_EN altogether and to act on a change of SLP_TYPx
alone.
Also, there are a couple of accesses to ACPI hardware before the new
location of the call to AcpiLeaveSleepStatePrep. One is to clear the
power button status and the other is to enable SCI. So, the move may
affect the interaction between then OS and ACPI platform.
I have not seen any regressions on my test system, but it's a desktop.
MFC after: 5 weeks
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
I have a system that is very unstable after resuming from suspend-to-RAM
but only if HPET is used as the event timer. The theory is that SMM
code / firmware could be enabling HPET for its own uses and unexpected
interrupts cause a trouble for it. Originally I wanted to solve the
problem in hpet_suspend() method, but that was insufficient as the event
timer could get reprogrammed again.
So, it's better, for my case and in general, to stop the event timer(s)
before entering the hardware suspend.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D15413
This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
ACPI I/O port descriptors use _MIN and _MAX fields to specify the set
of allowable base (start) addresses for an I/O port resource along with
a _LEN field specifying the length. A fixed resource is supposed to be
encoded with _MIN == _MAX, but some buggy firmwares instead set _MAX to
the end of the fixed range. Relocating I/O ranges only make sense in
_PRS (possible resource settings), not in _CRS (current resource settings),
so if an I/O port range with _MAX set set to the end of the range is
present in _CRS, treat it as a fixed I/O port resource starting at
_MIN.
PR: 224096
Submitted by: Harald Böhm <harald@boehm.codes>
Pointy hat to: jhb (taking so long to actually commit this)
MFC after: 1 week
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
bus provide it with its needed memory resources.
This allows us to use PCIe on the ThunderX2 and, with a previous version
of the patch, on the SoftIron 3000 with ACPI.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D8767
6.0 spec 6.4.3.5 bit 0 is ignored on QWord, DWord, and Word Address Space
Descriptors, but not Extended Address Space Descriptors.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D14516
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
By the ACPI standard (ACPI 5 chapter 8.4 Declaring Processors) Processors
can be implemented in 2 distinct ways:
* Through a Processor object type (which provides P_BLK)
* Through a Device object type
Prior to this change, the FreeBSD driver only supported the former. AMD
Epyc / Poweredge systems we are testing both implement the latter only. Add
the missing support.
Because P_BLK is not defined in the device object case, C-states entering
must be completely controlled via _CST methods rather than P_LVL2/3.
John Baldwin points out that ACPI 6.0 formally deprecates the Processor
keyword, so eventually processors will only be enumerated as Device objects.
Submitted by: attilio
Reviewed by: jhb, markj, Anton Rang <rang AT acm.org>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13457
From ACPICA 20170929, AcpiOsGetTimer() should be available early because
While() loop timeout mechanism was reimplemented with it. Unfortunately,
it means AcpiLoadTables() may cause panic when a While() loop is executed.
After having lengthy discussions with ACPICA developers, I have concluded
that dummy timecounter is good enough for the purpose and it is the least
intrusive solution for now. Also, they reminded me the ACPI specification
implies OS timer function should be available before loading tables.
This addresses a deadlock during boot when EARLY_AP_STARTUP is configured:
a taskqueue thread may call pause() with an ACPI mutex held, and thread0
may block on this mutex before configuring the eventtimer. In this case
the taskqueue thread will sleep forever waiting for its callout to fire.
PR: 220277
Submitted by: jhb
MFC after: 3 days
For GEN1 Hyper-V, vmbus is attached to pcib0, which contains the
resources for PCI passthrough and SR-IOV. There is no
acpi_syscontainer0 on GEN1 Hyper-V.
For GEN2 Hyper-V, vmbus is attached to acpi_syscontainer0, which
contains the resources for PCI passthrough and SR-IOV. There is
no pcib0 on GEN2 Hyper-V.
The ACPI VMBUS device now only holds its _CRS, which is empty as
of this commit; its existence is mainly for upward compatibility.
Device tree structure is suggested by jhb@.
Tested-by: dexuan@
Collabrated-wth: dexuan@
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10565
- Rename the default implementation of 'pcib_request_feature' and add
a pcib_request_feature() wrapper function (as is often done for
new-bus APIs implemented via kobj) that accepts a single function.
Previously the call to pcib_request_feature() ended up invoking the
method on the great-great-grandparent of the bridge device instead
of the grandparent. For a bridge that was a direct child of pci0 on
x86 this resulted in the method skipping over the Host-PCI bridge
driver and being invoked against nexus0
- When invoking _OSC from a Host-PCI bridge driver, invoke
device_get_softc() against the Host-PCI bridge device instead of the
child bridge that is requesting HotPlug. Using the wrong softc data
resulted in garbage being passed for the ACPI handle causing the
_OSC call to fail.
- While here, perform some other cleanups to _OSC handling in the ACPI
Host-PCI bridge driver:
- Don't invoke _OSC when requesting a control that has already been
granted by the firmware.
- Don't set the first word of the capability array before invoking
_OSC. This word is always set explicitly by acpi_EvaluateOSC()
since it is UUID-independent.
- Don't modify the set of granted controls unless _OSC doesn't exist
(which is treated as always successful), or the _OSC method
doesn't fail.
- Don't require an _OSC status of 0 for success. _OSC always
returns the updated control mask even if it returns a non-zero
status in the first word.
- Whine if _OSC ever tries to revoke a previously-granted control.
(It is not supposed to do that.)
- While here, add constants for the _OSC status word in acpivar.h
(though currently unused).
Reported by: adrian
Reviewed by: imp
MFC after: 1 week
Tested on: Lenovo x220
Differential Revision: https://reviews.freebsd.org/D10520
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
During acpi_cmbat_attach() the acpi_cmbat_init_battery() notification
handler is registered. It has been observed this notification handler
can be called instantly, before the attach routine has returned. In
the notification handler there is a call to device_is_attached() which
returns false. Because the softc is set we know an attach is in
progress and the fix is simply to wait and try again in this case.
Reviewed by: avg @
MFC after: 1 week
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
On Core2 and older Intel CPUs, where TSC stops in C2, system does not
allow C2 entrance if timecounter hardware is TSC. This is done by
tc_windup() which tests for TC_FLAGS_C2STOP flag of the new
timecounter and increases cpu_disable_c2_sleep if flag is set. Right
now init_TSC_tc() only sets the flag if cpu_deepest_sleep >= 2, but
TSC is initialized too early for this variable to be set by
acpi_cpu.c.
There is no reason to require that ACPI reported C2 and deeper states
to set TC_FLAGS_C2STOP, so remove cpu_deepest_sleep test from
init_TSC_tc() condition. And since this is the only use of the
variable, remove it at all.
Reported and submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Suggested by: jhb
MFC after: 2 weeks
using the ACPI C1/mwait sleep method.
Previously, the mwait instruction would return when an interrupt was
pending; however, the idle loop did not actually enable interrupts when
this occurred. This led to a situation where the idle loop could quickly
spin through the C1/mwait sleep method a number of times when an interrupt
was pending. (Eventually, the situation corrected itself when something
other than an interrupt triggered the idle loop to either enable interrupts
or schedule another thread.)
Reviewed by: kib, imp (earlier version)
Input from: jhb
MFC after: 1 week
Sponsored by: Netflix
memory-mapped devices that are normally PCIe drives. Devices can then use
the existing pci_get_class, etc. accessors to query this data.
The ivar values are different enough from the existing ACPI and ISA values
to not conflict.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8721
In order to make Prometheus do graphing/alerting on thermal sensors in a
generic fashion, we should attach the name of the thermal zone device as
a label. That way there is only a single metric for the temperature of a
thermal zone, with its name attached as a label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
If the bus number assigned to a Host-PCI bridge doesn't match the first
bus number in the associated producer range from _CRS, print a warning and
fail to attach rather than panicking due to an assertion failure.
At least one single-socket Dell machine leaves a "ghost" Host-PCI bridge
device in the ACPI namespace that seems to correspond to the I/O hub in
the second socket of a two-socket machine. However, the BIOS doesn't
configure the settings for this "ghost" bridge correctly, nor does it have
any PCI devices behind it.
Tested by: royger
MFC after: 2 weeks
When handling a GPE ACPI interrupt object the EcSpaceHandler()
function can be called which checks the EC_EVENT_SCI bit and then
recurse on the EcGpeQueryHandler() function. If there are multiple GPE
events pending the EC_EVENT_SCI bit will be set at the next call to
EcSpaceHandler() causing it to recurse again via the
EcGpeQueryHandler() function. This leads to a slow never ending
recursion during boot which prevents proper system startup, because
the EC_EVENT_SCI bit never gets cleared in this scenario.
The behaviour is reproducible with the ALASKA AMI in combination with
a newer Skylake based mainboard in the following way:
Enter BIOS and adjust the clock one hour forward. Save and exit the
BIOS. System fails to boot due to the above mentioned bug in
EcGpeQueryHandler() which was observed recursing multiple times.
This patch adds a simple recursion guard to the EcGpeQueryHandler()
function and also also adds logic to detect if new GPE events occurred
during the execution of EcGpeQueryHandler() and then loop on this
function instead of recursing.
Reviewed by: jhb
MFC after: 2 weeks
