Commit Graph

190 Commits

Author SHA1 Message Date
Warner Losh
d3f1313287 Remove All Rights Reserved
Remove the all rights reserved clause from my copyright, and make
other minor tweaks needed where that might have created ambiguity.
2019-02-05 21:37:34 +00:00
Warner Losh
329e817fcc Reapply, with minor tweaks, r338025, from the original commit:
Remove unused and easy to misuse PNP macro parameter

Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
2018-09-26 17:12:14 +00:00
Conrad Meyer
b8e771e97a Back out r338035 until Warner is finished churning GSoC PNP patches
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.

It's easy to apply/reapply when churn dies down.
2018-08-19 00:46:22 +00:00
Conrad Meyer
faa319436f Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
2018-08-19 00:22:21 +00:00
Conrad Meyer
cbb009b9fe puc(4): Add provisional support for Exar XR17V352
Reportedly, this is sufficient for 4800bps use, but maybe not any better.

PR:		228781
Submitted by:	peo AT nethead.se
2018-06-06 16:47:33 +00:00
Warner Losh
a397def9fb Add PNP info to the PCI attahement of the puc driver.
Adjust sys/conf/files and sys/modules/puc/Makefile to omit
pucdata.c now tht it's included by puc_pci.c.

Submitted by: Lakhan Shiva Kamireddy (with build fixes by me)
Pull Request: https://github.com/freebsd/freebsd/pull/136
2018-04-17 16:46:08 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Hans Petter Selasky
d3bf5efc1f Fix device delete child function.
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().

Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.

While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.

Tested by:		Jan Henrik Sylvester <me@janh.de>
Reviewed by:		jhb
Differential Revision:	https://reviews.freebsd.org/D8070
MFC after:		2 weeks
2016-10-17 10:20:38 +00:00
Justin Hibbits
82ed3cb0e4 Replace some more default range checks with RMAN_IS_DEFAULT_RANGE().
This is a follow-on to r295832.
2016-03-02 03:26:56 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Marius Strobl
3deebd539b - Add support for Advantech PCI-1602 Rev. B1 and PCI-1603 cards. [1]
- Add a description of Advantech PCI-1602 Rev. A boards. [1]
- Properly set up REG_ACR also for PCI-1602 Rev. A based on what the
  Advantech-supplied Linux driver does.
- Additionally use the macros of <dev/ic/ns16550.h> to replace existing
  magic values and get rid of trivial comments.
- Fix the style of some comments.

PR:		205359 [1]
Submitted by:	Jan Mikkelsen (original patch) [1]
2016-01-10 18:11:23 +00:00
Marius Strobl
430acc472f - Add entries for the more prominent members of the Digi International
Neo series, which are based on Exar PCI chips.
- Mark some unused parameters as such.
- Fix style

MFC after:	3 days
2015-12-29 17:07:28 +00:00
Marius Strobl
1714dcab20 - Add an entry for the SIIG Cyber 2SP1 PCIe adapter, which is based
on an Oxford Semiconductor OX16PCI954 but uses only two ports and
  a non-default clock rate.
- Fix style/whitespace

PR:		176407
MFC after:	3 days
2015-12-28 20:24:08 +00:00
Luiz Otavio O Souza
7eae632303 puc(4): Add an entry for the Feasso PCI FPP-02 2S1P card.
MFC after:	1 week
2015-01-02 22:45:55 +00:00
Rui Paulo
bdb4291f89 puc(4): add an entry for the Oxford Semiconductor OXPCIe952 1S1P card.
Submitted by:	Alex Burlyga <alex.burlyga.ietf at gmail.com>
MFC after:	1 week
2014-10-23 18:03:27 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Marius Strobl
10bcada8fa Correct a typo in a device description added in r264257. 2014-04-15 19:58:05 +00:00
Marius Strobl
bdc8dbd208 Refine r264257; given that I later on decided to nuke the wildcard for
the Sunix 0x1999 line of chips there actually is no need to explicitly
keep puc(4) from attaching to the single port version anymore.
2014-04-10 21:03:46 +00:00
Marius Strobl
50c0e894a0 Distinguish between the different variants and configurations of Sunix
{MIO,SER}5xxxx chips instead of treating all of them as PUC_PORT_2S.
Among others, this fixes the hang seen when trying to probe the none-
existent second UART on an actually 1-port chip.

Obtained from:	NetBSD (BAR layouts)
MFC after:	3 days
Sponsored by:	Bally Wulff Games & Entertainment GmbH
2014-04-08 07:32:32 +00:00
Ryan Stone
9725900ba6 Add MSI support to puc(9)
Add support for MSI interrupts in the puc(9) driver.  By default the driver
will prefer MSI interrupts to legacy interrupts.  A tunable,
hw.puc.msi_disable, has been added to force the allocation of legacy
interrupts.

Reviewed by:	jhb@
MFC after:	2 weeks
Sponsored by:	Sandvine Inc.
2014-03-13 15:57:25 +00:00
Sergey Kandaurov
77b2b60dcf Clean up -Wheader-guard warnings.
Submitted by:	<dt71@gmx.com>
MFC after:	3 days
X-MFC with:	r251848
2013-06-17 20:11:04 +00:00
Marius Strobl
d5e0798e6d All of Oxford/PLX OX16PCI954, OXm16PCI954 and OXu16PCI954 share the
exact same (subsystem) device and vendor IDs. However, the reference
design for the OXu16PCI954 uses a 14.7456 MHz clock (as does the EXSYS
EX-41098-2 equipped with these), while at least the OX16PCI954 defaults
to a 1.8432 MHz one. According to the datasheets of these chips, the
only difference in PCI configuration space is that OXu16PCI954 have
a revision ID of 1 while the other two are at 0. So employ the latter
for determining the default clock rates of this family.
Note that one might think that the actual clock could be derived from
the Clock Prescaler Register (CPR) of these chips. Unfortunately, this
is not that case and its use and content are orthogonal to the frequency
of the crystal employed.
Tested with an EXSYS EX-41098-2, which identifies and attaches as:
pcib4@pci0:19:0:0:      class=0x060400 card=0x02dd1014 chip=0x10801b21
rev=0x03 hdr=0x01
    vendor     = 'ASMedia Technology Inc.'
    device     = 'ASM1083/1085 PCIe to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
puc0@pci0:20:4:0:       class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
    class      = simple comms
    subclass   = UART
puc1@pci0:20:4:1:       class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
    class      = bridge
puc2@pci0:20:8:0:       class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
    class      = simple comms
    subclass   = UART
puc3@pci0:20:8:1:       class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
    class      = bridge

pci20: <ACPI PCI bus> on pcib4
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5000-0x501f,
0x5020-0x503f mem 0xc6000000-0xc6000fff,0xc6001000-0xc6001fff irq 16 at
device 4.0 on pci20
uart1: <16950 or compatible> at port 1 on puc0
uart2: <16950 or compatible> at port 2 on puc0
uart3: <16950 or compatible> at port 3 on puc0
uart4: <16950 or compatible> at port 4 on puc0
puc1: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x5040-0x505f,0x5060-0x507f mem 0xc6002000-0xc6002fff,0xc6003000-0xc6003fff
irq 16 at device 4.1 on pci20
puc2: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5080-0x509f,
0x50a0-0x50bf mem 0xc6004000-0xc6004fff,0xc6005000-0xc6005fff irq 16 at
device 8.0 on pci20
uart5: <16950 or compatible> at port 1 on puc2
uart6: <16950 or compatible> at port 2 on puc2
uart7: <16950 or compatible> at port 3 on puc2
uart8: <16950 or compatible> at port 4 on puc2
puc3: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x50c0-0x50df,0x50e0-0x50ff mem 0xc6006000-0xc6006fff,0xc6007000-0xc6007fff
irq 16 at device 8.1 on pci20

MFC after:	2 weeks
2013-06-13 22:13:41 +00:00
Marius Strobl
d13dfb644a Fix whitespace and normalize some entries. 2013-06-13 21:47:22 +00:00
Ryan Stone
3aff0961dd Correct the definition for Exar XR17V258IV: we must use a config_function
to specify the offset into the PCI memory spare at which each serial port
will find its registers.  This was already done for other Exar PCI serial
devices; it was accidentally omitted for this specific device.

Sponsored by:	Sandvine Incorporated
MFC after:	1 week
2013-03-18 19:22:51 +00:00
Ryan Stone
8de2c77bb3 Add support for Exar XR17V358 8-port serial device to puc(4)
Reviewed by:	marius
Sponsored by:	Sandvine Inc.
MFC after:	1 week
2013-03-15 19:58:44 +00:00
Marius Strobl
00ff5de585 - Apparently, r186520 was just wrong and the clock of Oxford OX16PCI958 is
neither DEFAULT_RCLK * 2 nor DEFAULT_RCLK * 10 but plain DEFAULT_RCLK
  and there's no (open) source indicating otherwise. This was tested with
  an EXSYS EX-41098-2, whose clock is not configurable and identifies as:
  puc0@pci0:5:1:0:        class=0x070200 card=0x06711415 chip=0x95381415 rev=0x01 hdr=0x00
      vendor     = 'Oxford Semiconductor Ltd'
      class      = simple comms
      subclass   = multiport serial

  Note that this exactly matches the card mentioned in PR 129665 so no
  sub-device/sub-vendor based quirking of the latter is possible. So maybe
  we should grow some sort of tunable, in case non-default cards such as
  the latter aren't configurable either (this also wouldn't be the first
  time an allegedly tested commit turns out to be wrong though).
- Make the TiMedia tables const.

MFC after:	1 week
2013-03-01 20:16:06 +00:00
John Baldwin
323e149ade Do not require a filter-only interrupt handler for puc ports that are not
serial devices (such as printer ports).  This allows ppc devices attached
to puc to correctly setup an interrupt handler and work.

Tested by:	Andre Albsmeier  Andre.Albsmeier@siemens.com
MFC after:	1 week
2013-01-15 20:13:25 +00:00
Eitan Adler
5bcc8e2fbd Add support for Advantech PCI-1602 RS-485/RS-422 serial card
PR:		kern/169726
Submitted by:	Jan Mikkelsen <janm@transactionware.com>
Approved by:	cperciva (implicit)
MFC after:	5 days
2012-11-09 01:51:06 +00:00
Eitan Adler
0dfbbace0d Add support for SIIG Cyber Serial Dual PCI 16C850
Submitted by:	David Boyd David.Boyd@insightbb.com
Approved by:	cperciva
MFC after:	3 days
2012-08-05 19:37:18 +00:00
Eitan Adler
edfaa73726 Add additional Perle Speed LE serial cards
PR:		kern/168816
Submitted by:	Dennis Oyama <doyama@perle.com>
Approved by:	cperciva
MFC after:	1 week
2012-08-05 08:10:02 +00:00
Max Khon
51cb024f1f - Change back "d_ofs" to int8_t to not pessimize padding and size of "struct puc_cfg".
- Use "puc_config_moxa" for Moxa boards that need d_ofs greater than 0x7f

Prodded by:	marcel@, gavin@
MFC after:	3 days
2012-07-31 05:23:23 +00:00
Max Khon
2a879e7b0e Remove Moxa CP-132EL definition (RS422/485-only board). 2012-06-21 04:57:59 +00:00
Max Khon
f83255a599 Add support for the following Moxa PCIe multiport serial boards:
- CP102E
- CP102EL
- CP132EL
- CP114EL
- CP118EL-A
- CP168EL-A

MFC after:	1 week
2012-06-21 03:10:48 +00:00
John Hay
7501345eed Add support for the Sunix SER5437A dual serial PCI Express card. 2012-06-08 06:07:23 +00:00
Eitan Adler
d9b73ea9cf Add support for Sun 1040 PCI Quad Serial
PR:		kern/163450
Submitted by:	Anonymous Hardware Hacker <silicium@harmony-p.ath.cx>
Approved by:	cperciva
MFC after:	1 week
2012-05-30 03:47:51 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Eitan Adler
64589ec83f - add support for Titan VScom PCIex-800H
PR:		kern/124128
Submitted by:	Maxim Frolov <maxim.frolov.07@gmail.com> (original)
Approved by:	jhb
MFC after:	1 week
2011-11-15 17:53:29 +00:00
Eitan Adler
2c89ac5e81 - add support for CP-104EL-A and CP-104JU to puc
PR:		151365
Submitted by:	Joerg Niendorf <f5d10a@internode.on.net>
Approved by:	jhb
2011-11-11 22:24:16 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Eitan Adler
acdfc36a85 - add support for I-O DATA RSA-PCI2/R
PR:		kern/142999
Submitted by:	Takefu Kenji <takefu@airport.fm>
Approved by:	jhb
Approved by:	sahil (mentor)
MFC after:	1 week
2011-10-15 21:06:08 +00:00
Andrey V. Elsukov
a6a646124b Add Oxford Semiconductor OXPCIe952 (0x1c38) 1 port serial card.
PR:		kern/160895
Submitted by:	Konstantin V. Krotov
MFC after:	1 week
2011-09-29 15:43:02 +00:00
John Baldwin
8efbf2642b Add device id for the Moxa CP-112UL dual-port serial adapters.
Submitted by:	Jan Mikkelsen  janm of transactionware com
Approved by:	re (kib)
MFC after:	1 week
2011-08-15 19:29:25 +00:00
John Baldwin
573e64d4e2 Add location and pnpinfo strings for puc device ports. The location is
announced during boot and contains the port number.  The pnpinfo string
lists the port type (PUC_TYPE_* constants).

Tested by:	Boris Samorodov  bsam ipt ru
MFC after:	1 week
2011-06-14 18:19:48 +00:00
John Baldwin
a59f78daa9 Some style fixes.
Submitted by:	bde
2011-06-06 15:33:15 +00:00
John Baldwin
22e0612f0f - Rename the Cronyx Omega2-PCI entry to Exar XR17C158 since that is the
real owner of the device ID.  Also rename the associated config
  function while here.
- Add support for the 2-port and 4-port Exar parts as well: Exar XR17C/D152
  and Exar XR17C154.

Tested by:	Mike Tancsa, Willy Offermans  Willy of offermans rompen nl
MFC after:	1 week
2011-06-03 20:59:21 +00:00
John Baldwin
9c418f51ca For Timedia multiport serial adapters, the first two ports use a SUN1889
which uses a non-standard clock (* 8) while any additional ports use
SUN1699 chips which use a standard clock.

Tested by:	N.J. Mann   njm of njm me uk
MFC after:	1 week
2011-05-26 20:54:45 +00:00
John Baldwin
10414b71e3 Add support for the SIIG Cyber 2S PCIe adapter. It is based on an
Oxford Semiconductor OX16PCI954 but uses only two ports with a non-default
clock rate.

PR:		kern/152034
Tested by:	Hans Fiedler  hans of hermes louisville edu
MFC after:	1 week
2011-05-19 11:41:12 +00:00
John Baldwin
30ced0d8ea Add an entry for the SIIG Quartet Serial 850 which uses an Oxford
chip with a non-default clock.

PR:		kern/147583
MFC after:	1 week
2011-05-10 12:40:35 +00:00