The correct names for R_MIPS_GOT_HI16 and R_MIPS_GOT_LO16 have a _
after GOT. The nonstandard names (R_MIPS_GOTHI16, R_MIPS_GOTLO16) in the
FreeBSD elf_common.h header also had incorrect values and were not used
in the tree, so just remove them.
Add other MIPS relocation types found in FreeBSD/mips64 object files.
Reviewed by: imp, jmallett
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6561
This is required to signal connetion setup on non-blocking sockets
via becoming writable. This still allows for implicit connection
setup.
MFC after: 1 week
While I'm here, prefix function names w/ vmbus, since unlike Hyper-V
timecounter, Hyper-V event timer will not work w/o vmbus.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6598
Some machine BIOSes use the I2C bus and leave it in a state that causes
interrupts to not work properly due to a pending interrupt having been
latched.
Refactor the code a bit to clear pending interrupts when I2C is enabled.
This fixes the primary problem.
Also fix a possible race condition in the interrupt handler where the
interrupt was being cleared after reading the status instead of before.
Reported by: pfg
Reviewed by: jhb
Approved by: jhb
Obtained from: DragonFly BSD
Differential Revision: https://reviews.freebsd.org/D6586
While I'm here remove the event timer's dependency on hv_vmbus_priv.h
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6574
- Make sure that STIMER0 is disabled before writting to it, since
writing to an enabled STIMER will result in undefined behaviour.
- It is unnecessary to reconfigure STIMER0 upon each et_start().
- Make sure that MSR_HV_REF_TIME_COUNT will not return 0, since
writing 0 to STIMER_COUNT will disable the target STIMER.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6573
This flag has not been used, and drivers setting M_HASHTYPE_OPAQUE have
not been converted as of this commit.
Reviewed by: hps, gallatin (early version)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6406
If the connection was persistent and receiving-only, several (12)
sporadic device insufficient buffers would cause the connection be
dropped prematurely:
Upon ENOBUFS in tcp_output() for an ACK, retransmission timer is
started. No one will stop this retransmission timer for receiving-
only connection, so the retransmission timer promises to expire and
t_rxtshift is promised to be increased. And t_rxtshift will not be
reset to 0, since no RTT measurement will be done for receiving-only
connection. If this receiving-only connection lived long enough
(e.g. >350sec, given the RTO starts from 200ms), and it suffered 12
sporadic device insufficient buffers, i.e. t_rxtshift >= 12, this
receiving-only connection would be dropped prematurely by the
retransmission timer.
We now assert that for data segments, SYNs or FINs either rexmit or
persist timer was wired upon ENOBUFS. And don't set rexmit timer
for other cases, i.e. ENOBUFS upon ACKs.
Discussed with: lstewart, hiren, jtl, Mike Karels
MFC after: 3 weeks
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5872
- Reset debug architecture and enable monitor for secondary
CPUs in init_secondary() rather than when configuring watchpoint, etc.
- Disable HW debugging capabilities when one of the CPU cores fails
to set up.
- Use dbg_capable() in a more atomic manner to avoid any mismatch
between CPUs.
Differential Revision: https://reviews.freebsd.org/D6009
- Enable monitor mode prior to accessing watchpoint
registers for v6, v6.1 architectures.
- Fix configuration scheme for v6, v6.1 and v7 Debug Archs
- Enable monitor unconditionally and for good instead
of enabling and disabling it (needed for single stepping
on on v6/v6.1)
Tested on RPI-B and Arndale
Differential Revision: https://reviews.freebsd.org/D6008
for C++. It clashes with the one in libc++'s <atomic> header.
(Previously, the _Atomic() macro was defined in <stdatomic.h>, which is
only for use with C11, but for various reasons it was moved to its
current location in r251804.)
Discussed with: bdrewery, ed
MFC after: 2 weeks
a preference for memory load instructions over large code footprints
with embedded immediate variables.
On amd64 CPUs from 2007-2008 there is not a significant change, but
amd64 CPUs from 2009-2010 get roughly 10% more throughput with this
code; amd64 CPUs from 2011-2012 get roughly 15% more throughput; and
AMD64 CPUs from 2013-2015 get 20-25% more throughput. The Raspberry
Pi 2 increases its throughput by 6-8%.
Sponsored by: Tarsnap Backup Inc.
Performance tested by: allanjude
MFC after: 3 weeks
floating point constant to int64_t. This avoids the runtime
conversion of the the other operand in a set of comparisons from
int64_t to floating point and doing the comparisions in floating
point.
Suggested by: lidl
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 2 weeks (with r300779)
Connect it to userland (libmd, libcrypt, sbin/md5) and kernel (crypto.ko)
Support for skein as a ZFS checksum algorithm was introduced in r289422
but is disconnected because FreeBSD lacked a Skein implementation.
A further commit will enable it in ZFS.
Reviewed by: cem
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6166
- Assign frame sequence/fragment number before frame concatenation;
otherwise, frame header pointer (wh) will be invalid.
- Move this code block upper and eliminate duplicate 'lwh = mtod()'
assignment.
Tested with wpi(4) (transmitter) (STA mode) and urtwn(4) (receiver)
(HOSTAP mode).
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
This implements SHA-512/256, which generates a 256 bit hash by
calculating the SHA-512 then truncating the result. A different initial
value is used, making the result different from the first 256 bits of
the SHA-512 of the same input. SHA-512 is ~50% faster than SHA-256 on
64bit platforms, so the result is a faster 256 bit hash.
The main goal of this implementation is to enable support for this
faster hashing algorithm in ZFS. The feature was introduced into ZFS
in r289422, but is disconnected because SHA-512/256 support was missing.
A further commit will enable it in ZFS.
This is the follow on to r292782
Reviewed by: cem
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6061
When hwpmc stops sampling it will set the pm_state to something other
than PMC_STATE_RUNNING. This means the following sequence can happen:
CPU 0: Enter the interrupt handler
CPU 0: Set the thread TDP_CALLCHAIN pflag
CPU 1: Stop sampling
CPU 0: Call pmc_process_samples, sampling is stopped so clears ps_nsamples
CPU 0: Finishes interrupt processing with the TDP_CALLCHAIN flag set
CPU 0: Call pmc_capture_user_callchain to capture the user call chain
CPU 0: Find all the pmc sample are free so no call chains need to be captured
CPU 0: KASSERT because of this
This fixes the issue by checking if any of the samples have been stopped
and including this in te KASSERT.
PR: 204273
Reviewed by: bz, gnn
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6581
to use TRYLOCK rather than just acquire the lock, so just do that.
Reviewed by: markj
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6578
This is like the WB222 coexistence (ie, "MCI", a message bus inside the
chip), and it's currently a cut/paste so I can start using it to flesh
out the differences with WB222.
It doesn't completely /do/ bluetooth coexistence, because it turns out
I need to add some contigmalloc'ed buffers to the btcoex path for this
type of hardware. I'm putting this work in the "people would like
to see functioning-ish btcoex before FreeBSD-11" bucket because I see
this as "broken".
Tested:
* QCA9535 (WB335) NIC, BT + 2GHz STA
avoid panicking debug kernels.
t4_tom does not keep track of a connection once it switches to ULP mode
iWARP. If the connection falls out of ULP mode the driver/hardware seq#
etc. are out of sync. A better fix would be to figure out what the
current seq# are, update the driver's state, and perform all sanity
checks as usual.
This also prevents tracing to a P_INEXEC process since it could race
with other processes attaching to it in filemon_event_process_exec() due
to the filemon_get_proc() race of incrementing ref and then locking the
filemon. With the no-P_INEXEC invariant in place the p_filemon may only
be the same or NULL when trying to drop it in
filemon_event_process_exec().
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6545
In the EARLY_AP_STARTUP case the APs are already running when a taskqgroup
is created, so adjust the group at the same time it is created.
Sponsored by: Netflix
If the parent is DEAD or connect_request_upcall() fails, the parent
mutex is left locked. This leads to a hang when process_mpa_request()
is called again for another child of the listening endpoint.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Obtained from: upstream iw_cxgb4
Sponsored by: Chelsio Communications
The sys/types.h fix I proposed was only tested with zfs(4), not with
libzpool, which is where the build failure actually existed
Remove vm/vm_pageout.h from arc.c and zfs_vnops.c because they're both
unneeded
MFC after: 1 week
X-MFC with: r300865, r300870
In collaboration with: kib
Submitted by: alc
Sponsored by: EMC / Isilon Storage Division
ZFS's configuration needs to be updated whenever the physical path for a
device changes, but not when a new device is introduced. This is because new
devices necessarily cause config updates, but only if they are actually
accepted into the pool.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Split vdev_geom_set_physpath out of vdev_geom_attrchanged. When
setting the vdev's physical path, only request a config update if
the physical path has changed. Don't request it when opening a
device for the first time, because the config sync will happen
anyway upstack.
sys/geom/geom_dev.c
Split g_dev_set_physpath and g_dev_set_media out of
g_dev_attrchanged
Submitted by: will, asomers
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6428
sys/cam/scsi/scsi_xpt.c
Strip leading spaces off of a SCSI disk's reported serial number
when populating the CAM serial number. This affects the output of
"diskinfo -v" and the names of /dev/diskid/DISK-* device nodes,
among other things.
SPC5r05 says that the Product Serial Number field from the Unit
Serial Number VPD page is right-aligned. So any leading spaces are
not part of the actual serial number. Most devices don't left-pad
their serial numbers, but some do. In particular, the SN VPD page
that an LSI HBA emulates for a SATA drive contains enough
left-padding to fill a 20-byte field.
UPDATING
Add a note to UPDATING, because some users may have to update
/etc/fstab or geom labels.
Reviewed by: ken, mav
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6516
