1. There a was a typo in one place where the processor family is
checked (16 vs 0x16). Now the checks are consolidated in a single
function.
2. Instead of an array of struct amd_et_state objects the code allocated
an array of pointers. That was no problem on amd64 where the sizes
are the same, but could be a problem on i386.
Reported by: tuexen and others
Tested by: tuexen (earlier version of the fix)
Pointyhat to: avg
MFC after: 5 days
X-MFC with: r314636
Currently the feature is implemented only for a subset of errors
reported via Bank 4. The subset includes only DRAM-related errors.
The new code builds upon and reuses the Intel CMC (Correctable MCE
Counters) support code. However, the AMD feature is quite different
and, unfortunately, much less regular.
For references please see AMD BKDGs for models 10h - 16h.
Specifically, see MSR0000_0413 NB Machine Check Misc (Thresholding)
Register (MC4_MISC0).
http://developer.amd.com/resources/developer-guides-manuals/
Reviewed by: jhb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9613
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The extended LVT entries can be used to configure interrupt delivery
for various events that are internal to a processor and can use this
feature.
All current processors that support the feature have four of such entries.
The entries are all masked upon the processor reset, but it's possible
that firmware may use some of them.
BIOS and Kernel Developer's Guides for some processor models do not assign
any particular names to the extended LVTs, while other BKDGs provide names
and suggested usage for them.
However, there is no fixed mapping between the LVTs and the processor
events in any processor model that supports the feature. Any entry can be
assigned to any event. The assignment is done by programming an offset
of an entry into configuration bits corresponding to an event.
This change does not expose the flexibility that the feature offers.
The change adds just a single method to configure a hardcoded extended LVT
entry to deliver APIC_CMC_INT. The method is designed to be used with
Machine Check Error Thresholding mechanism on supported processor models.
For references please see BKDGs for families 10h - 16h and specifically
descriptions of APIC30, APIC400, APIC[530:500] registers.
For a description of the Error Thresholding mechanism see, for example,
BKDG for family 10h, section 2.12.1.6.
http://developer.amd.com/resources/developer-guides-manuals/
Thanks to jhb and kib for their suggestions.
Reviewed by: kib
Discussed with: jhb
MFC after: 5 weeks
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D9612
The fixed is used only to fix up buggy MPTable information and the
trigger mode is probably ignored for the relevant interrupt types
anyway. Still, it's better to be standards compliant and have the code
do what it says it does.
Discussed with: jhb
MFC after: 5 days
The ifdefs were '#if !defined(__i386__) || !defined(PC98)' previously,
so cpu_idle_acpi was enabled both i386 and amd64 except PC98.
I was obfuscated by '#if !defined(__i386__)' condition.
Submitted by: bde
Reported by: bde
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
We have an original panic. Then, instead of writing the core to the dump
device, the kernel has a second panic: "smp_targeted_tlb_shootdown:
interrupts disabled". This change is an attempt to fix that second panic.
When the other CPUs are stopped, we can't notify them of the TLB shootdown,
so we skip that operation. However, when the CPUs come back up, we
invalidate the TLB to ensure they correctly observe any changes to the
page mappings.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9786
On Core2 and older Intel CPUs, where TSC stops in C2, system does not
allow C2 entrance if timecounter hardware is TSC. This is done by
tc_windup() which tests for TC_FLAGS_C2STOP flag of the new
timecounter and increases cpu_disable_c2_sleep if flag is set. Right
now init_TSC_tc() only sets the flag if cpu_deepest_sleep >= 2, but
TSC is initialized too early for this variable to be set by
acpi_cpu.c.
There is no reason to require that ACPI reported C2 and deeper states
to set TC_FLAGS_C2STOP, so remove cpu_deepest_sleep test from
init_TSC_tc() condition. And since this is the only use of the
variable, remove it at all.
Reported and submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Suggested by: jhb
MFC after: 2 weeks
Use large enough type for calculation of mtrr physmask. Typical
cpu_maxphyaddr is 36 or larger.
Reported and tested by: sbruno
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
and there is no reason to check cpu family or vendor.
Noted by: royger
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9657
code. Also fix cast and remove unneeded XXX in comment.
Noted and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9657
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
This solves several problems.
First of all, cmc_throttle is specified in seconds and there was no
conversion between ticks and seconds when they were mixed together.
Second, we avoid potential problems with ticks wrapping around.
Resolution of time_uptime should be sufficient for the throttling
purposes.
Discussed with: jhb
MFC after: 12 days
Previously, if the threshold was changed, then MC_CTL2_CMCI_EN would get
cleared and the logic would switch to the polling only mode.
Discussed with: jhb
MFC after: 2 weeks
using the ACPI C1/mwait sleep method.
Previously, the mwait instruction would return when an interrupt was
pending; however, the idle loop did not actually enable interrupts when
this occurred. This led to a situation where the idle loop could quickly
spin through the C1/mwait sleep method a number of times when an interrupt
was pending. (Eventually, the situation corrected itself when something
other than an interrupt triggered the idle loop to either enable interrupts
or schedule another thread.)
Reviewed by: kib, imp (earlier version)
Input from: jhb
MFC after: 1 week
Sponsored by: Netflix
The types are for the byte offset and page index in vm object. They
are similar to off_t, which is defined as 64bit MI integer. Using MI
definitions will allow to provide consistent MD values of vm
object-related maximum sizes.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
and device npx.
This means that FPU is always initialized and handled when available,
and SSE+ register file and exception are handled when available. This
makes the kernel FPU code much easier to maintain by the cost of
slight bloat for CPUs older than 25 years.
CPU_DISABLE_CMPXCHG outlived its usefulness, see the removed comment
explaining the original purpose.
Suggested by and discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
These are of the few cases where we use the GCC non-null attributes in
non-header code. As part of a review [1] of our use of such attributes we
are replacing such uses of the overly aggressive GCC attribute with clang's
_Nonnull attribute.
In this case the attributes serve little purpose as they just don't
enforce run time checks, If anything the attributes would cause NULL pointer
checks to be ignored but there are no such checks so only effect is
cosmetic.
The references appear to be left over from code development and likely
already fulfilled their purpose.
Reference [1]:
https://reviews.freebsd.org/D9004
Reviewed by: jhb
MFC after: 3 weeks
Current Xen IPI setup functions require that the caller provide a device in
order to obtain the name of the interrupt from it. With early AP startup this
device is no longer available at the point where IPIs are bound, and a KASSERT
would trigger:
panic: NULL pcpu device_t
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff82233a20
vpanic() at vpanic+0x186/frame 0xffffffff82233aa0
kassert_panic() at kassert_panic+0x126/frame 0xffffffff82233b10
xen_setup_cpus() at xen_setup_cpus+0x5b/frame 0xffffffff82233b50
mi_startup() at mi_startup+0x118/frame 0xffffffff82233b70
btext() at btext+0x2c
Fix this by no longer requiring the presence of a device in order to bind IPIs,
and simply use the "cpuX" format where X is the CPU identifier in order to
describe the interrupt.
Reported by: sbruno, cperciva
Tested by: sbruno
X-MFC-With: r310177
Sponsored by: Citrix Systems R&D
This 6 times gettimeofday performance, as measured by
tools/tools/syscall_timing
Reviewed by: kib
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8789
The MCA taskqueue is not initialized until some time after CMCIs are
enabled on the BSP.
Reviewed by: cem, jhb
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8783
stack_machdep.c is compiled if either of the DDB or STACK options is
specified, but stack_save_td_running() isn't useable from DDB. Moreover,
stack_save_td_running() works by raising an NMI on the CPU running the
target thread, and the corresponding handler is compiled only if STACK is
configured.
Reported by: kib
MFC after: 1 week
actual numbers would help debugging (also, `MSR' and `ACPI' are standard
abbreviations and thus should be properly capitalized)
- Rephrase unsupported AMD CPUs message and wrap as an overly long line:
`sorry' 1) is wrongly spelled after period (starts with a small letter)
and 2) carries emotional "tinge" that is unnecessary and even bogus in
debug message; `implemented' is not the best word as `supported' suits
better in this context
- Improve readability when reporting resulted P-state transition (debug)
Approved by: jhb
(APIC-Timer-always-running) is not implemented.
If machine has ncpus >= 8 and non-FSB interrupt routing from HPET,
default HPET eventtimer quality 450 is reduced by 100, i.e. it is
350. On the other hand, LAPIC default quality is 600 and it is reduced
by 200 if ARAT is not reported. We end up with HPET quality 350 <
LAPIC quality 400, despite ARAT is not set. Then, since deep Cx
states are active by default, eventtimer fail.
E.g., on Nehalem Core i7 CPU and X58 chipset, LAPIC only works in
C0/C1/C1E and HPET does not implement FSB mode, which otherwise
requires manual switch to HPET to get working system.
Set LAPIC eventtimer quality to 100 if no ARAT.
While there, do not ignore deadlint TSC mode for LAPIC timer if ARAT
is not implemented. If user manually selected LAPIC eventtimer on
such CPU, there is no reason to not use deadline if available and not
disabled administratively.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
they shouldn't be.
I used this during driver bring-up to find that the Linux driver holds a
whole lot of locks whilst doing their equivalent of busdma operations.
If this works out well, it should be added to the other architecture busdma
implementations to aid in similar debugging.
Tested:
* bounce buffer and dmar busdma, Lenovo X230 laptop, all the internal
hardware
* ath(4) too
Discussed with: jhb
Add a reference count to xenisrc. This is required for implementation of
unmap-notifications in the grant table userspace device (gntdev). We need to
hold a reference to the event channel port, in case the user deallocates the
port before we send the notification.
Submitted by: jaggi
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D7429
Use the same logic to calculate the nominal CPU frequency from the P-state
MSRs on family 0x12, 0x15, and 0x16 CPUs as is used for family 0x10.
Family 0x14 was included in the original patch in the PR but I left that
out as the BIOS writer's guide for family 0x14 CPUs show a different layout
for the relevant MSR and include a different formulate for calculating the
frequency.
While here, simplify a few expressions and print out the family of
unsupported CPUs in hex rather than decimal.
PR: 212020
Submitted by: Anthony Jenkins <Scoobi_doo@yahoo.com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7587
Reject attempts to read from or memory map offsets in /dev/mem that are
beyond the maximum-supported physical address of the current CPU.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7408
- Make !KDB config buildable.
- Simplify interface to nmi_handle_intr() by evaluating panic_on_nmi
in one place, namely nmi_call_kdb(). This allows to remove do_panic
argument from the functions, and to remove i386/amd64 duplication of
the variable and sysctl definitions. Note that now NMI causes
panic(9) instead of trap_fatal() reporting and then panic(9),
consistently for NMIs delivered while CPU operated in ring 0 and 3.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On several Intel chipsets, diagnostic NMIs sent from BMC or NMIs
reporting hardware errors are broadcasted to all CPUs.
When kernel is configured to enter kdb on NMI, the outcome is
problematic, because each CPU tries to enter kdb. All CPUs are
executing NMI handlers, which set the latches disabling the nested NMI
delivery; this means that stop_cpus_hard(), used by kdb_enter() to
stop other cpus by broadcasting IPI_STOP_HARD NMI, cannot work. One
indication of this is the harmless but annoying diagnostic "timeout
stopping cpus".
Much more harming behaviour is that because all CPUs try to enter kdb,
and if ddb is used as debugger, all CPUs issue prompt on console and
race for the input, not to mention the simultaneous use of the ddb
shared state.
Try to fix this by introducing a pseudo-lock for simultaneous attempts
to handle NMIs. If one core happens to enter NMI trap handler, other
cores see it and simulate reception of the IPI_STOP_HARD. More,
generic_stop_cpus() avoids sending IPI_STOP_HARD and avoids waiting
for the acknowledgement, relying on the nmi handler on other cores
suspending and then restarting the CPU.
Since it is impossible to detect at runtime whether some stray NMI is
broadcast or unicast, add a knob for administrator (really developer)
to configure debugging NMI handling mode.
The updated patch was debugged with the help from Andrey Gapon (avg)
and discussed with him.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8249
All I/O APIC pins are masked when an I/O APIC is first probed. The
APIC enumerator (MP Table or MADT) then parses its associated tables to
configure individual pins to set custom delivery modes or alternate
routing (e.g. routing IRQ 0 to intpin 2). Pins for regular interrupt
pins are left masked until the first interrupt is assigned. However,
pins with unusual settings (e.g. NMI or SMI) are never assigned an
interrupt and thus never re-programmed. The I/O APIC code used to
reprogram all interrupt pins during registration but this was lost in
r151979.
In theory, this is mostly a no-op as the ACPI APIC table does not
include a way to enumerate NMI or SMI pins for the I/O APIC, so only
systems using an MP Table would be affected.
Reported by: avg
MFC after: 1 month
Reduce the cost of TLB invalidation on x86 by using per-CPU completion flags
Reduce contention during TLB invalidation operations by using a per-CPU
completion flag, rather than a single atomically-updated variable.
On a Westmere system (2 sockets x 4 cores x 1 threads), dtrace measurements
show that smp_tlb_shootdown is about 50% faster with this patch; observations
with VTune show that the percentage of time spent in invlrng_single_page on an
interrupt (actually doing invalidation, rather than synchronization) increases
from 31% with the old mechanism to 71% with the new one. (Running a basic file
server workload.)
Submitted by: Anton Rang <rang at acm.org>
Reviewed by: cem (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8041
