Fixed the MAKEDEV pattern for SCSI processor type driver so it doesn't
screw up ptys. Does anyone want to suggest a better name than "pt0" for
SCSI processor devices before 2.1?
Support sliced devices better. E.g.:
`sh MAKEDEV sd0' creates [r]sd0 and [r]sd0s[1-4] as well as [r]sd0[a-h]
(the extra devices created by default won't hurt apart from wasting inodes).
`sh MAKEDEV sd0s1[a-h]' creates [r]sd0s1[a-h] (any partition creates all).
`sh MAKEDEV sd0s5' creates [r]sd0s5.
Support unit numbers 0-31 (was 0-6).
For wd:
Remove support for creating DOSpartitions wd*[i-m]. These will get removed
if you run MAKEDEV on `all' or on wd*.
o Supporting SYNC SIO device (But need a device driver)
- add "set speed sync"
o Fixing bug for Predictor-1 function.
o Add new parameter that re-sent interval for set timeout commands.
o Improving RTT (Round Trip Time) and reducing processor time.
- Previous Timer service was using polling, and now using
SIGALRM ;-)
- A 0.94beta2 will not work correctly....
-- Follows are additinal feature not including 0.94beta2
o Support Proxy ARP
- add "enable/disable proxy" commands
o Marging common routine in CHAP/PAP.
o Enhancing LCP/IPCP log information.
o Support local Authfication connection on port 300x and tty.
- You can set up pair of your "hostname -s" and
password in ppp.secret. if either ppp.secret file nor
your hostname line don't exist, It will notify a message
and working as same as previous version.(Backword compatibility)
- If you did set up them, It's allow connection but nothing to do
except help and passwd command.
- add "passwd yourpasswd" commands
o Support afilter - keep Alive filter that a packet can send/receiving
according to ifilter/ofilter but doesn't count it as preventing idle
timer expires.
- Same syntax of other filters.
o Fixing bugs reported by current user for previous one. Thanks !!
Reviewed by: Atsushi Murai (amurai@spec.co.jp)
444 -> root.wheel
root -> root.wheel
uucp -> uucp.wheel (perhaps this should be .dialer, but .wheel is safer)
missing -> root.wheel
chown to root is usually bogus because mknod had to be run by root to
create the inode. Setting the group explictly is currently necessary
because MAKEDEV does nothing to ensure that its working directory has
a suitable group.
Driver authors! Please fix any bogons in MAKEDEV that involve your
drivers. The sound devices are still world writable...
for now (there are too many minors to create by default). The special
sliced disk case ssd*|svn*|swd*) can almost replace the standard disk
case sd*|vn*|wd*) now (it just creates a few more devices), but there
will have to be special cases to allow creating slices 6-31 and partitions
on slices 2-31.
Fix bogus default cases.
Add the `lc' option to default. Having getty understand the issues of
CAPS-only terminals is a nop these days, but `lc' avoids hassles for
people with CAPS-only user names.
Suggested by: Don Yuniskis
weekly:
Modify the call to makewhatis, now that our makewhatis can take the
entire ${MANPATH} as a single argument.
The group was wrong if MAKEDEV was run in a directory with group other
than wheel. This may have messed up the group in recent SNAPs
(sysinstall/obj should have group bin).
Reset the umask to 77 after running MAKEDEV.local. Some cases depend on
the 77 default. MAKEDEV.local and all cases should probably set the
umask explictly and not depend on a default. Most cases already set it.
1) ypserv is started with nis_serverflags, not yppasswddflags (that's what
I get for cutting & pasting without paying attention).
2) ypbind can also be started with arguments, so turn nis_client to
nis_clientflags.
safe way to do this, and envites very unpleasant results. Removed fsck'ing
of all the disks on the system as it provides output that is almost always
meaningless and only envites bug reports.
Reviewed by: Jordan Hubbard
match all the port names.
Start using shell functions to avoid duplication.
Make tty* independent of cua*. Restore support for old names (tty0 ==
ttyd0, cua0 = cuaa0...).
Restore making of lpt1 and lpt2 by default.
Keep umask 077 for making vty*. World-ioctable vtys are huge security holes
because of bugs in syscons.
Make vga if a vty is made. It may still be required for X. It got nuked
with pc*.
Start using umask consistently to avoid using chmod.
file anymore after this. My link makes it too painful to make
interactive mods, and I don't have the CVS tree here so making changes
for "previous history" have to get done on freefall, with the corresponding
degree of pain.
|Message-Id: <199412011713.JAA03374@timesink.spk.wa.us>
|To: jkh@whisker.hubbard.ie
|Subject: A little problem with MAKEDEV
|
|For a while now, MAKEDEV's been kinda neat: you create the cua* files,
|and it deletes the tty* files; you create the tty* files and it
|deletes the corresponding cua* files. K00l! :-)
[Ed Note - I think this behavior was wrong, and this fix better].
created by Amancio Hasty (specificly, this, in conjunction with his sound
driver mods for dual-mode DMA will allow VAT compiled for BSD/386 1.1 to
run under FreeBSD 2.x.)
Leave a warning to the sysop if (s)he didn't yet
enable the /tmp cleanup code.
Made `core' in the cleanup template look `*.core'.
Replace `df -k' by `df -k -t local', since the stats
for kernfs, procfs etc. are not of much interest, and
the inclusion of nfs systems might hang the machine (nor is it a
`disk' statistic as the headline's telling).
weekly:
Modified the locate.updatedb part to work even if there's no
database yet; report errors other than `Permission denied' instead
of silently ignoring all of them.
Added functionality to rebuild the whatis database once a week.
make.conf: Pulled in the following changes that had been commited
to share/examples/etc:
----------------------------
revision 1.6
date: 1994/09/20 22:30:33; author: adam; state: Exp; lines: +3 -3
BOOTWAIT example converted to milliseconds calibration
----------------------------
revision 1.4
date: 1994/09/19 21:35:28; author: wollman; state: Exp; lines: +7 -1
Document NO_SHARED_LIBCC_INT.
----------------------------
revision 1.3
date: 1994/09/19 21:28:11; author: wollman; state: Exp; lines: +12 -17
Install /etc from the same source as /usr/share/examples/etc (mostly).
----------------------------
revision 1.2
date: 1994/09/19 02:05:08; author: ache; state: Exp; lines: +1 -11
Remove STARTUP_LOCALE, obsoleted now
----------------------------
revision 1.1
date: 1994/09/08 19:08:59; author: jkh; state: Exp;
Add a sample make.conf. Also document the new X11BASE variable, and
expand some of the documentation for other entries.
Submitted by: jkh
----------------------------
manpath.config: Pulled down from Attic, and merged share/examples/etc
changes.
rc: Pulled in the following change from share/examples/etc:
----------------------------
revision 1.2
date: 1994/09/19 23:13:37; author: ache; state: Exp; lines: +1 -2
Remove warning about adjkerntz /var/run file
----------------------------
make.conf: Pulled in the following changes that had been commited
to share/examples/etc:
----------------------------
revision 1.6
date: 1994/09/20 22:30:33; author: adam; state: Exp; lines: +3 -3
BOOTWAIT example converted to milliseconds calibration
----------------------------
revision 1.4
date: 1994/09/19 21:35:28; author: wollman; state: Exp; lines: +7 -1
Document NO_SHARED_LIBCC_INT.
----------------------------
revision 1.3
date: 1994/09/19 21:28:11; author: wollman; state: Exp; lines: +12 -17
Install /etc from the same source as /usr/share/examples/etc (mostly).
----------------------------
revision 1.2
date: 1994/09/19 02:05:08; author: ache; state: Exp; lines: +1 -11
Remove STARTUP_LOCALE, obsoleted now
----------------------------
revision 1.1
date: 1994/09/08 19:08:59; author: jkh; state: Exp;
Add a sample make.conf. Also document the new X11BASE variable, and
expand some of the documentation for other entries.
Submitted by: jkh
----------------------------
manpath.config: Pulled down from Attic, and merged share/examples/etc
changes.
rc: Pulled in the following change from share/examples/etc:
----------------------------
revision 1.2
date: 1994/09/19 23:13:37; author: ache; state: Exp; lines: +1 -2
Remove warning about adjkerntz /var/run file
----------------------------
new mtree options.
I will be updating these shortly to remove some old stuff and add some
new stuff. These currently produce the exact same trees as they did.
arrange for that directory to get created by mtree. Also, process secure
directory after all the others, because the programs there may overlay
ones installed from the main part of the tree.
2. Make this say it is 2.0.0 (Development).
3. Update the stty commands to say ^H for erase.
4. Update the disklabel commands to use the new 4.4 syntax.
2. Update the COPYRIGHT= to be just the COPYRIGHT file for now.
3. Fully parameterize the floppy device being used. This is needed right
now so I can at least build these on 1.44 until it all is working, then
I will have to find a way to get them back down to size.
4. Remove mount_pcfs from the filesystem floppy, we don't have that yet.
5. Update the shared libraries t obe copied. This should now work for
this and all future releases.
6. Reduce the CRYPT_SRCS down to the few static binaries that have crypt
in them.
7. Change all references for the kernel from /386bsd to /kernel.
8. For some reason umount is returning 1, use a - until I can find out why.
9. Update the disklabel commands to be 4.4 syntax.
10. Remove the ugly elvis wart, we don't have elvis anymore.
11. Use the -d (directories only) option on the mtree commands. This
greatly reduces the noise from distrib-dirs:.
12. Note the fact that the mtree commands need a wrapper around them as they
return a status of 2 if the tree was modified and the make should not
exit on that condition.
13. Add a trailing slash on the chflags command as ${RELEASEDIR} may be
a symbolic link.
Changed the everlenghtening list of "if [ -f /etc/hostname.foo ].." to a
loop which will do them all, and look for init-scripts for them as well.
perfect place to put your calls to slattach and such: /etc/start_if.sl0
for instance.
you MUST add the directory name and the .. entry to close the directory.
If you do not understand mtree files, do not modify them, it is very
easy to trash someones box with a mistake in here. Especially with
regards to .. entries.
some file names.
2. Add MAKEDEVS= that does all the /dev population so that this is not
duplicated in 2 or 3 places. Helps to keep it in sync too. Cleaned
up and fixed to not overflow inode tables.
3. Fix paths to the 2 crypt versions.
4. Init is sbin/init now instead of sbin/init.bsdi.
5. bdes is now in secure/usr.bin, will need to do something about telnet.
6. Incorporate 1.1.5.1 patches for EXTRACT.sh files.
7. Correct calls to make kcopy-flooppy to work with or without obj/.
8. Reorder src-clean: target so that it does not destroy the real obj
tree, but does rip out junk and obj links.
9. Incorporate 1.1.5.1 patche for srcbin tarball name.
10. Add chflags command to release-dirs target so the rm -rf can have a
chance to work.
With this and a few more commits I will have 2.0 bin tarballs.
be installed on, so they should be in /dev as well.
Removed the smoking remains of dcf*. I didn't realize that it had made it
into MAKEDEV. Gone from cdevsw long time ago, gone from /dev now.
the choice of building with the password scrambler or the DES
libraries. Folks outside the US can simply drop in the other
DES libraries. (stupid laws...)
Everything still keys off of the old NOCRYPT variable so building
a portable distribution remains the same.
Submitted by: pst
actually have a printer connected or online:
- MAKEDEV: remove all signs of lpa
add lpctl? devices (minor # = unit + 128)
- usr.sbin/Makefile add lptcontrol
- sys/i386/isa/lpt.c implement the LP_BYPASS flag: when a unit is
opened with this flag set, the printer is
not primed, and no check is made to see that
the printer is online. This can only be used
to pass ioctls. (giving us /dev/lpctl?)
- lptcontrol.c use /dev/lpctl? (LP_BYPASS)
-f flag removed, -u flag added
- lptcontrol.8 document changes in lptcontrol
rewrite using mandoc macros
Submitted by: Geoff.
1. Use ${MAKE} everywhere again. Whoops.
2. Replace multiple invocations of gzip ... split ... with one variable.
3. Add src-clean target for making the src tree presentable before
making a src tarball out of it.
upon disk type. In far more cases than not this is the optimal setting
for any disk drive made after 1990.
This now means all installs will have the disks newfs'ed with either:
newfs -b 8192 -f 1024 -d 0 -n 1
or
newfs -n 4096 -f 512 -d 0 -n 1
depending on what the user chooses for the blocking factor.
date!!) and rename them to something more eye-catching so people will read them
again (considering the previous state of affairs, I'm actually rather glad they didn't!).
1. Add to secr and bindists to possibly save the occasional fool who
doesn't RTFM and uses the wrong command to extract this (or even someone
who's legitimately using this to extract on top of a bindist somewhere
*else*).
2. Do the right thing with any symlinks in the src tree. Right now, we're
free of the buggers, but just in case.
