Commit Graph

438 Commits

Author SHA1 Message Date
Mateusz Guzik
662c13053f net: clean up empty lines in .c and .h files 2020-09-01 21:19:14 +00:00
John Baldwin
dae61c9d09 Simplify IPsec transform-specific teardown.
- Rename from the teardown callback from 'zeroize' to 'cleanup' since
  this no longer zeroes keys.

- Change the callback return type to void.  Nothing checked the return
  value and it was always zero.

- Don't have esp call into ah since it no longer needs to depend on
  this to clear the auth key.  Instead, both are now private and
  self-contained.

Reviewed by:	delphij
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D25443
2020-06-25 23:59:16 +00:00
John Baldwin
f82eb2a6f0 Enter and exit the network epoch for async IPsec callbacks.
When an IPsec packet has been encrypted or decrypted, the next step in
the packet's traversal through the network stack is invoked from a
crypto worker thread, not from the original calling thread.  These
threads need to enter the network epoch before passing packets down to
IP output routines or up to transport protocols.

Reviewed by:	ae
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D25444
2020-06-25 23:57:30 +00:00
John Baldwin
20869b25cc Use zfree() to explicitly zero IPsec keys.
Reviewed by:	delphij
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D25442
2020-06-25 20:31:06 +00:00
Mark Johnston
95033af923 Add the SCTP_SUPPORT kernel option.
This is in preparation for enabling a loadable SCTP stack.  Analogous to
IPSEC/IPSEC_SUPPORT, the SCTP_SUPPORT kernel option must be configured
in order to support a loadable SCTP implementation.

Discussed with:	tuexen
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2020-06-18 19:32:34 +00:00
John Baldwin
28d2a72bbf Consistently include opt_ipsec.h for consumers of <netipsec/ipsec.h>.
This fixes ipsec.ko to include all of IPSEC_DEBUG.

Reviewed by:	imp
MFC after:	2 weeks
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D25046
2020-05-29 19:22:40 +00:00
Marcin Wojtas
b01edfb515 Fix AES-CTR compatibility issue in ipsec
r361390 decreased blocksize of AES-CTR from 16 to 1.
Because of that ESP payload is no longer aligned to 16 bytes
before being encrypted and sent.
This is a good change since RFC3686 specifies that the last block
doesn't need to be aligned.
Since FreeBSD before r361390 couldn't decrypt partial blocks encrypted
with AES-CTR we need to enforce 16 byte alignment in order to preserve
compatibility.
Add a sysctl(on by default) to control it.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D24999
2020-05-26 14:16:26 +00:00
John Baldwin
9c0e3d3a53 Add support for optional separate output buffers to in-kernel crypto.
Some crypto consumers such as GELI and KTLS for file-backed sendfile
need to store their output in a separate buffer from the input.
Currently these consumers copy the contents of the input buffer into
the output buffer and queue an in-place crypto operation on the output
buffer.  Using a separate output buffer avoids this copy.

- Create a new 'struct crypto_buffer' describing a crypto buffer
  containing a type and type-specific fields.  crp_ilen is gone,
  instead buffers that use a flat kernel buffer have a cb_buf_len
  field for their length.  The length of other buffer types is
  inferred from the backing store (e.g. uio_resid for a uio).
  Requests now have two such structures: crp_buf for the input buffer,
  and crp_obuf for the output buffer.

- Consumers now use helper functions (crypto_use_*,
  e.g. crypto_use_mbuf()) to configure the input buffer.  If an output
  buffer is not configured, the request still modifies the input
  buffer in-place.  A consumer uses a second set of helper functions
  (crypto_use_output_*) to configure an output buffer.

- Consumers must request support for separate output buffers when
  creating a crypto session via the CSP_F_SEPARATE_OUTPUT flag and are
  only permitted to queue a request with a separate output buffer on
  sessions with this flag set.  Existing drivers already reject
  sessions with unknown flags, so this permits drivers to be modified
  to support this extension without requiring all drivers to change.

- Several data-related functions now have matching versions that
  operate on an explicit buffer (e.g. crypto_apply_buf,
  crypto_contiguous_subsegment_buf, bus_dma_load_crp_buf).

- Most of the existing data-related functions operate on the input
  buffer.  However crypto_copyback always writes to the output buffer
  if a request uses a separate output buffer.

- For the regions in input/output buffers, the following conventions
  are followed:
  - AAD and IV are always present in input only and their
    fields are offsets into the input buffer.
  - payload is always present in both buffers.  If a request uses a
    separate output buffer, it must set a new crp_payload_start_output
    field to the offset of the payload in the output buffer.
  - digest is in the input buffer for verify operations, and in the
    output buffer for compute operations.  crp_digest_start is relative
    to the appropriate buffer.

- Add a crypto buffer cursor abstraction.  This is a more general form
  of some bits in the cryptosoft driver that tried to always use uio's.
  However, compared to the original code, this avoids rewalking the uio
  iovec array for requests with multiple vectors.  It also avoids
  allocate an iovec array for mbufs and populating it by instead walking
  the mbuf chain directly.

- Update the cryptosoft(4) driver to support separate output buffers
  making use of the cursor abstraction.

Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D24545
2020-05-25 22:12:04 +00:00
John Baldwin
897e43124e Don't pass bogus keys down for NULL algorithms.
The changes in r359374 added various sanity checks in sessions and
requests created by crypto consumers in part to permit backend drivers
to make assumptions instead of duplicating checks for various edge
cases.  One of the new checks was to reject sessions which provide a
pointer to a key while claiming the key is zero bits long.

IPsec ESP tripped over this as it passes along whatever key is
provided for NULL, including a pointer to a zero-length key when an
empty string ("") is used with setkey(8).  One option would be to
teach the IPsec key layer to not allocate keys of zero length, but I
went with a simpler fix of just not passing any keys down and always
using a key length of zero for NULL algorithms.

PR:		245832
Reported by:	CI
2020-05-02 01:00:29 +00:00
John Baldwin
16aabb761c Remove support for IPsec algorithms deprecated in r348205 and r360202.
Examples of depecrated algorithms in manual pages and sample configs
are updated where relevant.  I removed the one example of combining
ESP and AH (vs using a cipher and auth in ESP) as RFC 8221 says this
combination is NOT RECOMMENDED.

Specifically, this removes support for the following ciphers:
- des-cbc
- 3des-cbc
- blowfish-cbc
- cast128-cbc
- des-deriv
- des-32iv
- camellia-cbc

This also removes support for the following authentication algorithms:
- hmac-md5
- keyed-md5
- keyed-sha1
- hmac-ripemd160

Reviewed by:	cem, gnn (older verisons)
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D24342
2020-05-02 00:06:58 +00:00
John Baldwin
69a3eb6223 Fix name of 3DES cipher in deprecation warning.
Submitted by:	cem
MFC after:	1 week
2020-04-22 21:03:24 +00:00
John Baldwin
e27a9ad8e6 Deprecate 3des support in IPsec for FreeBSD 13.
RFC 8221 does not outright ban 3des as the algorithms deprecated for
13 in r348205, but it is listed as a SHOULD NOT and will likely be a
MUST NOT by the time 13 ships.

Discussed with:	bjk
MFC after:	1 week
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D24341
2020-04-22 19:44:33 +00:00
John Baldwin
c161c46d4c Update comments about IVs used in IPsec ESP.
Add some prose and a diagram describing the layout of the cipher IV
for AES-CTR and AES-GCM and how it relates to the ESP IV stored in the
packet after the ESP header.  Also, remove an XXX comment about the
initial block counter value used for AES-CTR in esp_output as the
current code matches the RFC (and the equivalent code in esp_input
didn't have the XXX comment).

Discussed with:	cem
2020-04-20 22:57:15 +00:00
John Baldwin
8cbde41419 Generate IVs directly in esp_output.
This is the only place that uses CRYPTO_F_IV_GENERATE.  All crypto
drivers currently duplicate the same boilerplate code to handle this
case.  Doing the generation directly removes complexity from drivers.
It also simplifies support for separate input and output buffers.

Reviewed by:	cem
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D24449
2020-04-20 22:20:26 +00:00
John Baldwin
c034143269 Refactor driver and consumer interfaces for OCF (in-kernel crypto).
- The linked list of cryptoini structures used in session
  initialization is replaced with a new flat structure: struct
  crypto_session_params.  This session includes a new mode to define
  how the other fields should be interpreted.  Available modes
  include:

  - COMPRESS (for compression/decompression)
  - CIPHER (for simply encryption/decryption)
  - DIGEST (computing and verifying digests)
  - AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
  - ETA (combined auth and encryption using encrypt-then-authenticate)

  Additional modes could be added in the future (e.g. if we wanted to
  support TLS MtE for AES-CBC in the kernel we could add a new mode
  for that.  TLS modes might also affect how AAD is interpreted, etc.)

  The flat structure also includes the key lengths and algorithms as
  before.  However, code doesn't have to walk the linked list and
  switch on the algorithm to determine which key is the auth key vs
  encryption key.  The 'csp_auth_*' fields are always used for auth
  keys and settings and 'csp_cipher_*' for cipher.  (Compression
  algorithms are stored in csp_cipher_alg.)

- Drivers no longer register a list of supported algorithms.  This
  doesn't quite work when you factor in modes (e.g. a driver might
  support both AES-CBC and SHA2-256-HMAC separately but not combined
  for ETA).  Instead, a new 'crypto_probesession' method has been
  added to the kobj interface for symmteric crypto drivers.  This
  method returns a negative value on success (similar to how
  device_probe works) and the crypto framework uses this value to pick
  the "best" driver.  There are three constants for hardware
  (e.g. ccr), accelerated software (e.g. aesni), and plain software
  (cryptosoft) that give preference in that order.  One effect of this
  is that if you request only hardware when creating a new session,
  you will no longer get a session using accelerated software.
  Another effect is that the default setting to disallow software
  crypto via /dev/crypto now disables accelerated software.

  Once a driver is chosen, 'crypto_newsession' is invoked as before.

- Crypto operations are now solely described by the flat 'cryptop'
  structure.  The linked list of descriptors has been removed.

  A separate enum has been added to describe the type of data buffer
  in use instead of using CRYPTO_F_* flags to make it easier to add
  more types in the future if needed (e.g. wired userspace buffers for
  zero-copy).  It will also make it easier to re-introduce separate
  input and output buffers (in-kernel TLS would benefit from this).

  Try to make the flags related to IV handling less insane:

  - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
    member of the operation structure.  If this flag is not set, the
    IV is stored in the data buffer at the 'crp_iv_start' offset.

  - CRYPTO_F_IV_GENERATE means that a random IV should be generated
    and stored into the data buffer.  This cannot be used with
    CRYPTO_F_IV_SEPARATE.

  If a consumer wants to deal with explicit vs implicit IVs, etc. it
  can always generate the IV however it needs and store partial IVs in
  the buffer and the full IV/nonce in crp_iv and set
  CRYPTO_F_IV_SEPARATE.

  The layout of the buffer is now described via fields in cryptop.
  crp_aad_start and crp_aad_length define the boundaries of any AAD.
  Previously with GCM and CCM you defined an auth crd with this range,
  but for ETA your auth crd had to span both the AAD and plaintext
  (and they had to be adjacent).

  crp_payload_start and crp_payload_length define the boundaries of
  the plaintext/ciphertext.  Modes that only do a single operation
  (COMPRESS, CIPHER, DIGEST) should only use this region and leave the
  AAD region empty.

  If a digest is present (or should be generated), it's starting
  location is marked by crp_digest_start.

  Instead of using the CRD_F_ENCRYPT flag to determine the direction
  of the operation, cryptop now includes an 'op' field defining the
  operation to perform.  For digests I've added a new VERIFY digest
  mode which assumes a digest is present in the input and fails the
  request with EBADMSG if it doesn't match the internally-computed
  digest.  GCM and CCM already assumed this, and the new AEAD mode
  requires this for decryption.  The new ETA mode now also requires
  this for decryption, so IPsec and GELI no longer do their own
  authentication verification.  Simple DIGEST operations can also do
  this, though there are no in-tree consumers.

  To eventually support some refcounting to close races, the session
  cookie is now passed to crypto_getop() and clients should no longer
  set crp_sesssion directly.

- Assymteric crypto operation structures should be allocated via
  crypto_getkreq() and freed via crypto_freekreq().  This permits the
  crypto layer to track open asym requests and close races with a
  driver trying to unregister while asym requests are in flight.

- crypto_copyback, crypto_copydata, crypto_apply, and
  crypto_contiguous_subsegment now accept the 'crp' object as the
  first parameter instead of individual members.  This makes it easier
  to deal with different buffer types in the future as well as
  separate input and output buffers.  It's also simpler for driver
  writers to use.

- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
  This understands the various types of buffers so that drivers that
  use DMA do not have to be aware of different buffer types.

- Helper routines now exist to build an auth context for HMAC IPAD
  and OPAD.  This reduces some duplicated work among drivers.

- Key buffers are now treated as const throughout the framework and in
  device drivers.  However, session key buffers provided when a session
  is created are expected to remain alive for the duration of the
  session.

- GCM and CCM sessions now only specify a cipher algorithm and a cipher
  key.  The redundant auth information is not needed or used.

- For cryptosoft, split up the code a bit such that the 'process'
  callback now invokes a function pointer in the session.  This
  function pointer is set based on the mode (in effect) though it
  simplifies a few edge cases that would otherwise be in the switch in
  'process'.

  It does split up GCM vs CCM which I think is more readable even if there
  is some duplication.

- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
  as an auth algorithm and updated cryptocheck to work with it.

- Combined cipher and auth sessions via /dev/crypto now always use ETA
  mode.  The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
  This was actually documented as being true in crypto(4) before, but
  the code had not implemented this before I added the CIPHER_FIRST
  flag.

- I have not yet updated /dev/crypto to be aware of explicit modes for
  sessions.  I will probably do that at some point in the future as well
  as teach it about IV/nonce and tag lengths for AEAD so we can support
  all of the NIST KAT tests for GCM and CCM.

- I've split up the exising crypto.9 manpage into several pages
  of which many are written from scratch.

- I have converted all drivers and consumers in the tree and verified
  that they compile, but I have not tested all of them.  I have tested
  the following drivers:

  - cryptosoft
  - aesni (AES only)
  - blake2
  - ccr

  and the following consumers:

  - cryptodev
  - IPsec
  - ktls_ocf
  - GELI (lightly)

  I have not tested the following:

  - ccp
  - aesni with sha
  - hifn
  - kgssapi_krb5
  - ubsec
  - padlock
  - safe
  - armv8_crypto (aarch64)
  - glxsb (i386)
  - sec (ppc)
  - cesa (armv7)
  - cryptocteon (mips64)
  - nlmsec (mips64)

Discussed with:	cem
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00
Pawel Biernacki
7029da5c36 Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.  All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by:	kib (mentor, blanket)
Commented by:	kib, gallatin, melifaro
Differential Revision:	https://reviews.freebsd.org/D23718
2020-02-26 14:26:36 +00:00
Mateusz Guzik
9fd552ada1 netipsec: fix a mismatched uma_zfree -> uma_zfree_pcpu
PR:		244077
Reported by:	lwhsu
Fixes: r357805 ("amd64: store per-cpu allocations subtracted by __pcpu")
2020-02-12 20:18:29 +00:00
Bjoern A. Zeeb
a4adf6cc65 Fix m_pullup() problem after removing PULLDOWN_TESTs and KAME EXT_*macros.
r354748-354750 replaced the KAME macros with m_pulldown() calls.
Contrary to the rest of the network stack m_len checks before m_pulldown()
were not put in placed (see r354748).
Put these m_len checks in place for now (to go along with the style of the
network stack since the initial commits).  These are not put in for
performance but to avoid an error scenario (even though it also will help
performance at the moment as it avoid allocating an extra mbuf; not because
of the unconditional function call).

The observed error case went like this:
(1) an mbuf with M_EXT arrives and we call m_pullup() unconditionally on it.
(2) m_pullup() will call m_get() unless the requested length is larger than
MHLEN (in which case it'll m_freem() the perfectly fine mbuf) and migrate the
requested length of data and pkthdr into the new mbuf.
(3) If m_get() succeeds, a further m_pullup() call going over MHLEN will fail.
This was observed with failing auto-configuration as an RA packet of
200 bytes exceeded MHLEN and the m_pullup() called from nd6_ra_input()
dropped the mbuf.
(Re-)adding the m_len checks before m_pullup() calls avoids this problems
with mbufs using external storage for now.

MFC after:	3 weeks
Sponsored by:	Netflix
2019-12-01 00:22:04 +00:00
Andrey V. Elsukov
3f44ee8e99 Add support for dummy ESP packets with next header field equal to
IPPROTO_NONE.

According to RFC4303 2.6 they should be silently dropped.

Submitted by:	aurelien.cazuc.external_stormshield.eu
MFC after:	10 days
Sponsored by:	Stormshield
Differential Revision:	https://reviews.freebsd.org/D22557
2019-11-27 10:24:46 +00:00
Bjoern A. Zeeb
63abacc204 netinet*: replace IP6_EXTHDR_GET()
In a few places we have IP6_EXTHDR_GET() left in upper layer protocols.
The IP6_EXTHDR_GET() macro might perform an m_pulldown() in case the data
fragment is not contiguous.

Convert these last remaining instances into m_pullup()s instead.
In CARP, for example, we will a few lines later call m_pullup() anyway,
the IPsec code coming from OpenBSD would otherwise have done the m_pullup()
and are copying the data a bit later anyway, so pulling it in seems no
better or worse.

Note: this leaves very few m_pulldown() cases behind in the tree and we
might want to consider removing them as well to make mbuf management
easier again on a path to variable size mbufs, especially given
m_pulldown() still has an issue not re-checking M_WRITEABLE().

Reviewed by:	gallatin
MFC after:	8 weeks
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D22335
2019-11-15 21:44:17 +00:00
Gleb Smirnoff
b8a6e03fac Widen NET_EPOCH coverage.
When epoch(9) was introduced to network stack, it was basically
dropped in place of existing locking, which was mutexes and
rwlocks. For the sake of performance mutex covered areas were
as small as possible, so became epoch covered areas.

However, epoch doesn't introduce any contention, it just delays
memory reclaim. So, there is no point to minimise epoch covered
areas in sense of performance. Meanwhile entering/exiting epoch
also has non-zero CPU usage, so doing this less often is a win.

Not the least is also code maintainability. In the new paradigm
we can assume that at any stage of processing a packet, we are
inside network epoch. This makes coding both input and output
path way easier.

On output path we already enter epoch quite early - in the
ip_output(), in the ip6_output().

This patch does the same for the input path. All ISR processing,
network related callouts, other ways of packet injection to the
network stack shall be performed in net_epoch. Any leaf function
that walks network configuration now asserts epoch.

Tricky part is configuration code paths - ioctls, sysctls. They
also call into leaf functions, so some need to be changed.

This patch would introduce more epoch recursions (see EPOCH_TRACE)
than we had before. They will be cleaned up separately, as several
of them aren't trivial. Note, that unlike a lock recursion the
epoch recursion is safe and just wastes a bit of resources.

Reviewed by:	gallatin, hselasky, cy, adrian, kristof
Differential Revision:	https://reviews.freebsd.org/D19111
2019-10-07 22:40:05 +00:00
Fabien Thomas
d5f39c34a6 Fix broken window replay check that will allow old packet to be accepted.
This was introduced in r309144.

Submitted by:	Jean-Francois HREN <jean-francois.hren@stormshield.eu>
Approved by:	ae@
MFC after:	3 days
2019-09-06 14:30:23 +00:00
Andrey V. Elsukov
bf1a213c07 Add missing new line in several log messages.
PR:		239694
MFC after:	1 week
2019-08-09 08:58:09 +00:00
Ryan Libby
0e2464ea18 netipsec key_register: check for M_NOWAIT alloc failure
Reviewed by:	ae, cem
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20742
2019-06-25 15:43:52 +00:00
John Baldwin
0f70218343 Make the warning intervals for deprecated crypto algorithms tunable.
New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings.  The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI

Reviewed by:	cem
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D20555
2019-06-11 23:00:55 +00:00
John Baldwin
c2fd516f3a Add deprecation warnings for IPsec algorithms deprecated in RFC 8221.
All of these algorithms are either explicitly marked MUST NOT, or they
are implicitly MUST NOTs by virtue of not being included in IETF's
list of protocols at all despite having assignments from IANA.

Specifically, this adds warnings for the following ciphers:
- des-cbc
- blowfish-cbc
- cast128-cbc
- des-deriv
- des-32iv
- camellia-cbc

Warnings for the following authentication algorithms are also added:
- hmac-md5
- keyed-md5
- keyed-sha1
- hmac-ripemd160

Reviewed by:	cem, gnn
MFC after:	3 days
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D20340
2019-05-23 22:06:57 +00:00
Conrad Meyer
a8a16c7128 Replace read_random(9) with more appropriate arc4rand(9) KPIs
Reviewed by:	ae, delphij
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D19760
2019-04-04 01:02:50 +00:00
Mateusz Guzik
cc426dd319 Remove unused argument to priv_check_cred.
Patch mostly generated with cocinnelle:

@@
expression E1,E2;
@@

- priv_check_cred(E1,E2,0)
+ priv_check_cred(E1,E2)

Sponsored by:	The FreeBSD Foundation
2018-12-11 19:32:16 +00:00
Andrey V. Elsukov
adc7bb2237 Add sadb_x_sa2 extension to SADB_ACQUIRE requests.
SADB_ACQUIRE requests are send by kernel, when security policy doesn't
have corresponding security association for outbound packet. IKE daemon
usually registers its handler for such messages and when the kernel asks
for SA it can handle this request. Now such requests will contain
additional fields that can help IKE daemon to create SA. And IKE now
can create SAs using only information from SADB_ACQUIRE request, this
is useful when many if_ipsec(4) interfaces are in use and IKE doesn track
security policies that was installed by kernel.

Obtained from:	Yandex LLC
MFC after:	3 weeks
Sponsored by:	Yandex LLC
2018-10-21 14:19:16 +00:00
Andrey V. Elsukov
0ddfd867ed Fix witness warning in xform_init().
Do not call crypto_newsession() while holding xforms_lock mutex.
Release mutex before invoking crypto_newsession(), and use
ipsec_kmod_enter()/ipsec_kmod_exit() functions to protect from doing
access to unloaded kernel module memory.

Move xform-releated functions into subr_ipsec.c to be able use
ipsec_kmod_* functions. Also unconditionally build ipsec_kmod_*
functions, since now they are always used by IPSec code.

Add xf_cntr field to struct xformsw, it is used by ipsec_kmod_*
functions. Also constify xf_name field, since it is not expected to be
modified.

Approved by:	re (kib)
Differential Revision:	https://reviews.freebsd.org/D17302
2018-09-26 14:47:51 +00:00
Andrew Turner
5f901c92a8 Use the new VNET_DEFINE_STATIC macro when we are defining static VNET
variables.

Reviewed by:	bz
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D16147
2018-07-24 16:35:52 +00:00
Conrad Meyer
1b0909d51a OpenCrypto: Convert sessions to opaque handles instead of integers
Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers.  Avoid redundancy and complexity in
individual drivers by allocating session memory in the framework and
providing it to drivers in ::newsession().

Session handles are no longer integers with information encoded in various
high bits.  Use of the CRYPTO_SESID2FOO() macros should be replaced with the
appropriate crypto_ses2foo() function on the opaque session handle.

Convert OCF drivers (in particular, cryptosoft, as well as myriad others) to
the opaque handle interface.  Discard existing session tracking as much as
possible (quick pass).  There may be additional code ripe for deletion.

Convert OCF consumers (ipsec, geom_eli, krb5, cryptodev) to handle-style
interface.  The conversion is largely mechnical.

The change is documented in crypto.9.

Inspired by
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .

No objection from:	ae (ipsec portion)
Reported by:	jhb
2018-07-18 00:56:25 +00:00
Conrad Meyer
2e08e39ff5 OCF: Add a typedef for session identifiers
No functional change.

This should ease the transition from an integer session identifier model to
an opaque pointer model.
2018-07-13 23:46:07 +00:00
Sean Bruno
968ac175e4 fix locking within tcp_ipsec_pcbctl() to match ipsec4_pcbctl(), ipsec4_pcbctl()
IPSEC_PCBCTL() functions, which include tcp_ipsec_pcbctl(),
ipsec4_pcbctl(), and ipsec6_pcbctl(), should all have matching locking
semantics.

ipsec4_pcbctl() and ipsec6_pcbctl() expect the inp to be unlocked on
entry and exit and appear to be correctly implemented as such. But
tcp_ipsec_pcbctl() had other semantics. This patch fixes the semantics
for tcp_ipsec_pcbctl().

Submitted by:	Jason Eggleston <jason@eggnet.com>
MFH:		2 weeks
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D14623
2018-07-04 17:10:07 +00:00
Ed Maste
5b2b45a421 r335795 build fix: make static functions static
-Werror,-Wmissing-prototypes makes this an error otherwise.

MFC with:	335795
Sponsored by:	The FreeBSD Foundation
2018-06-29 14:51:36 +00:00
Andrey V. Elsukov
52b3619f45 Make debug output produced by setkey -x command a more human readable.
Add text names of SADB message types and extension headers to the output.

Obtained from:	Yandex LLC
MFC after:	2 weeks
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D16036
2018-06-29 13:59:33 +00:00
Mateusz Guzik
4e180881ae uma: implement provisional api for per-cpu zones
Per-cpu zone allocations are very rarely done compared to regular zones.
The intent is to avoid pessimizing the latter case with per-cpu specific
code.

In particular contrary to the claim in r334824, M_ZERO is sometimes being
used for such zones. But the zeroing method is completely different and
braching on it in the fast path for regular zones is a waste of time.
2018-06-08 21:40:03 +00:00
Andrey V. Elsukov
6d8fdfa9d5 Rework IP encapsulation handling code.
Currently it has several disadvantages:
- it uses single mutex to protect internal structures. It is used by
  data- and control- path, thus there are no parallelism at all.
- it uses single list to keep encap handlers for both INET and INET6
  families.
- struct encaptab keeps unneeded information (src, dst, masks, protosw),
  that isn't used by code in the source tree.
- matches are prioritized and when many tunneling interfaces are
  registered, encapcheck handler of each interface is invoked for each
  packet. The search takes O(n) for n interfaces. All this work is done
  with exclusive lock held.

What this patch includes:
- the datapath is converted to be lockless using epoch(9) KPI.
- struct encaptab now linked using CK_LIST.
- all unused fields removed from struct encaptab. Several new fields
  addedr: min_length is the minimum packet length, that encapsulation
  handler expects to see; exact_match is maximum number of bits, that
  can return an encapsulation handler, when it wants to consume a packet.
- IPv6 and IPv4 handlers are stored in separate lists;
- added new "encap_lookup_t" method, that will be used later. It is
  targeted to speedup lookup of needed interface, when gif(4)/gre(4) have
  many interfaces.
- the need to use protosw structure is eliminated. The only pr_input
  method was used from this structure, so I don't see the need to keep
  using it.
- encap_input_t method changed to avoid using mbuf tags to store softc
  pointer. Now it is passed directly trough encap_input_t method.
  encap_getarg() funtions is removed.
- all sockaddr structures and code that uses them removed. We don't have
  any code in the tree that uses them. All consumers use encap_attach_func()
  method, that relies on invoking of encapcheck() to determine the needed
  handler.
- introduced struct encap_config, it contains parameters of encap handler
  that is going to be registered by encap_attach() function.
- encap handlers are stored in lists ordered by exact_match value, thus
  handlers that need more bits to match will be checked first, and if
  encapcheck method returns exact_match value, the search will be stopped.
- all current consumers changed to use new KPI.

Reviewed by:	mmacy
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
Conrad Meyer
ede2f7731d Correctly handle the padding for IPv6-AH, as specified by RFC4302
The RFC specifies that under IPv6 the complete AH header must be 64 bit
aligned, and under IPv4, 32 bit aligned. Prior to this change, we (along
with other BSDs and MacOS) had violated this requirement.

This makes it possible to set up IPv6-AH between Linux and BSD, and also
probably between Windows and BSD.

PR:		222684
Reported and tested by:	Jason Mader <jasonmader AT gmail.com>
Obtained from:	NetBSD xform_ah.c 1.105
		(b939fe2483972eb43d71bf990cfb7f26dece7839 NetBSD/src on GH)
		by Maxime Villard
MFC after:	35.2731 hours
Relnotes:	probably (breaks ipv6 compat with older FreeBSD/NetBSD/MacOS)
Sponsored by:	Dell EMC Isilon
2018-06-04 18:51:06 +00:00
Andrey V. Elsukov
33c1b2bd88 Temporary disable SPDCACHE statistic accounting until proper fix will be
committed. This fixes the kernel build without option IPSEC.
2018-05-28 09:23:28 +00:00
Matt Macy
c82dfce3ec netipsec/!VIMAGE: don't declare/define spdcache_destroy on non-VIMAGE builds
this breaks MIPS compiles in universe
2018-05-24 23:47:27 +00:00
Fabien Thomas
f8e73c47d8 Add a SPD cache to speed up lookups.
When large SPDs are used, we face two problems:

- too many CPU cycles are spent during the linear searches in the SPD
  for each packet
- too much contention on multi socket systems, since we use a single
  shared lock.

Main changes:

- added the sysctl tree 'net.key.spdcache' to control the SPD cache
  (disabled by default).
- cache the sp indexes that are used to perform SP lookups.
- use a range of dedicated mutexes to protect the cache lines.

Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae
Sponsored by:	Stormshield
Differential Revision: https://reviews.freebsd.org/D15050
2018-05-22 15:54:25 +00:00
Andrey V. Elsukov
bf18dfa28e Merge r1.22-1.23 from NetBSD:
Don't assume M_PKTHDR is set only on the first mbuf of the chain.
  The check is replaced by (m1 != m), which is equivalent to the previous
  code: we want to modify m->m_pkthdr.len only when 'm' was not passed in
  m_adj().

  Fix a pretty bad mistake, that has always been there:
   m_adj(m1, -(m1->m_len - roff));
   if (m1 != m)
	m->m_pkthdr.len -= (m1->m_len - roff);

  This is wrong: m_adj() will modify m1->m_len, so we're using a wrong
  value when manually adjusting m->m_pkthdr.len.

Reported by:	Maxime Villard <max at m00nbsd dot net>
Obtained from:	NetBSD
MFC after:	1 week
2018-04-26 12:23:31 +00:00
John Baldwin
fd40ecf3d4 Set the proper vnet in IPsec callback functions.
When using hardware crypto engines, the callback functions used to handle
an IPsec packet after it has been encrypted or decrypted can be invoked
asynchronously from a worker thread that is not associated with a vnet.
Extend 'struct xform_data' to include a vnet pointer and save the current
vnet in this new member when queueing crypto requests in IPsec.  In the
IPsec callback routines, use the new member to set the current vnet while
processing the modified packet.

This fixes a panic when using hardware offload such as ccr(4) with IPsec
after VIMAGE was enabled in GENERIC.

Reported by:	Sony Arpita Das and Harsh Jain @ Chelsio
Reviewed by:	bz
MFC after:	1 week
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D14763
2018-03-20 17:05:23 +00:00
Andrey V. Elsukov
017a5e581a Rework key_sendup_mbuf() a bit:
o count in_nomem counter when we have failed to allocate mbuf for
  promisc socket;
o count in_msgtarget counter when we have secussfully sent data to socket;
o Since we are sending messages in a loop, returning error on first fail
  interrupts the loop, and all remaining sockets will not receive this
  message. So, do not return error when we have failed to send data to ALL
  or REGISTERED target. Return error only for KEY_SENDUP_ONE case. Now,
  when some socket has overfilled its receive buffer, this will not break
  other sockets.

MFC after:	2 weeks
2018-03-11 19:14:01 +00:00
Andrey V. Elsukov
d158b221e5 Add KASSERT to check that proper targed was used.
MFC after:	2 weeks
2018-03-11 18:46:40 +00:00
Andrey V. Elsukov
e3004d2429 Replace panic() with KASSERTs.
MFC after:	2 weeks
2018-03-11 18:37:55 +00:00
Andrey V. Elsukov
dccd41cb39 Check that we have PF_KEY sockets before iterating over all RAW sockets.
MFC after:	2 weeks
2018-03-11 18:10:59 +00:00
Andrey V. Elsukov
26cb1e1dba Remove obsoleted and unused key_sendup() function.
Also remove declaration for nonexistend key_usrreq() function.

MFC after:	2 weeks
2018-03-11 18:03:55 +00:00
Andrey V. Elsukov
15bf717a93 Remove unused variables and sysctl declaration.
MFC after:	1 week
2018-02-19 12:20:51 +00:00