Commit Graph

38 Commits

Author SHA1 Message Date
Eric Joyner
71d104536b ice(4): Introduce new driver for Intel E800 Ethernet controllers
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.

These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.

For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.

A man page for this driver will be forthcoming.

MFC after:	1 month
Relnotes:	yes
Sponsored by:	Intel Corporation
Differential Revision:	https://reviews.freebsd.org/D21959
2020-05-26 23:35:10 +00:00
John Baldwin
713d00e7b6 Remove Doxyfile for sys/dev/ubsec since it has been removed. 2020-05-15 22:55:49 +00:00
Alexander Leidinger
95d32ad641 Remove deprecated options. 2020-03-26 09:23:16 +00:00
Alexander Leidinger
d65c432aa6 Fix duplicate target warning. 2020-02-11 19:39:59 +00:00
Alexander Leidinger
3df898baed remove the removed-from-source drm/drm2 parts 2019-03-05 15:23:28 +00:00
Alexander Leidinger
030a1f8ba2 Catch up with some years of driver development.
Most impressive in terms of doxygen stuff are the isci and
ocs_fc drivers.
2019-01-26 18:23:19 +00:00
Warner Losh
24b6d87155 Redo r339563: Remove joy(4) driver.
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
2018-10-26 16:03:30 +00:00
Warner Losh
7c320a22df Revert r339563.
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
2018-10-26 04:10:32 +00:00
Warner Losh
c1cdf6a42f Remove mse(4) from tree
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.

Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
2018-10-22 02:34:10 +00:00
Warner Losh
33a54d778b Remove joy(4) driver.
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
2018-10-22 02:34:00 +00:00
Warner Losh
592ffb2175 Revert drm2 removal.
Revert r338177, r338176, r338175, r338174, r338172

After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver.  Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.

It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).

Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.

Requested by: re@ (gjb, rgrimes)
2018-08-24 00:02:00 +00:00
Matt Macy
d494a4a745 r338172 followup - removal of stray drm references 2018-08-22 03:04:43 +00:00
Sean Bruno
6f78fad3b1 Retire vxge(4).
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.

Submitted by:	kbowling
Reviewed by:	brooks imp
Relnotes:	yes
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15442
2018-05-17 14:55:41 +00:00
Sean Bruno
57b4936514 nxge(4):
Remove nxge(4) and associated man page and tools in FreeBSD 12.0.

Submitted by:	kbowling
Reviewed by:	brooks
Relnotes:	yes
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D1529
2018-05-08 21:14:29 +00:00
Sean Bruno
2695c9c109 Retire ixgb(4)
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.

Submitted by:	kbowling
Reviewed by:	brooks imp jeffrey.e.pieper@intel.com
Relnotes:	yes
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15234
2018-05-02 15:59:15 +00:00
Ed Maste
e6a376d196 Retire lmc(4)
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license.  Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).

Reviewed by:	rgrimes
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D15245
2018-05-01 16:30:48 +00:00
Warner Losh
86d99b6884 Remove EISA bus support for add-in cards. Remove related kernel and
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.

Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.

Relnotes: yes
2017-02-16 21:57:35 +00:00
Warner Losh
5625fe9246 Remove Micro Channel Architecture support. Of the commonly available
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).

Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).

No Objection From: arch@
2017-02-15 23:04:25 +00:00
John Baldwin
09b9789b28 Remove the wl(4) driver and wlconfig(8) utility.
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b.  They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.

Relnotes:	yes
2016-08-19 22:27:14 +00:00
John Baldwin
64450fdf48 Remove the wds(4) driver for the WD700 ISA SCSI HBA.
While this driver does do DMA, it bounce buffers all transactions through
a single 64k buffer.  It also does not have a manpage.

Relnotes:	yes
2016-08-19 21:51:42 +00:00
John Baldwin
c1c9764296 Remove the si(4) driver and sicontrol(8) for Specialix serial cards.
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses.  This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual().  It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.

Relnotes:	yes
2016-08-19 21:14:27 +00:00
John Baldwin
61c38eefd3 Remove doxygen files for mcd(4) and scd(4) drivers.
Submitted by:	ak
2016-08-19 20:53:55 +00:00
Alexander Leidinger
176f88e9ac Quote variable for architectures where we have more than
one linuxulator (32/64bit) and as such may have a space
between both linuxulator locations.

Noticed by:	Miltiadis Margaronis <mmargaron@gmail.com>
Tested by:	Miltiadis Margaronis <mmargaron@gmail.com>
2016-04-16 20:41:13 +00:00
Christian Brueffer
9e934e2d88 Clean up more lindev(4) vestiges. 2014-05-02 11:09:01 +00:00
Eitan Adler
96240c89f0 Correct double "the the"
Approved by:	cperciva
MFC after:	3 days
2012-09-14 21:28:56 +00:00
Alexander Leidinger
9b3e7585a8 - remove non-existent input directories from the configs
- add the target-arch to the project name where applicable (arch dependend code)
- fix comment for __FreeBSD__ [1]

Noticed by:	bz	[1]
2012-02-01 10:59:19 +00:00
Alexander Leidinger
b5a02379fa Just define __FreeBSD__ to 1 instead of doing what the compiler does.
The kernel is supposed to DTRT based upon the __FreeBSD_version value,
not the value of __FreeBSD__.

Discussed with:	bz
2012-01-24 15:13:55 +00:00
Alexander Leidinger
02068a2420 We are in FreeBSD 10 now: define __FreeBSD__ to 10. 2012-01-24 11:06:22 +00:00
Alexander Leidinger
07c1584e76 Mechanically add a config for all missing drivers.
No cross-referencing was added to the configs, so no
automatic linking to the documentation of other subsystems.

Drivers which already contain doxygen markup:
agp ath bktr bxe cxgb cxgbe dpt drm e1000 iir
ixgbe mwl nxge ofw pccard siba wpi xen
2012-01-23 11:37:40 +00:00
Alexander Leidinger
20cb1f56a9 - Update config to doxygen 1.5.2 (I use this with 1.5.9).
- Add linprocfs and linsysfs to the linuxulator dox.
- Take the generated includes from the .m files from a subdirectory
  instead of putting everything into $(.OBJDIR). This imporves the
  human readbility of the source directory contents a lot, if you do not
  create a separate OBJDIR.
- Assume UTF-8 encoding for every input file.
- Strip the source and dest path from the output, we are not interested
  in the absolute location on the machine where the docs are created,
  relative the the root of the FreeBSD source is what interests us.
- Exclude .svn directories.
- Switch to alphabetic index.
- Use one line per INCLUDE_PATH member in the common dox-config.
- Bump the __FreeBSD__ version to 9.		[MFC: to 8]
- Switch from hardcoded .m files to an run-time generated one. Takes
  a little bit more time to get started with actual work, but at least
  is more future-proof. If you generate dox for all subsystems, the
  time to find all .m files in the source is magnitutes lower than
  producing the docs.
- Make the *DEST_PATH overidable from the environment. This allows to
  produce the output directly in the docroot of a webserver.
- Fix the path when telling the user where he can find the API docs.

MFC after:	1 month (after 8.0)
2009-08-24 13:10:55 +00:00
Bjoern A. Zeeb
2e598474fa Remove ISDN4BSD (I4B) from HEAD as it is not MPSAFE and
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.

This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation

Discussed with: rwatson, re
2008-05-26 10:40:09 +00:00
Xin LI
43d488c6d2 - Chase for crypto_if.m -> crytpodev_if.m rename in order to
fix doxygen generation.
 - Add some missing *_if.m files.

Approved by:	re (hrs)
2007-07-11 05:01:14 +00:00
Alexander Leidinger
dc03b7f41f ah_if.m was removed a while ago 2006-11-26 14:41:17 +00:00
Alexander Leidinger
69f1cb3c91 Fix build when .CURDIR != .OBJDIR.
Noticed by:	"Alexander Mogilny" <sg@astral.ntu-kpi.kiev.ua>
2006-08-02 15:24:59 +00:00
Alexander Leidinger
75f8db2658 Add (missing) and remove (obsolete) .m files. 2006-07-08 12:32:42 +00:00
Alexander Leidinger
39e2bd0bdb Add a disclaimer regarding public/internal functions to every subsystem for
now.

Discussed on:			cvs-all
Helped with the wording:	"Ben Kaduk" <minimarmot@gmail.com>
2006-05-28 15:25:18 +00:00
Alexander Leidinger
ff4b8cb7bd This is the kernel subsystem API documentation generation framework.
It uses doxygen to generate the API documentation. For each subsystem
a very small (about 20 lines with comments) subsystem specific Doxyfile
has to be written (have a look at the README for more). All common doxygen
options are specified in a separate file.

The framework is configured to not only generate the HTML version, but also
a PDF version (the paper size is hardcoded to DIN A4 currently and depending
on the subsystem you have to increase some limits in the latex configuration
of your system, the README tells more about this).

It also allows cross-references between the subsystems (it generates doxygen
tag files).

Currently the docs are generated in OBJDIR, but this may change after
coordination with doc@. The makefile is prepared to generate/move various
parts of the generated docs to different destinations.

TARGET_ARCH is respected and some env-vars are set for architecture specific
handling of the source (the README tells more).

Subsystems for which docs are generated:
 - cam                  - crypto                - dev_pci
 - dev_sound            - dev_usb               - geom
 - i4b                  - kern                  - libkern
 - linux                - net80211              - netgraph
 - netinet              - netinet6              - netipsec
 - opencrypto           - vm

Requested by:	gnn
2006-05-26 18:06:07 +00:00
Doug Rabson
a52b6f787c Experimental support for using doxygen to generate kernel documentation. 2004-07-11 16:13:57 +00:00