Commit Graph

699 Commits

Author SHA1 Message Date
Andrew Rybchenko
39e58a98ba sfxge(4): fix ID retrieval in v3 licensing
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18262
2018-11-30 07:06:13 +00:00
Andrew Rybchenko
b2053d8025 sfxge(4): add API to inform libefx of hardware removal
The efx_nic_hw_unavailable() checks ensure that if the NIC hardware
has failed or has been physically removed then libefx will stop
further attempts to access the hardware.

Add an interface for libefx clients to force unavailability, so the
hardware is treated as dead or removed even if still physically present.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18261
2018-11-30 07:06:01 +00:00
Andrew Rybchenko
c6d5e85dbe sfxge(4): add routine to check for hardware presence
Add efx_nic_hw_unavailable() routine to check for hardware presence
before continuing with NIC operations.

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18260
2018-11-30 07:05:49 +00:00
Andrew Rybchenko
315bbbaa7c sfxge(4): fix out of bounds read when dereferencing sdup
Introduce and use macro to make sure that MCDI buffers allocated
on stack are rounded up properly.

Submitted by:   Gautam Dawar <gdawar at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18259
2018-11-30 07:05:36 +00:00
Andrew Rybchenko
5037810f7e sfxge(4): add information if TSO workaround is required
In SF bug 61297 it's been confirmed that the hardware does not always
calculate the TCP checksum correctly with TSO sends.

The value of the Total Length field (IPv4) or Payload Length field
(IPv6) is the critical factor. We're sufficiently confident that if
these fields are zero then the checksum will be calculated correctly.

The information may be used by the drivers to check if the workaround is
required when FATSOv2 is implemented.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18258
2018-11-30 07:05:23 +00:00
Andrew Rybchenko
6b231fec92 sfxge(4): avoid usage of too big arrays on stack
Found by PreFAST static analysis.

Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18257
2018-11-30 07:05:12 +00:00
Andrew Rybchenko
e919b7ec20 sfxge(4): generalise EF10 NVRAM buffer interface
The SFN driver's PartitionControl WMI object requires an API to parse
and filter partition data in TLV format, particularly for the Dynamic
Config partition. The ef10_nvram_buffer functions provide this
functionality but are tied to use with license partition only.
Modify functions so they are applicable to all TLV partitions and add
functions to support in-place tag modification.

Submitted by:   Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18256
2018-11-30 07:05:00 +00:00
Andrew Rybchenko
cd5e337110 sfxge(4): add accessor for default port mode
Extend efx_mcdi_get_port_modes() to optionally pass on the default
port mode field. This provides a more direct way of handling the case
where the dynamic config does not specify the port mode than the
alternative of a lookup table indexed by MCFW subtype.

Submitted by:   Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18255
2018-11-30 07:04:48 +00:00
Andrew Rybchenko
d86bef48a5 sfxge(4): add buffer editing functions to boot config
Functions to process the DHCP option list format used by the expansion
ROM config buffers, to support extracting and updating of individual
options.
The initial use case is the driver presenting the global and per-PF
options as separate items, with the driver implementing the
synchronization of global options across the configuration buffers
for all PFs.

Submitted by:   Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18254
2018-11-30 07:04:37 +00:00
Andrew Rybchenko
b4d3f02ea2 sfxge(4): add API to retrieve sensor limits
Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18253
2018-11-30 07:04:25 +00:00
Andrew Rybchenko
9d3487a623 sfxge(4): check size of memory to read sensors data to
Size of provided memory should be consistent with specified size.

Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18252
2018-11-30 07:04:13 +00:00
Andrew Rybchenko
d515a203d8 sfxge(4): add generated description of sensors
Description of sensors is generated from firmware sources.

Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18251
2018-11-30 05:54:30 +00:00
Andrew Rybchenko
4c7d5ddbe4 sfxge(4): remove probes when a Tx queue is too full
No need for probe messages when a TxQ is too full for a post to be done.

Existing drivers check if there is room in the queue before posting
descriptors, even though efx_tx_qdesc_post() does the check itself.

The new SFN Windows driver doesn't perform the check before calling
efx_tx_qdesc_post(), but that means these probes can get frequently
printed out. It's normal driver behaviour so there's no need to print
an error.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18250
2018-11-30 05:54:19 +00:00
Andrew Rybchenko
21b72677d9 sfxge(4): refactor monitors support
Remove obsolete monitor types since Falcon SFN4000 series adapters
no longer supported by libefx.
Rename MCDI monitors to be consistent with YML.
The code may be simplified and generalized since only MCDI monitors
remain.

Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18249
2018-11-30 05:54:07 +00:00
Andrew Rybchenko
383a1cce7a sfxge(4): move empty efsys definitions to EFX headers
Move empty definitions for platform-specific annotations from efsys.h
to EFX headers.

Submitted by:   Martin Harvey <mharvey at solarflare.com>
Submitted by:   Andrew Lee <alee at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18248
2018-11-30 05:50:01 +00:00
Andrew Rybchenko
e9bc5a34f4 sfxge(4): add more definitions of partitions
Add definitions of dynamic config and expansion ROM backup
partitions.

Submitted by:   Paul Fox <pfox at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18247
2018-11-29 06:47:41 +00:00
Andrew Rybchenko
b288270efc sfxge(4): fix build because of no declaration
Functions declared in mcdi_mon.h are implemented in mcdi_mon.c.
The build fails if compiler options require declaration before definition.

Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18246
2018-11-29 06:47:30 +00:00
Andrew Rybchenko
dbcc3c8f70 sfxge(4): fix SAL annotation for input buffers
Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18245
2018-11-29 06:47:19 +00:00
Andrew Rybchenko
e4ddd4ccb3 sfxge(4): fix PreFAST warnings because of unused return
Submitted by:   Martin Harvey <mharvey at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18244
2018-11-29 06:47:06 +00:00
Andrew Rybchenko
aea9d093f2 sfxge(4): add Medford2 head-of-line blocking stats
These stats are availble on Medford2 DPDK firmware variant
which support equal stride super-buffer Rx mode. RXDP_HLB_IDLE
capability bit is set when the stats are available.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18243
2018-11-29 06:46:55 +00:00
Andrew Rybchenko
ef8967c7d2 sfxge(4): support RxDP scatter disabled truncate counter
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18242
2018-11-29 06:46:44 +00:00
Andrew Rybchenko
c27e7228d5 sfxge(4): generate Medford2 RxDP stats
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18241
2018-11-29 06:46:33 +00:00
Andrew Rybchenko
5c2f9d6a49 sfxge(4): get max supported value for action MARK
The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EINVAL. This patch allows the
driver to check the value at the filter validation.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18240
2018-11-29 06:46:21 +00:00
Andrew Rybchenko
fc9798c79a sfxge(4): support MARK and FLAG actions in filters
This patch adds support for DPDK rte_flow "MARK" and "FLAG" filter
actions to filters on EF10 family NICs.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18239
2018-11-29 06:46:10 +00:00
Andrew Rybchenko
6e1ebbe9e2 sfxge(4): get actions MARK and FLAG support
Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18238
2018-11-29 06:46:01 +00:00
Andrew Rybchenko
d222b61743 sfxge(4): add equal stride super-buffer prefix layout
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18237
2018-11-29 06:45:50 +00:00
Andrew Rybchenko
04381b5e29 sfxge(4): support equal stride super-buffer Rx mode
Equal stride super-buffer Rx mode is supported by DPDK firmware
variant. One Rx descriptor provides many Rx buffers to firmware.
Rx buffers follow each other with specified stride.
Also it supports head of line blocking with timeout to address
drops when no Rx descriptors are available. So it gives extra time
to the driver to provide Rx descriptors before drop.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18236
2018-11-29 06:45:38 +00:00
Andrew Rybchenko
ceeff9b1a1 sfxge(4): detect equal stride super-buffer support
Equal stride super-buffer Rx mode is supported on Medford2 by
DPDK firmware variant.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18235
2018-11-29 06:45:26 +00:00
Andrew Rybchenko
2a726a7f94 sfxge(4): make RxQ type data an union
The type is an internal interface. Single integer is insufficient
to carry RxQ type-specific information in the case of equal stride
super-buffer Rx mode (packet buffers per bucket, maximum DMA length,
packet stride, head of line block timeout).

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18234
2018-11-29 06:45:15 +00:00
Andrew Rybchenko
aed78107bb sfxge(4): update autogenerated MCDI and TLV headers
Equal stride super-buffer is a new name instead of deprecated equal
stride packed stream to avoid confusion with previous packed stream.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18233
2018-11-29 06:45:04 +00:00
Andrew Rybchenko
fcfb73b86d sfxge(4): honour packed stream RSS restriction
Packed stream firmware variant on EF10 adapters has a
number of properties which must be taken into account:

 - Only one exclusive RSS context is available per port.
 - Only IP addresses can contribute to the hash value.

Huntington and Medford have one more limitation which
is important for the drivers capable of packed stream:

 - Hash algorithm is non-standard (i.e. non-Toeplitz).
   This implies XORing together source + destination
   IP addresses (or last four bytes in the case of IPv6)
   and using the result as the input to a Toeplitz hash.

This patch provides a number of improvements in order
to treat the mentioned limitations in the common code.

If the firmware variant is packed stream, the list of
supported hash tuples will include less variants, and
the maximum number of RSS contexts will be set to one.

Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18232
2018-11-29 06:44:51 +00:00
Andrew Rybchenko
fd962dff89 sfxge(4): support more RSS hash configurations
Modern firmwares on EF10 adapters have support for
more traffic classes eligible for hash computation.
Also, it has become possible to adjust hashing per
individual class and select distinct packet fields
which will be able to contribute to the hash value.

This patch adds support for the mentioned features.

Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18231
2018-11-29 06:44:39 +00:00
Andrew Rybchenko
35ebf2a9f2 sfxge(4): add a new means to control RSS hash
Currently, libefx has no support for additional RSS modes
available with later controllers. In order to support this,
libefx should be able to list available hash configurations.

This patch provides basic infrastructure for the new interface.
The client drivers will be able to query the list of supported
hash configurations for a particular hash algorithm. Also, it
will be possible to configure hashing by means of new definitions.

Submitted by:   Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18230
2018-11-29 06:44:28 +00:00
Andrew Rybchenko
ce6c2c8ffb sfxge(4): cope with clang warning on negative shift
clang 4.0.1-6 on Ubuntu generates false positive warning that shift
is negative.  It is done regardless of the fact that the branch is
not taken because of previous check.

The warning is generate in EFX_INSERT_NATIVE32 used by
EFX_INSERT_FIELD_NATIVE32. All similar cases are fixed as well.

It is undesirable to suppress the warning completely.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18229
2018-11-29 06:44:20 +00:00
Andrew Rybchenko
2a67ba3018 sfxge(4): fix comparison always true warning
Loopback type used as bit index has efx_loopback_type_t type
which is enum. clang complains that it is always true when it
is compared with qword (64 bit) bits number boundary.

Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D18228
2018-11-29 06:44:09 +00:00
Andrew Rybchenko
17bcc05631 sfxge(4): support FW subvariant choice
If DPDK application or OS does not need checksumming on transmit,
it may be disabled in firmware to achieve higher packet rates.
Choice must be done before VIS allocation and is allowed if
no other non-preboot and firmware subvariant-unaware drivers are
attached.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18227
2018-11-29 06:43:57 +00:00
Andrew Rybchenko
3f8f54956a sfxge(4): report no Tx checksum FW subvariant support
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18226
2018-11-29 06:43:46 +00:00
Andrew Rybchenko
e0b3c2cc1a sfxge(4): add firmware subvariant aware driver option
FW subvariants allow to tweak NIC global features. For example,
if no drivers require checksumming on transmit, it may be disabled
in FW to increase packet rate.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18225
2018-11-29 06:43:34 +00:00
Andrew Rybchenko
6da6b6c758 sfxge(4): update MCDI headers
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18224
2018-11-29 06:43:23 +00:00
Andrew Rybchenko
d5dbb451b6 sfxge(4): add values for RxDPCPU firmware id recognition
Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18223
2018-11-29 06:43:12 +00:00
Andrew Rybchenko
87a67e180f sfxge(4): support choosing firmware variant
Submitted by:   Gautam Dawar <gdawar at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18222
2018-11-29 06:43:00 +00:00
Andrew Rybchenko
2d2d812352 sfxge(4): support drop filters on EF10 family NICs
Add support for filters which drop packets when forming MCDI request
for a filter.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18221
2018-11-29 06:42:49 +00:00
Andrew Rybchenko
9d5aae2705 sfxge(4): distinguish filters for encapsulated packets
Add filter match flag to distinguish filters applied only to
encapsulated packets.

Match flags set should allow to determine whether a filter
is supported or not. The problem is that if specification
has supported set outer match flags and specified
encapsulation without any inner flags, check says that it
is supported, and filter insertion is performed. However,
there is no filtering of the encapsulated traffic. A new
flag is added to solve this problem and separate the
filters for the encapsulated packets.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18220
2018-11-29 06:42:38 +00:00
Andrew Rybchenko
aab1bcb438 sfxge(4): support VXLAN filter creation
Submitted by:   Vijay Srivastava <vijays at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18219
2018-11-29 06:42:26 +00:00
Andrew Rybchenko
de7acb0847 sfxge(4): support VNI/VSID and inner frame local MAC
This supports VNI/VSID and inner frame local MAC fields to
match in VXLAN, GENEVE, or NVGRE packets.

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18218
2018-11-29 06:42:15 +00:00
Andrew Rybchenko
13c11cb7aa sfxge(4): support filters for encapsulated packets
This adds filters for encapsulated packets to the list
returned by ef10_filter_supported_filters().

Submitted by:   Roman Zhukov <roman.zhukov at oktetlabs.ru>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18217
2018-11-29 06:42:04 +00:00
Andrew Rybchenko
80c4ed9696 sfxge(4): sync MCDI headers and TLV layout
Regenerate MCDI and TLV layout headers from firmwaresrc to
pick up DPDK firmware variant and related Rx queue and filtering
extensions.

Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18216
2018-11-29 06:41:53 +00:00
Andrew Rybchenko
02d7c0c395 sfxge(4): add signed image layout support
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18215
2018-11-29 06:41:41 +00:00
Andrew Rybchenko
391763d7b4 sfxge(4): add firmware image layout option
Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18214
2018-11-29 06:29:24 +00:00
Andrew Rybchenko
4142e8cfbb sfxge(4): add outer IP ID parameter to TSOv2 descriptor
Set outer_ip_id in the TX option descriptor for encapsulated packets.

Submitted by:   Vijay Srivastava <vijays at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
Differential Revision:  https://reviews.freebsd.org/D18213
2018-11-28 09:25:43 +00:00