Commit Graph

51 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
b5961be1ab Add GEOM attribute to report physical device name, and report it
via 'diskinfo -v'.  This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM.  And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.

Reviewed by:	allanjude, imp
Sponsored by:	Klara Inc
Differential Revision:	https://reviews.freebsd.org/D22249
2019-11-09 17:30:19 +00:00
Warner Losh
1723a6e523 Sanity check media size and sector counts to ensure that we don't
produce negative sector numbers in the testing algorithm.

CID: 1198994
2018-01-06 12:34:03 +00:00
Alan Somers
18e980c0e0 diskinfo(8): Delete dead code in slog test
Reported by:	Coverity
CID:		1377556
Reviewed by:	mav
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D13275
2017-11-27 21:10:50 +00:00
Alexander Motin
31c6d7311e Fix integer overflow in SLOG test.
MFC after:	1 week
2017-11-27 20:01:43 +00:00
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Bryan Drewery
ea825d0274 DIRDEPS_BUILD: Update dependencies.
Sponsored by:	Dell EMC Isilon
2017-10-31 00:07:04 +00:00
Alan Somers
27f0f2ec5f Display rotation rate and TRIM/UNMAP support in diskinfo(8)
Bump __FreeBSD_version due to the expansion of struct diocgattr_arg.

Reviewed by:	mav, allanjude, imp
MFC after:	3 weeks
Relnotes:	yes
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D12578
2017-10-04 15:09:49 +00:00
Alan Somers
780dc32b31 Fix copy/paste error in diskinfo.8 from r320555
MFC after:	1 week
Sponsored by:	Spectra Logic Corp
2017-10-03 17:00:01 +00:00
Alexander Motin
e975a1aba0 Align test I/O buffer to page boundary.
This is more alike to typical kernel behavior, that can be useful from
benchmarking point of view.

MFC after:	1 week
2017-10-01 16:59:02 +00:00
Alexander Motin
75b2ed47b7 Alike to ZFS disable cache flush after first ENOTSUP error.
MFC after:	1 week
2017-09-28 15:58:41 +00:00
Alexander Motin
321728cef1 Report device descr in addition to ident.
Serial number without device model is somewhat less useful.

MFC after:	2 weeks
2017-07-06 09:05:38 +00:00
Alexander Motin
1a01f934bf Add naive benchmark for SSDs in ZFS SLOG role.
ZFS SLOGs have very specific access pattern with many cache flushes,
which none of benchmarks I know can simulate.  Since SSD vendors rarely
specify cache flush time, this measurement can be useful to explain why
some ZFS pools are slower then expected.  This test writes data chunks
of different size followed by cache flush, alike to what ZFS SLOG does,
and measures average time.

To illustrate, here is result for 6 years old SATA Intel 710 Series SSD:

Synchronous random writes:
         0.5 kbytes:    138.3 usec/IO =      3.5 Mbytes/s
           1 kbytes:    137.7 usec/IO =      7.1 Mbytes/s
           2 kbytes:    151.1 usec/IO =     12.9 Mbytes/s
           4 kbytes:    158.2 usec/IO =     24.7 Mbytes/s
           8 kbytes:    175.6 usec/IO =     44.5 Mbytes/s
          16 kbytes:    210.1 usec/IO =     74.4 Mbytes/s
          32 kbytes:    274.2 usec/IO =    114.0 Mbytes/s
          64 kbytes:    416.5 usec/IO =    150.1 Mbytes/s
         128 kbytes:    776.6 usec/IO =    161.0 Mbytes/s
         256 kbytes:   1503.1 usec/IO =    166.3 Mbytes/s
         512 kbytes:   2968.7 usec/IO =    168.4 Mbytes/s
        1024 kbytes:   5866.8 usec/IO =    170.5 Mbytes/s
        2048 kbytes:  11696.6 usec/IO =    171.0 Mbytes/s
        4096 kbytes:  23329.6 usec/IO =    171.5 Mbytes/s
        8192 kbytes:  46779.5 usec/IO =    171.0 Mbytes/s

, and much newer and supposedly much faster NVMe Samsung 950 PRO SSD:

Synchronous random writes:
         0.5 kbytes:   2092.9 usec/IO =      0.2 Mbytes/s
           1 kbytes:   2013.1 usec/IO =      0.5 Mbytes/s
           2 kbytes:   2014.8 usec/IO =      1.0 Mbytes/s
           4 kbytes:   2090.7 usec/IO =      1.9 Mbytes/s
           8 kbytes:   2044.5 usec/IO =      3.8 Mbytes/s
          16 kbytes:   2084.8 usec/IO =      7.5 Mbytes/s
          32 kbytes:   2137.1 usec/IO =     14.6 Mbytes/s
          64 kbytes:   2173.4 usec/IO =     28.8 Mbytes/s
         128 kbytes:   2923.9 usec/IO =     42.8 Mbytes/s
         256 kbytes:   3085.3 usec/IO =     81.0 Mbytes/s
         512 kbytes:   3112.2 usec/IO =    160.7 Mbytes/s
        1024 kbytes:   2430.6 usec/IO =    411.4 Mbytes/s
        2048 kbytes:   3788.9 usec/IO =    527.9 Mbytes/s
        4096 kbytes:   6198.0 usec/IO =    645.4 Mbytes/s
        8192 kbytes:  10764.9 usec/IO =    743.2 Mbytes/s

While the first one obviously has maximal throughput limitations, the
second one has so high cache flush latency (about 2 millisecond), that
it makes one almost useless in SLOG role, despite of its good throughput
numbers.  Power loss protection is out of scope of this test, but I
suspect it can be related.

MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2017-07-05 16:20:22 +00:00
Allan Jude
875a1f776c diskinfo(8): correct typo in man page
Reported by:	N.J. Mann <njm@njm.me.uk>
2017-07-02 16:20:49 +00:00
Allan Jude
278a04f5c8 Add -s (serial) and -p (physpath) to diskinfo
Return the bare requested information, intended for scripting.

The serial number of a SAS/SCSI device can be returned with
'camcontrol inquiry disk -S', but there is no similar switch for SATA.

This provides a way to get this information from both SAS and SATA disks

the -s and -p flags are mutually exclusive, and cannot be used with any
other flags.

Reviewed by:	rpokala, wblock
MFC after:	1 month
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D7828
2017-07-01 21:34:57 +00:00
Alan Somers
4c9f98e28a Quell Coverity for diskinfo(8)
* CID 1198994: Don't run the speed disk on a disk with no sectors
* CID 1011442: Don't call close(2) if open(2) fails
* CID 1011161: Use snprintf instead of sprintf
* CID 1009825: Check the return value of lseek

Reported by:	Coverity
CID:		1198994 1011442 1011161 1009825
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
2017-01-04 00:39:06 +00:00
Edward Tomasz Napierala
af375c284d Small tweaks to the diskinfo(8) manual page, to make it more consistent
with others.

MFC after:	1 month
2016-09-22 07:55:07 +00:00
Edward Tomasz Napierala
b76ce4527b Add "diskinfo -i", a simple aio-based IOPS benchmark.
MFC after:	1 month
2016-09-22 07:33:43 +00:00
Edward Tomasz Napierala
f289d2a5ae Reduce code duplication by factoring out the delta_t() function.
No functional changes.

MFC after:	1 month
2016-09-21 18:07:25 +00:00
Edward Tomasz Napierala
6307380ad1 Cosmetics - add missing newline.
MFC after:	1 month
2016-09-21 11:27:56 +00:00
Edward Tomasz Napierala
5ac5a2b265 Make it possible for diskinfo(8) to operate on files. This is useful
with -t and upcoming -i.

MFC after:	1 month
2016-09-21 11:17:58 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
44d314f704 dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Baptiste Daroussin
c6db8143ed Convert usr.sbin to LIBADD
Reduce overlinking
2014-11-25 16:57:27 +00:00
Simon J. Gerraty
fae50821ae Updated dependencies 2014-05-16 14:09:51 +00:00
Simon J. Gerraty
76b28ad6ab Updated dependencies 2014-05-10 05:16:28 +00:00
Simon J. Gerraty
7cf3a1c6b2 Updated dependencies 2013-03-11 17:21:52 +00:00
Simon J. Gerraty
f5f7c05209 Updated dependencies 2013-02-16 01:23:54 +00:00
Simon J. Gerraty
23090366f7 Sync from head 2012-11-04 02:52:03 +00:00
Eitan Adler
db702c59cf remove duplicate semicolons where possible.
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:00:37 +00:00
Marcel Moolenaar
7750ad47a9 Sync FreeBSD's bmake branch with Juniper's internal bmake branch.
Requested by: Simon Gerraty <sjg@juniper.net>
2012-08-22 19:25:57 +00:00
Edward Tomasz Napierala
6b381ff332 Improve error reporting in diskinfo(8) by not displaying errno when
it doesn't make sense.
2012-03-09 18:34:14 +00:00
Alexander Motin
23454425b7 Fix diskinfo -t operation for disks smaller then 8GB or bigger then 2TB.
Tested to work with 1.44MB floppy, 4GB USB stick and 4TB disk array.

Approved by:	re (kib)
2011-07-21 19:39:40 +00:00
Justin T. Gibbs
416494d7c9 Plumb device physical path reporting from CAM devices, through GEOM and
DEVFS, and make it accessible via the diskinfo utility.

Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Allow disk providers to implement a new method which can override
	  the default BIO_GETATTR response, d_getattr(struct bio *).  This
	  function returns -1 if not handled, otherwise it returns 0 or an
	  errno to be passed to g_io_deliver().

sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
	  is now responsible for returning this information via
	  d_getattr()->(a)dagetattr()->xpt_getatr().

sys/geom/geom_dev.c:
	- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
	  attribute "GEOM::physpath", if possible.  If the attribute request
	  returns a zero-length string, ENOENT is returned.

usr.sbin/diskinfo/diskinfo.c:
	- If the DIOCGPHYSPATH ioctl is successful, report physical path
	  data when diskinfo is executed with the '-v' option.

Submitted by:	will
Reviewed by:	gibbs
Sponsored by:	Spectra Logic Corporation

Add generic attribute change notification support to GEOM.

sys/sys/geom/geom.h:
	Add a new attrchanged method field to both g_class
	and g_geom.

sys/sys/geom/geom.h:
sys/geom/geom_event.c:
	- Provide the g_attr_changed() function that providers
	  can use to advertise attribute changes.
	- Perform delivery of attribute change notifications
	  from a thread context via the standard GEOM event
	  mechanism.

sys/geom/geom_subr.c:
	Inherit the attrchanged method from class to geom (class instance).

sys/geom/geom_disk.c:
	Provide disk_attr_changed() to provide g_attr_changed() access
	to consumers of the disk API.

sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
	Use attribute changed events to track updates to physical path
	information.

sys/cam/scsi/scsi_da.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, and
	the updated buffer type references our physical path
	attribute, emit a GEOM attribute changed event via the
	disk_attr_changed() API.

sys/cam/scsi/scsi_pass.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, update
	the physical patch devfs alias for this pass instance.

Submitted by:	gibbs
Sponsored by:	Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
Xin LI
f5d62d03ad Don't consider ioctl returning error as a fatal error and move on to next
disk.  When multiple devices are specified, a non-supporting ioctl will
cause diskinfo(8) to stop at the point which does not seem to be necessary.

Ok'ed by:	phk
MFC after:	1 month
2011-02-08 11:32:22 +00:00
Ed Schouten
71ccf09269 The last big commit: let usr.sbin/ use WARNS=6 by default. 2010-01-02 11:07:44 +00:00
Alexander Motin
851b967a27 Make diskinfo report disk stripe size and offset. It should help users to
make file systems optimally aligned and tuned for better performance.
2009-12-24 21:39:30 +00:00
Pawel Jakub Dawidek
18e5fe2840 Don't bother obtaining the ident if we are not going to print it. 2009-09-03 22:19:09 +00:00
Pawel Jakub Dawidek
c5791aae52 Print provider's ident when in verbose mode. 2007-05-06 00:25:21 +00:00
Ruslan Ermilov
59a3c79da6 Sort sections. 2005-01-18 20:02:45 +00:00
Ruslan Ermilov
9046f8cd17 Add -c to SYNOPSIS and usage(). 2005-01-11 10:53:09 +00:00
Søren Schmidt
6a33b3c60b Add -c option that calculates the overhead of read I/O ops. 2004-11-09 12:28:41 +00:00
Pawel Jakub Dawidek
8a4979c259 Actually negative size is possible for file system, but not for disk. 2004-05-25 12:11:13 +00:00
Pawel Jakub Dawidek
991d64ece8 In verbose mode print disk sizes in human readable form as well.
OK'ed by:	phk
2004-05-24 22:52:32 +00:00
Poul-Henning Kamp
cbf67506f6 Make WARNS=5 clean.
Prodded by:	Stefan Farfeleder <stefan@fafoe.narf.at>
2004-04-05 08:15:04 +00:00
Ruslan Ermilov
9137d52af5 Sync manpage's synopsis with usage(). 2004-03-30 07:37:04 +00:00
Ruslan Ermilov
a388918d35 Assorted mdoc(7) fixes. 2003-05-31 18:07:09 +00:00
Gordon Tetlow
a885db9a13 Correct a type in the bugs section. Also turn it into a list.
Approved by:	re(murray)
2003-05-11 22:22:10 +00:00
Poul-Henning Kamp
b8c2d40de1 I forgot a rather crucial cast when I made this sectorsize agnostic.
Tune iteration counts a bit.
2003-04-09 14:25:04 +00:00