Commit Graph

58 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
aa21218504 Minor tweaks to iscsi(4) and iscsid(8).
MFC after:	2 weeks
2017-05-28 17:02:29 +00:00
Marcelo Araujo
56eeadd845 Use nitems() from sys/param.h.
MFC after:	3 weeks.
2017-03-11 04:03:13 +00:00
Enji Cooper
64a0982bee usr.sbin: normalize paths using SRCTOP-relative paths or :H when possible
This simplifies make logic/output

MFC after:	1 month
Sponsored by:	Dell EMC Isilon
2017-03-04 11:38:03 +00:00
Alexander Motin
625571de20 Remove ISCSI_MAX_DATA_SEGMENT_LENGTH, using negotiated value.
MFC after:	2 weeks
2017-01-20 17:14:10 +00:00
Alexander Motin
a15fbc904a Alike to r312190 decouple iSCSI connection limits from defaults.
Connection parameters should remain at defaults until negotiated.

While there, remove sythetic limits, applied if kernel provided none.
iscsid has no own limitations, no configuration and no any idea what
values are good.  Assume kernel knows what it requests.
2017-01-14 20:41:44 +00:00
Navdeep Parhar
97b84d344d Make the iSCSI parameter negotiation more flexible.
Decouple the send and receive limits on the amount of data in a single
iSCSI PDU.  MaxRecvDataSegmentLength is declarative, not negotiated, and
is direction-specific so there is no reason for both ends to limit
themselves to the same min(initiator, target) value in both directions.

Allow iSCSI drivers to report their send, receive, first burst, and max
burst limits explicitly instead of using hardcoded values or trying to
derive all of them from the receive limit (which was the only limit
reported by the drivers prior to this change).

Display the send and receive limits separately in the userspace iSCSI
utilities.

Reviewed by:	jpaetzel@ (earlier version), trasz@
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D7279
2016-08-25 05:22:53 +00:00
Marcelo Araujo
f3ccb446d2 Fix calloc(3) argument order.
Reviewed by:	trasz
MFC after:	4 weeks.
Differential Revision:	https://reviews.freebsd.org/D7532
2016-08-22 15:01:39 +00:00
Edward Tomasz Napierala
03b521d4dc Decouple MaxBurstLength and FirstBurstLength from MaxRecvDataSegmentLength
reported by the ICL module in iscsid(8).  This harmed performance and was
just wrong.

MFC after:	1 month
2016-06-09 07:49:20 +00:00
Edward Tomasz Napierala
a863d33413 Build iscsid(8) with ICL_KERNEL_PROXY defined by default, as required
for iSER.

Obtained from:	Mellanox Technologies
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-23 12:58:24 +00:00
Edward Tomasz Napierala
b7af91d012 When iscsid(8) is running in ICL proxy mode, don't try to send Logout PDUs.
The kernel already does this for us when we ask it to terminate the session.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-19 14:59:21 +00:00
Edward Tomasz Napierala
5abae79af4 Add initial support for negotiating iSER parameters to iscsid(8). Some
rework might be needed to support asymetrical limits, but this should be
ok for now.

Obtained from:	Mellanox Technologies (earlier version)
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-05-17 07:54:53 +00:00
Glen Barber
d60840138f MFH
Sponsored by:	The FreeBSD Foundation
2016-04-04 23:55:32 +00:00
Edward Tomasz Napierala
535bd9beaf Make fail() preserve the errno.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-03-15 11:10:08 +00:00
Edward Tomasz Napierala
e19462c33b Use the log_errno value passed to the function instead of the errno global
variable.

Suggested by:	Daniel Braniss
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-03-15 11:03:45 +00:00
Glen Barber
7de1daeb93 Create packages for atm, ccdconfig, devd, ipf, ipfw,
iscsi, natd, nandfs, pf, quotacheck, and routed.

Add ping6 and rtsol to the runtime package.

Sponsored by:	The FreeBSD Foundation
2016-02-09 19:30:31 +00:00
Edward Tomasz Napierala
7aebc1bce2 Improve reporting of connection problems in iscsid(8).
Obtained from:	Mellanox Technologies
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-01-27 18:12:42 +00:00
Edward Tomasz Napierala
592d6e850a The <libutil.h> is an ordinary header file; should sort just like any other.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2016-01-24 18:11:36 +00:00
Bryan Drewery
b1f92fa229 META MODE: Update dependencies with 'the-lot' and add missing directories.
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so.  A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR.  These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package.  The current implementation of targets/ is
very unmaintainable.

Currently rescue/rescue and sys/modules are still not connected.

Sponsored by:	EMC / Isilon Storage Division
2015-12-01 05:23:19 +00:00
Edward Tomasz Napierala
f015623182 Remove unneeded includes.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-11-14 16:12:56 +00:00
Xin LI
61fa58e525 Remove a few unused headers.
MFC after:	2 weeks
2015-10-06 22:45:23 +00:00
Edward Tomasz Napierala
23bd2dd4a4 Use proper term in the ctld(8) and iscsid(8) man pages.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-09-03 11:43:56 +00:00
Edward Tomasz Napierala
424a3f57a2 Remove OpenSSL dependency from iscsid(8) and ctld(8).
Differential Revision:	https://reviews.freebsd.org/D2866
Submitted by:	Tony Morlan <tony at scroner.com> (earlier version)
Reviewed by:	bapt@, delphij@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-07-03 10:08:10 +00:00
Edward Tomasz Napierala
c700f14ce5 Remove unused code.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-12 11:57:31 +00:00
Edward Tomasz Napierala
83f375616e The connection_new() routine was taking an absurd number of parameters; fix it.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-05 07:32:24 +00:00
Edward Tomasz Napierala
82babffba9 Make it possible to set (via iscsi.conf(5)) and query (via iscsictl -v)
initiator iSCSI offload.  Pass maximum data segment size supported by
chosen offload module to iscsid(8), and make iscsid(8) not try to negotiate
anything larger than that.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-02-05 06:37:59 +00:00
Alexander Motin
3f9e1172b7 Slightly polish iSCSI parameters negotiation.
MFC after:	1 week
2014-12-19 01:12:22 +00:00
Alexander Motin
2124e3b07f Make sequence numbers checks more strict.
While we don't support MCS, hole in received sequence numbers may mean
only PDU loss.  While we don't support lost PDU recovery, terminate the
connection to avoid stuck commands.

While there, improve handling of sequence numbers wrap after 2^32 PDUs.

MFC after:	2 weeks
2014-12-17 15:13:21 +00:00
Baptiste Daroussin
c6db8143ed Convert usr.sbin to LIBADD
Reduce overlinking
2014-11-25 16:57:27 +00:00
Alexander Motin
8b94b5836c For both iSCSI initiator and target increase socket buffer sizes before
establishing connection.

This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.

MFC after:	1 week
2014-11-22 15:09:18 +00:00
Alexander Motin
40259c79cd Make both iSCSI initiator and target support base64 encoded CHAP data.
While all tested initiators and targets use hex-encoded CHAP data, RFC also
allows base64 encoding there, and Microsoft certificaition tool uses it.

Reviewed by:	trasz (earlier version)
MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2014-11-09 20:39:08 +00:00
Baptiste Daroussin
160c039d4e iscsid does not need to link to libssl 2014-11-06 10:30:10 +00:00
Edward Tomasz Napierala
2bd282696a Whitespace fixes.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2014-10-22 09:17:17 +00:00
Edward Tomasz Napierala
45078155e3 Untangle iSCSI authentication code by splitting off the CHAP
implementation.

Reviewed by:	mav@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2014-10-22 08:59:23 +00:00
Allan Jude
4f9ec02771 Add the new iscsi(4) man page
Cross reference it from iscsid(8) and iscsictl(8)

Reviewed by:	trasz
Approved by:	bcr (mentor), wblock (mentor)
Sponsored by:	ScaleEngine Inc.
CR:		https://reviews.freebsd.org/D741
2014-09-13 18:40:12 +00:00
Edward Tomasz Napierala
0686a20b8a Don't blindly assume the target agreed to transition to Full Feature Phase;
if we got a Login Response PDU without the "T" bit set, try again with
an empty request.  This fixes interoperability with COMSTAR.

Reviewed by:	mav@
Tested by:	mav@
MFC after:	1 week
2014-09-11 20:01:57 +00:00
Alexander Motin
eb4e5b0ad5 Fix memory leak, reported by Coverity.
CID:		1229996
2014-09-10 08:06:31 +00:00
Edward Tomasz Napierala
b7a65e3936 Make the iSCSI stack use __FBSDID() properly.
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-08-21 15:32:38 +00:00
Enji Cooper
a725bfc49c Add LIBCRYPTO and LIBSSL to DPADD
This fixes "make checkdpadd"

Phabric: D621
PR: 192761
Approved by: rpaulo (mentor)
MFC after: 2 weeks
2014-08-18 18:01:18 +00:00
Alexander Motin
ffe82e05b3 Make iSCSI initiator keep Initiator Session ID (ISID) across reconnects.
Previously ISID was changed every time, that made impossible correct
persistent reservation, because reconnected session was identified as
completely new one.

Reviewed by:	trasz
MFC after:	1 week
2014-07-06 17:37:49 +00:00
Baptiste Daroussin
01c2b8ac0d use .Mt to mark up email addresses consistently (part2)
PR:		191174
Submitted by:	Franco Fichtner  <franco@lastsummer.de>
2014-06-20 09:57:27 +00:00
Edward Tomasz Napierala
51be90b522 Implement redirection handling in initiator.
Sponsored by:	The FreeBSD Foundation
2014-06-18 17:35:40 +00:00
Edward Tomasz Napierala
09bf9ac9f2 Get rid of unneccessary argument.
Sponsored by:	The FreeBSD Foundation
2014-06-18 17:21:38 +00:00
Edward Tomasz Napierala
f704805957 Improve code a little; no functional changes.
Sponsored by:	The FreeBSD Foundation
2014-06-18 17:04:25 +00:00
Edward Tomasz Napierala
bbd91c8883 Use proper term in debug messages.
MFC after:	1 month
Sponsored by:	FreeBSD Foundation
2014-06-18 17:00:41 +00:00
Edward Tomasz Napierala
f851961034 Remove unused variable. 2014-05-15 18:34:31 +00:00
Edward Tomasz Napierala
280c1e94b4 Remove redundant code.
Sponsored by:	The FreeBSD Foundation
2014-04-17 12:53:56 +00:00
Edward Tomasz Napierala
57a4f20b8d Make it possible for the initiator side to operate in both proxy
and normal mode; this makes it possible to compile with the former
by default, but use it only when neccessary.  That's especially
important for the userland part.

Sponsored by:	The FreeBSD Foundation
2014-04-16 18:23:36 +00:00
Robert Watson
b881b8be1d Update most userspace consumers of capability.h to use capsicum.h instead.
auditdistd is not updated as I will make the change upstream and then do a
vendor import sometime in the next week or two.

MFC after:	3 weeks
2014-03-16 11:04:44 +00:00
Edward Tomasz Napierala
1ecb3c5857 So, it turns out SIGCHLD is discarded by default, so we have to set up
a dummy handler to make it interrupt an ioctl(2) or select(2).

This makes those short-lived iscsid(8) zombies disappear.

Sponsored by:	The FreeBSD Foundation
2014-02-11 10:47:28 +00:00
Edward Tomasz Napierala
022b237d47 Empty data segment during Login Phase is rather unlikely, but it's not
a protocol error.

Sponsored by:	The FreeBSD Foundation
2014-02-11 10:45:20 +00:00