Commit Graph

3998 Commits

Author SHA1 Message Date
Jordan K. Hubbard
a2e3ae34eb Document dhcp flags.
Submitted by:	"Sean O'Connell" <sean@stat.Duke.EDU>
1999-07-16 09:22:01 +00:00
Nik Clayton
5bf6ab8369 Add $Id$, to make it simpler for members of the translation teams to
track.

The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

     .\"    $Id$
     .\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by:            bde
1999-07-12 21:02:10 +00:00
Nik Clayton
fbc400a67a Add $Id$, to make it simpler for members of the translation teams to
track.

The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

     .\"    $Id$
     .\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by:            bde
1999-07-12 20:50:10 +00:00
Mike Pritchard
d95d7c87bf Use .Xr to xref pccardd(8). 1999-07-12 19:24:53 +00:00
Nick Hibma
0152aa09ae Correct typo
PR:		9638
Submitted by:	Mauro Allegrini <allegrini@usa.net>
1999-07-12 15:56:32 +00:00
David E. O'Brien
ac8011f83a Add portlint(1) and sort "SEE ALSO"'s. 1999-07-12 07:49:28 +00:00
Tim Vanderhoek
6b4c07361e - FreeBSD.ORG => FreeBSD.org
- Don't discourage people from using "make readmes"

 - Document WRKDIRPREFIX.
1999-07-12 02:33:47 +00:00
Bill Paul
3ebb090530 This commit adds driver support for the SysKonnect SK-984x series
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.

The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)

Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).

There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.

A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00
Jordan K. Hubbard
bd17e46e55 Properly document /etc/defaults/rc.conf and rc_conf_files.
Submitted by:		Sheldon Hearn <sheldonh@uunet.co.za>
1999-07-09 01:47:00 +00:00
Kazutaka YOKOTA
da905eaaec - Fix Belgian keyboard map (be.iso.kbd).
- Add Belgian keyboard map with dead keys (be.iso.acc.kbd).

Tested and corrections submitted by: "Renaud Fivet" <rfi@ntc.be>
1999-07-07 13:20:12 +00:00
Tatsumi Hosokawa
07c50a3b6b Added pccard_conf parameter. 1999-07-07 02:01:57 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Kazutaka YOKOTA
e92d69c442 List avaiable function keys. 1999-07-06 13:13:47 +00:00
Tatsumi Hosokawa
12061cb940 Added $pccardd_flags. 1999-07-06 12:17:59 +00:00
Nik Clayton
f591fcd118 Clarify static_routes variable's meaning
PR:             docs/12302
Submitted by:   Don Croyle <croyle@gelemna.ft-wayne.in.us>
Reviewed by:    nik
1999-07-05 23:05:25 +00:00
Kazutaka YOKOTA
5e09bef3bf Reflect recent changes in syscons and vga. 1999-07-05 10:03:05 +00:00
Kris Kennaway
d30b1794da Flesh out VOP_ADVLOCK.9 with a description of the available flags
Sync vnode.9 with the definitions in <sys/vnode.h>

Reviewed by:	Doug Rabson
1999-06-30 12:02:52 +00:00
Sheldon Hearn
6bef9f10bb Do nothing for the etc-examples target when SHARED=symlinks, since we'll
end up trying to install into the source directory.

Reported by:	bde
1999-06-27 16:42:25 +00:00
Doug Rabson
0f2a20dfd7 * Tidy up a few things and fix some more warnings.
* Change the devsw declaration to standard form and add missing fields
* Change the filename from cdev_mod.ko to cdev.ko
1999-06-27 12:44:44 +00:00
Mike Pritchard
5d70612b3f Fix some typos and do some minor mdoc cleanup. 1999-06-27 02:38:46 +00:00
Matthew Hunt
084d5338d6 Add Pro/100+ (i82559) to the list of supported products.
Approved by:	dg
1999-06-25 16:48:56 +00:00
Doug Rabson
e523e96f26 Make this sample build again. 1999-06-25 07:50:26 +00:00
John-Mark Gurney
0b60724004 fix the links to the bitstring man page..
fix wording in man page, through != to
1999-06-25 04:51:49 +00:00
John-Mark Gurney
0099533a1c add support to buildworld as a normal user:
-DNOFSCHG	disables installation of libs with flag schg
	GAMEGRP		change the group with which games are installed

also organize the binary section into alphebetical order some what..
1999-06-24 22:50:24 +00:00
Sheldon Hearn
5aae9955b7 Actually install the virgin copies of the /etc files that we so proudly
claim to install in /usr/share/examples/etc/README.examples .

PR:	5207
Reported by:	"Wayne M. Barnes" <wayne@barnes1.wustl.edu>
1999-06-24 09:45:30 +00:00
Mike Pritchard
878c59a1f6 Fix one error in my previous commit. The .Rv macro is not valid
for section 9 man pages.
1999-06-24 00:59:40 +00:00
Mike Pritchard
2c5eecfa59 Update mdoc.samples(7) to reflect that section 9 is a valid man page
section.  Update some descriptions of the various sections to
reflect that they are valid for section 9 man pages.  Add a table
of section numbers and what they are used for.
1999-06-24 00:18:46 +00:00
Kazutaka YOKOTA
69af2750e5 Add Central European, Czech and Slovak keymaps.
PR: misc/11443, misc/11446, misc/11447
Submitted by: G. Adam Stanislav <adam@whizkidtech.net>
1999-06-23 08:14:41 +00:00
Nick Hibma
6dcd4819f1 Add man page for device_quiet and friends 1999-06-22 18:09:54 +00:00
Tim Vanderhoek
3c218dea5c typo: Adviseroty -> Advisory 1999-06-22 02:34:47 +00:00
Nick Hibma
66efee0151 Clarified info on X release 3.3.1.
Submitted/Reviewed by: Joe Touch <touch@ISI.EDU>
1999-06-18 16:53:33 +00:00
Nick Hibma
6979450036 Update the comments on values than can be returned by DEVICE_PROBE.
DEVICE_PROBE can return priorities.

Reviewed by:	Doug Rabson <dfr@nlsystems.com>
1999-06-17 19:22:12 +00:00
Mike Pritchard
145da7ad10 Document the IMPLEMENTATION NOTES section since we have a number of
man pages that use it.

PR:	10659
1999-06-15 19:03:54 +00:00
Bruce Evans
e343fb02c3 Updated the BUGS section. BREAK is now implemented.
Don't document non-bugs in the BUGS section, or anywhere else.  It
is not a bug to drop data when overloaded.  The compile-time tuning
options turned out to be not very useful, and aren't supported
offically.

Documented the not so new option CY_PCI_FASTINTR.
1999-06-14 15:10:35 +00:00
Brian Somers
c6f660d19f Add a rather complicated but impressive example of how
to implement multi-link ppp over more than one ISP with
the ability to lose ISPs without loss of connectivity.

It *requires* that you either have administrative access
to a machine that's already connected to the 'net or at
least know a really nice person that does.
1999-06-09 12:32:55 +00:00
Foxfair Hu
c6570d1dc3 Change locale name of Traditional Chinese : zh_TW.BIG5 -> zh_TW.Big5.
It makes compatible with IANA charset defination, and let existent I18N
app happier.

Ref: <http://www.isi.edu/in-notes/iana/assignments/character-sets>
1999-06-08 02:25:19 +00:00
Bruce Evans
39fbb9465e Fixed previous fix (dad -> rda via rad). 1999-06-07 16:36:41 +00:00
Joseph Koshy
b5d512fa68 Correct typos.
PR:		docs/12068
Submitted by:	Steve Coltrin <spcoltri@io.com>
1999-06-07 05:18:24 +00:00
Matt Jacob
8ead41413c Add a clarification in the man page suggesting that some tapes
(QIC) written under 2.X may not be easily read under the current
driver without explicitly setting to variable mode or to the blocksize
these tapes were written under 2.X with.

PR: 6681
1999-06-06 23:23:50 +00:00
Julian Elischer
8759eb5c80 Support the IANA definition of Shift Jis nameley ja_JP.Shift_JIS
as well as the X11 version ja_JP.SJIS
1999-06-05 03:04:03 +00:00
Bill Fumerola
b10573bf3a sunsite is now metalab. 1999-06-04 03:17:04 +00:00
Bruce Evans
20891aba11 Fixed bitrot in synopsis (a missing include). 1999-06-02 16:33:22 +00:00
Bill Fumerola
03a6bd91f3 'make update' in the ports directory. 1999-06-01 02:55:44 +00:00
Bill Fumerola
7cb30d6da3 procedure, not proceedure. 1999-05-30 21:31:18 +00:00
Nik Clayton
10edb73877 "Tn DNS" -> ".Tn DNS"
PR:             docs/10474
Submitted by:   Yoshiteru Kageyama <yt-kage@cb3.so-net.ne.jp>
1999-05-29 13:08:54 +00:00
Nik Clayton
ffea31c78f Fix a couple of typos related to wfd.
PR:             docs/10624
Submitted by:   Joe Abley <jabley@buddha.clear.net.nz>
1999-05-29 13:08:12 +00:00
Nik Clayton
0bf3e334e5 Description of LOCKLEAF said "inode" when it should have said "vnode".
PR:             docs/11596
Submitted by:   Robert Watson <robert@fledge.watson.org>
1999-05-29 13:00:40 +00:00
Nik Clayton
0de3e1544e Note that using the dirent.d_type member is non-portable, and might
fail on some filesystems.

PR:             docs/11645
Submitted by:   Harold Gutch <logix@foobar.franken.de>
1999-05-29 12:59:51 +00:00
Nik Clayton
2e3912929b Fix the typos, and add new entries (like the /etc/periodic/ and /etc/mail/
directories).

PR:             docs/11695
Submitted by:   Chris Costello <chris@calldei.com>
1999-05-29 12:58:44 +00:00
Bill Paul
74e5e304a4 Fix support for the PNIC II. Earlier I had assumed that the PNIC II was
similar to the PNIC I (supported by the pn driver). In fact, it's really
a Macronix 98715A with wake on LAN support added. According to LinkSys,
the PNIC II was jointly developed by Lite-On and Macronis. I get the
feeling Macronix did most of the work. (The datasheet has the Macronix
logo on it, and is in fact nearly identical to the 98715 datasheet, except
for the extra wake on LAN registers.) In any case, the PNIC II works just
fine with the Macronix driver.

The changes are:

- Move PCI ID for the PNIC II from the pn driver to the mx driver.
- Mention PNIC II support in mx.4.
- Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
1999-05-28 18:43:25 +00:00