Commit Graph

359 Commits

Author SHA1 Message Date
Alan Cox
8d22020384 Replace the single, global page queues lock with per-queue locks on the
active and inactive paging queues.

Reviewed by:	kib
2012-11-13 02:50:39 +00:00
Alan Cox
9fc4739d2a In general, we call pmap_remove_all() before calling vm_page_cache(). So,
the call to pmap_remove_all() within vm_page_cache() is usually redundant.
This change eliminates that call to pmap_remove_all() and introduces a
call to pmap_remove_all() before vm_page_cache() in the one place where
it didn't already exist.

When iterating over a paging queue, if the object containing the current
page has a zero reference count, then the page can't have any managed
mappings.  So, a call to pmap_remove_all() is pointless.

Change a panic() call in vm_page_cache() to a KASSERT().

MFC after:	6 weeks
2012-11-01 16:20:02 +00:00
Edward Tomasz Napierala
a406d8c319 Remove useless check; vm_pindex_t is unsigned on all architectures.
CID:		3701
Found with:	Coverity Prevent
2012-10-28 20:03:57 +00:00
Konstantin Belousov
5050aa86cf Remove the support for using non-mpsafe filesystem modules.
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.

The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.

Conducted and reviewed by:	attilio
Tested by:	pho
2012-10-22 17:50:54 +00:00
Alan Cox
7ecfabc7bb Move vm_page_requeue() to the only file that uses it.
MFC after:	3 weeks
2012-10-13 20:19:43 +00:00
Alan Cox
9af47af64a Eliminate the conditional for releasing the page queues lock in
vm_page_sleep().  vm_page_sleep() is no longer called with this lock
held.

Eliminate assertions that the page queues lock is NOT held.  These
assertions won't translate well to having distinct locks on the active
and inactive page queues, and they really aren't that useful.

MFC after:	3 weeks
2012-10-13 18:46:46 +00:00
Alan Cox
1f11f2bff4 Address a race condition that was introduced in r238212. Unless the page
queues lock is acquired before the page lock is released, there is no
guarantee that the page will still be in that same page queue when
vm_page_requeue() is called.

Reported by:		pho
In collaboration with:	kib
MFC after:	3 days
2012-09-23 17:42:39 +00:00
Eitan Adler
96240c89f0 Correct double "the the"
Approved by:	cperciva
MFC after:	3 days
2012-09-14 21:28:56 +00:00
Alan Cox
18f55b0171 Never sleep on busy pages in vm_pageout_launder(), always skip them. Long
ago, sleeping on busy pages in vm_pageout_launder() made sense.  The call
to vm_pageout_flush() specified asynchronous I/O and sleeping on busy pages
blocked vm_pageout_launder() until the flush had completed.  However, in
CVS revision 1.35 of vm/vm_contig.c, the call to vm_pageout_flush() was
changed to request synchronous I/O, but the sleep on busy pages was not
removed.
2012-08-07 04:48:14 +00:00
Konstantin Belousov
311e34e260 Do not requeue held page or page for which locking failed, just leave
them alone.

Process the act_count updates for the held pages in the vm_pageout
loop over the inactive queue, instead of refusing to do anything with
such page.

Clarify the intent of the addl_page_shortage counter and change its
use for pages which are not processed in the loop according to the
description.

Reviewed by:	alc
MFC after:	2 weeks
2012-07-26 09:06:48 +00:00
Alan Cox
2cba1ccd0e Addendum to r238604. If the inactive queue scan isn't restarted, then
the variable "addl_page_shortage_init" isn't needed.

X-MFC after:	r238604
2012-07-24 02:35:30 +00:00
Konstantin Belousov
d4961bcb3a Do not restart scan of the inactive queue when non-inactive page is
found. Rather, we shall not find such pages on inactive queue at all.

Requested and reviewed by:	alc
MFC after:    2 weeks
2012-07-18 21:47:50 +00:00
Alan Cox
85eeca35b9 Move what remains of vm/vm_contig.c into vm/vm_pageout.c, where similar
code resides.  Rename vm_contig_grow_cache() to vm_pageout_grow_cache().

Reviewed by:	kib
2012-07-18 05:21:34 +00:00
Konstantin Belousov
a4156419ca Avoid vm page queues lock leak after r238212.
Reported and tested by:	Michael Butler <imb protected-networks net>
Reviewed by:	alc
Pointy hat to:	kib
MFC after:	20 days
2012-07-08 18:04:26 +00:00
Konstantin Belousov
48cc2fc774 Drop page queues mutex on each iteration of vm_pageout_scan over the
inactive queue, unless busy page is found.

Dropping the mutex often should allow the other lock acquires to
proceed without waiting for whole inactive scan to finish. On machines
with lot of physical memory scan often need to iterate a lot before it
finishes or finds a page which requires laundring, causing high
latency for other lock waiters.

Suggested and reviewed by:	alc
MFC after:	3 weeks
2012-07-07 19:39:08 +00:00
Konstantin Belousov
5d10ef2096 Style.
Reviewed by:	alc (previous version)
MFC after:	1 week
2012-07-06 20:13:16 +00:00
Alan Cox
6031c68de4 The page flag PGA_WRITEABLE is set and cleared exclusively by the pmap
layer, but it is read directly by the MI VM layer.  This change introduces
pmap_page_is_write_mapped() in order to completely encapsulate all direct
access to PGA_WRITEABLE in the pmap layer.

Aesthetics aside, I am making this change because amd64 will likely begin
using an alternative method to track write mappings, and having
pmap_page_is_write_mapped() in place allows me to make such a change
without further modification to the MI VM layer.

As an added bonus, tidy up some nearby comments concerning page flags.

Reviewed by:	kib
MFC after:	6 weeks
2012-06-16 18:56:19 +00:00
Konstantin Belousov
7900f95d88 Assert that fictitious or unmanaged pages do not appear on
active/inactive lists.

Sponsored by:	The FreeBSD Foundation
Reviewed by:	alc
MFC after:	1 month
2012-05-12 20:24:46 +00:00
Konstantin Belousov
126d60823a In vm_object_page_clean(), do not clean OBJ_MIGHTBEDIRTY object flag
if the filesystem performed short write and we are skipping the page
due to this.

Propogate write error from the pager back to the callers of
vm_pageout_flush().  Report the failure to write a page from the
requested range as the FALSE return value from vm_object_page_clean(),
and propagate it back to msync(2) to return EIO to usermode.

While there, convert the clearobjflags variable in the
vm_object_page_clean() and arguments of the helper functions to
boolean.

PR:	kern/165927
Reviewed by:	alc
MFC after:	2 weeks
2012-03-17 23:00:32 +00:00
Nathan Whitehorn
8d01a3b281 Revert r212360 now that PowerPC can handle large sparse arguments to
pmap_remove() (changed in r228412).

MFC after:	2 weeks
2012-01-17 00:31:09 +00:00
Konstantin Belousov
3407fefef6 Split the vm_page flags PG_WRITEABLE and PG_REFERENCED into atomic
flags field. Updates to the atomic flags are performed using the atomic
ops on the containing word, do not require any vm lock to be held, and
are non-blocking. The vm_page_aflag_set(9) and vm_page_aflag_clear(9)
functions are provided to modify afalgs.

Document the changes to flags field to only require the page lock.

Introduce vm_page_reference(9) function to provide a stable KPI and
KBI for filesystems like tmpfs and zfs which need to mark a page as
referenced.

Reviewed by:    alc, attilio
Tested by:      marius, flo (sparc64); andreast (powerpc, powerpc64)
Approved by:	re (bz)
2011-09-06 10:30:11 +00:00
Edward Tomasz Napierala
afcc55f318 All the racct_*() calls need to happen with the proc locked. Fixing this
won't happen before 9.0.  This commit adds "#ifdef RACCT" around all the
"PROC_LOCK(p); racct_whatever(p, ...); PROC_UNLOCK(p)" instances, in order
to avoid useless locking/unlocking in kernels built without "options RACCT".
2011-07-06 20:06:44 +00:00
Alan Cox
a8229fa37c Initialize marker pages as held rather than fictitious/wired. Marking the
page as held is more useful as a safety precaution in case someone forgets
to check for PG_MARKER.

Reviewed by:	kib
2011-07-02 23:34:47 +00:00
Edward Tomasz Napierala
f497cda257 In vm_daemon(), do not skip processes stopped with SIGSTOP. 2011-04-06 16:27:04 +00:00
Edward Tomasz Napierala
099e7e950f Add RACCT_RSS.
Sponsored by:	The FreeBSD Foundation
Reviewed by:	kib (earlier version)
2011-04-06 16:24:24 +00:00
John Baldwin
8e6fa660f2 Fix some locking nits with the p_state field of struct proc:
- Hold the proc lock while changing the state from PRS_NEW to PRS_NORMAL
  in fork to honor the locking requirements.  While here, expand the scope
  of the PROC_LOCK() on the new process (p2) to avoid some LORs.  Previously
  the code was locking the new child process (p2) after it had locked the
  parent process (p1).  However, when locking two processes, the safe order
  is to lock the child first, then the parent.
- Fix various places that were checking p_state against PRS_NEW without
  having the process locked to use PROC_LOCK().  Every place was already
  locking the process, just after the PRS_NEW check.
- Remove or reduce the use of PROC_SLOCK() for places that were checking
  p_state against PRS_NEW.  The PROC_LOCK() alone is sufficient for reading
  the current state.
- Reorder fill_kinfo_proc() slightly so it only acquires PROC_SLOCK() once.

MFC after:	1 week
2011-03-24 18:40:11 +00:00
Edward Tomasz Napierala
3fccbe4397 In vm_daemon(), when iterating over all processes in the system, skip those
which are not yet fully initialized (i.e. ones with p_state == PRS_NEW).
Without it, we could panic in _thread_lock_flags().

Note that there may be other instances of FOREACH_PROC_IN_SYSTEM() that
require similar fix.

Reported by:	pho, keramida
Discussed with:	kib
2011-03-18 06:47:23 +00:00
Alan Cox
4c6a2e7a1f Shift responsibility for synchronizing access to the page's act_count
field to the object's lock.

Reviewed by:	kib@
2011-01-16 18:01:39 +00:00
Alan Cox
17f6a17bf7 Release the page lock early in vm_pageout_clean(). There is no reason to
hold this lock until the end of the function.

With the aforementioned change to vm_pageout_clean(), page locks don't need
to support recursive (MTX_RECURSE) or duplicate (MTX_DUPOK) acquisitions.

Reviewed by:	kib
2011-01-03 00:41:56 +00:00
Konstantin Belousov
1e8a675c73 vm_pageout_flush() might cache the pages that finished write to the
backing storage. Such pages might be then reused, racing with the
assert in vm_object_page_collect_flush() that verified that dirty
pages from the run (most likely, pages with VM_PAGER_AGAIN status) are
write-protected still. In fact, the page indexes for the pages that
were removed from the object page list should be ignored by
vm_object_page_clean().

Return the length of successfully written run from vm_pageout_flush(),
that is, the count of pages between requested page and first page
after requested with status VM_PAGER_AGAIN. Supply the requested page
index in the array to vm_pageout_flush(). Use the returned run length
to forward the index of next page to clean in vm_object_page_clean().

Reported by:	avg
Reviewed by:	alc
MFC after:	1 week
2010-11-18 21:09:02 +00:00
Nathan Whitehorn
42768fec0f On architectures with non-tree-based page tables like PowerPC, every page
in a range must be checked when calling pmap_remove(). Calling
pmap_remove() from vm_pageout_map_deactivate_pages() with the entire range
of the map could result in attempting to demap an extraordinary number
of pages (> 10^15), so iterate through each map entry and unmap each of
them individually.

MFC after:	6 weeks
2010-09-09 13:32:58 +00:00
Alan Cox
cdaba1f2be Push down the acquisition of the page queues lock into
vm_pageout_page_stats().  In particular, avoid acquiring the page
queues lock unless iterating over the active queue.
2010-07-02 20:56:22 +00:00
Alan Cox
9cf5198832 With the demise of page coloring, the page queue macros no longer serve any
useful purpose.  Eliminate them.

Reviewed by:	kib
2010-07-02 15:02:51 +00:00
Alan Cox
95976f3f38 Simplify entry to vm_pageout_clean(). Expect the page to be locked.
Previously, the caller unlocked the page, and vm_pageout_clean()
immediately reacquired the page lock.  Also, assert rather than test
that the page is neither busy nor held.  Since vm_pageout_clean() is
called with the object and page locked, the page can't have changed
state since the caller verified that the page is neither busy nor
held.
2010-06-30 17:20:33 +00:00
Alan Cox
91b4f42767 Introduce vm_page_next() and vm_page_prev(), and use them in
vm_pageout_clean().  When iterating over a range of pages, these functions
can be cheaper than vm_page_lookup() because their implementation takes
advantage of the vm_object's memq being ordered.

Reviewed by:	kib@
MFC after:	3 weeks
2010-06-21 23:27:24 +00:00
Alan Cox
9ee2165f5d Eliminate checks for a page having a NULL object in vm_pageout_scan()
and vm_pageout_page_stats().  These checks were recently introduced by
the first page locking commit, r207410, but they are not needed.  At
the same time, eliminate some redundant accesses to the page's object
field.  (These accesses should have neen eliminated by r207410.)

Make the assertion in vm_page_flag_set() stricter.  Specifically, only
managed pages should have PG_WRITEABLE set.

Add a comment documenting an assertion to vm_page_flag_clear().

It has long been the case that fictitious pages have their wire count
permanently set to one.  Add comments to vm_page_wire() and
vm_page_unwire() documenting this.  Add assertions to these functions
as well.

Update the comment describing vm_page_unwire().  Much of the old
comment had little to do with vm_page_unwire(), but a lot to do with
_vm_page_deactivate().  Move relevant parts of the old comment to
_vm_page_deactivate().

Only pages that belong to an object can be paged out.  Therefore, it
is pointless for vm_page_unwire() to acquire the page queues lock and
enqueue such pages in one of the paging queues.  Generally speaking,
such pages are immediately freed after the call to vm_page_unwire().
Previously, it was the call to vm_page_free() that reacquired the page
queues lock and removed these pages from the paging queues.  Now, we
will never acquire the page queues lock for this case.  (It is also
worth noting that since both vm_page_unwire() and vm_page_free()
occurred with the page locked, the page daemon never saw the page with
its object field set to NULL.)

Change the panic with vm_page_unwire() to provide a more precise message.

Reviewed by:	kib@
2010-06-14 19:54:19 +00:00
Alan Cox
ce18658792 Reduce the scope of the page queues lock and the number of
PG_REFERENCED changes in vm_pageout_object_deactivate_pages().
Simplify this function's inner loop using TAILQ_FOREACH(), and shorten
some of its overly long lines.  Update a stale comment.

Assert that PG_REFERENCED may be cleared only if the object containing
the page is locked.  Add a comment documenting this.

Assert that a caller to vm_page_requeue() holds the page queues lock,
and assert that the page is on a page queue.

Push down the page queues lock into pmap_ts_referenced() and
pmap_page_exists_quick().  (As of now, there are no longer any pmap
functions that expect to be called with the page queues lock held.)

Neither pmap_ts_referenced() nor pmap_page_exists_quick() should ever
be passed an unmanaged page.  Assert this rather than returning "0"
and "FALSE" respectively.

ARM:

Simplify pmap_page_exists_quick() by switching to TAILQ_FOREACH().

Push down the page queues lock inside of pmap_clearbit(), simplifying
pmap_clear_modify(), pmap_clear_reference(), and pmap_remove_write().
Additionally, this allows for avoiding the acquisition of the page
queues lock in some cases.

PowerPC/AIM:

moea*_page_exits_quick() and moea*_page_wired_mappings() will never be
called before pmap initialization is complete.  Therefore, the check
for moea_initialized can be eliminated.

Push down the page queues lock inside of moea*_clear_bit(),
simplifying moea*_clear_modify() and moea*_clear_reference().

The last parameter to moea*_clear_bit() is never used.  Eliminate it.

PowerPC/BookE:

Simplify mmu_booke_page_exists_quick()'s control flow.

Reviewed by:	kib@
2010-06-10 16:56:35 +00:00
Alan Cox
567e51e18c Roughly half of a typical pmap_mincore() implementation is machine-
independent code.  Move this code into mincore(), and eliminate the
page queues lock from pmap_mincore().

Push down the page queues lock into pmap_clear_modify(),
pmap_clear_reference(), and pmap_is_modified().  Assert that these
functions are never passed an unmanaged page.

Eliminate an inaccurate comment from powerpc/powerpc/mmu_if.m:
Contrary to what the comment says, pmap_mincore() is not simply an
optimization.  Without a complete pmap_mincore() implementation,
mincore() cannot return either MINCORE_MODIFIED or MINCORE_REFERENCED
because only the pmap can provide this information.

Eliminate the page queues lock from vfs_setdirty_locked_object(),
vm_pageout_clean(), vm_object_page_collect_flush(), and
vm_object_page_clean().  Generally speaking, these are all accesses
to the page's dirty field, which are synchronized by the containing
vm object's lock.

Reduce the scope of the page queues lock in vm_object_madvise() and
vm_page_dontneed().

Reviewed by:	kib (an earlier version)
2010-05-24 14:26:57 +00:00
Alan Cox
3c4a24406b Push down the page queues into vm_page_cache(), vm_page_try_to_cache(), and
vm_page_try_to_free().  Consequently, push down the page queues lock into
pmap_enter_quick(), pmap_page_wired_mapped(), pmap_remove_all(), and
pmap_remove_write().

Push down the page queues lock into Xen's pmap_page_is_mapped().  (I
overlooked the Xen pmap in r207702.)

Switch to a per-processor counter for the total number of pages cached.
2010-05-08 20:34:01 +00:00
Jung-uk Kim
af394cfa36 Fix a typo in the previous commit. 2010-05-07 21:06:52 +00:00
Konstantin Belousov
af4b86b949 One more use for vm_pageout_init_marker().
Reviewed by:	alc
2010-05-07 18:57:26 +00:00
Konstantin Belousov
8c6162468b Add a helper function vm_pageout_page_lock(), similar to tegge'
vm_pageout_fallback_object_lock(), to obtain the page lock
while having page queue lock locked, and still maintain the
page position in a queue.

Use the helper to lock the page in the pageout daemon and contig launder
iterators instead of skipping the page if its lock is contested.
Skipping locked pages easily causes pagedaemon or launder to not make a
progress with page cleaning.

Proposed and reviewed by:	alc
2010-05-06 04:57:33 +00:00
Alan Cox
6c56db5c9e Eliminate an assignment that was made redundant by r207410. 2010-05-02 21:04:59 +00:00
Alan Cox
447fe2a4c6 Defer the acquisition of the page and page queues locks in
vm_pageout_object_deactivate_pages().
2010-05-02 20:46:17 +00:00
Kip Macy
7bec141b12 push up dropping of the page queue lock to avoid holding it in vm_pageout_flush 2010-04-30 22:31:37 +00:00
Kip Macy
e8f263195d - don't check hold_count without the page lock held
- don't leak the page lock if m->object is NULL
  (assuming that that check will in fact even be valid when m->object is protected by the page lock)
2010-04-30 19:40:37 +00:00
Kip Macy
2965a45315 On Alan's advice, rather than do a wholesale conversion on a single
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.

Supported by: Bitgravity Inc.

Discussed with: alc, jeffr, and kib
2010-04-30 00:46:43 +00:00
Alan Cox
82bfb965d1 Simplify the inner loop of vm_pageout_object_deactivate_pages(). Rather
than checking each page for PG_UNMANAGED, check the vm object's type.
Only OBJT_PHYS can have unmanaged pages.  Eliminate a pointless counter.
The vm object is locked, that lock is never released by the inner loop,
and the set of pages contained by the vm object is not changed by the
inner loop.  Therefore, the counter serves no purpose.
2010-04-29 16:18:45 +00:00
Alan Cox
5d4a7b7945 Eliminate an unnecessary call to pmap_remove_all(). If a page belongs to
an object whose reference count is zero, then that page cannot possibly
be mapped.
2010-04-20 04:16:39 +00:00
Alan Cox
b28889a2fc Remove a nonsensical test from vm_pageout_clean(). A page can't be in the
inactive queue and have a non-zero wire count.

Reviewed by:	kib
MFC after:	3 weeks
2010-04-18 21:29:28 +00:00