Commit Graph

120 Commits

Author SHA1 Message Date
Brian Behlendorf
3b6425cb5b Fix atomic_sub_64() i386 assembly implementation
The atomic_sub_64() should use sbbl instead of adcl.  In user
space these atomics are used for statistics tracking and aren't
critical which explain how this was overlooked.  The kernel
space implementation of these atomics are layered on the
architecture specific implementations provided by the kernel.

Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5671 
Closes #5717
2017-02-01 09:36:47 -08:00
George Melikov
4ea3f86426 codebase style improvements for OpenZFS 6459 port 2017-01-22 13:25:40 -08:00
ka7
4e33ba4c38 Fix spelling
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5547 
Closes #5543
2017-01-03 11:31:18 -06:00
Brian Behlendorf
02730c333c Use cstyle -cpP in make cstyle check
Enable picky cstyle checks and resolve the new warnings.  The vast
majority of the changes needed were to handle minor issues with
whitespace formatting.  This patch contains no functional changes.

Non-whitespace changes are as follows:

* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5465
2016-12-12 10:46:26 -08:00
Chunwei Chen
9829574834 ABD optimized page allocation code
* Convert ABD to use the Linux Kernel scatterlist implementation
  instead of the hand rolled one from illumos.

* Scatter ABDs are preferentially populated with higher order
  compound pages from a single zone.  Allocation size is
  progressively decreased until it can be satisfied without
  performing reclaim or compaction.

* An alternate page allocator is provided for kernels older
  than 3.6 and for CONFIG_HIGHMEM systems.  This allocator
  is designed as a fallback for maximum compatibility.

* Extended abdstats to provide visibility in the the allocator.

* Add cached value for PAGESIZE in userspace.

Contributions-by:
Chunwei Chen <david.chen@osnexus.com>
Gvozden Neskovic <neskovic@gmail.com>
Jinshan Xiong <jinshan.xiong@intel.com>
Isaac Huang <he.huang@intel.com>
David Quigley <david.quigley@intel.com>
Brian Behlendorf <behlendorf1@llnl.gov>
2016-11-29 14:34:33 -08:00
luozhengzheng
9a875c6c5d Fix coverity defects: CID 150921, 150927
CID 150921: Unchecked return value (CHECKED_RETURN)
CID 150927 : Unchecked return value (CHECKED_RETURN)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: luozhengzheng <luo.zhengzheng@zte.com.cn>
Closes #5267
2016-10-14 09:40:08 -07:00
Tony Hutter
3c67d83a8a OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported by: Tony Hutter <hutter2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/4185
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee

Porting Notes:
This code is ported on top of the Illumos Crypto Framework code:

    b5e030c8db

The list of porting changes includes:

- Copied module/icp/include/sha2/sha2.h directly from illumos

- Removed from module/icp/algs/sha2/sha2.c:
	#pragma inline(SHA256Init, SHA384Init, SHA512Init)

- Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since
  it now takes in an extra parameter.

- Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c

- Added skein & edonr to libicp/Makefile.am

- Added sha512.S.  It was generated from sha512-x86_64.pl in Illumos.

- Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument.

- In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section
  to not #include the non-existant endian.h.

- In skein_test.c, renane NULL to 0 in "no test vector" array entries to get
  around a compiler warning.

- Fixup test files:
	- Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>,
	- Remove <note.h> and define NOTE() as NOP.
	- Define u_longlong_t
	- Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p"
	- Rename NULL to 0 in "no test vector" array entries to get around a
	  compiler warning.
	- Remove "for isa in $($ISAINFO); do" stuff
	- Add/update Makefiles
	- Add some userspace headers like stdio.h/stdlib.h in places of
	  sys/types.h.

- EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules.

- Update scripts/zfs2zol-patch.sed

- include <sys/sha2.h> in sha2_impl.h

- Add sha2.h to include/sys/Makefile.am

- Add skein and edonr dirs to icp Makefile

- Add new checksums to zpool_get.cfg

- Move checksum switch block from zfs_secpolicy_setprop() to
  zfs_check_settable()

- Fix -Wuninitialized error in edonr_byteorder.h on PPC

- Fix stack frame size errors on ARM32
  	- Don't unroll loops in Skein on 32-bit to save stack space
  	- Add memory barriers in sha2.c on 32-bit to save stack space

- Add filetest_001_pos.ksh checksum sanity test

- Add option to write psudorandom data in file_write utility
2016-10-03 14:51:15 -07:00
Gvozden Neskovic
031d7c2fe6 fix: Shift exponent too large
Undefined operation is reported by running ztest (or zloop) compiled with GCC
UndefinedBehaviorSanitizer. Error only happens on top level of dnode indirection
with large enough offset values. Logically, left shift operation would work,
but bit shift semantics in C, and limitation of uint64_t, do not produce desired
result.

Issue #5059, #4883

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
2016-09-29 15:55:41 -07:00
slashdd
792517389f Change /etc/mtab to /proc/self/mounts
Fix misleading error message:

 "The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes #4680 
Closes #5029
2016-09-20 10:07:58 -07:00
Hans Rosenfeld
fb390aafc8 OpenZFS 5997 - FRU field not set during pool creation and never updated
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Josef Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Signed-off-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/5997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283

Porting Notes:

In addition to the OpenZFS changes this patch realigns the events
with those found in OpenZFS.

Events which would be logged as sysevents on illumos have been
been mapped to the 'sysevent' class for Linux.  In addition, several
subclass names have been changed to match what is used in OpenZFS.
In all cases this means a '.' was changed to an '_' in the subclass.

The scripts provided by ZoL have been updated, however users which
provide scripts for any of the following events will need to rename
them based on the new subclass names.

  ereport.fs.zfs.config.sync         sysevent.fs.zfs.config_sync
  ereport.fs.zfs.zpool.destroy       sysevent.fs.zfs.pool_destroy
  ereport.fs.zfs.zpool.reguid        sysevent.fs.zfs.pool_reguid
  ereport.fs.zfs.vdev.remove         sysevent.fs.zfs.vdev_remove
  ereport.fs.zfs.vdev.clear          sysevent.fs.zfs.vdev_clear
  ereport.fs.zfs.vdev.check          sysevent.fs.zfs.vdev_check
  ereport.fs.zfs.vdev.spare          sysevent.fs.zfs.vdev_spare
  ereport.fs.zfs.vdev.autoexpand     sysevent.fs.zfs.vdev_autoexpand
  ereport.fs.zfs.resilver.start      sysevent.fs.zfs.resilver_start
  ereport.fs.zfs.resilver.finish     sysevent.fs.zfs.resilver_finish
  ereport.fs.zfs.scrub.start         sysevent.fs.zfs.scrub_start
  ereport.fs.zfs.scrub.finish        sysevent.fs.zfs.scrub_finish
  ereport.fs.zfs.bootfs.vdev.attach  sysevent.fs.zfs.bootfs_vdev_attach
2016-08-12 13:06:48 -07:00
Tom Caputi
0b04990a5d Illumos Crypto Port module added to enable native encryption in zfs
A port of the Illumos Crypto Framework to a Linux kernel module (found
in module/icp). This is needed to do the actual encryption work. We cannot
use the Linux kernel's built in crypto api because it is only exported to
GPL-licensed modules. Having the ICP also means the crypto code can run on
any of the other kernels under OpenZFS. I ended up porting over most of the
internals of the framework, which means that porting over other API calls (if
we need them) should be fairly easy. Specifically, I have ported over the API
functions related to encryption, digests, macs, and crypto templates. The ICP
is able to use assembly-accelerated encryption on amd64 machines and AES-NI
instructions on Intel chips that support it. There are place-holder
directories for similar assembly optimizations for other architectures
(although they have not been written).

Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4329
2016-07-20 10:43:30 -07:00
Brian Behlendorf
f74b821a66 Add zfs allow and zfs unallow support
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00
YunQiang Su
2493dca54e Add isa_defs for MIPS
GCC for MIPS only defines _LP64 when 64bit,
while no _ILP32 defined when 32bit.

Signed-off-by: YunQiang Su <syq@debian.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4712
2016-05-31 09:05:40 -07:00
Tony Hutter
193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
David Quigley
ae6d0c601e OpenZFS 6672 - arc_reclaim_thread() should use gethrtime()
6672 arc_reclaim_thread() should use gethrtime() instead of ddi_get_lbolt()

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: David Quigley <dpquigl@davequigley.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6672
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/571be5c
Closes #4600
2016-05-06 09:35:52 -07:00
Brian Behlendorf
1ab3678b5d Add support for libtirpc
While OpenSolaris libc and glibc both include XDR support, the musl libc
does not in favor of depending on the BSD-licensed libtirpc library.

Adding support is a simple matter of detecting the library, including
the headers and linking against it.  By default libtirpc will be checked
for and if available used.  Otherwise, configure will fall back to using
the xdr implementation provided by libc if available.  The options
--with-tirpc/--without-tirpc can be used to disable this checking.

In addition, the xdr_control() function has been simplied to only
handle ZFSs specific use case.

Original-patch-by: stf <s@ctrlc.hu>
Original-patch-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Closes #2254
Closes #4559
2016-04-28 09:27:40 -07:00
Don Brady
39fc0cb557 Add support for devid and phys_path keys in vdev disk labels
This is foundational work for ZED.

Updates a leaf vdev's persistent device strings on Linux platform

* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES

Some examples:

    path: '/dev/sdb1'
    devid: 'scsi-350000394a8ca4fbc-part1'
    phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'

    path: '/dev/mapper/mpatha'
    devid: 'dm-uuid-mpath-35000c5006304de3f'

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2856
Closes #3978
Closes #4416
2016-03-31 13:45:53 -07:00
Brian Behlendorf
726c4a2565 Remove complicated libspl assert wrappers
Effectively provide our own version of assert()/verify() for use
in user space.  This minimizes our dependencies and aligns the
user space assertion handling with what's used in the kernel.

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4449
2016-03-30 12:26:42 -07:00
Carlo Landmeter
1ad32f0a18 Move hrtime_t timestruc_t and timespec_t
hrtime_t timestruc_t and timespec_t should have originally been
included in sys/time.h so lets move them.

longlong_t is not defined by any standard so change it to long long

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4459
2016-03-29 18:33:17 -07:00
Carlo Landmeter
43148eaef2 Set _DATE_FMT to '%+' if not defined in libspl/timestamp.c
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4458
2016-03-29 18:33:17 -07:00
Carlo Landmeter
fc46c795e1 Include sys/types.h in devid.h
This is needed for musl libc

Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4454
2016-03-29 18:33:17 -07:00
Dimitri John Ledkov
a1bc34c0a7 Add support for s390[x].
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4425
2016-03-17 09:58:01 -07:00
Gordan Bobic
d76d9c696a Fix aarch64 compilation
sys/param.h depends on types defined in sys/types.h
(hrtime_t & timestruc_t).

Signed-off-by: Gordan Bobic <gordan@redsleeve.org>
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4420
2016-03-15 18:34:26 -07:00
Brian Behlendorf
ae3a373566 Linux 4.5 compat: pfn_t typedef
The pfn_t typedef was inherited from Illumos but never directly
used by any libspl consumers.  This doesn't cause any issues in
user space but for consistency with the kernel build it has been
removed.  See torvalds/linux/commit/34c0fd54.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
2016-01-20 11:37:33 -08:00
Brian Behlendorf
a22502c9e6 Either _ILP32 or _LP64 must be defined
For some arm, powerpc, and sparc platforms it was possible that
neither _ILP32 of _LP64 would be defined.  Update the isa_defs.h
header to explicitly set these macros and generate a compile error
in the case neither are defined.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #4048
2015-12-10 11:55:38 -08:00
Jason Zaman
5c790678f1 sysmacros: Make P2ROUNDUP not trigger int overflow
The original P2ROUNDUP and P2ROUNDUP_TYPED macros contain -x which
triggers PaX's integer overflow detection for unsigned integers.
Replace the macros with an equivalent version that does not trigger
the overflow.

Axioms:
A. (-(x)) === (~((x) - 1)) === (~(x) + 1) under two's complement.
B. ~(x & y) === ((~(x)) | (~(y))) under De Morgan's law.
C. ~(~x) === x under the law of excluded middle.

Proof:
0. (-(-(x) & -(align))) original
1. (~(-(x) & -(align)) + 1) by A
2. (((~(-(x))) | (~(-(align)))) + 1) by B
3. (((~(~((x) - 1))) | (~(~((align) - 1)))) + 1) by A
4. (((((x) - 1)) | (((align) - 1))) + 1) by C
Q.E.D.

Signed-off-by: Jason Zaman <jason@perfinion.com>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3949
2015-11-16 16:10:07 -08:00
Brian Behlendorf
0282c4137e Add temporary mount options
Add the required kernel side infrastructure to parse arbitrary
mount options.  This enables us to support temporary mount
options in largely the same way it is handled on other platforms.

See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #985
Closes #3351
2015-09-03 14:14:55 -07:00
Turbo Fredriksson
47a4a6fd5f Support parallel build trees (VPATH builds)
Build products from an out of tree build should be written
relative to the build directory.  Sources should be referred
to by their locations in the source directory.

This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile.  This enables the following:

  $ mkdir build
  $ cd build
  $ ../configure \
    --with-spl=$HOME/src/git/spl/ \
    --with-spl-obj=$HOME/src/git/spl/build
  $ make -s

This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.

  Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
  Makefile.am:00: but option 'subdir-objects' is disabled

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1082
2015-07-17 13:42:51 -07:00
George Wilson
669dedb33f Illumos 5163 - arc should reap range_seg_cache
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5163
  https://github.com/illumos/illumos-gate/commit/83803b5

Porting Notes:

Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-25 08:58:16 -07:00
Brian Behlendorf
fa720217b9 Add IMPLY() and EQUIV() macros
Added for upstream compatibility, they are of the form:

* IMPLY(a, b) - if (a) then (b)
* EQUIV(a, b) - if (a) then (b) *AND* if (b) then (a)

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-24 15:11:48 -07:00
Brian Behlendorf
3df293404a Fix type mismatch on 32-bit systems
The umem_alloc_aligned() function should not assume that a 'void *'
type is 64-bit.  It will not be on 32-bit platforms.  Rather than
complicating the ASSERT to handle this it is simply removed.

Additionally, the '%lu' format specifier should not be assumed to
imply a 64-bit value.  Fix this by using the 'llu' format specifier
which will always be atleast 64-bit and explicitly casing the
variable to an u_longlong_t.  This issue is handled the same way
in many other parts of the code.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-05-11 12:15:41 -07:00
Jerry Jelinek
788eb90c4c Illumos 3897 - zfs filesystem and snapshot limits
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3897
  https://github.com/illumos/illumos-gate/commit/a2afb61

Porting Notes:

dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:22:51 -07:00
Prakash Surya
0b39b9f96f Swap DTRACE_PROBE* with Linux tracepoints
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.

The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:

    * A number of external tools can make use of our tracepoints
      "automatically" (e.g. perf, systemtap)
    * Tracepoints are designed to be extremely cheap when disabled
    * It's one of the "accepted" ways to export this kind of
      information; many other kernel subsystems use tracepoints too.

Unfortunately, though, there are a few caveats as well:

    * Linux tracepoints appear to only be available to GPL licensed
      modules due to the way certain kernel functions are exported.
      Thus, to actually make use of the tracepoints introduced by this
      patch, one might have to patch and re-compile the kernel;
      exporting the necessary functions to non-GPL modules.

    * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
      tracepoints are not available for unsigned kernel modules
      (tracepoints will get disabled due to the module's 'F' taint).
      Thus, one either has to sign the zfs kernel module prior to
      loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
      newer.

Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):

    # list all zfs tracepoints available

    $ ls /sys/kernel/debug/tracing/events/zfs
    enable              filter              zfs_arc__delete
    zfs_arc__evict      zfs_arc__hit        zfs_arc__miss
    zfs_l2arc__evict    zfs_l2arc__hit      zfs_l2arc__iodone
    zfs_l2arc__miss     zfs_l2arc__read     zfs_l2arc__write
    zfs_new_state__mfu  zfs_new_state__mru

    # enable all zfs tracepoints, clear the tracepoint ring buffer

    $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
    $ echo 0 > /sys/kernel/debug/tracing/trace

    # import zpool called 'tank', inspect tracepoint data (each line was
    # truncated, they're too long for a commit message otherwise)

    $ zpool import tank
    $ cat /sys/kernel/debug/tracing/trace | head -n35
    # tracer: nop
    #
    # entries-in-buffer/entries-written: 1219/1219   #P:8
    #
    #                              _-----=> irqs-off
    #                             / _----=> need-resched
    #                            | / _---=> hardirq/softirq
    #                            || / _--=> preempt-depth
    #                            ||| /     delay
    #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
    #              | |       |   ||||       |         |
            lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
          z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
          z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
          z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
          z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
          z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
          z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
          z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...

To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:

    lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
        hdr {
            dva 0x1:0x40082
            birth 15491
            cksum0 0x163edbff3a
            flags 0x640
            datacnt 1
            type 1
            size 2048
            spa 3133524293419867460
            state_type 0
            access 0
            mru_hits 0
            mru_ghost_hits 0
            mfu_hits 0
            mfu_ghost_hits 0
            l2_hits 0
            refcount 1
        } bp {
            dva0 0x1:0x40082
            dva1 0x1:0x3000e5
            dva2 0x1:0x5a006e
            cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
            lsize 2048
        } zb {
            objset 0
            object 0
            level -1
            blkid 0
        }

For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.

For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:

    * http://lwn.net/Articles/379903/
    * http://lwn.net/Articles/381064/
    * http://lwn.net/Articles/383362/

I should also node the more "boring" aspects of this patch:

    * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
       support a sixth paramter. This parameter is used to populate the
       contents of the new conftest.h file. If no sixth parameter is
       provided, conftest.h will be empty.

    * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
      This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
      except it has support for a fifth option that is then passed as
      the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.

These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).

    * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
      is to determine if we can safely enable the Linux tracepoint
      functionality. We need to selectively disable the tracepoint code
      due to the kernel exporting certain functions as GPL only. Without
      this check, the build process will fail at link time.

In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-11-17 11:13:55 -08:00
Brian Behlendorf
f0e324f25d Update utsname support
Modify the code to use the utsname() kernel function rather than
a global variable.  This results is cleaner more portable code
because utsname() is already provided by the kernel and can be
easily emulated in user space via uname(2).  This means that it
will behave consistently in both contexts.

This is also has the benefit that it allows the removal of a few
_KERNEL pre-processor conditions.  And it also is a pre-requisite
for a proper FUSE port because we need to provide a valid utsname.

Finally, it allows us to remove this functionality from the SPL
and all the related compatibility code.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
2014-10-17 14:58:57 -07:00
Brian Behlendorf
9ad656b2d0 Retire HAVE_IOCTL_* configure checks
The HAVE_IOCTL_* configure checks were originally added for
compatibility with an ancient version of glibc.  This support
and additional complexity is no longer needed and is therefore
being removed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes #585
2014-08-28 07:45:54 -07:00
Alec Salazar
449e75d768 Avoid PAGESIZE redefinition
Add #ifndef PAGESIZE to avoid redefinition warning on platforms
where this value is already provided.

Signed-off-by: Alec Salazar <alec.j.salazar@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2588
2014-08-13 10:36:09 -07:00
Alec Salazar
22a11a5b5a Replace __va_list with va_list
Most of the code base already uses va_list, which is specified by
iso-c. gcc/glibc provides 'typedef __gnuc_va_list va_list'. and
when not using gcc/glibc we can't expect to find __gnuc_va_list.

Signed-off-by: Alec Salazar <alec.j.salazar@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2588
2014-08-13 10:35:00 -07:00
Marcel Huber
58bd7ad060 Omit compiler warning by sticking to RAII
Resolve gcc 4.9.0 20140507 warnings about uninitialized 'ptr' when
using -Wmaybe-uninitialized.  The first two cases appears appear
to be legitimate but not the second two.  In general this is a
good practice so they are all initialized.

Signed-off-by: Marcel Huber <marcelhuberfoo@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2345
2014-05-22 09:44:15 -07:00
Richard Yao
3af3df905f libspl: Implement LWP rwlock interface
This implements a subset of the LWP rwlock interface by wrapping the
equivalent POSIX thread interface. It is a superset of the features
needed by ztest.

The missing bits are {,_}rw_read_held() and {,_}rw_write_held().

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1970
2014-05-01 15:53:52 -07:00
Jorgen Lundman
cdf37f0c59 Add support for aarch64 (ARMv8)
Using the ARM reference simulation (fast model foundation v8) I
cross compiled spl and zfs, to confirm it works on ARMv8 (64 bit
arm architecture, called aarch64 in Linux).

As it is based on previous ARM porting, the resulting patch is
disappointingly small, there was very little to do. The code fixes
the compile issues and has light testing done.

Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2260
2014-04-25 15:35:30 -07:00
Chris Dunlap
7368eb621e Set errno for mkdirp() called with NULL path ptr
If mkdirp() is called with a NULL ptr for the path arg, it will return
-1 with errno unchanged.  This is unexpected since on error it should
return -1 and set errno to one of the error values listed for mkdir(2).

This commit sets errno = ENOENT for this NULL ptr case.  This is in
accordance with the errors specified by mkdir(2):

  ENOENT
  A component of the path prefix does not exist or is a null pathname.

Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2248
2014-04-09 13:32:22 -07:00
Richard Yao
8959b29e31 Assert alignment in umem_alloc_aligned
Valgrind suggests that the address we are returning is not properly
aligned, so lets add an assertion.

==87740==  Address 0x1012a22a is 554 bytes inside a block of size 4,096
alloc'd
==87740==    at 0x4C2BBA0: memalign (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==87740==    by 0x4C2BCC7: posix_memalign (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==87740==    by 0x52FA845: zio_buf_alloc (umem.h:101)
==87740==    by 0x52F6226: zil_alloc_lwb (zil.c:463)
==87740==    by 0x52F8559: zil_commit (zil.c:566)
==87740==    by 0x40611D: ztest_freeze (ztest.c:5909)
==87740==    by 0x4066A7: ztest_init (ztest.c:6048)
==87740==    by 0x407AF4: main (ztest.c:6226)

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2174
2014-03-20 12:01:37 -07:00
Brian Behlendorf
d7ec8d4fd9 Define the needed ISA types for Sparc
Add the minimum required ISA types to support the Sparc
architecture.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: marku89 <mar42@kola.li>
Issue #1700
2014-01-09 15:49:59 -08:00
Matthew Thode
11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Michael Kjorling
d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
renelson
a5f3665168 Handle acl flags from util-linux mount command
Add acl, noacl and posixacl to option_map, avoiding ENOENT error
case when mount from util-linux-2.24 execs mount.zfs with any of
those flags

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: renelson <bnelson@nelsonbe.com>
Issue #1968
2013-12-18 16:46:20 -08:00
Tim Chase
fd4f76160c Handle concurrent snapshot automounts failing due to EBUSY.
In the current snapshot automount implementation, it is possible for
multiple mounts to attempted concurrently.  Only one of the mounts will
succeed and the other will fail.  The failed mounts will cause an EREMOTE
to be propagated back to the application.

This commit works around the problem by adding a new exit status,
MOUNT_BUSY to the mount.zfs program which is used when the underlying
mount(2) call returns EBUSY.  The zfs code detects this condition and
treats it as if the mount had succeeded.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1819
2013-11-08 10:45:14 -08:00
Adam Leventhal
63fd3c6cfd Illumos #3582, #3584
3582 zfs_delay() should support a variable resolution
3584 DTrace sdt probes for ZFS txg states

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
    https://www.illumos.org/issues/3582
    illumos/illumos-gate@0689f76

Ported by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 10:55:25 -08:00
Brian Behlendorf
76463d4026 Revert "Add txgs-<pool> kstat file"
This reverts commit e95853a331.
2013-10-25 13:57:25 -07:00
Richard Yao
31fc19399e Generate libraries with correct DT_NEEDED entries
Libraries that depend on other libraries should list them in ELF's
DT_NEEDED field so that programs linking to them do not need to specify
those libraries unless they depend on them as well. This is not the case
in the current code and the consequence is that anything that needs a
library must know its dependencies. This is fragile and caused GRUB2's
configure script to break when a dependency was added on libblkid in
libzfs.

This resolves that problem by using LIBADD/LDADD to specify libraries in
Makefile.am instead of LDFLAGS. This ensures that proper DT_NEEDED
entries are generated and prevents GRUB2's configure script from
breaking in the presence of a libblkid dependency. This also removes
unneeded dependencies from various files.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
2013-10-10 16:56:51 -07:00