Commit Graph

3684 Commits

Author SHA1 Message Date
Rafal Jaworowski
c7b4433263 Initial gdbserver support for ARM.
Obtained from:	Juniper Networks, Semihalf
2008-11-17 16:32:57 +00:00
David E. O'Brien
ee81baecd8 Document what the sed trick is for.
Remove an embedded <TAB>, and use same style for both files.
2008-10-16 18:09:27 +00:00
Dag-Erling Smørgrav
ba377f119f Enable UTF-8.
MFC after:	1 week
2008-10-08 13:16:20 +00:00
John Baldwin
27f38446be Oops, initialize sections and sections_end to NULL.
Submitted by:	Navdeep Parhar
MFC after:	1 week
2008-10-02 20:42:10 +00:00
Marcel Moolenaar
5f85c2cdd9 Revert previous commit. The prototype has been moved to unistd.h 2008-09-28 19:17:54 +00:00
Konstantin Belousov
42003afced Differentiate between interrupt frames, trap interrupt frames and timer
frame in the kgdb, to allow it to properly backtrace over the interrupt
stacks.

Noted and reviewed by:	tegge
Tested by:	pho
MFC after:	1 week
2008-09-27 15:58:37 +00:00
Marcel Moolenaar
3e5dafac90 Add -D_OSRELDATE_H to CFLAGS to prevent the declaration of
getosreldate() in assembler source files. We still get the
definition of __FreeBSD_version this way, because it's
outside the standard multiple-inclusion protection trick.

All this is specific to ia64.
2008-09-26 15:00:18 +00:00
John Baldwin
59c47d99be Use existing GDB routines for parsing the section table of klds in
the 'add-kld' command instead of doing it more by hand.

MFC after:	1 week
2008-09-25 19:32:03 +00:00
Sam Leffler
690f477d75 add new build knobs and jigger some existing controls to improve
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd

Reviewed by:	various (posted to arch)
MFC after:	1 month
2008-09-21 22:02:26 +00:00
Warner Losh
ca7da4c058 MFP4: Add mips to the list of soft-float platforms. 2008-09-19 03:09:36 +00:00
Warner Losh
608a4df923 mfp4: sort the architectures alphabetically... 2008-09-19 02:30:22 +00:00
Warner Losh
bfb4b856d3 Prefer the patch in p4 to the patch in svn as it properly sorts the
architectures alphabetically.
2008-09-19 01:35:34 +00:00
Marcel Moolenaar
93898f2b2d Widen psaddr_t from uintptr_t to uint64_t. This results in an
ABI change on ILP32 platforms and relating to events.  However
it's harmless on little-endian ILP32 platforms in the sense
that it doesn't cause breakages.  Old ILP32 thread libraries
write a 32-bit th_p and new thread libraries write a 64-bit
th_p.  But due to the fact that we have an unused 32-bit data
field right after th_p and that field is always initialized to
zero, little-endian ILP32 machines effectively have a valid
64-bit th_p by accident. Likewise for new thread libraries and
old libthread_db: little endian ILP32 is unaffected.

At this time we don't support big-endian threaded applications
in GDB, so the breakage for the ILP32 case goes unnoticed.
2008-09-14 16:52:42 +00:00
David E. O'Brien
4bdc01a9f9 Add FreeBSD/MIPS support to GCC. 2008-09-01 18:46:03 +00:00
David E. O'Brien
5555bfc259 GDB isn't building on MIPS. Temporarily disable, to revisit soon. 2008-09-01 18:18:19 +00:00
David E. O'Brien
9dec52bfb2 Turn cc_tools/Makefile and Makefile.tgt into a "linear" read. Shared
parts of the configuration aren't duplicated, and arch-specific exceptions
are made "in-place".  Also clean up the FreeBSD/amd64 config a little.
2008-08-31 23:38:28 +00:00
Rui Paulo
a9435ff4dd Enable EFI target.
While there, make use of the DEFAULT_VECTOR variable.
2008-08-31 09:17:27 +00:00
Doug Rabson
8f55a568f6 Add an implementation of the RPCSEC_GSS authentication protocol for RPC. This
is based on an old implementation from the University of Michigan with lots of
changes and fixes by me and the addition of a Solaris-compatible API.

Sponsored by:	Isilon Systems
Reviewed by:	alfred
2008-08-06 14:02:05 +00:00
Olivier Houchard
7aab344dc1 Unbreak the arm build, by spelling LIBSRCS correctly. 2008-08-02 12:33:39 +00:00
Olivier Houchard
21fb986f16 Do not build fbsd-threads.c if we're building a cross-debugger.
MFC after:	3 days
2008-08-02 01:21:04 +00:00
Peter Wemm
c6acfe86c7 Merge gnu cpio 2.6 -> 2.8 changes. Unfortunately, we have massive
conflicts due to radically different approaches to security and bug fixes.
In some cases I re-started from the vendor version and reimplemented our
patches.  Fortunately, this is not enabled by default in -current.
2008-07-10 02:08:00 +00:00
David E. O'Brien
3c46f7891b Instead of using .POSIX:, use the cool looking "@:" rule.
Submitted by:	ru
2008-06-27 14:59:23 +00:00
Ruslan Ermilov
042df2e2da Enable GCC stack protection (aka Propolice) for userland:
- It is opt-out for now so as to give it maximum testing, but it may be
  turned opt-in for stable branches depending on the consensus.  You
  can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
  It is harmless to steal the knob as SSP symbols have been provided
  by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
  (sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
  libc will be automatically downgraded to -fstack-protector because it
  breaks rtld otherwise.
- This option is unavailable on ia64.

Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.

Submitted by:	Jeremie Le Hen <jeremie@le-hen.org>
2008-06-25 21:33:28 +00:00
John Baldwin
ad335b4edf Catch up to recentish kgdb changes:
- Use ptid_get_pid() rather than ptid_get_tid() (part of the changes to
  let 'tid' work for remote kgdb).
- Add a stub kgdb_trgt_new_objfile() hook.

Silence from:	obrien, mips@
2008-06-18 14:23:28 +00:00
Alexander Kabaev
8fecbb4e34 Install extra include files that were forgotten in original GCC 4.2.x
import changes.

PR: 124647
Submitted by: Vlad GALU
MFC after: 2 days
2008-06-16 22:49:30 +00:00
Doug Barton
6973701a00 1. Make the BSD version of cpio the default [1]
a. The BSD version will be built and installed unless
WITHOUT_BSD_CPIO is defined.
b. The GNU version will not be built or installed unless
WITH_GNU_CPIO is defined. If this is defined, the symlink
in /usr/bin will be to the GNU version whether the BSD
version is present or not.

When these changes are MFCed the defaults should be flipped.

2. Add a knob to disable the building of GNU grep. This will
make it easier for those that want to test the BSD version in
the ports.

Approved by:	kientzle [1]
2008-06-16 05:48:15 +00:00
Tim Kientzle
e761102df3 Install GNU cpio as 'gcpio', symlink to 'cpio' unless WITH_BSDCPIO is
defined.
2008-05-26 17:21:12 +00:00
David E. O'Brien
486b0cc401 Add Juniper's copyright. 2008-05-20 22:58:47 +00:00
David E. O'Brien
aa4a28bd31 MIPS arch target kgdb(1) support.
Obtained from: Juniper Networks.
2008-05-20 22:54:42 +00:00
Ruslan Ermilov
d0010c62b2 Add support for bzip2-compressed manpages.
PR:		bin/120730
Submitted by:	ighighi AT gmail DOT com
MFC after:	1 week
2008-05-14 17:18:12 +00:00
Ruslan Ermilov
6ccf134528 Add an ability to run man(1) on local files (the argument should
contain a `/' character); based on the submission in the PR.

PR:		bin/120730
MFC after:	1 week
2008-05-14 17:08:31 +00:00
John Baldwin
084bc6a480 Trim unneeded header. 2008-05-09 19:00:40 +00:00
Doug Rabson
33f1219925 Fix conflicts after heimdal-1.1 import and add build infrastructure. Import
all non-style changes made by heimdal to our own libgssapi.
2008-05-07 13:53:12 +00:00
John Baldwin
774bd9bf03 Go back to fondling FILE internals. 2008-05-05 16:12:28 +00:00
Marcel Moolenaar
4655d57927 Lower WARNS to avoid warning about type-punned casting. 2008-05-04 04:13:35 +00:00
Marcel Moolenaar
0aca787a7b Unbreak build: gnu sort has been configured to grope inside struct
__sFILE. It's opaque now, so add a function that returns the pending
output bytes.

Pointy hat: jhb
2008-05-03 23:36:00 +00:00
Oleksandr Tymoshenko
36da6811b7 Add MIPS to the list of "no TLS" architectures.
Approved by:	cognet (mentor)
2008-05-03 21:24:28 +00:00
John Baldwin
53df73db45 - Change how the vmcore target maps FreeBSD thread IDs to GDB ptids. We
now only use the TID and ignore the PID and use pid_to_ptid() to build a
  ptid treating the TID as a PID.  The benefit of this is that the vmcore
  target now uses the same scheme as GDB's remote targets.  As a result,
  the 'tid' command now works for remote targets (however, it only accepts
  TIDs and not addresses of 'struct thread' objects).
- Use gdb_thread_select() to do the actual thread switch for the 'tid' and
  'proc' commands.  This now gives the same UI feedback when switching
  threads as the GDB 'thread' command rather than providing no visual
  output at all.

MFC after:	1 week
2008-05-01 20:36:48 +00:00
John Baldwin
3461a0f244 Rework how kgdb manages kernel and vmcore files to be a bit more gdb-ish
so that kgdb can be used more like a normal gdb:
- Load the kernel via the standard 'exec' target and allow it to be changed
  via the 'file' command.
  - Instead of explicitly loading the kernel file as the mail symbol file
    during startup, just pass it to gdb_main() as the executable file.
  - Change the kld support (via shared libraries) to cache the address of
    the linker_files and linker_kernel_file variables in addition to the
    offsets of various members in 'struct linker_file'.
  - When a new symbol file is loaded, recompute the addresses and offsets
    used by the kld support code.
  - When a new symbol file is loaded, recalculate the ofs_fix variable to
    account for the different ways a trapframe can be passed to trap
    frame handlers in i386.  This is done by adding a MD
    kgdb_trgt_new_objfile() hook that is empty on all but i386.
  - Don't use the directory name of the kernel specified on the command
    line to find kernel modules in the kld support code.  Instead,
    extract the filename of the current executable via exec_bfd.  Now
    the 'kernel' variable is private to main.c again.
  - Make the 'add-kld' command explicitly fail if no executable is loaded.
- Make the support for vmcores a real core-dump target that opens the
  kernel and vmcore on open and closes the kvm connection when closed, etc.
  - The 'core' command can now be used to select a vmcore to use, either
    a crash dump file or /dev/mem for live debugging.
  - The 'detach' command can be used to detach from a vmcore w/o attaching
    to a new one.
  - kgdb no longer explicitly opens a core dump during startup and no longer
    has to use an atexit() hook to close the kvm connection on shutdown.
  - Symbols for kld's are automatically loaded anytime a core is opened.
    Also, the unread portion of dmesg is dumped just as it was done on kgdb
    startup previously.
- Don't require either a remote target or core dump if a kernel is specified.
  You can now just run 'kgdb kernel' similar to running gdb on an executable
  and later connect to a remote target or core dump.
- Use a more relaxed way to verify remote targets specified via -r.
  Instead of explicitly allowing a few non-file target specifications,
  just assume that if stat() on the arg and on "/dev/" + arg both fail
  that is some non-file target and pass it to gdb.
- Don't use a custom interpreter.  The existing kgdb_init() hook and the
  target_new_objfile() hook give us sufficient hooks during startup to
  setup kgdb-specific behavior now.
- Always add the 'proc', 'tid', and 'add-kld' commands on startup and not
  just if we have a core dump.  Currently the 'proc' and 'tid' commands do
  not work for remote targets (I will fix at least 'tid' in the next round
  of changes though).  However, the 'add-kld' command works fine for
  loading symbols for a kernel module on a remote target.
- Always setup the 'kld' shared library target operations instead of just
  if we have a core dump.  Although symbols for kernel modules are not
  automatically loaded when connecting to a remote target, you can do
  'info sharedlibrary' after connecting to the remote target and kgdb will
  find all the modules.  You can then use the 'sharedlibrary' command to
  load symbols from the module files.
- Change kthr_init() to free the existing list of kthr objects before
  generating a new one.  This allows it to be invoked multiple times
  w/o leaking memory.

MFC after:	1 week
2008-04-29 20:32:45 +00:00
John Baldwin
624e4d168d - Add a global variable 'fbsdcoreops_suppress_target' that can be set to
force the FreeBSD multithreaded core target to not register any target
  for handling core dumps.  This is analogous to the
  'coreops_suppress_target' variable that GDB provides for suppressing the
  default core dump target.  KGDB will use this new variable so it can
  provide its own core dump target that uses libkvm to work with vmcore
  files.
- Adjust the long name and documentation of the FreeBSD multithreaded core
  dump target so it better matches what GDB's core dump target uses.

MFC after:	1 week
Reviewed by:	davidxu, marcel
2008-04-29 17:47:25 +00:00
John Baldwin
34f36b232b Use kgdb_parse() instead of libkvm(3) to read the first instruction from
"calltrap" to see which method is used to pass trap frames.  This seg
faulted on remote gdb connections (where libkvm isn't used).

MFC after:	3 days
2008-04-28 18:27:19 +00:00
John Baldwin
064e8b005f Remove the 'add_kld_command' arg from load_kld(). It is always true since
the auto-loading of kld's switched to hooking into gdb's shared library
support.

MFC after:	1 week
2008-04-28 15:26:11 +00:00
Warner Losh
2fd1934152 FreeBSD/mips gdb build suspport. From the mips2-jnpr branch. 2008-04-26 12:22:46 +00:00
Mark Linimon
f26fc231ff Add 'arm' category.
Approved by:	peter
2008-04-23 03:05:31 +00:00
Marcel Moolenaar
468390dffd Add support for the 32-bit EFI target. 2008-04-17 23:36:35 +00:00
John Baldwin
36cc36a0ec Change kgdb_parse() to use wrapped versions of parse_expression() and
evaluate_expression() so that any errors are caught and cause the function
to return to 0.  Otherwise the errors posted an exception (via longjmp())
that aborted the current operation.  This fixes the kld handling for
older kernels (6.x and 7.x) that don't have the full pathname stored in
the kernel linker.

MFC after:	3 days
2008-03-29 17:46:03 +00:00
John Baldwin
ec922be302 Initialize the head pointer in kld_current_sos() to NULL to avoid returning
a junk pointer and possibly causing a seg fault if we don't have any
non-kernel klds (or are unable to walk the list due to core / kernel
mismatch).

MFC after:	1 week
2008-03-29 03:48:06 +00:00
David E. O'Brien
079e465705 Re-enable the CVS build. 2008-03-19 15:21:44 +00:00
David E. O'Brien
d103b84809 Update for version 1.11-20080310.
Make our changes to CVS_RSH & CVS_SSH settings here instead of
  contrib/cvs/src/cvs.h.
2008-03-19 15:19:42 +00:00
David E. O'Brien
a060e0f4ed + Make it clear this was taken from the CVS 1.11 branch on 10-March-2008.
+ Depend on $CVSDIR/configure also - so things get properly remade if we tweak.
2008-03-19 15:18:03 +00:00