This was inherited from iwlwifi, which drives devices supported by both
iwn(4) and iwm(4) in FreeBSD. In iwm(4) _mvm is meaningless, so remove
it. OpenBSD made the same change a long time ago. No functional change
intended.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is the multiqueue receive code required for 9000-series chips.
Note that we still only configure a single RX queue for now. Multiqueue
support will require MSI-X configuration and a scheme for managing a
global pool of RX buffers.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.
- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.
Tested with Netgear WG111 v3 (urtw(4)), STA mode.
MFC after: 2 weeks
* This hopefully avoids some firmware panics, I was occasionally seeing,
when iwm disconnects upon losing signal to an access point at some point.
* This is synchronizing the if_iwm_time_event.c file a bit more from the
corresponding Linux iwlwifi/mvm/time-event.c.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8cb71584a6a72232c13151d60e57f7f229220eb)
* This is a mix of the OpenBSD Git 7fd9664469d1b717a307eebd74aeececbd3c41cc
change, and syncing with the Linux iwlwifi code.
Taken-From: Linux iwlwifi, and OpenBSD
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (706a3044afd27c3fecfdf57bec1695310e53e228)
* This avoids firmware resets in all the cases in iwm_newstate(). Instead
iwm_bring_down_firmware() is called, which tears down all the STA
connection state, according to the sc->sc_firmware_state value.
* Improve the behaviour of the LED blinking a bit, so it only blinks when
there really is a wireless scan going on.
* Print the newstate arg in debug output of iwm_newstate(), to help in
debugging.
This is inspired by the firmware state maintaining change in OpenBSD's iwm,
by stsp@openbsd.org (OpenBSD Git 0ddb056fb7370664b1d4b84392697cb17d1a414a).
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (8a41b10ac639d0609878696808387a6799d39b57)
* Rename some structs and struct members for firmware handling.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (4b1006a6e4d0f61d48c67b46e1f791e30837db67)
* We should load the firmware exactly once before the driver really
initializes the hardware the first time, and unload it at detach time.
There is no need to retrieve the firmware during execution of
iwm_mvm_load_ucode_wait_alive(), we should make sure we already have the
firmware data at hand before that.
* The existing sc_preinit_hook code fails to deal with the case where
if_iwm is loaded by the loader (or is statically linked) and the
firmware needs to be loaded from disk. So we can just call
iwm_read_firmware() from iwm_attach() directly.
* A separate solution will have to be added to properly defer the firmware
loading during bootup, until the necessary filesystem is mounted.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (0104ee1f4cb6a2313c00c2526c6ae98d42e5041d)
* Rather than providing a non-zero index into the firmware RS table,
we should always use index 0 and update the firmware RS table whenever
our chosen tx rate for data-frames changes.
* Send IWM_LQ_CMD updates when the tx rate gets updated by the net80211
rate control (which is after we tell the tx status to the net80211
rate-control in iwm_mvm_rx_tx_cmd_single()).
* Disregard frames transferred with a different tx rate than the currently
selected rate for the rate-control calculations. This way we avoid
counting management frames (which are sent at a slow, and fixed rate),
as well as frames we added to the tx queue just before a new IWM_LQ_CMD
update took effect.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (5d6b465e288ac5b52d7115688d4e6516acbbea1c)
* LAR can be disabled with the hw.iwm.lar.disable tunable now.
* On Family 8000 devices we need to check the lar_enabled flag from
nvm_data in addition to the TLV_CAPA_LAR_SUPPORT flag from the firmware.
* Add a separate IWM_DEBUG_LAR debugging flag.
Obtained from: dragonflybsd.git 0593e39cb295aa996ecf789ed4990c3b255f1770
* This change also fixes a possible issue in the existing smart-fifo code,
which set the IWM_SF_CFG_DUMMY_NOTIF_OFF bit on AC8260 chipsets, although
that's only used in iwlwifi for Family 8000 chipsets connected via SDIO
interface.
Obtained from: Dragonflybsd.git cb650b01526b0aeef3c4307d926e7f1428997d50
* Add a per-vap ps_disabled flag, and use it for a workaround which fixes
an association issue when powersaving is enabled.
* Compute flag that should correpsond to the mvmif->bss_conf.ps flag in
Linux's iwlwifi (e.g. this disallows powersaving when not associated
yet).
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git dc2e69bdfe8c9d7049c8a28da0adffbfbc6de5c0
* Inspired by iwn(4) and Linux iwlwifi.
* Read wme parameters into a buffer within struct iwm_vap in
iwm_wme_update().
* If we aren't associated yet, the new settings will soon be sent
by iwm_mvm_mac_ctxt_changed() during association.
* If we are already associated, explicitly call iwm_mvm_mac_ctxt_changed()
from iwm_wme_update() to send the new settings to the firmware.
* Change iwm_mvm_ac_to_tx_fifo mapping, to fit the freebsd net80211
WME stream class numbering, instead of Linux's enum ieee80211_ac_numbers.
Obtained from: dragonflybsd.git b8bd6cd746d1f45e616ccfcbeed06dfe452a1108
* Factor out iwm_handle_rxb() function from iwm_notif_intr().
* Removing the IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK flag allows
the device to put multiple frames (both command responses and 80211
frames) into a single RX buffer.
* Uses m_copym() to split up the receive buffers when multiple 80211
frames are received in one RX buffer. The effect is basically the same
as when using m_split(), but we want to keep the original mbuf around
when calling iwm_mvm_rx_rx_mpdu() to make error handling a bit easier
for now.
* Contains a small optimization to avoid the m_copym() when only a single
80211 frame is received in one RX buffer (i.e. matching the existing
behaviour).
Obtained from: dragonflybsd.git b5eb43f0280bbcfd26af51cf5a4b8e8ff3590b67
* Store macid and color values in struct iwm_vap, to avoid hardcoded
constants a bit.
* Add iwm_mvm_binding_remove_vif() function (will be used in disconnecting
from an access point without resetting the whole device).
* Not adding code from Linux iwlwifi yet, to handle one PHY context to
be bound to several VAPs/virtual-interfaces, it's definitely not needed
in the near future.
Obtained from: dragonflybsd.git f16ef74977e51e1bfc7a625dd18b98b02158e0e5
* The DEVICE_POWER_FLAGS_CAM_MSK flag was removed in the upstream iwlwifi
in Linux commit ceef91c89480dd18bb3ac51e91280a233d0ca41f.
* Add sc_ps_disabled flag to struct iwm_softc, which corresponds to
mvm->ps_disabled in struct iwl_mvm in Linux iwlwifi.
* Adds a hw.iwm.power_scheme tunable which corresponds to the power_scheme
module parameter in Linux iwlwifi. Set this to 1 for completely
disabling power management, 2 (default) for balanced powermanagement,
and 3 for lowerpower mode (which does dtim period skipping).
* Imports the constants.h file from iwlwifi as if_iwm_constants.h.
* This doesn't allow changing the powermanagement setting while connected,
also one can only choose between enabled and disabled powersaving with
ifconfig (so switching between balanced and low-power mode requires
rebooting to change the tunable).
* After any changes to powermanagement (i.e. "ifconfig wlan0 powersave" to
enable powermanagement, or "ifconfig wlan0 -powersave" for disabling
powermanagement), one has to disconnect and reconnect to the accespoint
for the change to take effect.
Obtained from: dragonflybsd.git d7002a7990d077c92585978ea998474af50f91e0
This can significantly reduce scan duration thus saving time and power.
EBS failure reported by FW disables EBS for current connection. It is
re-enabled upon new connection attempt on any WLAN interface.
Obtained from: dragonflybsd.git 89f579e9823a5c446ca172cf82bbc210d6a054a4
* Uses the IWM_FW_PAGING_BLOCK_CMD firmware command to tell the firmware
what memory ranges to use for paging.
Obtained from: dragonflybsd.git 8a5b199964f8e7bdb00039f0b48817a01b402f18
* This is more similar to how code/definitions are distributed in
Linux's iwlwifi.
* This should make recognizing new chipset variants, and adding additional
flags from the Linux iwlwifi code easier, without blowing up if_iwm.c
Obtained from: dragonflybsd.git 27d11320e707d2c41424efc1983762f6799941d6
* Use the notification wait API, like it's done in the Linux iwlwifi code,
to wait for the IWM_MVM_ALIVE notification.
* This also should fix some firmware load interrupt issues, and errors
in the nic lock using.
Tested:
* (adrian) Intel 7260, STA mode
Obtained from: dragonflybsd.git a7697ea01c11fd493aec52260a02f31df680eb91
* While there, rename some functions to match the names and functionality
of the similarly named functions in Linux iwlwifi.
Obtained from: dragonflybsd.git e98ee77a816bfd8b4912047b93dfb2c560788f24
* Add iwm_pcie_set_cmd_in_flight() and iwm_pcie_clear_cmd_in_flight()
helper methods.
* Use ring->queued tracking in the command queue to set/clear the
cmd_hold_nic_awake bit at the right points.
Taken-From: Linux iwlwifi
Obtained from: DragonflyBSD commit ce43f57f5308b579ea21e8a5a29969114ba2247d
* Add IWM_FLAG_SCAN_RUNNING to sc->sc_flags to track whether the firmware
is currently running a scan, in order to decide wheter iwm_scan_end
needs to abort a running scan.
* In iwm_scan_end, if the scan is still running, we now abort it, in order
to keep the firmware scanning state in sync.
* Try to make things a bit simpler, by reacting on the
IWM_SCAN_OFFLOAD_COMPLETE and IWM_SCAN_COMPLETE_UMAC notifications,
instead of IWM_SCAN_ITERATION_COMPLETE and
IWM_SCAN_ITERATION_COMPLETE_UMAC. This should be fine since we always
only tell the firmware to do a single scan iteration anyway.
Obtained from: DragonflyBSD commit 1f249c981c4e89e7cde1836a75b61cac36dc7ac5
* This fixes the phy_cfg field sent in the iwm_send_phy_cfg_cmd()
command, which wasn't taking into account the valid_rx_ant and
valid_tx_ant masks from nvm_data before.
Tested:
* 7260, STA mode, 2G and 5G
Obtained from: DragonflyBSD commit cbb82693c18fd71b4eb86855b82d03995f352d65
* This makes it a bit easier to factor out common parts for e.g. the
7000 chipset family.
* Add iwm7265d config, and recognize the 7265D chipset variant via the
hardware revision.
Tested:
* 7260, STA mode (2ghz)
Obtained from: Dragonflybsd commit cc8d6ccf5583fd45964f3bde9b057ee4f834c0e0
* sc->sc_nvm becomes sc->nvm_data and is now a pointer instead of an
inlined struct.
* Add sc->eeprom_size and sc->nvm_hw_section_num configuration values to
struct iwm_softc.
* For now continue to avoid negative error return-values, and use pointer
variables for some return values, as before.
* Continue to omit LAR (location aware regulatory) related code as well.
Tested:
* Intel 7260, STA mode (2GHz)
Obtained from: dragonflybsd commit 39f8331b1a6f295291e08c377da12a8e7a5436c0
Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl_tx_stats for *_tx_update();
While here, improve amrr_tx_update() for a bit:
1. In case, if receiver is not known (typical for Ralink USB drivers),
refresh Tx rate for all nodes on the interface.
2. There was a misuse:
- otus(4) sends non-decreasing counters (as originally intended);
- but ural(4), rum(4) and run(4) are using 'read & clear' registers
to obtain statistics for some period of time (and those 'last period'
values are used as arguments for tx_update()). If arguments are not big
enough, they are just discarded after the next call.
Fix: move counting into *_tx_update()
(now otus(4) will zero out all node counters after every tx_update() call)
Tested with:
- Intel 3945BG (wpi(4)), STA mode.
- WUSB54GC (rum(4)), STA / HOSTAP mode.
- RTL8188EU (urtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8037
* No functional change, none of these values were ever read.
* The values removed from struct iwm_nvm_data are only used for old dvm
devices in Linux iwlwifi, and irrelevant to iwm hence.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7945
The wantresp field in struct iwm_rx_data has never been used for anything,
so we can just delete it.
Apparently struct iwm_sf_cfg_cmd was compiled correctly (using a 32bit
value to represent the enum), but it still seems like a very bad idea to use
an enum type in a __packed struct.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7930
When allocating a new mbuf or bus_dmamap_load()-ing it fails,
we can just keep the old mbuf since we are dropping that packet anyway.
Instead of doing bus_dmamap_create() and bus_dmamap_destroy() all the time,
create an extra bus_dmamap_t which we can use to safely try
bus_dmamap_load()-ing the new mbuf. On success we just swap the spare
bus_dmamap_t with the data->map of that ring entry.
Tested:
Tested with Intel AC7260, verified with vmstat -m that new kernel no
longer visibly leaks memory from the M_DEVBUF malloc type.
Before, leakage was 1KB every few seconds while ping(8)-ing over the wlan
connection.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re@
Obtained from: DragonflyBSD.git cc440b26818b5dfdd9af504d71c1b0e6522b53ef
Differential Revision: https://reviews.freebsd.org/D6742
if_iwm - GC some dead code, left by a partially applied OpenBSD change.
Taken-From: OpenBSD (if_iwm.c r1.69)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD git 07dfed32ea39b980b0b80d27ff938e7c3ca4c0b5
