Commit Graph

145 Commits

Author SHA1 Message Date
Rebecca Cran
6d79f3f6ae Fix more continuous/contiguous typos (cf. r215955) 2010-11-27 21:51:39 +00:00
Attilio Rao
5f6bf4518d IP_BINDANY is not correctly handled in getsockopt() case.
Fix it by specifying the correct bits.

Sponsored by:	Sandvine Incorporated
Reviewed by:	bz, emaste, rstone
Obtained from:	Sandvine Incorporated
MFC after:	10 days
2010-09-24 14:38:54 +00:00
Kip Macy
1f93b77267 try working around panic by validating rt and lle
MFC after:	3 days
2010-05-12 03:29:11 +00:00
Kip Macy
77931dd513 Add flowtable support to IPv6
Tested by: qingli@

Reviewed by:	qingli@
MFC after:	3 days
2010-05-09 20:32:00 +00:00
Randall Stewart
1966e5b5a1 The proper fix for the delayed SCTP checksum is to
have the delayed function take an argument as to the offset
to the SCTP header. This allows it to work for V4 and V6.
This of course means changing all callers of the function
to either pass the header len, if they have it, or create
it (ip_hl << 2 or sizeof(ip6_hdr)).
PR:		144529
MFC after:	2 weeks
2010-03-12 22:58:52 +00:00
Randall Stewart
9b03990a13 With the recent change of the sctp checksum to support offload,
no delayed checksum was added to the ip6 output code. This
causes cards that do not support SCTP checksum offload to
have SCTP packets that are IPv6 NOT have the sctp checksum
performed. Thus you could not communicate with a peer. This
adds the missing bits to make the checksum happen for these cards.

PR:		144529
MFC after:	2 weeks
2010-03-12 08:10:30 +00:00
Julian Elischer
0b4b0b0fee Virtualize the pfil hooks so that different jails may chose different
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.

Sitting aroung in tree waiting to commit for: 2 months
MFC after:	2 months
2009-10-11 05:59:43 +00:00
Qing Li
9452b0d2de This patch fixes the following issues:
- Interface link-local address is not reachable within the
  node that owns the interface, this is due to the mismatch
  in address scope as the result of the installed interface
  address loopback route. Therefore for each interface
  address loopback route, the rt_gateway field (of AF_LINK
  type) will be used to track which interface a given
  address belongs to. This will aid the address source to
  use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
  the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
  only for validation reason. Doing so will eliminate as much
  of the special case (loopback addresses) handling code
  as possible, however, these empty nd6 entries should not
  be returned to the userland applications such as the
  "ndp" command.
Since both of the above issues contain common files, these
files are committed together.

Reviewed by:	bz
MFC after:	immediately
2009-09-05 16:43:16 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Robert Watson
8c0fec805f Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references.  The following routines now return references:

  ifaddr_byindex
  ifa_ifwithaddr
  ifa_ifwithbroadaddr
  ifa_ifwithdstaddr
  ifa_ifwithnet
  ifaof_ifpforaddr
  ifa_ifwithroute
  ifa_ifwithroute_fib
  rt_getifa
  rt_getifa_fib
  IFP_TO_IA
  ip_rtaddr
  in6_ifawithifp
  in6ifa_ifpforlinklocal
  in6ifa_ifpwithaddr
  in6_ifadd
  carp_iamatch6
  ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

  IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc).  In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit.  Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by:	bz
Obtained from:	Apple, Inc. (portions)
MFC after:	6 weeks (portions)
2009-06-23 20:19:09 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Pawel Jakub Dawidek
f44270e764 - Rename IP_NONLOCALOK IP socket option to IP_BINDANY, to be more consistent
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
  as there is no more space for more SOL_SOCKET options, but this option also
  fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
  functionality (currently only unjail root can use it).

Discussed with:	julian, adrian, jhb, rwatson, kmacy
2009-06-01 10:30:00 +00:00
Warner Losh
71ce264c94 Implement RFC 5095 more fully. Rather than marking this no-op code as
BURN_BRIDGES, just remove it.  Adjust comments.

Reviewed by:	dwhite, emaste, battlez
2009-05-09 18:25:58 +00:00
Bruce M Simpson
33cde13046 Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit:
import from p4 bms_netdev.  Summary of changes:

 * Connect netinet6/in6_mcast.c to build.
   The legacy KAME KPIs are mostly preserved.
 * Eliminate now dead code from ip6_output.c.
   Don't do mbuf bingo, we are not going to do RFC 2292 style
   CMSG tricks for multicast options as they are not required
   by any current IPv6 normative reference.
 * Refactor transports (UDP, raw_ip6) to do own mcast filtering.
   SCTP, TCP unaffected by this change.
 * Add ip6_msource, in6_msource structs to in6_var.h.
 * Hookup mld_ifinfo state to in6_ifextra, allocate from
   domifattach path.
 * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
   Kernel consumers which need this should use in6m_lookup().
 * Refactor IPv6 socket group memberships to use a vector (like IPv4).
 * Update ifmcstat(8) for IPv6 SSM.
 * Add witness lock order for IN6_MULTI_LOCK.
 * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
 * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
 * Update carp(4) for new IPv6 SSM KPIs.
 * Virtualize ip6_mrouter socket.
   Changes mostly localized to IPv6 MROUTING.
 * Don't do a local group lookup in MROUTING.
 * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
 * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
 * Bump __FreeBSD_version to 800084.
 * Update UPDATING.

NOTE WELL:
 * This code hasn't been tested against real MLDv2 queriers
   (yet), although the on-wire protocol has been verified in Wireshark.
 * There are a few unresolved issues in the socket layer APIs to
   do with scope ID propagation.
 * There is a LOR present in ip6_output()'s use of
   in6_setscope() which needs to be resolved. See comments in mld6.c.
   This is believed to be benign and can't be avoided for the moment
   without re-introducing an indirect netisr.

This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
Bjoern A. Zeeb
1263305f0c Start removing IPv6 Type 0 Routing header code.
RH0 was deprecated by RFC 5095.

While most of the code had been disabled by #if 0 already, leave a
bit of infrastructure for possible RH2 code and a log message under
BURN_BRIDGES in case a user still tries to send RH0 packets.

Reviewed by:	gnn (a bit back, earlier version)
2009-03-03 13:12:12 +00:00
Bjoern A. Zeeb
33553d6e99 For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
2009-02-27 14:12:05 +00:00
Bjoern A. Zeeb
97aa4a517a Try to remove/assimilate as much of formerly IPv4/6 specific
(duplicate) code in sys/netipsec/ipsec.c and fold it into
common, INET/6 independent functions.

The file local functions ipsec4_setspidx_inpcb() and
ipsec6_setspidx_inpcb() were 1:1 identical after the change
in r186528. Rename to ipsec_setspidx_inpcb() and remove the
duplicate.

Public functions ipsec[46]_get_policy() were 1:1 identical.
Remove one copy and merge in the factored out code from
ipsec_get_policy() into the other. The public function left
is now called ipsec_get_policy() and callers were adapted.

Public functions ipsec[46]_set_policy() were 1:1 identical.
Rename file local ipsec_set_policy() function to
ipsec_set_policy_internal().
Remove one copy of the public functions, rename the other
to ipsec_set_policy() and adapt callers.

Public functions ipsec[46]_hdrsiz() were logically identical
(ignoring one questionable assert in the v6 version).
Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(),
the public function to ipsec_hdrsiz(), remove the duplicate
copy and adapt the callers.
The v6 version had been unused anyway. Cleanup comments.

Public functions ipsec[46]_in_reject() were logically identical
apart from statistics. Move the common code into a file local
ipsec46_in_reject() leaving vimage+statistics in small AF specific
wrapper functions. Note: unfortunately we already have a public
ipsec_in_reject().

Reviewed by:	sam
Discussed with:	rwatson (renaming to *_internal)
MFC after:	26 days
X-MFC:		keep wrapper functions for public symbols?
2009-02-08 09:27:07 +00:00
Bjoern A. Zeeb
97590249ad Another step assimilating IPv[46] PCB code:
normalize IN6P_* compat flags usage to their equialent
INP_* counterpart.

Discussed with:	rwatson
Reviewed by:	rwatson
MFC after:	4 weeks
2008-12-17 13:00:18 +00:00
Bjoern A. Zeeb
dcdb4371ca Use inc_flags instead of the inc_isipv6 alias which so far
had been the only flag with random usage patterns.
Switch inc_flags to be used as a real bit field by using
INC_ISIPV6 with bitops to check for the 'isipv6' condition.

While here fix a place or two where in case of v4 inc_flags
were not properly initialized before.[1]

Found by:	rwatson during review [1]
Discussed with:	rwatson
Reviewed by:	rwatson
MFC after:	4 weeks
2008-12-17 12:52:34 +00:00
Bjoern A. Zeeb
fc384fa5d6 Another step assimilating IPv[46] PCB code - directly use
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().

Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.

Discussed with:	rwatson
Reviewed by:	rwatson (version before review requested changes)
MFC after:	4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Bjoern A. Zeeb
6f4da20196 Check that the mbuf len is positive (like we do in the v4 case).
Read the other way round this means that even with the checks
the m_len turned negative in some cases which led to panics.
The reason to my understanding seems to be that the checks are wrong
(also for v4) ignoring possible padding when checking cmsg_len or
padding after data when adjusting the mbuf.
Doing proper cheks seems to break applications like named so
further investigation and regression tests are needed.

PR:		kern/119123
Tested by:	Ashish Shukla  wahjava gmail.com
MFC after:	3 days
2008-10-15 19:24:18 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Robert Watson
cc29ac7d22 Marginally decomplicate set/getsockopt code in ip6_output.c by simply
using the passed arguments explicitly and unconditionally rather than
testing them and calling panic().  The result is the same but easier
to read.

MFC after:	3 days
2008-07-29 09:31:03 +00:00
Ruslan Ermilov
ea26d58729 Replaced the misleading uses of a historical artefact M_TRYWAIT with M_WAIT.
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.

Reviewed by:	arch

There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
2008-03-25 09:39:02 +00:00
Bjoern A. Zeeb
9e3bdede0f Correct IPsec behaviour with a 'use' level in SP but no SA available.
In that case return an continue processing the packet without IPsec.

PR:		121384
MFC after:	5 days
Reported by:	Cyrus Rahman (crahman gmail.com)
Tested by:	Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
Bjoern A. Zeeb
8cfbd2995b Correct reference counting on the SP for outgoing IPv6 IPsec connections.
PR:		121374
Reported by:	Cyrus Rahman (crahman gmail.com)
Tested by:	Cyrus Rahman (crahman gmail.com)
MFC after:	5 days
2008-03-14 11:55:04 +00:00
Bjoern A. Zeeb
41aa71dd3e Replace the function name in two identical printfs
by __func__, __LINE__ so we can distinguish them
when people report a problem.

PR:		121373
MFC after:	5 days
2008-03-14 11:09:11 +00:00
Bjoern A. Zeeb
c26fe973a3 Rather than passing around a cached 'priv', pass in an ucred to
ipsec*_set_policy and do the privilege check only if needed.

Try to assimilate both ip*_ctloutput code blocks calling ipsec*_set_policy.

Reviewed by:	rwatson
2008-02-02 14:11:31 +00:00
Bjoern A. Zeeb
79ba395267 Replace the last susers calls in netinet6/ with privilege checks.
Introduce a new privilege allowing to set certain IP header options
(hop-by-hop, routing headers).

Leave a few comments to be addressed later.

Reviewed by:	rwatson (older version, before addressing his comments)
2008-01-24 08:25:59 +00:00
David E. O'Brien
9233d8f3ad un-__P() 2008-01-08 19:08:58 +00:00
David E. O'Brien
b48287a32a Clean up VCS Ids. 2007-12-10 16:03:40 +00:00
Mike Makonnen
016fb9d9c7 Instead of manually freeing the packet options structure (and not even doing
a good job of it) in the copypktopts() function, just call ip6_clearpktopts()
directly. Otherwise, the callers of this function would end up freeing the
memory twice.

Reviewed by: jinmei
PR:	     kern/116360
2007-11-21 16:01:42 +00:00
Xin LI
2a463222be Space cleanup
Approved by:	re (rwatson)
2007-07-05 16:29:40 +00:00
Xin LI
1272577e22 ANSIfy[1] plus some style cleanup nearby.
Discussed with:	gnn, rwatson
Submitted by:	Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by:	re (rwatson)
2007-07-05 16:23:49 +00:00
George V. Neville-Neil
b2630c2934 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
George V. Neville-Neil
2cb64cb272 Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by:    bz
Approved by:    re
Supported by:   Secure Computing
2007-07-01 11:41:27 +00:00
Robert Watson
c2259ba44f Include priv.h to pick up suser(9) definitions, missed in an earlier
commit.

Warnings spotted by:	kris
2007-06-13 22:42:43 +00:00
Brooks Davis
43bc7a9c62 With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.
2006-08-04 21:27:40 +00:00
Max Laier
656faadcb8 Remove ip6fw. Since ipfw has full functional IPv6 support now and - in
contrast to ip6fw - is properly lockes, it is time to retire ip6fw.
2006-05-12 20:39:23 +00:00
Christian S.J. Peron
604afec496 Somewhat re-factor the read/write locking mechanism associated with the packet
filtering mechanisms to use the new rwlock(9) locking API:

- Drop the variables stored in the phil_head structure which were specific to
  conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
  macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
  of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
  hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
  PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
  hooks to be ran, and returns if not. This check is already performed by the
  IP stacks when they call:

        if (!PFIL_HOOKED(ph))
                goto skip_hooks;

- Drop in assertion which makes sure that the number of hooks never drops
  below 0 for good measure. This in theory should never happen, and if it
  does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
  the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
  API instead of our home rolled version
- Convert the inlined functions to macros

Reviewed by:	mlaier, andre, glebius
Thanks to:	jhb for the new locking API
2006-02-02 03:13:16 +00:00
Robert Watson
fc4c825847 When storing the results of malloc() in a pointer to a pointer, check
the pointer to a pointer for NULL, not the pointer for NULL.

Noticed by:	Coverity Prevent analysis tool
MFC after:	3 days
2006-01-14 00:09:41 +00:00
SUZUKI Shinsuke
743eee666f sync with KAME regarding NDP
- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month
2005-10-21 16:23:01 +00:00
SUZUKI Shinsuke
4ecbe3316a sync with KAME (renamed a macro IPV6_DADOUTPUT to IPV6_UNSPECSRC)
Obtained from: KAME
2005-10-21 15:45:13 +00:00
David E. O'Brien
7ba26d99d8 IPv6 was improperly defining its malloc type the same as IPv4 (M_IPMADDR,
M_IPMOPTS, M_MRTABLE).  Thus we had conflicting instantiations.
Create an IPv6-specific type to overcome this.
2005-09-07 10:11:49 +00:00
Andre Oppermann
e0aec68255 Use the correct mbuf type for MGET(). 2005-08-30 16:35:27 +00:00
Hajimu UMEMOTO
e770771a78 simplied the fix to FreeBSD-SA-04:06.ipv6. The previous one worried
too much even though we actually validate the parameters.  This code
also is more compatible with other *BSDs, which do copyin within
setsockopt().

Submitted by:	Keiichi SHIMA <keiichi__at__iijlab.net>
Reviewed by:	security-officer (nectar)
Obtained from:	KAME
2005-07-28 18:07:07 +00:00