When there is no ACPI redistributor sub-table in the MADT we need to
fall back to use the GICR base address from the GIC CPU interface
structure.
Handle this fallback when adding memory to the device and when counting
the number of redistributors.
PR: 251171
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27247
The former tries to dereference memory allocated by the latter. If counting
the redistributor fails it may try to dereference memory that was never
allocated.
Sponsored by: Innovate UK
The same driver works on both, allow the driver to attach to a GICv4
controller with the ACPI attachment.
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
This adds an arm64 iommu interface and a driver for Arm System Memory
Management Unit version 3.2 (ARM SMMU v3.2) specified in ARM IHI 0070C
document.
Hardware overview is provided in the header of smmu.c file.
The support is disabled by default. To enable add 'options IOMMU' to your
kernel configuration file.
The support was developed on Arm Neoverse N1 System Development Platform
(ARM N1SDP), kindly provided by ARM Ltd.
Currently, PCI-based devices and ACPI platforms are supported only.
The support was tested on IOMMU-enabled Marvell SATA controller,
Realtek Ethernet controller and a TI xHCI USB controller with a low to
medium load only.
Many thanks to Konstantin Belousov for help forming the generic IOMMU
framework that is vital for this project; to Andrew Turner for adding
IOMMU support to MSI interrupt code; to Mark Johnston for help with SMMU
page management; to John Baldwin for explaining various IOMMU bits.
Reviewed by: mmel
Relnotes: yes
Sponsored by: DARPA / AFRL
Sponsored by: Innovate UK (Digital Security by Design programme)
Differential Revision: https://reviews.freebsd.org/D24618
In r367327 generic_bs_sr_<n> were derived from mips. Given we are calling
generic_bs_w_<n> and no write directly, we do not have to do the address
calculations ourselves as eneric_bs_w_<n> will do a str val [bsh, offset].
All we actually have to do is increment offset.
MFC after: 3 days
Memory allocated by bus_dmamem_alloc will take into account any alignment
requirements of the CPU it's running on. Stop trying to bounce in this case
as there is no bounce zone allocated.
Reported by: manu, tuexen
Tested by: manu
Sponsored by: Innovate UK
Implement the bs_sr_<N> generic functions based on the generic
mips implementation calling the generic bs_w_<N> functions in a loop.
ral(4) (rt2860.c) panics in RAL_SET_REGION_4() because bs_sr_4()
is NULL. It seems ral(4) and ti(4) might be the only consumers of
these functions I could find quickly so keeping them in C rather than asm.
Reported by: Steve Wheeler (https://redmine.pfsense.org/issues/11021)
Reviewed by: mmel
MFC after: 3 days
The stage 2 arm64 page tables may need to start at a lower level. This
is because we may only be able to map a limited IPA range and trying
to use a full 4 levels will cause the CPU to fault in an unrecoverable
way.
To simplify the code we still allocate the full 4 levels, however level 0
will only ever be used to find the level 1 table used as the base. Handle
this by creating a dummy entry in the level 0 table to point to the level 1
table.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26066
VM_ALLOC_WAITOK and vm_page_unwire_noq(), have eliminated the need for
many of the #includes.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D27052
The multipage alignment requirements is incompatible with many aspects
of actual busdma code. Multi-page alignment requests are incompatible
with many aspects of current busdma code. Mainly with partially bounced
buffer segments and per-page loop in bus_dmamap_load_buffer(). Because
proper implementation would be a major restructuring of the code, add
the fix only for already known uses and do KASSERT for all other cases.
For this reason, bus_dmamap_load_buffer () should take the memory allocated
by bus_dmam_alloc () as one segment bypassing per page segmentation. We can
do this because it is guaranteed that the memory is physically continuous.
Reviewed by: bz
Tested by: imp, mv, daniel.engberg.lists_pyret.net, kjopek_gmail.com
Differential Revision: https://reviews.freebsd.org/D26735
function checks that the mutex lock is owned.
This fixes 'devctl disable re0' operation.
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26904
PCPU_GET(curpmap) expands to multiple instructions on arm64, and if the
current thread is migrated in between execution of those instructions, a
stale value may be used in the assertion condition.
Diagnosed by: mmel
Reported by: mmel, Bob Prohaska <fbsd@www.zefox.net>
Submitted by: alc
MFC after: 1 week
Linux execve() gets audited as AUE_EXECVE as well, we should also interpret
the return from this correctly for the same reasoning as in r367002.
MFC with: r367002
pagezero(). Ultimately, they use the same method for bulk zeroing, but
the generality of bzero() requires size and alignment checks that
pagezero() does not.
Eliminate an unnecessary #include.
Reviewed by: emaste, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26876
Use ELR register value instead of LR for PMC_TRAPFRAME_TO_PC macro since
it's the former that indicates PC if the interrupted execution thread.
This fixes a bug where pmcstat lost the leaf function of the call chain
and started with the second function in the chain.
Although this change is an improvement over the previous logic there is still
posibility for incomplete data: if the leaf function does not have stack
variables and does not call any other functions compiler would not generate
a stack frame for it and the FP value would point to the caller's frame, so
instead of the actual "caller1 -> caller2 -> leaf" chain only
"caller1 -> leaf" would be captured.
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
In the functions that copy between userspace and kernel space we check the
user space address is valid before performing the copy. These are mostly
identical within each type of function so create two macros to perform the
check.
Obtained from: CheriBSD
Sponsored by: Innovate UK
These were missed in the previous pass. The extensions (partially)
supported by this change are:
- ARMv8.2-FHM, Floating-point multiplication variant
- ARMv8.4-LSE, Large System Extensions
- ARMv8.4-DIT, Data Independent Timing instructions
Reviewed by: andrew, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26707
This brings these definitions in sync with the ARMv8.6 version of the
architecture reference manual.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26706
Hiding this feature behind RB_VERBOSE is gratuitous. The tunable is enough
to limit its use to only those who explicitly request it.
Suggested by: kevans
Ampere Altra in a dual socket configuration has 12 ITSes for the
12 PCIe root complexes. The NIRQ interrupts are statically split
between each child of the gic bus, so here we increase that
value. 16k is enough for
(#cpus * #its * max_pcie_bifurcation) LPIs + (#SPIs and #PPIs)
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D26766
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
These already use the load variant that simulates userspace access.
Remove the macros that enable normal loads and stores from userspace
as they are unneeded.
Sponsored by: Innovate UK
When trapping on a wrote access to a buffer the kernel has mapped as write
only we should only pass the VM_PROT_WRITE flag. Previously the call to
vm_fault_trap as the VM_PROT_READ flag was unexpected.
Reported by: manu
Sponsored by: Innovate UK
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
Now that config(8) has supported include for 19 years, transition to
including the NOTES files. include support didn't exist at the time,
nor did the envvar stuff recently added. Now that it does, eliminate
the building of LINT files by just including everything you need.
Note: This may cause conflicts with updating in some cases.
find sys -name LINT\* -rm
is suggested across this commit to remove the generated LINT
files.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
The boot metadata (also referred to as modinfo, or preload metadata)
provides information about the size and location of the kernel,
pre-loaded modules, and other metadata (e.g. the EFI framebuffer) to be
consumed during by the kernel during early boot. It is encoded as a
series of type-length-value entries and is usually constructed by
loader(8) and passed to the kernel. It is also faked on some
architectures when booted by other means.
Although much of the module information is available via kldstat(8),
there is no easy way to debug the metadata in its entirety. Add some
routines to parse this data and allow it to be printed to the console
during early boot or output via a sysctl.
Since the output can be lengthly, printing to the console is gated
behind the debug.dump_modinfo_at_boot kenv variable as well as the
BOOTVERBOSE flag. The sysctl to print the metadata is named
debug.dump_modinfo.
Reviewed by: tsoome
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26687
It is unlikely, but possible, that an unrecognized or unsupported
relocation type is encountered while trying to load a kernel module. If
this occurs we should offer the symbol index as a hint to the user.
While here, fix some small style issues.
Reviewed by: markj, kib (amd64 part, in D26701)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
This appears to be a typo. The AdvSIMD field encodes support for
half-precision floating point SIMD instructions, which corresponds to
HWCAP_ASIMDHP, not HWCAP_ASIMDDP.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Use address of the pointer passed to kernel to determine whether the pointer
is a FDT block (physical address) or a module pointer (virtual kernel address).
This fragment was supposed to be committed before r366196, but I accidentally
skipped it in a patch series.
Reported by: bz
It was removed in r355289 but forgot to return it back when new u-boot booti
support was committed. Although booti is not the preferred method of
booting the kernel, it is very useful for the initial phase of porting
FreeBSD to a new platform or booting the kernel on various embedded boards
in an industrial environment.
Don't map same physical memory multiple times with different cache attributes.
This is explicitly stated as architectural undefined behavior, leading to
coherency issues sooner or later.
