Commit Graph

1076 Commits

Author SHA1 Message Date
KATO Takenori
03245f094d Use reset port before clearing page table in cpu_reset if PC98 is
defined.  Clearing page table could hang some new PC-98.
1997-04-16 12:11:37 +00:00
Bruce Evans
06e33296dd Only do indirections in ENTRY() if _ARCH_INDIRECT is defined. 1997-04-15 14:06:34 +00:00
Poul-Henning Kamp
3845d1185d Forget all about APM. Instead of "hlt" call through a vector which
APM can then fiddle with.  Default for the vector is to "htl; ret"
1997-04-14 18:12:05 +00:00
Bruce Evans
da3df630ac Use the same IOPL check as in syscons.
Reviewed by:	pst, joerg
1997-04-14 15:54:39 +00:00
Bruce Evans
58611a61ed Fixed printing of registers in dbflalt_handler(). The registers
were always in a tss; that tss just changed from the one in the
pcb to common_tss (who knows where it was when there was no curpcb?).
Not using the pcb also fixed the problem that there is no pcb in
idle(), so we now always get useful register values.
1997-04-14 13:52:52 +00:00
Justin T. Gibbs
c1aa7eb5f4 GENERIC, LINT:
Add an ie entry that corresponds to the location the old ix entry used
to probe and kill the ix entry.

files.i386:
Remove entries for the ix driver.
1997-04-14 00:35:25 +00:00
Bruce Evans
d12ee02d12 Don't forget to set `runtime' in fork_trampoline(). The time slice before
switching to a child for the first time was being counted twice.  I think
this only affected unimportant statistics.

Simplified arg handling in fork_trampoline().  splz() doesn't actually
smash the registers of interest.
1997-04-13 16:58:08 +00:00
John Dyson
f39aebddfc Decrease the amount of memory allocated for bouncing. This will
allow large systems to boot successfully with bounce buffers compiled
in.  We are now limiting bounce space to 512K.  The 8MB allocated for
a 512MB system is very bogus -- and that is now fixed.
1997-04-13 04:07:24 +00:00
John Dyson
aec17d5078 The pmap code was too generous in the allocation of kva space for
the pv entries.  This problem has become obvious due to the increase
in the size of the pv entries.  We need to create a more intelligent
policy for pv entry management eventually.
Submitted by:	David Greenman <dg@freebsd.org>
1997-04-13 03:35:30 +00:00
John Dyson
5856e12e69 Fully implement vfork. Vfork is now much much faster than even our
fork. (On my machine, fork is about 240usecs, vfork is 78usecs.)

Implement rfork(!RFPROC !RFMEM), which allows a thread to divorce its memory
	from the other threads of a group.

Implement rfork(!RFPROC RFCFDG), which closes all file descriptors, eliminating
	possible existing shares with other threads/processes.

Implement rfork(!RFPROC RFFDG), which divorces the file descriptors for a
	thread from the rest of the group.

Fix the case where a thread does an exec.  It is almost nonsense for a thread
	to modify the other threads address space by an exec, so we
	now automatically divorce the address space before modifying it.
1997-04-13 01:48:35 +00:00
Stefan Eßer
5c03639065 Mask out revision register in consistency test of class register. 1997-04-09 11:34:50 +00:00
Stefan Eßer
6df09d1e0b Fix spelling of align and interrupt in comments. 1997-04-09 09:16:27 +00:00
Stefan Eßer
b4b8847934 Fix consistency test to not fail on pre PCI 2.0 motherboards 1997-04-09 09:15:03 +00:00
Peter Wemm
e2d8771131 Lower the spl() of the new process from splhigh() right away, since
nothing else will lower it until either much later, or never(?) for
kernel processes.

This basically re-fixes what Bruce fixed in rev 1.29 of kern_fork.c,
which was broken again now the child does not execute back up the fork()
calling tree.
1997-04-07 11:42:09 +00:00
Peter Wemm
a0c3795f19 Use UPAGES_HOLE instead of UPAGES in case it's changed some time.
Rename the PT* index KSTK* #defines to UMAX*, since we don't have a kernel
stack there any more..

These are used to calculate VM_MAXUSER_ADDRESS and USRSTACK, and really
do not want to be changed with UPAGES since BSD/OS 2.x binary compatability
depends on it.
1997-04-07 09:30:22 +00:00
Peter Wemm
e8fa13fdd9 Clean up some dead wood. Kill the page table page for mapping the
proc0/idlePTD/bootstrap stack into place in user space.  We save 4K.
Remove p0upa, it is now unneeded.
1997-04-07 08:38:19 +00:00
Peter Wemm
a2a1c95c10 The biggie: Get rid of the UPAGES from the top of the per-process address
space. (!)

Have each process use the kernel stack and pcb in the kvm space.  Since
the stacks are at a different address, we cannot copy the stack at fork()
and allow the child to return up through the function call tree to return
to user mode - create a new execution context and have the new process
begin executing from cpu_switch() and go to user mode directly.
In theory this should speed up fork a bit.

Context switch the tss_esp0 pointer in the common tss.  This is a lot
simpler since than swithching the gdt[GPROC0_SEL].sd.sd_base pointer
to each process's tss since the esp0 pointer is a 32 bit pointer, and the
sd_base setting is split into three different bit sections at non-aligned
boundaries and requires a lot of twiddling to reset.

The 8K of memory at the top of the process space is now empty, and unmapped
(and unmappable, it's higher than VM_MAXUSER_ADDRESS).

Simplity the pmap code to manage process contexts, we no longer have to
double map the UPAGES, this simplifies and should measuably speed up fork().

The following parts came from John Dyson:

Set PG_G on the UPAGES that are now in kernel context, and invalidate
them when swapping them out.

Move the upages object (upobj) from the vmspace to the proc structure.

Now that the UPAGES (pcb and kernel stack) are out of user space, make
rfork(..RFMEM..) do what was intended by sharing the vmspace
entirely via reference counting rather than simply inheriting the mappings.
1997-04-07 07:16:06 +00:00
Peter Wemm
271b264e4c No longer use an i386tss as the basis of our pcb - it wasn't particularly
convenient and makes life difficult for my next commit.  We still need
an i386tss to point to for the tss slot in the gdt, so we use a common
tss shared between all processes.

Note that this is going to break debugging until this series of commits
is finished.  core dumps will change again too. :-(  we really need
a more modern core dump format that doesn't depend on the pcb/upages.

This change makes VM86 mode harder, but the following commits will remove
a lot of constraints for the VM86 system, including the possibility of
extending the pcb for an IO port map etc.

Obtained from: bde
1997-04-07 06:45:18 +00:00
Stephen McKay
bc19f8a39e Prevent wedging of the stat clock because of missed interrupts.
This should cure the "alternate system clock has died!" problem.

Discussed with: bde, joerg
1997-04-06 13:25:48 +00:00
John Dyson
a04c970a7a Fix the gdb executable modify problem. Thanks to the detective work
by Alan Cox <alc@cs.rice.edu>, and his description of the problem.

The bug was primarily in procfs_mem, but the mistake likely happened
due to the lack of vm system support for the operation.  I added
better support for selective marking of page dirty flags so that
vm_map_pageable(wiring) will not cause this problem again.

The code in procfs_mem is now less bogus (but maybe still a little
so.)
1997-04-06 02:29:45 +00:00
Bruce Evans
12f2987754 Removed a wrong comment of mine.
Removed unused #includes.
1997-04-01 16:22:31 +00:00
David Greenman
9caaadb63a Changed the way that the exec image header is read to be filesystem-
centric rather than VM-centric to fix a problem with errors not being
detectable when the header is read.
Killed exech_map as a result of these changes.
There appears to be no performance difference with this change.
1997-03-31 11:11:26 +00:00
Joerg Wunsch
514e9fd6b8 Implement the `detach' command for remote GDB. It gets you back at DDB. 1997-03-30 16:03:00 +00:00
Poul-Henning Kamp
3d4d8fe94d Sanitize APM a bit. Convert various #ifdef to id_flags instead.
You may want to add "flags 0x31" to apm0 if you have a lousy
implementation.  Read LINT.
1997-03-29 11:07:12 +00:00
Bruce Evans
83eab616cf Don't keep cpu interrupts enabled during the lookup in vm_page_zero_idle().
Lookup isn't done every time the system goes idle now, but it can still
take > 1800 instructions in the worst case, so if cpu interrupts are kept
disabled then it might lose 20 characters of sio input at 115200 bps.

Fixed style in vm_page_zero_idle().
1997-03-29 04:35:26 +00:00
Bruce Evans
b8fa61d129 Added a setjmp() and a longjmp() so that an unexpected trap inside
ddb isn't necessarily fatal.  You can now do silly things like
`call vprint' and `show map' without losing control.
1997-03-28 12:56:07 +00:00
Bruce Evans
b825df51c6 Backed out rev.1.5. if %cs is bad, %eip may be bad, but this is no longer
fatal.
1997-03-28 12:46:52 +00:00
Joerg Wunsch
403d7829ac Something long overdue: compile inb() and outb() into the kernel as
functions if DDB is available.  The remaining occurences are usually
only inlined and thus not available in DDB.

I'm sure Bruce will have 23 additions to these 30 lines of code, but
at least it's a starting point. ;-)
1997-03-28 12:37:44 +00:00
Andrey A. Chernov
e5df661c83 Remove recently commited support for iobase == -2 ("port none")
is is really probe routine task (return -1 for no ports)
1997-03-28 01:02:17 +00:00
Mike Pritchard
89b37cfe4b Change sigreturn() to return EFAULT if it is passed an
address outside of the process's address space.
Now it matches its man page :-).  Closes PR# 2682.

Discussed with: bde
Submitted by:	Jonathan Lemon <jlemon@americantv.com>
1997-03-25 23:43:01 +00:00
Andrey A. Chernov
e4960ae4f5 Replace more verbose "at <not configured>" with less verbose "at ?",
we don't need much attention here, because this diagnostic printed first
and then card will be configured.
1997-03-25 03:29:40 +00:00
Andrey A. Chernov
70b57d05df Follow config intention for iobase:
print "at <not configured>" for iobase == -1 (autodetect not happens)
and not print anything for iobase == -2 (none)
Old code treat this two special config numbers as big port numbers.
1997-03-25 03:13:05 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
KATO Takenori
5fa4a05818 Fix typo.
Submitted by:	Bruce Evans <bde@zeta.org.au>
1997-03-24 07:23:05 +00:00
KATO Takenori
a8e282d6c3 Oops, I forgot to `cvs add'. This file is a part of new CPU
identification and initialization routines.
1997-03-22 19:00:36 +00:00
KATO Takenori
4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
John Dyson
8e56e56134 Decrease the latency/overhead in the prezero code when there is
an adequate number of prezeroed pages.
1997-03-22 04:28:16 +00:00
Bruce Evans
a92a5c234e Quoted CMD640. It's still missing from options.i386.
Removed stale comment saying that npx0 is mandatory.
1997-03-13 19:03:58 +00:00
Stefan Eßer
09d5def9ce Activate CMD640 workaround 1997-03-12 19:59:58 +00:00
Bruce Evans
13a44161a2 Moved userland assembler macros from <machine/asmacros.h> to
<machine/asm.h>.
1997-03-09 13:57:33 +00:00
Bruce Evans
644ba7e84e Cloned src/lib/libc/i386/DEFS.h to create <machine/asm.h> for the i386.
The former file was too hard to get at from other parts of the src tree
and will go away.
1997-03-09 10:39:15 +00:00
Stefan Eßer
81cf5d7aae improve pcibus_check: Only assume PCI if at least one PCI to anything bridge
on bus 0.
This fixes problems with EISA-only systems mistakenly being assumed to support PCI.
1997-03-05 20:52:00 +00:00
Bruce Evans
a5c1768dd5 Made FPU stuff conditional on npx as well as I586_CPU. 1997-03-05 16:30:55 +00:00
Bruce Evans
65ff42dd17 Only print clock calibration messages if the system was booted with -v.
Submitted by:	partly by gpalmer
1997-03-05 08:08:48 +00:00
Gary Palmer
0b146b65d2 Back out the patch to break up the clock probe lines. Instead, follow
Bruce's suggestion of deleting "relative to mc146818A clock ",
thus shortening the line ...
1997-03-05 00:54:00 +00:00
Gary Palmer
5c5e8d766c Split the rather long and line-wrapping clock probe messages on boot.
(2.2?)

Submitted by:	Mathew Dood <winter@jurai.net>
1997-03-04 09:24:01 +00:00
Andrey A. Chernov
50ac8e2f59 Add missing #include <machine/segments.h> for ISPL and SEL_UPL macros 1997-03-01 05:44:09 +00:00
Bruce Evans
9bb932b6f2 Print function args in the current radix instead of always in hex.
Print the stack pointer together with the frame pointer in the trap,
syscall and interrupt messages.  The frame pointer is not very useful
for locating syscall args since syscall functions don't have a frame
pointer.

Print all the numbers in the trap, syscall and interrupt messages in
the default radix.  The syscall number was confusing because it was
printed in decimal.

Use %#n format more and 0x%x less.  0x%x of course doesn't work with
a variable radix.  ddb is now fairly consistent about using %+#n to
print all numbers.  It omits the '+' for signed numbers the '#' in a
few cases (e.g., for function args) to save space.
1997-02-28 12:36:18 +00:00
Bruce Evans
014e652753 Fixed the gcc ellipsis change to work with gcc-1.x. 1997-02-28 07:12:34 +00:00
Alexander Langer
a28b3400eb Typo police. 1997-02-24 00:37:43 +00:00