Commit Graph

49 Commits

Author SHA1 Message Date
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Julian Elischer
93fcb5a28d Revert a part of the MRT commit that proved un-needed.
rt_check() in its original form proved to be sufficient and
rt_check_fib() can go away (as can its evil twin in_rt_check()).

I believe this does NOT address the crashes people have been seeing
in rt_check.

MFC after:	1 week
2008-09-14 08:19:48 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Robert Watson
30d239bc4c Merge first in a series of TrustedBSD MAC Framework KPI changes
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:

  mac_<object>_<method/action>
  mac_<object>_check_<method/action>

The previous naming scheme was inconsistent and mostly
reversed from the new scheme.  Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier.  Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods.  Also simplify, slightly,
some entry point names.

All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.

Sponsored by:	SPARTA (original patches against Mac OS X)
Obtained from:	TrustedBSD Project, Apple Computer
2007-10-24 19:04:04 +00:00
Robert Watson
d95fcd8db7 Remove obfuscating OpenBSD/NetBSD/BSDI/FreeBSD 2.x/FreeBSD 5.x ifdefs
from around printfs and address list iteration.
2006-12-01 22:45:43 +00:00
Robert Watson
aed5570872 Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h
begun with a repo-copy of mac.h to mac_framework.h.  sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.

This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.

Obtained from:	TrustedBSD Project
Sponsored by:	SPARTA
2006-10-22 11:52:19 +00:00
Yaroslav Tykhiy
4b97d7affd There is a consensus that ifaddr.ifa_addr should never be NULL,
except in places dealing with ifaddr creation or destruction; and
in such special places incomplete ifaddrs should never be linked
to system-wide data structures.  Therefore we can eliminate all the
superfluous checks for "ifa->ifa_addr != NULL" and get ready
to the system crashing honestly instead of masking possible bugs.

Suggested by:	glebius, jhb, ru
2006-06-29 19:22:05 +00:00
Yaroslav Tykhiy
e54e7d6dae Use TAILQ_FOREACH in the __FreeBSD__ case, too.
Funnily enough, rev. 1.15 changed the __Net and __Open cases only.
2006-06-29 17:56:21 +00:00
Gleb Smirnoff
530f95fc08 o Make rt_check() function more strict:
- rt0 passed to rt_check() must not be NULL, assert this.
  - rt returned by rt_check() must be valid locked rtentry,
    if no error occured.
o Modify callers, so that they never pass NULL rt0
  to rt_check().

Reviewed by:	sam, ume (nd6.c)
2005-08-11 08:14:53 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Gleb Smirnoff
9bd8ca3014 In preparation for fixing races in ARP (and probably in other
L2/L3 mappings) make rt_check() return a locked rtentry.
2005-08-09 08:39:56 +00:00
Robert Watson
f002340544 Lock down netnatm and mark as MPSAFE:
- Introduce a subsystem mutex, natm_mtx, manipulated with accessor macros
  NATM_LOCK_INIT(), NATM_LOCK(), NATM_UNLOCK(), NATM_LOCK_ASSERT().  It
  protects the consistency of pcb-related data structures.  Finer grained
  locking is possible, but should be done in the context of specific
  measurements (as very little work is done in netnatm -- most is in the
  ATM device driver or socket layer, so there's probably not much
  contention).

- Remove GIANT_REQUIRED, mark as NETISR_MPSAFE, remove
  NET_NEEDS_GIANT("netnatm").

- Conditionally acquire Giant when entering network interfaces for
  ifp->if_ioctl() using IFF_LOCKGIANT(ifp)/IFF_UNLOCKGIANT(ifp) in order
  to coexist with non-MPSAFE atm ifnet drivers..

- De-spl.

MFC after:	2 weeks
Reviewed by:	harti, bms (various versions)
2005-07-18 16:55:46 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Luigi Rizzo
cd46a114fc This commit does two things:
1. rt_check() cleanup:
    rt_check() is only necessary for some address families to gain access
    to the corresponding arp entry, so call it only in/near the *resolve()
    routines where it is actually used -- at the moment this is
    arpresolve(), nd6_storelladdr() (the call is embedded here),
    and atmresolve() (the call is just before atmresolve to reduce
    the number of changes).
    This change will make it a lot easier to decouple the arp table
    from the routing table.

    There is an extra call to rt_check() in if_iso88025subr.c to
    determine the routing info length. I have left it alone for
    the time being.

    The interface of arpresolve() and nd6_storelladdr() now changes slightly:
     + the 'rtentry' parameter (really a hint from the upper level layer)
       is now passed unchanged from *_output(), so it becomes the route
       to the final destination and not to the gateway.
     + the routines will return 0 if resolution is possible, non-zero
       otherwise.
     + arpresolve() returns EWOULDBLOCK in case the mbuf is being held
       waiting for an arp reply -- in this case the error code is masked
       in the caller so the upper layer protocol will not see a failure.

2. arpcom untangling
    Where possible, use 'struct ifnet' instead of 'struct arpcom' variables,
    and use the IFP2AC macro to access arpcom fields.
    This mostly affects the netatalk code.

=== Detailed changes: ===
net/if_arcsubr.c
   rt_check() cleanup, remove a useless variable

net/if_atmsubr.c
   rt_check() cleanup

net/if_ethersubr.c
   rt_check() cleanup, arpcom untangling

net/if_fddisubr.c
   rt_check() cleanup, arpcom untangling

net/if_iso88025subr.c
   rt_check() cleanup

netatalk/aarp.c
   arpcom untangling, remove a block of duplicated code

netatalk/at_extern.h
   arpcom untangling

netinet/if_ether.c
   rt_check() cleanup (change arpresolve)

netinet6/nd6.c
   rt_check() cleanup (change nd6_storelladdr)
2004-04-25 09:24:52 +00:00
Hartmut Brandt
5361744dfa Fix a warning when NATM is not defined. In this case s is not used. 2004-01-09 11:25:14 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Hartmut Brandt
59db9a86db Implement a mechanism by which ATM drivers can inform interested
parts of the system about certain kinds of events, like changes
in the ABR rate, changes in the carrier state, PVC changes. The
main consumers of these events are the harp(4) pseudo-driver
and the ILMI daemon via ng_atm(4).
2003-07-29 13:04:52 +00:00
Hartmut Brandt
09d405d969 Implement an utility function that can be used by device drivers to
implement the ATMIOCGVCCS ioctls. This routine handles changing
VCC tables (which can occure because we cannot hold the driver mutex
while allocating memory) with a loop and a re-allocation, should the
table not fit in the allocated memory.
2003-07-15 10:37:09 +00:00
Hartmut Brandt
198b0c39a9 The mbuf put on the interface queue contains the 4-byte pseudoheader.
Account for this in the byte count.
2003-07-15 10:30:57 +00:00
Hartmut Brandt
9bdca35df1 Add the hooks for netgraph and HARP to the NATM code. This allows us
to use one set of drivers for all ATM upper layers.
2003-06-23 16:53:28 +00:00
Hartmut Brandt
76335e1302 Apply style(9) to this file. I'm going to touch large parts of this file
so make this beforehand.
2003-06-23 10:32:13 +00:00
Poul-Henning Kamp
21b16e9715 Wrap macro in do {...} while(0);
Found by:       FlexeLint
2003-05-31 20:07:16 +00:00
Hartmut Brandt
2102bdf21a Define a link layer MIB for ATM. Most fields of this MIB are needed by
ILMI daemons. Factor out common softc fields for all ATM interfaces that
need to be externally visible into an ifatm structure and make the midway
driver using this structure and fill the MIB.
2003-05-05 16:35:52 +00:00
Hartmut Brandt
d2c96fc51f Add module data and version to the atm_subr and reference this info from the
(currently) only consumer (en).

Add a sysctl node hw.atm where the atm drivers will hook on their hardware
sysctl sub-trees.

Make atm_ifattach call if_attach and remove the corresponding call to if_attach
from en. Create atm_ifdetach and use that in en.

While the last change actually changes the interface this is not a problem in
practice because the only other consumer of this API is an older LANAI driver
on the net, that is not ready for current anyway.

Reviewed by:	-atm
2003-04-29 08:07:44 +00:00
Hartmut Brandt
57648f8aae This corrects a longstanding endian bug in processing LLC/SNAP encoded
frames. A comment in if_atm.h suggests that both macros, that for extracting
the ethertype and that for inserting it, handle their argument in host
byte order. In fact, the inserting macro treated its argument as an opposite
host order short and the calling code feeds it the result of htons(). This
happens to work on i386, but fails on sparc. Make the macro use real host
endianess.

Reviewed by:	kjc, atm@
2003-03-13 12:44:06 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Matthew N. Dodd
098a8c3b64 De-register. 2003-03-03 00:21:52 +00:00
Matthew N. Dodd
7f760c4890 Reduce code duplication. This adds the function rt_check() to route.c.
Approved by:	 sam (in principle)
2003-03-02 21:34:37 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
6fc32a2495 network interface and link layer changes:
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible

Reviewed by:	many
Approved by:	re
2002-11-15 00:00:15 +00:00
Robert Watson
9476111d3a When a packet is destined for delivery via an ATM medium, perform
appropriate interface transmission checks and delivery labeling.  While
we don't have a local ATM configuration, this code is almost identical
to all other interface classes.

Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-20 22:20:48 +00:00
Peter Wemm
d490e63aa7 Fix warning; remove unused variable 2001-06-15 07:32:25 +00:00
Poul-Henning Kamp
37d4006626 Another round of the <sys/queue.h> FOREACH transmogriffer.
Created with:   sed(1)
Reviewed by:    md5(1)
2001-02-04 16:08:18 +00:00
Poul-Henning Kamp
22f2982675 Use <sys/queue.h> macro api rather than fondle its implementation detals.
Created with:	/usr/bin/sed
Reviewed by:	/sbin/md5
2001-02-03 11:46:35 +00:00
Jonathan Lemon
df5e198723 Lock down the network interface queues. The queue mutex must be obtained
before adding/removing packets from the queue.  Also, the if_obytes and
if_omcasts fields should only be manipulated under protection of the mutex.

IF_ENQUEUE, IF_PREPEND, and IF_DEQUEUE perform all necessary locking on
the queue.  An IF_LOCK macro is provided, as well as the old (mutex-less)
versions of the macros in the form _IF_ENQUEUE, _IF_QFULL, for code which
needs them, but their use is discouraged.

Two new macros are introduced: IF_DRAIN() to drain a queue, and IF_HANDOFF,
which takes care of locking/enqueue, and also statistics updating/start
if necessary.
2000-11-25 07:35:38 +00:00
Kenjiro Cho
0a48a6902d remove "register" specifiers to supress compiler warning. 2000-04-26 02:40:33 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Yoshinobu Inoue
cfa1ca9dfa udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-07 17:39:16 +00:00
Kenjiro Cho
0ce8bd9571 clean up en atm driver
o fix DDB support
   - include "opt_ddb.h"
   - fix Debugger() arg
   pointed out by bde

 o back out pvc shadow interface support
   - it is currently not used
   - to make it easier to merge another implementation

 o misc minor cleanup
1999-05-08 14:23:40 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Kenjiro Cho
4f53e3cc7a update ATM driver. (base version: midway.c 1.67 --> 1.68)
several new features are added:
	- support vc/vp shaping
	- support pvc shadow interface

code cleanup:
	- remove WMAYBE related code.  ENI WMAYBE DMA doen't work.
	- remove updating if_lastchange for every packet.
	- BPF related code is moved to midway.c as it should be.
	  (bpfwrite should work if atm_pseudohdr and LLC/SNAP are
	  prepended.)
	- BPF link type is changed to DLT_ATM_RFC1483.
	  BPF now understands only LLC/SNAP!! (because bpf can't
	  handle variable link header length.)
	  It is recommended to use LLC/SNAP instead of NULL
	  encapsulation for various reasons.  (BPF, IPv6,
	  interoperability, etc.)

the code has been used for months in ALTQ and KAME IPv6.

OKed by phk long time ago.
1998-07-29 05:35:16 +00:00
Poul-Henning Kamp
227ee8a188 Eradicate the variable "time" from the kernel, using various measures.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.

Most uses of time.tv_sec now uses the new variable time_second instead.

gettime() changed to getmicrotime(0.

Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).

A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.

Add a new nfs_curusec() function.

Mark a couple of bogosities involving the now disappeard time variable.

Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.

Change profiling in ncr.c to use ticks instead of time.  Resolution is
the same.

Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.

Reviewed by:	bde
1998-03-30 09:56:58 +00:00
Eivind Eklund
e0d781f3a5 Make POWERFAIL_NMI, PPS_SYNC and NATM new style options.
This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Bruce Evans
16355bd11c Use gettime() instead of assignment from time'. (time' is too
volatile to use outside of splclock().  microtime() is probably too
expensive to use for every i/o.  However, setting ifi_lastchange for
every i/o is just wrong according to the comment about ifi_lastchange
in <net/if.h>.  It is set then for atm, fddi and the latest version
of ppp.)
1997-11-18 13:37:56 +00:00
Bruce Evans
1fd0b0588f Removed unused #includes. 1997-08-02 14:33:27 +00:00
Kenjiro Cho
413fe3928f import Chuck Cranor's ATM driver 1997-05-09 07:48:14 +00:00