Commit Graph

999 Commits

Author SHA1 Message Date
Sean Bruno
062a4b8c68 Deprecate kernel configuration option EM_MULTIQUEUE now that the em(4)
driver conforms to iflib.
2017-01-12 14:38:18 +00:00
Sean Bruno
f2d6ace4a6 Migrate e1000 to the IFLIB framework:
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko

Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217

Please report problems to freebsd-net@freebsd.org

Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.

Submitted by:	mmacy@nextbsd.org
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	Limelight Networks and Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D8299
2017-01-10 03:23:22 +00:00
Dimitry Andric
4644fe913f Put a tentative import date in ObsoleteFiles.inc and UPDATING. 2016-12-17 18:35:17 +00:00
Dimitry Andric
45bd65d638 Add UPDATING entry and update ObsoleteFiles.inc. 2016-11-26 01:17:03 +00:00
Dimitry Andric
7736f1a963 Add UPDATING entry for clang/llvm 3.9.0 import. 2016-11-24 22:18:55 +00:00
Justin Hibbits
4026b44790 Fix buildworld for powerpc.
vmpage requires struct pmap to exist and contain a pm_stats field.  As of
r308817, either AIM or BOOKE is required to be set in order to get their
respective pmap structs.  Rather than expose them both, or try to unify them
unnecessarily, add a third option which contains only a pm_stats field, and
change the two existing pmap structures to place the common fields at the
beginning of the struct.  This actually fixes the stats collection by libkvm on
AIM hardware, because before it was accessing a possibly different offset, which
would cause it to read garbage.

Bump __FreeBSD_version to denote this ABI change, so that ports which depend on
libkvm can be rebuilt.
2016-11-20 06:10:12 +00:00
Bryan Drewery
fb9b2ab190 Fix grammar nit 2016-11-17 00:21:55 +00:00
Andriy Gapon
448897d366 add iic interface to ig4 driver, move isl and cyapa to iicbus
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers.  However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction.  So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).

At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication.  Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4).  In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.

The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left).  The method expects
7-bit addresses.

There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices.  There is no need to
provide the device hints in that case,

Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous.  Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().

Tested by:	grembo, Matthias Apitz <guru@unixarea.de> (w/o
		chromebook_platform)
Discussed with:	grembo, imp
Reviewed by:	wblock (docs)
MFC after:	1 month
Relnotes:	yes
Differential Revision: https://reviews.freebsd.org/D8172
2016-10-30 12:15:33 +00:00
Warner Losh
9013696194 Tweak the UPDATING message a bit about the upgrade path.
Add some automation into Makefile.inc1 to to enforce known good
upgrade from source paths.
2016-10-23 18:00:08 +00:00
Warner Losh
fca3dcdf4e After deeper software archaeology, reports that 10.3R was affected
turned out to be mistaken. Adjust the entry and fix a few typos.
2016-10-19 15:13:08 +00:00
Warner Losh
5ad05815a4 Document the unique requirements for upgrading more
prominently. Unlike in the past (dating back to the 4.x branch point),
you cannot upgrade from any point on the past couple of stable
branches to -current. Due to a bug in clang that existed before
r286035 in stable/9 or r286033 in stable/10, we cannot compile llvm
that's in 11.x or -current. Unfortunately, these revisions are after
9.3R and 10.3R on their respective branches. stable/11 and 11.0R are
not affected.

This also affects the upgrade path to 11 (including 11.0R) from
stable/9 and stable/10 (which would otherwise work, were it not for
this bug).

We also need to amend the 11.0R release notes.

MFC After: 3 days
2016-10-19 13:45:51 +00:00
Andriy Voskoboinyk
2616dd0b80 Fix dates + add an UPDATING entry. 2016-10-17 21:35:13 +00:00
Baptiste Daroussin
31b54b30fe Improve wording
Submitted by:	lidl
2016-10-15 15:55:04 +00:00
Baptiste Daroussin
963d6c18f4 Fix typo
Reported by:	"N.J. Mann" <njm@njm.me.uk>
2016-10-15 12:32:59 +00:00
Baptiste Daroussin
a0135a1e35 Remove GNU rcs from base.
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.

Relnotes:	yes
2016-10-15 12:07:37 +00:00
Jonathan T. Looney
bd79708dbf In the TCP stack, the hhook(9) framework provides hooks for kernel modules
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.

Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.

This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.

Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.

Reviewed by:	rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
Ed Maste
9ce3c6b09a Retire WITHOUT_ELFCOPY_AS_OBJCOPY option
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.

We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.

Reviewed by:	brooks, imp
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7337
2016-10-03 17:49:26 +00:00
Marcel Moolenaar
bba95d2d7e Relocatable object files are renamed from *.So to *.pico
Reminder by:	imp@
2016-09-25 16:39:18 +00:00
Baptiste Daroussin
452e188911 Sperify that users can find rcs and rcs57 in ports
Reported by:	cy
2016-09-18 18:27:28 +00:00
Baptiste Daroussin
f902d06ce3 Use the proper word
Reported by:	danfe
2016-09-18 15:55:57 +00:00
Baptiste Daroussin
0c52d77571 Apparently we are supposed to use 2 spaces after full stop
Reported by:	danfe
2016-09-18 15:51:34 +00:00
Baptiste Daroussin
0adf2bc849 Disable GNU rcs by default
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)

Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.

GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
2016-09-18 15:01:11 +00:00
Baptiste Daroussin
5b71d8999c Remove backup_uses_rcs from rc.subr
In preparation for the removal of GNU rcs from base, remove the backup_uses_rcs
functionality from the rc.subr backup_file feature. This functionnality was off
by default

Reviewed by:	wblock
Differential Revision:	https://reviews.freebsd.org/D7883
2016-09-18 12:49:23 +00:00
Conrad Meyer
06b9366795 queue(3): Enhance queue debugging macros
Split the QUEUE_MACRO_DEBUG into QUEUE_MACRO_DEBUG_TRACE and
QUEUE_MACRO_DEBUG_TRASH.

Add the debug macrso QMD_IS_TRASHED() and QMD_SLIST_CHECK_PREVPTR().

Document these in queue.3.

Reviewed by:	emaste
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D3984
2016-09-08 21:20:01 +00:00
Navdeep Parhar
1c828193df Bump __FreeBSD_version for r304787 and add a note about it to UPDATING. 2016-08-25 05:28:02 +00:00
Ryan Stone
41029db13f Don't check for broadcast IPs on non-bcast pkts
in_broadcast() can be quite expensive, so skip calling it if the
incoming mbuf wasn't sent to a broadcast L2 address in the first
place.

Reviewed by: gnn
MFC after: 2 months
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7309
2016-08-18 22:59:05 +00:00
George V. Neville-Neil
3e7e23332f Remove the obsolete and unused openbsd_poll system call. (Phase 2)
Reported by:	brooks
Reviewed by:	brooks, jhb
Differential Revision:	https://reviews.freebsd.org/D7548
2016-08-18 10:54:39 +00:00
Brooks Davis
f0db85530e Minor wording improvements to the note about pipe(2) removal.
MFC after:	5 days
Sponsored by:	DARPA, AFRL
2016-07-20 18:00:22 +00:00
Cy Schubert
bcc238eaed Revert r302865 and it's sister r302866 as r302865 causes some breakage.
Reported by:	Guy Yur <guyyur@gmail.com>
2016-07-15 15:09:48 +00:00
Cy Schubert
651ad92c02 Document that missing KERNCONF files will now cause buildkernel to fail.
Suggested by:		ngie@
Differential Revision:	D7167
2016-07-15 04:50:40 +00:00
Glen Barber
981b538fd6 Spell '12.x' correctly in UPDATING.
Submitted by:	lidl
Approved by:	re (implicit)
Sponsored by:	The FreeBSD Foundation
2016-07-08 02:19:09 +00:00
Glen Barber
ae940db11f Reflect head is now 12.0-CURRENT.
Approved by:	re (implicit)
Sponsored by:	The FreeBSD Foundation
2016-07-08 00:12:29 +00:00
Brooks Davis
678243ffda Fix two typos in r302152.
Approved by:	re (implicit)
2016-06-23 21:09:07 +00:00
Brooks Davis
ddc2f805a5 Add an UPDATING entry for the pipe() -> pipe2() transition.
Approved by:	re (gjb)
Sponsored by:	DARPA, AFRL
2016-06-23 21:02:05 +00:00
Alan Somers
ab5d7fb163 Fix typo from r300880
Reported by:	rpokala
MFC after:	Never
Sponsored by:	Spectra Logic Corp
2016-05-27 22:44:33 +00:00
Alan Somers
583febf416 Strip leading spaces off of a SCSI disk's serial number
sys/cam/scsi/scsi_xpt.c
	Strip leading spaces off of a SCSI disk's reported serial number
	when populating the CAM serial number. This affects the output of
	"diskinfo -v" and the names of /dev/diskid/DISK-* device nodes,
	among other things.

	SPC5r05 says that the Product Serial Number field from the Unit
	Serial Number VPD page is right-aligned. So any leading spaces are
	not part of the actual serial number. Most devices don't left-pad
	their serial numbers, but some do. In particular, the SN VPD page
	that an LSI HBA emulates for a SATA drive contains enough
	left-padding to fill a 20-byte field.

UPDATING
	Add a note to UPDATING, because some users may have to update
	/etc/fstab or geom labels.

Reviewed by:	ken, mav
MFC after:	Never
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6516
2016-05-27 22:26:43 +00:00
Alan Somers
1b82e02f4d Add bit_count to the bitstring(3) api
Add a bit_count function, which efficiently counts the number of bits set in
a bitstring.

sys/sys/bitstring.h
tests/sys/sys/bitstring_test.c
share/man/man3/bitstring.3
	Add bit_alloc

sys/kern/subr_unit.c
	Use bit_count instead of a naive counting loop in check_unrhdr, used
	when INVARIANTS are enabled. The userland test runs about 6x faster
	in a generic build, or 8.5x faster when built for Nehalem, which has
	the POPCNT instruction.

sys/sys/param.h
	Bump __FreeBSD_version due to the addition of bit_alloc

UPDATING
	Add a note about the ABI incompatibility of the bitstring(3)
	changes, as suggested by lidl.

Suggested by:	gibbs
Reviewed by:	gibbs, ngie
MFC after:	9 days
X-MFC-With:	299090, 300538
Relnotes:	yes
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6255
2016-05-23 20:29:18 +00:00
Ian Lepore
957fc42533 Add a note on how to update a self-hosted armv6hf system to the entry
describing the armv6hf->armv6 change.
2016-05-23 04:07:41 +00:00
Andrew Turner
94098ab7c3 Remove brk and sbrk from arm64. They were defined in The Single UNIX
Specification, Version 2, but marked as legacy, and have been removed from
later specifications. After 12 years it is time to remove them from new
architectures when the main use for sbrk is an invalid method to attempt
to find how much memory has been allocated from malloc.

There are a few places in the tree that still call sbrk, however they are
not used on arm64. They will need to be fixed to cross build from arm64,
but these will be fixed in a follow up commit.

Old copies of binutils from ports called into sbrk, however this has been
fixed around 6 weeks ago. It is advised to update binutils on arm64 before
installing a world that includes this change.

Reviewed by:	brooks, emaste
Obtained from:	brooks
Relnotes:	yes
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D6464
2016-05-20 15:04:48 +00:00
Warner Losh
2c0e9e2a09 Make armv6 hard float abi by default. Kill armv6hf.
Allow CPUTYPE=soft to build the current soft-float abi libraries.
Add UPDATING entry to announce this.

Approved by: re@ (gjb)
2016-05-18 06:01:18 +00:00
John Baldwin
5f0263c120 Change the default installation directory for modules to /boot/modules.
Kernel installs always override KMODDIR when installing modules, so
this default setting is only used for standalone module builds.  Many
out-of-tree modules manually override KMODDIR already to avoid placing
modules in /boot/kernel.  This now makes that behavior the default.

Discussed on:	arch@
Reviewed by:	imp
Relnotes:	yes
2016-05-10 22:32:23 +00:00
Pedro F. Giffuni
a1ff7af013 Misc. build: minor spelling fixes.
No functional change.
2016-05-03 22:01:48 +00:00
Warner Losh
a17433653c Add update. 2016-04-15 04:45:37 +00:00
Warner Losh
13694b35e1 Add note about CAM I/O scheduler. 2016-04-14 22:38:13 +00:00
Bryan Drewery
497e80911e Remove the old depend (mkdep) code and make FAST_DEPEND the one true way.
Reviewed by:	emaste, hselasky (partial), brooks (brief)
Discussed on:	arch@
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D5742
2016-03-30 23:50:23 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Bryan Drewery
d783b170b3 Enable FAST_DEPEND by default.
Discussed on:	arch
Sponsored by:	EMC / Isilon Storage Division
2016-03-11 16:57:41 +00:00
Dimitry Andric
c834228b9d Add an UPDATING entry about installing the boot loaders after installing
the kernel, on amd64.
2016-03-06 17:34:21 +00:00
Dimitry Andric
e74e149f78 Upgrade our copies of clang, llvm, lldb and compiler-rt to 3.8.0
release.

Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.

Release notes for llvm and clang will soon be available here:
<http://llvm.org/releases/3.8.0/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.8.0/tools/clang/docs/ReleaseNotes.html>

Thanks to Ed Maste, Roman Divacky, Davide Italiano and Antoine Brodin
for their help.

Relnotes:	yes
2016-03-05 20:24:31 +00:00
John Baldwin
8b66d3d3bd Add an UPDATING entry for the recent AIO changes.
Suggested by:	maxim
2016-03-04 17:42:59 +00:00