generic watchdoc(9) interface.
Make watchdogd(8) perform as watchdog(8) as well, and make it
possible to specify a check command to run, timeout and sleep
periods.
Update watchdog(4) to talk about the generic interface and add
new watchdog(8) page.
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
and condition variables. Having sleep qeueus in a hash table avoids
having to allocate a queue head for each wait channel. Thus, struct cv
has shrunk down to just a single char * pointer now. However, the
hash table does not hold threads directly, but queue heads. This means
that once you have located a queue in the hash bucket, you no longer have
to walk the rest of the hash chain looking for threads. Instead, you have
a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
differentiates between cv's and sleep/wakeup. For example, calls to
abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and
cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
sleep's no longer inherently bump the priority. Instead, this is soley
a propery of msleep() which explicitly calls sched_prio() before
blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used. The
associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
dropped and replaced with a single explicit clearing of td_wchan.
TD_SET_ONSLEEPQ() would really have only made sense if it had taken
the wait channel and message as arguments anyway. Now that that only
happens in one place, a macro would be overkill.
the process state to zombie when a process exits to avoid a lock order
reversal with the sleepqueue locks. This appears to be the only place
that we call wakeup() with sched_lock held.
to queue threads sleeping on a wait channel similar to how turnstiles are
used to queue threads waiting for a lock. This subsystem will be used as
the backend for sleep/wakeup and condition variables initially. Eventually
it will also be used to replace the ithread-specific iwait thread
inhibitor.
Sleep queues are also not locked by sched_lock, so this splits sched_lock
up a bit further increasing concurrency within the scheduler. Sleep queues
also natively support timeouts on sleeps and interruptible sleeps allowing
for the reduction of a lot of duplicated code between the sleep/wakeup and
condition variable implementations. For more details on the sleep queue
implementation, check the comments in sys/sleepqueue.h and
kern/subr_sleepqueue.c.
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.
Enable the RLIMIT_MEMLOCK checking code in kern_mlock().
Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.
Nuke the vslock() and vsunlock() implementations, which are no
longer used.
Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.
Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.
Modify the callers of sysctl_wire_old_buffer() to look for the
error return.
Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.
Reviewed by: bms
of all, PIPE_EOF is not checked pervasively after everything that can drop
the pipe mutex and msleep(), so fix. Additionally, though it might not
harm anything, pipelock() and pipeunlock() are not used consistently.
Third, the kqueue support functions do not use the pipe mutex correctly.
Last, but absolutely not least, is a race: if pipe_busy is not set on
the closing side of the pipe, the other side that is trying to write to
that will crash BECAUSE PIPE_EOF IS NOT SET! Unconditionally set
PIPE_EOF, and get rid of all the lockups/crashes I have seen trying
to build ports.
Now I believe it is done in the right way.
Removed some XXMAC cases, we now assume 'high' integrity level for all
sysctls, except those with CTLFLAG_ANYBODY flag set. No more magic.
Reviewed by: rwatson
Approved by: rwatson, scottl (mentor)
Tested with: LINT (compilation), mac_biba(4) (functionality)
to use the "year1-year3" format, as opposed to "year1, year2, year3".
This seems to make lawyers more happy, but also prevents the
lines from getting excessively long as the years start to add up.
Suggested by: imp
This is what we came here for: Hang dev_t's from their cdevsw,
refcount cdevsw and dev_t and generally keep track of things a lot
better than we used to:
Hold a cdevsw reference around all entrances into the device driver,
this will be necessary to safely determine when we can unload driver
code.
Hold a dev_t reference while the device is open.
KASSERT that we do not enter the driver on a non-referenced dev_t.
Remove old D_NAG code, anonymous dev_t's are not a problem now.
When destroy_dev() is called on a referenced dev_t, move it to
dead_cdevsw's list. When the refcount drops, free it.
Check that cdevsw->d_version is correct. If not, set all methods
to the dead_*() methods to prevent entrance into driver. Print
warning on console to this effect. The device driver may still
explode if it is also incompatible with newbus, but in that case
we probably didn't get this far in the first place.
Remove the unused second argument from udev2dev().
Convert all remaining users of makedev() to use udev2dev(). The
semantic difference is that udev2dev() will only locate a pre-existing
dev_t, it will not line makedev() create a new one.
Apart from the tiny well controlled windown in D_PSEUDO drivers,
there should no longer be any "anonymous" dev_t's in the system
now, only dev_t's created with make_dev() and make_dev_alias()
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Add missing D_TTY flags to various drivers.
Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.
Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
This commit adds a couple of functions for pseudodrivers to use for
implementing cloning in a manner we will be able to lock down (shortly).
Basically what happens is that pseudo drivers get a way to ask for
"give me the dev_t with this unit number" or alternatively "give
me a dev_t with the lowest guaranteed free unit number" (there is
unfortunately a lot of non-POLA in the exact numeric value of this
number, just live with it for now)
Managing the unit number space this way removes the need to use
rman(9) to do so in the drivers this greatly simplifies the code in
the drivers because even using rman(9) they still needed to manage
their dev_t's anyway.
I have taken the if_tun, if_tap, snp and nmdm drivers through the
mill, partly because they (ab)used makedev(), but mostly because
together they represent three different problems for device-cloning:
if_tun and snp is the plain case: just give me a device.
if_tap has two kinds of devices, with a flag for device type.
nmdm has paired devices (ala pty) can you can clone either of them.
Instead of creating a mutex that we msleep on but don't actually lock when
doing the corresponding wakeup(), in the kthread, lock the mutex associated
with our taskqueue and msleep while the queue is empty. Assert that the
queue is locked when the callback function is called to wake the kthread.
It returns 1 is process is inside of jail and 0 if it is not.
Information if we are in jail or not is not a secret, there is plenty of
ways to discover it. Many people are using own hack to check this and
this will be a legal way from now on.
It will be great if our starting scripts will take advantage of this sysctl
to allow clean "boot" inside jail.
Approved by: rwatson, scottl (mentor)
kernel. I'm not happy with it yet - refinements are to come.
This hack allows the kern.ps_strings and kern.usrstack sysctls to respond
to a 32 bit request, such as those coming from emulated i386 binaries.
missing parentheses). Use default handling (trap to debugger) for
udev2dev(x, 1) since it is an error and doesn't happen anywhere in
the sys tree except in bogusly commented out code in coda.
and given a value, but never used. This has no effect on the
resulting binaries, since gcc optimizes the variable away anyway.
PR: kern/62684
Approved by: rwatson (mentor)
data for the file system on which the jail's root vnode is located.
Previous behavior (show data for all mountpoints) can be restored
by setting security.jail.getfsstatroot_only to 0. Note: this also
has the effect of hiding other mounts inside a jail, such as /dev,
/tmp, and /proc, but errs on the side of leaking less information.
called until DEVFS had a chance to initialize. Since DEVFS is mandatory
and things over in that department coincidentally works from without
any initialization now, this is safe.
