trying to run X on some Athlon systems where the BIOS does odd things
(mines an ASUS A7A266, but it seems to also help on other systems).
Here's a description of the problem and my fix:
The problem with the old MTRR code is that it only expects
to find documented values in the bytes of MTRR registers.
To convert the MTRR byte into a FreeBSD "Memory Range Type"
(mrt) it uses the byte value and looks it up in an array.
If the value is not in range then the mrt value ends up
containing random junk.
This isn't an immediate problem. The mrt value is only used
later when rewriting the MTRR registers. When we finally
go to write a value back again, the function i686_mtrrtype()
searches for the junk value and returns -1 when it fails
to find it. This is converted to a byte (0xff) and written
back to the register, causing a GPF as 0xff is an illegal
value for a MTRR byte.
To work around this problem I've added a new mrt flag
MDF_UNKNOWN. We set this when we read a MTRR byte which
we do not understand. If we try to convert a MDF_UNKNOWN
back into a MTRR value, then the new function, i686_mrt2mtrr,
just returns the old value of the MTRR byte. This leaves
the memory range type unchanged.
I have seen one side effect of the fix, which is that ACPI calls
after X has been run seem to hang my machine. As running X would
previously panic the machine, this is still an improvement ;-)
I'd like to MFC this before the 4.6 code freeze - please let me
know if it causes any problems.
PR: 28418, 25958
Tested by: jkh, Christopher Masto <chris@netmonger.net>
MFC after: 2 weeks
trying to run X on some Athlon systems where the BIOS does odd things
(mines an ASUS A7A266, but it seems to also help on other systems).
Here's a description of the problem and my fix:
The problem with the old MTRR code is that it only expects
to find documented values in the bytes of MTRR registers.
To convert the MTRR byte into a FreeBSD "Memory Range Type"
(mrt) it uses the byte value and looks it up in an array.
If the value is not in range then the mrt value ends up
containing random junk.
This isn't an immediate problem. The mrt value is only used
later when rewriting the MTRR registers. When we finally
go to write a value back again, the function i686_mtrrtype()
searches for the junk value and returns -1 when it fails
to find it. This is converted to a byte (0xff) and written
back to the register, causing a GPF as 0xff is an illegal
value for a MTRR byte.
To work around this problem I've added a new mrt flag
MDF_UNKNOWN. We set this when we read a MTRR byte which
we do not understand. If we try to convert a MDF_UNKNOWN
back into a MTRR value, then the new function, i686_mrt2mtrr,
just returns the old value of the MTRR byte. This leaves
the memory range type unchanged.
I'd like to merge this before the 4.6 code freeze, so if people
can test this with XFree 4 that would be very useful.
PR: 28418, 25958
Tested by: jkh, Christopher Masto <chris@netmonger.net>
MFC after: 2 weeks
the .mc file used for /etc/mail/submit.cf. By default,
/etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner
Submitted by: ume
MFC after: 1 week
it with FreeBSD/alpha.
Pictures of DS20L will be available soon at
http://people.freebsd.org/~wilko/Alpha-gallery/
Along with pictures of a ES80 'Marvel' EV7 box (which we don't support
yet :-P )
exhausting the kernel timeout table. Perform the usual gymnastics to
avoid race conditions between node shutdown and timeouts occurring.
Also fix a bug in handling ack delays < PPTP_MIN_ACK_DELAY. Before,
we were ack'ing immediately. Instead, just impose a minimum ack delay
time, like the name of the macro implies.
MFC after: 1 week
hash while holding the lock on a zone. Fix this by doing the allocation
seperately from the actual hash expansion.
The lock is dropped before the allocation and reacquired before the expansion.
The expansion code checks to see if we lost the race and frees the new hash
if we do. We really never will lose this race because the hash expansion is
single threaded via the timeout mechanism.
Satoshi NIIMI-san kindly explained that EUC does not limit the byte length to
any arbitrary number.
We now set the limit to the maximum octet length of the codeset and it is
locale-specific.
Submitted by: Yong-Jhen Hong <winard@ms11.url.com.tw>
The extra microphone channel capability is part of the "normal" ac97
capabilities and not an extended ac97 capability. Now recording on
codecs without a seperate mic channel works.
MFC after: 1 week
o Use chunk instead of region when we talk about a memory range.
Region can be confused with region register and we already
call it chunk in machdep.c
o Update the twiddle every 16MB
With rev 1.7 one cannot build src/bin/sh -- because make fails to create
the buildtools before trying to use them. Actually it does compile the
buildtools into .o's before trying to use them, but not all the way into
binaries.
Fortunately we have no large zones with maximums specified yet, so it wasn't
breaking anything.
Implement blocking when a zone exceeds the maximum and M_WAITOK is specified.
Previously this just failed like the old zone allocator did. The old zone
allocator didn't support WAITOK/NOWAIT though so we should do what we
advertise.
While I was in there I cleaned up some more zalloc logic to further simplify
that code path and reduce redundant code. This was needed to make the blocking
work properly anyway.
Since then we have living with a GPL'ed find(1) due to grabbing getdate.y
from src/contrib/cvs and its user of the GPL'ed xtime.h. I don't even want
to think about how this could have affected people using our source base.
Would it have been too much trouble to do then what I did now?
Copied getdate.y (public domain) to usr.bin/find and change to use
standard system headers. find(1) now compiles simply with out having
to go to extra effort to do so.
Pointed hat to: phk
Build fixed on: gcc 3.1 using platforms
we can use td_ucred.
- In killpg1(), the proc lock is sufficient to check if p_stat is SZOMB
or not. We don't need sched_lock.
- Close some races in psignal(). In psignal() there is a big switch
statement based on p_stat. All the different cases are assuming that
the process (or thread) isn't going to change state out from under it.
To ensure this is true, just lock sched_lock for the entire switch. We
practically held it the entire time already anyways. This also
simplifies the locking somewhat and actually results in fewer lock
operations.
- Allow signotify() to be called with the sched_lock held since psignal()
now does that.
- Use td_ucred in a couple of places.
process so it can use td_ucred.
- Require the target process of donice() to be locked when donice() is
called.
- Use td_ucred.
- Lock the target process of p_cansee() and while reading the credentials
of a process.
- Change the logic of rtprio() slightly so it does it's copyin() if needed
prior to locking the target process.
- rtprio() no longer needs Giant. In theory with full KSE it would still
need Giant to protect p_ucred of curproc for the p_canfoo() functions
but p_canfoo() will be changing to using td_ucred of curthread before
full KSE hits the tree.
of a process pointer.
- Move the p_candebug() at the start of procfs_control() a bit to make
locking feasible. We still perform the access check before doing
anything, we just now perform it after acquiring locks.
- Don't lock the sched_lock for TRACE_WAIT_P() and when checking to see if
p_stat is SSTOP. We lock the process while setting p_stat to SSTOP
so locking the process is sufficient to do a read to see if p_stat is
SSTOP or not.
allocate a blank cred first, lock the process, perform checks on the
old process credential, copy the old process credential into the new
blank credential, modify the new credential, update the process
credential pointer, unlock the process, and cleanup rather than trying
to allocate a new credential after performing the checks on the old
credential.
- Cleanup _setugid() a little bit.
- setlogin() doesn't need Giant thanks to pgrp/session locking and
td_ucred.
