This support appears to have been documented in nsswitch.conf(5) for some
time. The implementation adds two NSS netgroup providers to libc. The
default, compat, provides the behaviour documented in netgroup(5), so this
change does not make any user-visible behaviour changes. A files provider
is also implemented.
innetgr(3) is implemented as an optional NSS method so that providers such
as NIS which are able to implement efficient reverse lookup can do so.
A fallback implementation is used otherwise. getnetgrent_r(3) is added for
convenience and to provide compatibility with glibc and Solaris.
With a small patch to net/nss_ldap, it's possible to specify an ldap
netgroup provider, allowing one to query nisNetgroupTriple entries.
Sponsored by: EMC / Isilon Storage Division
leapfile will be ignored and ntpd will behave as if it has no
leapfile.
While here, remove an extraneous blank line.
Suggested by: ache
MFC after: 1 week
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.
This seems to be related to the previously-reported issues
with files within /etc in the past.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
Files listed in 'CONFS' are not properly included in new
installations (missing from base.txz), for reasons I still
do not fully understand.
This reverts the change excluding /etc/ppp/ppp.conf from
a new installation. /etc/dma/dma.conf is also affected,
but requires a different solution, still being investigated.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
ldconfig is already required by mountcritremote indirectly, as noted by rcorder:
> rcorder: Circular dependency on provision `mountcritremote' in file `ldconfig'.
Having mountcritremote REQUIRE ldconfig breaks dependency ordering.
Making the ldconfig hints be conditionally regenerated from mountcritremote when
remote filesystems are mounted is done after this change, similar to cleanvar
being conditionally called after the change.
Differential Revision: https://reviews.freebsd.org/D6621
PR: 202726
Reviewed by: jilles
Sponsored by: EMC / Isilon Storage Division
As noted in the PR, if etc/rc.d/zvol is removed, netif will be run before
hostid, and the MAC address generated for any bridge devices will be
non-deterministic. Make the MAC address generated be deterministic for
bridge devices by explicitly REQUIRE'ing hostid.
This fixes up the rest of the PR, inadvertently committed in r299844
MFC after: 1 week
PR: 195188
Sponsored by: EMC / Isilon Storage Division
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
Always create loopback routes on every fib, for both IPv4 and IPv6
etc/rc.d/routing
Create loopback IPv4 and IPv6 routes on every fib at boot. Revert
278302; now that all FIBs have IPv6 loopback routes, the
"route add -reject" commands won't fail.
tests/etc/rc.d/routing_test.sh
Greatly simplify static_ipv6_loopback_route_for_each_fib. It was
written under the assumption that loopback routes would be added to
a given fib by the kernel as soon as an interface is configured on
that fib. However, the logic can be much simpler now that we simply
add loopback routes to all fibs at boot. This also removes the need
to run the test as root, removes the restriction that
net.add_addr_allfibs=0, and removes the need to configure fibs in
kyua.conf.
Also, add a test case for IPv4 loopback routes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6582
periodic(8) already handles the security_show_{success,info,badconfig}
variables correctly. However, those variables aren't explicitly set in
/etc/defaults/periodic.conf or anywhere else, which suggests to the user
that they shouldn't be used.
etc/defaults/periodic.conf
Explicitly set defaults for security_show_{success,info,badconfig}
usr.sbin/periodic/periodic.sh
Update usage string
usr.sbin/periodic/periodic.8
Minor man page updates
One thing I'm _not_ doing is recommending setting security_output to
/var/log/security.log or adding that file to /etc/newsyslog.conf, because
periodic(8) would create it with default permissions, usually 644, and
that's probably a bad idea.
Reviewed by: brd
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6477
NO leap second will be introduced at the end of June 2016.
This commit reapplies the r298887 minor spelling fix.
Obtained from: ftp://tycho.usno.navy.mil/pub/ntp/.
See also: http://www.iers.org/SharedDocs/News/EN/BulletinC.html
MFC after: 2 weeks
Remove routed as a requirement in NETWORKING, and put it in routed as a BEFORE
requirement instead
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
`BEFORE: netif` was already in etc/rc.d/atm1, so no additional changes
are needed in that script
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Use BINDIR instead of FILESDIR
- Default all <FILESGROUPS>MODEs to BINMODE with a single for-loop at the
bottom of the Makefile
- Move all of the conditionals under the relevant MK_* != no build conditional
blocks
Sponsored by: EMC / Isilon Storage Division
convname and dst are guaranteed to be non-NULL by iconv_open(3).
src is an array. Remove these tests for NULL pointers.
While I'm here, eliminate a strlcpy with a correct but suspicious-looking
calculation for the third parameter (i.e. not a simple sizeof).
Compare the strings in-place instead of copying.
Found by: bdrewery
Found by: Coverity
CID: 1130050, 1130056
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6338
Update libarchive to 3.2.0
New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive
Patched files (fixed compiler warnings):
contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)
MFC after: 1 month
Relnotes: yes
This fixes mounting (non-root) USB drives on boot with fsck enabled
(with non-zero 'Pass#' field in fstab(5)).
Reported by: Graham Menhennitt <graham at menhennitt.com.au>
Reviewed by: jilles@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6221
After a discussion on freebsd-fs@ there seemed to be a consensus that
the "-S" option for mountd should become the default.
Since the only known issue w.r.t. using "-S" was fixed by r299201,
this commit adds "-S" to the default mountd_flags.
Discussed on: freebsd-fs
PR: 9619, 131342, 206855
MFC after: 2 weeks
Relnotes: yes
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
Make kdc run BEFORE SERVERS instead of being REQUIREd by SERVERS,
so systems that pedantically check REQUIREs function after r270782
MFC after: 1 week
X-MFC with: r270782
Sponsored by: EMC / Isilon Storage Division
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.
Sponsored by: Gandi.net
